Electronic Devices and Semiconductor Manufacturing Commons^™

Investigation Of The Interfacial Energy Level Within Organic Semiconducting Devices, Wong Wah Seng

Student Works (2020-2029)

This main goal of this research is investigating the interfacial energy level of organic semiconducting devices by correlated to the devices performance as well as physical/chemical change in the blended/mixed organic semiconductor system. The first project reported the high efficiency extra warm white organic light emitting diodes (WOLEDs) by blending tris(4-carbazoyl-9-ylphenyl)amine (TcTa) to poly(vinylcarbazole) (PVK). The hole current for PVK:TcTa (60:40) increased by one order of magnitude in hole only device, but the current efficiency of WOLEDs improved only by 7% compared to pristine PVK. Using Ultraviolet photoelectron spectroscopy (UPS), it was discovered the hole injection barrier between poly(3,4-ethylenedioxythiophene) polystyrene …

Study Of Schottky And Poole-Frenkel Conduction Mechanism In Fe304-Gamma-Fe2o3/Sio2/N-Type Si System, Adrian Chung Ning Hann

Student Works (2020-2029)

The advances of metal oxide semiconductor technology (MOS) have led to smaller devices being made where sizes of the devices keep getting smaller and compact. Hence, all the components of metal oxide semiconductor sizes are to be reduced without affecting the overall efficiency of the metal oxide semiconductor. However, there is a problem in the silicon dioxide component of MOS as the sizes of the silicon oxide (SiO2) reduces, there is a possibility a current leakage to occur due to carrier direct tunneling effect passing through SiO2 which reduce the efficiency of the MOS. Therefore, a higher dielectric constant material …

Risk Management Decision Making For Security And Trust In Hardware Supply Chains, Zachary A. Collier, Thomas L. Polmateer, James H. Lambert

CESUN Conference

Modern cyber-physical systems are enabled by electronic hardware and embedded systems. The security of these sub-components is a concern during the design and operational phases of cyber-physical system life cycles. Compromised electronics can result in mission-critical failures, unauthorized access, and other severe consequences. As systems become more complex and feature greater connectivity, system owners must make decisions regarding how to mitigate risks and ensure resilience and trust. This paper provides an overview of research efforts related to assessing and managing risks, resilience, and trust with an emphasis on electronic hardware and embedded systems. The research takes a decision-oriented perspective, drawing …

Dual-Band Doherty Power Amplifier With The Improvement Of Reactance Compensation Technique For Lte Frequency Operations, Yu Li Ming

Student Works (2020-2029)

A dual-band selection of Doherty power amplifier employing a Reactance Compensation Technique (RCT) with Gallium Nitride High-Electron-Mobility-Transistor (GaN HEMT) technology is presented. In this dissertation, the focus has been given to the design power amplifier in Doherty configuration, where it can operate at dual-band frequency and enhanced performances at 6 dB back-off from saturation power. This project applied lossy matching circuit for the input matching network and incorporated the primary motivation of using RCT and third harmonic tuning for the output matching network. The DPA designed can achieve satisfying results for the frequency of 0.8 and 2.1 GHz. The implementation …

Up-And-Coming Advances In Optical And Microwave Nonreciprocity: From Classical To Quantum Realm, Sergey V. Kutsaev, Alex Krasnok, Sergey N. Romanenko, Alexander Yu. Smirnov, Kirill Taletski, Vyacheslav P. Yakovlev

Advanced Science Research Center

Reciprocity is a fundamental physical principle that roots in the time-reversal symmetry of physical laws. It allows making predictions on any arbitrary complex system's response and operation and hence simplifies the analysis. However, there are many practical situations in which it is advantageous to break reciprocity, e.g., isolators preventing wave scattering back to lasers and generators, full-duplex systems for multiplexing transmission and receiving in the same channel, nonreciprocal cavity excitation, and protection of fragile states of superconductor quantum computers from thermal noise. The most widespread approach to time-reversal symmetry breaking and nonreciprocity based on magnetic field biasing suffers from bulkiness, …

Electrospray Deposition Of Zno Nanostructures For Nanoscale Electronic Applications, David Hooks

LSU Master's Theses

Modern technology is ever-evolving and as more emphasis is placed on faster, more sensitive electronic devices, advancements in the field of electronics are as important now as they ever have been. To meet the need for more sensitive devices, it is important to study new semiconducting materials and the applications in which they pose a potential advantage.

The field of electronic materials research falls at the intersection of physics, chemistry, materials science, and electrical engineering. Zinc Oxide (ZnO) is of particular interest in modern electronic devices for its uses in sensing applications, high-powered transistors, and LED technology. ZnO has been …

Thermal Performance Of Algan/Gan Based Power Switching Devices For Transformerless Inverters, Mahesh B. Manandhar

Electronic Theses and Dissertations

Wide Bandgap (WBG) semiconductors like Silicon Carbide (SiC), Gallium Nitride (GaN) and Aluminum Gallium Nitride (AlGaN) have superior material properties as compared to Silicon (Si) like higher electrical breakdown voltages and bandgap energies as well as lower leakage currents as compared to Si which make them ideal to operate at higher voltage with lower thermal losses. These properties make WBG materials ideal for power devices like Vertical Double-diffused Metal Oxide Semiconductor Field Effect Transistors (VDMOSFETs). The use of digital prototyping through computer simulation increases the speed and flexibility of the design iterations while reducing the cost and time required for …

Characterization, Analysis, And Application Of Wbg Power Devices For Future Power Conversion Systems, Ali Mahmoud Salman Al-Bayati

Electronic Theses and Dissertations

Semiconductor power devices are the most momentous constituents of any power converter system. Fast switching, compactness, high performance and efficiency, and high temperature operation are the exacting challenges experienced by conventional silicon (Si) power device based power converters in many applications. In this dissertation, the wide bandgap (WBG) power devices are studied and used to transcend the limitations imposed by the Si power devices. It mainly focuses on characterization and analysis of the behavior of WBG power devices as well as design and development of efficient, high performance, and reliable dc–dc power converters based on WBG technology. First, using computer …

Towards Systems On Cloth: The Design, Manufacturing, And Validation Of Open-Source Embroidered Resistors, Somerset Schrock

Dissertations, Master's Theses and Master's Reports

This thesis is focused on advancing embroidered wearable electronics and textile electronics by creating open-source flexible resistors. Advancements in textile electronics could usher a new generation of smart devices that are entirely flexible. Current systems on cloth primarily use rigid components, which limits the flexibility and comfort of using the fabric devices. To advance this field, I propose a novel method of creating flexible electrical resistors with embroidery. To realize this technology, I created an open-source tool to create embroidery files for machine fabrication. This thesis details the methods and tools created for resistor fabrication. The resistors were tested to …

Doping Graphene With Substitutional Mn, Pin-Cheng Lin, Renan Villarreal, Simona Achilli, Harsh Bana, Maya N. Nair, Antonio Tejeda, Ken Verguts, Stefan De Gendt, Manuel Auge, Hans Hofsäss, Steven De Feyter, Giovanni Di Santo, Luca Petaccia, Steven Brems, Guido Fratesi, Lino M. C. Pereira

Advanced Science Research Center

We report the incorporation of substitutional Mn atoms in high-quality, epitaxial graphene on Cu(111), using ultralow-energy ion implantation. We characterize in detail the atomic structure of substitutional Mn in a single carbon vacancy and quantify its concentration. In particular, we are able to determine the position of substitutional Mn atoms with respect to the Moiré superstructure (i.e., local graphene-Cu stacking symmetry) and to the carbon sublattice; in the out-of-plane direction, substitutional Mn atoms are found to be slightly displaced toward the Cu surface, that is, effectively underneath the graphene layer. Regarding electronic properties, we show that graphene doped with substitutional …

Smart Nails For Lithium-Ion Battery Internal Short Circuit And Thermal Runaway Characterization, Mary Kate Long, Siyi Liu

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Development Of Fiber-Optic High-Temperature Heat Flux Sensors For Venus Exploration, Sara Mog

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Fabrication And Simulation Of Perovskite Solar Cells, Maniell Workman

Theses and Dissertations--Electrical and Computer Engineering

Since the dawning of the industrial revolution, the world has had a need for mass energy production. In the 1950s silicon solar panels were invented. Silicon solar panels have been the main source of solar energy production. They have set the standard for power conversion efficiency for subsequent generations of photovoltaic technology. Solar panels utilize light’s ability to generate an electron hole pair. By creating a PN Junction in the photovoltaic semiconductor, the electron and hole are directed in opposing layers of the solar panel generating the electric current. Second generation solar panels utilized different thin film materials to fabricate …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Perovskite Thin Films Annealed In Supercritical Fluids For Efficient Solar Cells, Gilbert Annohene

Theses and Dissertations

In the field of photovoltaics, scientists and researchers are working fervently to produce a combination of efficient, stable, low cost and scalable devices. Methylammonium lead trihalide perovskite has attracted intense interest due to its high photovoltaic performance, low cost, and ease of manufacture. Their high absorption coefficient, tunable bandgap, low-temperature processing, and abundant elemental constituent provide innumerable advantages over other thin film absorber materials. Since the perovskite film is the most important in the device, morphology, crystallization, compositional and interface engineering have been explored to boost its performance and stability. High temperatures necessary for crystallization of organic-inorganic hybrid perovskite films …

Treated Hfo2 Based Rram Devices With Ru, Tan, Tin As Top Electrode For In-Memory Computing Hardware, Yuvraj Dineshkumar Patel

Theses

The scalability and power efficiency of the conventional CMOS technology is steadily coming to a halt due to increasing problems and challenges in fabrication technology. Many non-volatile memory devices have emerged recently to meet the scaling challenges. Memory devices such as RRAMs or ReRAM (Resistive Random-Access Memory) have proved to be a promising candidate for analog in memory computing applications related to inference and learning in artificial intelligence. A RRAM cell has a MIM (Metal insulator metal) structure that exhibits reversible resistive switching on application of positive or negative voltage. But detailed studies on the power consumption, repeatability and retention …

Possibilities And Challenges Of Radio Frequency Energy Harvesting In Dar Es Salaam, Tanzania, Fredrick Isingo

Tanzania Journal of Engineering and Technology (TJET)

This paper presents investigation on the possibilities and challenges of harvesting ambient Radio Frequency Energy (RFE) at Dar es Salaam region in Tanzania. The Radio Frequency (RF) signals were measured using a Rohde and Schwarz FSC 3 spectrum analyzer observing available frequencies with their respective power. Among several RF signals received, the most powerful signals observed were; 800 MHz, 950 MHz, 2100 MHz and 2400 MHz, having average signal strengths of about-30.29 dBm,-35.94 dBm,-42.90 dBm and-30.42 dBm respectively. The power possessed within these frequencies were suitable to be harvested due to their signal strengths, an overall power average of-34.89dBm was …

A Bibliometric Survey On Ultra Wideband Multiple Input Multiple Output Antenna With Improved Isolation, Laxmikant K. Shevada, Hema D. Raut, Rajeshwari R. Malekar, Amruta S. Dixit, Sumit Kumar

Library Philosophy and Practice (e-journal)

Ultra wideband (UWB) technology remains a viable choice for very high speed data communication in future applications involving large bandwidth. For boosting the data communication efficiency and to mitigate the multipath fading issue faced by UWB system with existing narrowband systems, Multiple Input Multiple Output (MIMO) antenna system is used along with UWB. Mutual coupling which must be smaller in value plays a vital role in deciding the efficiency of MIMO antenna and hence it becomes as important aspect. The mutual coupling reduction techniques of various UWB MIMO antennas are surveyed in this bibliometric paper. The bibliometric survey aims to …

Technique Design Of Filter On Surface-Acoustic Waves, Dilmurod Abdujalilovich Davronbekov, Zafar Tulyaganovich Khakimov

Acta of Turin Polytechnic University in Tashkent

The article describes the design of filters on surface acoustic waves (SAWs), which are selective elements and are widely used in blocks, devices and signal processing systems in telecommunications, including wireless communication systems such as cellular, trunking and others. Designs of filters for surfactants are considered, which are divided into two large groups - by functional purpose and by a systematic approach to the synthesis of performance characteristics of filters for surfactants. Optimization algorithms and methods for synthesizing surfactant filters have been developed and improved. An improved technique for the synthesis of a filter based on surface acoustic waves is …

Design, Fabrication, And Reliability Effects Of Additively Manufactured First Level Compliant Interconnects For Microelectronics Application, Tumininu David Olatunji

Graduate Theses and Dissertations

Semiconductor packaging and development is greatly dependent on the magnitude of interconnect and on-chip stress that ultimately limits the reliability of electronic components. Thermomechanical related strains occur because of the coefficient of thermal expansion mismatch from different conjoined materials being assembled to manufacture a device. To curb the effect of thermal expansion mismatch between conjoined parts, studies have been done in integrating compliant structures between dies, solder balls, and substrates. Initial studies have enabled the design and manufacturing of these structures using a photolithography approach which involves a high number of fabrication steps depending on the complexity of the structures …