Electrical and Electronics Commons^™

The Dc House Project: Electrical System Design & Construction, John Bradley

Electrical Engineering

This project entails the design and assembly of the photovoltaic system, switchboard panel enclosure, and battery enclosure for the DC House’s main electrical system. The intended purpose of this project is to provide the electrical framework necessary for future students to easily modify and add to this rendition of the DC House. The principle design implements a variety of renewable energy sources, however this senior project only uses solar power in order to maintain a manageable scope. Each of these renewable energy sources are stepped down to a voltage of 24V and input to a Multi Input Single Output DC …

Dual Channel Matrix Switch Audio Receiver, Austin Fox

Electrical Engineering

The Dual Channel Matrix Switch Audio Receiver controls 2 separate audio output channels. Each channel plays any of the system's 3 inputs. This controller enables a user to play two separate audio signals through two separate speaker channels. The system design allows audio input from 2 RCA sources or 1 RCA source and a phono source. The system outputs an audio signal for each output simultaneously at up to 36W on each channel for an 8Ω load. The device allows a user to control the audio input and the volume of each output channel. An Arduino Uno R3 microcontroller interfaced …

Fluid Midi Ribbon Guitar, Noah Baker

Electrical Engineering

This project was developed to create a new electronic instrument based off of a guitar. The design will give the user more chord combinations than are available on a typical guitar, the ability to retune each “string”, and customizable MIDI controller outputs, while trying to retain a similar playing style. The initial design for this project included implementing an onboard synthesizer (analog or digital). This idea was scrapped for time and cost considerations and replaced with MIDI output which will yield user customizable sound through virtual instruments, such as Massive.

Forest Sign Maker, Victor Espinosa Iii, Kevin Ly, Lisa Yip

Mechanical Engineering

Executive Summary:

The Inyo National Forest is arguably one of the most beautiful locations in California, containing natural masterpieces such as Mount Whitney and the Ancient Bristlecone Pine Forest. Despite its magnificence, the Inyo National Forest can be a treacherous region. The Friends of the Inyo take pride in being able to facilitate the viewing experience for all outdoorsmen by maintaining the mountain trails, which includes providing adequate trail signage.

Unfortunately, there is a fundamental issue with the recent state of trail signage in the Inyo National Forest: the rate at which signs are being vandalized or naturally destroyed is …

Smart Water Meter, Jeff Hufford, Eric Adler, Garrett Hall

Mechanical Engineering

No abstract provided.

Veloelectric: Creating A Device That Harvests Energy From Bicycles, Austin Hall, Daniel Stohr, Tj Fox

Mechanical Engineering

Long distance mountain bikers, bike-packers, and many bikers in developing countries rely on electrical devices for safety and communication. These specific groups of people operate in areas with little to no electricity, and often times have no power to sustain their devices. The purpose of this Cal Poly senior project, VeloElectric, was to design, build, and test a kinetic energy harvester for bicycles that can be used to charge common mobile devices via USB. This senior project team created a device that attaches directly to a bicycle and uses vibrations to generate energy, which in turn powers a variety of …

Smart Power Strip, Dannie Alfaro

Electrical Engineering

The Smart Power Strip revolutionizes all common power strips. Users have the ability to remotely toggle the individual outlets on the Smart Power Strip from a smart phone app and can also monitor how much energy the devices connected to the Smart Power Strip consume.

The Electric Reel For Soccer Fields, Stephen Taylor

Electrical Engineering

Painting a soccer field consumes too much time. The process of reeling the string after laying out string along the field needs to improve. As a result, my project addresses improvements in how the workers retrieve the string through the production of an electric reel. This electric reel allows the worker to have control of the speed, direction, and on/off state of the device. Direction control allows the user ability to reel and unwind the string. Variable speed allows the user to control how fast the reel unwinds and reels the string. The device gathers string in an orderly manner …

Permanent Magnet Display System, Xenia Leon Rodriguez

Electrical Engineering

Pacemakers can malfunction when exposed to high magnetic fields. This becomes especially problematic for patients with pacemakers who need MRI scans as MRI machines can subject the pacemaker to damaging magnetic fields. St.Jude Medical, one of the leading biotech companies, is working to make their pacemakers MRI-safe. In order to test their MRI-safe pacemaker designs, they need an automated test apparatus that will collect and report the magnetic field the pacemaker is being exposed to. This report describes the design of such a test system that reads the Tesla intensity the pacemaker is exposed to and wirelessly transmits the data …

Color Amplification, Jose Carrillo, Cynthia Barajas

Electrical Engineering

The goal of this project is to design and implement a hardware version of MIT’s and Cal Poly’s color amplification system. MIT created a software based system named the “Eulerian Video Magnification” that can reveal small variations that cannot be seen with the naked eye by processing the input sequence of the video. The process consists of using a Gaussian pyramid with a Gaussian kernel in order to do spatial decomposition. This process continues until there is one pixel left which then gets amplified and added back onto each pixel of the original frame for reconstruction. The reconstructed signal can …

Phase Locked Loop Integrated Circuit, Scott Buchanan, Jonathan Bonello

Electrical Engineering

No abstract provided.

Sun-Tracking Solar-Powered Led Street Light, Wesley Ballar, Harrison Wong

Electrical Engineering

Street lighting is an essential utility especially in urban and industrialized areas because it provides illumination and safety for vehicles and pedestrians throughout the night. However, street lights are relatively inefficient; they consume large amounts of power from electrical grids and have predetermined operation times that are often non-optimal for the surrounding environment. The Sun-Tracking Solar-Powered LED Street Lamp is a self-sustaining device, built to replace the current lighting sources. The device features sun-tracking capabilities for maximum energy gathering and darkness recognition to establish optimal operation times. The project provides a reliable and enhanced alternative to current street lighting systems.

Innovative Connectivity Ensuring Education (I.-C.E.E.), Luke Cole, Andrew Ma, Nicholas Ross, Daniel Williams

Electrical Engineering

This is the critical design review for the Telepresence/Telerobotic Technology for Children with Disabilities Project by team I.- C.E.E. (Innovative Connectivity Ensuring Education). This report details our telepresence system design for our client (Nathan Stilts) including design choices/justification, testing verification and procedures, and chosen components for implementation. There are seven chapters in total starting with introductory/background information followed by hardware and software design, verification, and testing and concludes with the current status of the project and what future work may need to be included.

Wireless Sensor Mesh Network For Irrigation Systems, Rosana Cheruvelil, Oswaldo Garcia, Nabil Haque, Justin Ignacio, Stanley Thomas

Electrical Engineering

Pepper Oak Farms, a company that grows their own olives for olive oil and has approximately 40,000 olive trees, is in need of an efficient way to monitor the soil and atmospheric conditions that are critical to the cultivation of their trees. The company at the moment only has two sensors and has to manually place the sensors at different locations to collect data on soil moisture and temperature. This is expensive, time consuming, and a lot of effort on the owner’s part to go out on the fields to collect this data. As a solution, the company would like …

Drum Sense: Smart Drum Set, Azra Skeljo

Electrical Engineering

I would like to propose a SMART drum set: a 5-piece acrylic LED drum set with 2 strips of adhesive RGB LEDs under each rim of every drum. Current SMART drum sets are very expensive and come as installable light rings that are attached on the outside of the drum instead of the inside. I have successfully prototyped 1 Floor Tom of the complete set. The LEDs are connected an AC to DC power converter via a six pin MIDI connector and Arduino. The drum set is characterized with a single RGB microcontroller, 5 sets of 150 LEDs, a piezoelectric …

Hydromodus: An Autonomous Underwater Vehicle, Alex Kost, Anu Mahinkanda, Jordan Read

Electrical Engineering

Hydromodus is a student-led multidisciplinary project conceived by Jordan Read designed to provide a low-cost modular hardware and software solution for researchers and scientists. For the scope of the Senior Project class, it is designed to be a baited remote underwater vehicle (BRUV), but the platform is highly modifiable and open-source.

The Development Of A High-Performance Distributed Battery Management System For Large Lithium Ion Packs, Christopher B. Grasberger

Master's Theses

A high performance battery management system (BMS) for large capacity cells was designed, built, and tested in a cycle of three revisions. The BMS was designed for use in applications where the battery pack configuration is unknown: parallel, series, or any combination. Each of the cells is equipped with its own battery management system to allow a peer-to-peer mesh network to monitor the safety of the cell. The BMS attached to each cell also is equipped with a 25A DC/DC converter to perform active balancing between cells in a string. This converter can transfer charge to (or from) a cell …

Adaptive Automotive Lighting Systems, Marc W. Haeberlin

Master's Theses

Over the past few years, the use of LEDs within the automotive and avionic industries has increased due to their high efficiency, durability and wide range of light brightness. As the use of LEDs within these industries grows, a need for reliable, high performance drivers becomes more relevant. Companies are implementing LEDs for applications involving adaptive lighting or simple dimming features. This thesis shows implementation of various non-isolated analog converters integrated with digital dimmers to achieve these adaptive lighting systems. Adaptive lighting systems involve reading an input from an external source (brake pedal or steering wheel) and changing the brightness …

Brain Machine Interface Using Emotiv Epoc To Control Robai Cyton Robotic Arm, Daniel P. Prince, Mark J. Edmonds, Andrew J. Sutter, Matthew Thomas Cusumano, Wenjie Lu, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

The initial framework for an electroencephalography (EEG) thought recognition software suite is developed, built, and tested. This suite is designed to recognize human thoughts and pair them to actions for controlling a robotic arm.

Raw EEG brain activity data is collected using an Emotiv EPOC headset. The EEG data is processed through linear discriminant analysis (LDA), where an intended action is identified. The EEG classification suite is being developed to increase the number of distinct actions that can be identified compared to the Emotiv recognition software. The EEG classifier was able to correctly distinguish between two separate physical movements.

Future …

Universal Programmable Battery Charger With Optional Battery Management System, Michael Duke Desando

Master's Theses

This report demonstrates improvements made in battery charging and battery management technology through the design of a universal programmable battery charger with optional battery management system attachment. This charger offers improvements in charge efficiency and unique battery charging algorithms to charge a variety of battery chemistries with variety of power requirements. Improvements in efficiency result from a synchronous Buck Controller topology as compared to previous universal chargers that use asynchronous Buck-Boost Converter topologies. This battery charger also surpasses current universal battery chargers by offering different charge modes for different battery chemistries. Charge modes provide the user an option between extending …