Electrical and Electronics Commons^™

Stability Analysis Of Negative Resistance-Based Source Combining Power Amplifiers, Hannah S. Homer

Master's Theses

An investigation into the stability of negative resistance-based source combining power amplifiers is conducted in this thesis. Two different negative resistance-based source combining topologies, a series and parallel version, are considered. Stability is analyzed using a simple and intuitive broadband approach that leverages linear circuit stability criterion and two different linearization methods: linearization around the operating point and in the frequency domain. Using this strategy, it is shown that conditions for self-sustained oscillation exist for both topologies. For the series combining topology, self-sustained oscillation is prevented by means of injection locking.

Design And Fabrication Techniques Of Devices For Embedded Power Active Contact Lens, Errol Heradio Leon

Master's Theses

This thesis designed and fabricated various devices that were interfaced to an IC for an active contact lens that notifies the user of an event by detection of an external wireless signal. The contact lens consisted of an embedded antenna providing communication with a 2.4GHz system, as well as inductive charging at an operating frequency of 13.56 MHz. The lens utilized a CBC005 5µAh thin film battery by Cymbet and a manufactured graphene super capacitor as a power source. The custom integrated circuit (IC) was designed using the On Semiconductor CMOS C5 0.6 µm process to manage …

Teaching Matlab And C Programming In First Year Electrical Engineering Courses Using A Data Acquisition Device, Phillip Wong, Branimir Pejcinovic

Electrical and Computer Engineering Faculty Publications and Presentations

Our industry partners often voice a complaint that our newly graduated electrical engineering (EE) students do not have sufficient programming skills. This is not a new concern. In a traditional undergraduate EE curriculum, one or two programming courses compose the entirety of the student’s training in programming. The courses may be taught by the computer science department without significant emphasis on engineering fundamentals. While the principles of computer science may be well covered, the ability to apply the knowledge to practical engineering problems is frequently lacking. To compound the problem, teaching novices the basics of programming can be very challenging …

Optimization Methods For Active And Passive Localization, Nil Garcia

Dissertations

Active and passive localization employing widely distributed sensors is a problem of interest in various fields. In active localization, such as in MIMO radar, transmitters emit signals that are reflected by the targets and collected by the receive sensors, whereas, in passive localization the sensors collect the signals emitted by the sources themselves. This dissertation studies optimization methods for high precision active and passive localization.

In the case of active localization, multiple transmit elements illuminate the targets from different directions. The signals emitted by the transmitters may differ in power and bandwidth. Such resources are often limited and distributed uniformly …

Hollow Cathode Sputtering System - Installation, Operation And Theoretical Background, Sebastian Falk

Theses

The objective of this work was to assemble, install and operate a hollow cathode sputtering system (HCSS). Therefore a complex vacuum system was built to create the right sputtering environment. The purpose of the HCSS is to develop advanced thin conducting oxides (TCOs) as well as high resistivity transparent (HRT) layers which are used for thin film photovoltaic technology, particularly cadmium telluride based and copper indium gallium selenide based solar cells.

A theoretical background of the thin film technology and a comparison of different deposition methods in regards to the sputtering process is provided. Thereby, an in-depth investigation of zinc …

Review Of Steganalysis Of Digital Images, Xinlei Pan

Theses

Steganography is the science and art of embedding hidden messages into cover multimedia such as text, image, audio and video. Steganalysis is the counterpart of steganography, which wants to identify if there is data hidden inside a digital medium. In this study, some specific steganographic schemes such as HUGO and LSB are studied and the steganalytic schemes developed to steganalyze the hidden message are studied. Furthermore, some new approaches such as deep learning and game theory, which have seldom been utilized in steganalysis before, are studied. In the rest of thesis study some steganalytic schemes using textural features including the …

A Stand-Alone Dna Hybridization Detection System, Sinan S. Sayood

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The goal of this project was to design a portable device that can quickly and accurately detect the difference between single and double stranded DNA. This was accomplished by analyzing the capacitive properties of DNA solutions and implementing a charge-based capacitive monitoring system to detect and analyze the solutions. The detection system was designed without reliance on expensive functionalized electrodes, and instead is able to detect the properties of free- oating DNA. This approach greatly reduces the cost of the materials needed to construct the device. It also decouples the main sensor apparatus from the bulk of the electronics, reducing …

Automatic Classification Of Fish In Underwater Video; Pattern Matching - Affine Invariance And Beyond, Madhuri Gundam, Madhuri Gundam

LSU New Orleans Theses and Dissertations

Underwater video is used by marine biologists to observe, identify, and quantify living marine resources. Video sequences are typically analyzed manually, which is a time consuming and laborious process. Automating this process will significantly save time and cost. This work proposes a technique for automatic fish classification in underwater video. The steps involved are background subtracting, fish region tracking and classification using features. The background processing is used to separate moving objects from their surrounding environment. Tracking associates multiple views of the same fish in consecutive frames. This step is especially important since recognizing and classifying one or a few …

Project Labyrinth: Exploration Of Modulating Guitar Signals, Joseph Andrews, Andrew Patterson

Senior Theses

The overall objective of this project is to create a guitar pre-amplifier in the casing of an effects pedal. The pedal must be able to modulate amplitude and pitch. More specifically, the design for this pedal will include floating frequency filtering, phase shifting, and amplitude modulation.

A Heart Rate Finger Ring And Its Smartphone App Through Customized Nfc, Yang Liu

Graduate Theses - Electrical and Computer Engineering

Population aging has become one of the most critical problems in contemporary society. Families and organizations are striving to provide better healthcare to the elderly and handicapped for their better living conditions. Due to these situations, the demand for remote health monitoring continues to grow rapidly. With the development of new technologies, such as smaller sensors and microcontrollers, the increasing widespread use of smartphones, and new wireless communication methods, a wireless body area network system can be constructed to provide more sophisticated solutions to satisfy this demand. The objective of this thesis is to demonstrate that such a system is …

Segmentation Of Pulmonary Nodules In Computed Tomography Using A Regression Neural Network Approach And Its Application To The Lung Image Database Consortium And Image Database Resource Initiative Dataset, Temesguen Messay, Russell C. Hardie, Timothy R. Tuinstra

Electrical and Computer Engineering Faculty Publications

We present new pulmonary nodule segmentation algorithms for computed tomography (CT). These include a fully-automated (FA) system, a semi-automated (SA) system, and a hybrid system. Like most traditional systems, the new FA system requires only a single user-supplied cue point. On the other hand, the SA system represents a new algorithm class requiring 8 user-supplied control points. This does increase the burden on the user, but we show that the resulting system is highly robust and can handle a variety of challenging cases. The proposed hybrid system starts with the FA system.

If improved segmentation results are needed, the SA …

Development And Verification Of Multi-Level Sub-Meshing Techniques Of Peec To Model High-Speed Power And Ground Plane-Pairs Of Pfbs, Leihao Wei

Graduate Theses - Electrical and Computer Engineering

No abstract provided.

Semi-Automated Switching Regulator Modeling Method And Tool, Michael Heath Leonard

Graduate Theses and Dissertations

This thesis presents the results of research targeted at automating the behavioral modeling process for switching voltage regulators. These regulators are commonly used in many application areas including discrete use in larger systems, integrated in a System on a Chip (SoC), or as the primary use case for a design. When used in an integrated system these regulators can be a significant force in slowing down simulations. A common method for removing this slowdown is to use a behavioral model of the switching regulator.

Creating behavioral models can be very time consuming and requires expertise.

The thesis discussion begins by …

Segmentation Of Pulmonary Nodules In Computed Tomography Using A Regression Neural Network Approach And Its Application To The Lung Image Database Consortium And Image Database Resource Initiative Dataset, Temesguen Messay, Russell C. Hardie, Timothy R. Tuinstra

Electrical and Computer Engineering Faculty Publications

We present new pulmonary nodule segmentation algorithms for computed tomography (CT). These include a fully-automated (FA) system, a semi-automated (SA) system, and a hybrid system. Like most traditional systems, the new FA system requires only a single user-supplied cue point. On the other hand, the SA system represents a new algorithm class requiring 8 user-supplied control points. This does increase the burden on the user, but we show that the resulting system is highly robust and can handle a variety of challenging cases. The proposed hybrid system starts with the FA system. If improved segmentation results are needed, the SA …

Design And Development Of Two Component Hydrogel Ejector For Three-Dimensional Cell Growth, Thomas Dunkle, Jessica Deschamps, Connie Dam

Honors Scholar Theses

Hydrogels are useful in wound healing, drug delivery, and tissue engineering applications, but the available methods of injecting them quickly and noninvasively are limited. The medical industry does not yet have access to an all-purpose device that can quickly synthesize hydrogels of different shapes and sizes. Many synthesis procedures that have been developed result in the formation of amorphous hydrogels. While generally useful, amorphous hydrogels exhibit limited capability in tissue engineering applications, especially due to their viscous properties. This endeavor aims to modulate the appropriate gelation parameters, optimize the injection process, and create a prototype that allows for the extrusion …

Reducing Radio Frequency Susceptibilities In Commercial-Off-The-Shelf Camera Equipment For Use In Electromagnetic Compatibility Testing, Kevin Mainini

Electronic Theses and Dissertations

The Technical Testing and Analysis Center (TTAC) Group at Oak Ridge National Laboratory performs electromagnetic compatibility testing on various radiation detection units. These tests require remote viewing of the equipment’s display to monitor its compliance with national and international standards. The Commercial-Off-the-Shelf (COTS) camera equipment that is used to monitor the displays exhibits radio frequency susceptibilities causing issues when determining the actual susceptibilities of the device under test. In order to mitigate this issue, a COTS camera was placed in two common test positions and cycled through three angled orientations with various radio frequency shielding methods applied. The development of …

Evaluating The Level Of Harmonic Distortion In A Typical Distribution Feeder, Wessen S. Bogale

UNLV Theses, Dissertations, Professional Papers, and Capstones

Steady-state analysis of electrical power systems is largely based on linear and sinusoidal AC circuits which allow the concept of impedance, phasors and well-defined power quantities (i.e., real, reactive and apparent powers). In reality, however, the electric load which was once composed of linear elements (e.g., induction motors, incandescent lighting, etc …) is becoming more and more nonlinear due to the wide-spread use of electronic components such as fluorescent lighting and variable-frequency drives that power the majority of electric motors. As a consequence, the current drawn by such devices is often distorted, thus containing a number of high frequency harmonics …

Environmental Reliability Of Thin Film Sealing On Thick Film Ltcc, Charles R. Bourland

Graduate Theses and Dissertations

As electronic components and systems become more intricate and expand into new realms of use case scenarios, new materials systems must be explored. With new systems comes the balancing acts of cost and reliability. Presented here is a thesis that explores a new hybrid-electronics packaging system using low temperature co-fired ceramics, referred to as LTCC. An LTCC system was designed to explore the environmental reliability of numerous thick film LTCC features and parameters. A key element was to explore how a thin film metallization stack up used to cap or seal underlying thick film structures would decrease environmental susceptibility while …

Circularly Polarized Solar Antenna For Airborne Communication Nodes, Oisin O’Conchubhair, Adam Narbudowicz, Patrick Mcevoy, Max Ammann

Articles

A circularly polarized solar cell antenna consisting of four sequentially rotated printed inverted-F antennas is proposed. Four multicrystalline silicon solar cells act as the ground plane and the antenna is suitable for low power airborne communication nodes and wireless sensor networks. The antenna design was developed to allow 100% insolation of the cells when directly facing a light source. The low-profile antenna minimises shadowing of the solar cell for oblique angle insolation.

Long Term Synchronization Of Wireless Sensors, Priyanka Madhushri

Research Horizons Day Posters

No abstract provided.