Controls and Control Theory Commons^™

Accurate Orientation Control Of Tendon Driven Continuum Robots That Exhibit Elasticity, Manu Srivastava

All Dissertations

This dissertation makes new contributions to the modeling and implementation of Tendon Driven Continuum Robots (TDCRs). Specifically, motivated by 3D printing of concrete using a continuum hose robot in construction applications, we focus on TDCRs featuring compliance in the robot backbone and actuating tendons, e.g. surgical robots/endoscopes/catheters with tendon actuation. We expand previous mechanics-based models to show how and why such compliance significantly restricts performance when traditional kinematics-based planning and control techniques are applied.

The main contribution of this work is a new Elasticity Compensation(EC) model that explains why the ad hoc approach of preloading/pretensioning the tendons compensates for compliance …

The Application Of Model Predictive Control On Paralleled Converters For Zero Sequence Current Suppression And Active Thermal Management, Justin Dobey

All Theses

In the field of power electronics, the control of rectifiers is a crucial area of study. Rectifiers are used to convert AC power into DC power, and are commonly used in a wide range of applications, including renewable energy systems, industrial automation, and consumer electronics. However, in medium and high-power systems when multiple rectifiers are connected in parallel to a DC bus, stability issues can arise, including voltage fluctuations, zero sequence circulating current, and thermal imbalance.

Achieving stable DC bus voltage is essential for maintaining the proper functioning of electronic devices, while suppressing zero sequence current is necessary for protecting …

Data-Driven Porosity Prediction For Directed Energy Deposition, Georgia E. Kaufman

Electrical and Computer Engineering ETDs

Stochastic flaw formation leading to poor print quality is a major obstacle to the utility of directed energy deposition (DED), a laser and metal powder-based additive manufacturing technology for construction and repair of custom metal parts. While melt pool temperature variability is known to be a major factor in flaw formation, control schemes to decrease flaw formation are limited by a lack of physics-based models that fully and accurately describe DED. In this work, a stochastic reachability analysis with a data-driven model based on thermal images of the melt pool was conducted to determine the likelihood of violating melt pool …

Topological Interpolation Method For Modeling Dynamic Systems, Isamiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Chemical Technology, Control and Management

The method of simulation structural-complex continuous-discrete control systems is discussed. For simulation and calculation of dynamic processes in continuous-discrete systems topological interpolation method is proposed, based on application of hybrid methods of space of state variables and interpolation of signals. The essence of the method is that the dynamics of the investigated system, considered at the final interval, is broken down into subintervals, on each of which the processes are described by linear ordinary system differential equations. The computational efficiency of the proposed method was evaluated by comparison with standard methods such as the Runge-Kutta-Merson method. The use of this …

Intellectualization Of The Process Of Monitoring Of Complex Technological Productions, Dmitry Semenovich Karpovich, Umidjon Abdimajitovich Ruziev

Chemical Technology, Control and Management

The article deals with the creation of intelligent monitoring systems for complex technological processes. The methods and models of the intellectualization of information processing systems are analyzed. The advantages of using intelligent measuring instruments in monitoring systems are given, which allow obtaining reliable information necessary for the effective control of complex technological processes. The issues of using intelligent measuring instruments in monitoring systems are considered. A block diagram of intelligent monitoring of signal processing of complex production processes has been proposed. An algorithm for parametric correction of intelligent measuring instruments in monitoring systems has been developed. A model of a …

Modeling And Dynamic Correction Of The Thermal Radiation Fluxes Measuring System, Olexander Alekseevich Sytnik, Fatima Mirazizovna Sagatova

Chemical Technology, Control and Management

Temperature measurements are currently an integral part of modern production, in particular, energy, aviation, instrumentation, etc. Therefore, the need to improve the accuracy of measurement, control and regulation of temperature largely determines the technical and economic efficiency of production. The development of reliable methods for temperature control under various conditions and the creation of specific devices is one of the most important tasks of modern instrumentation. The article deals with the issues of solving the problems of modeling and correcting the dynamic characteristics of a system for measuring thermal radiation fluxes using the integral method of signal recovery. For computer …

Investigation Of Magnetic Circuits Of Differential Transformer Displacement Sensors, Sulton Fayzullaevich Amirov, Absaid Khurramovich Sulliev, Shukhrat Azamatovich Sharapov

Chemical Technology, Control and Management

The article examines the magnetic circuits of both existing and developed differential transformer displacement sensors for large linear displacements. These circuits are characterized by a specific distribution structure of magnetic resistance parameters in long ferromagnetic cores and the magnetic capacitance between them. It is shown that in the existing sensor, the distribution of working magnetic flux along the length of the ferromagnetic cores has a nonlinear nature, resulting in a nonlinear relationship between the output signal in the form of electromotive force and the input linear displacement of the sensor. It has been established that by selecting the law of …

Current Issues Of The Use Of Artificial Intelligence In The Activities Of Customs Authorities, Jasur Usmonovich Sevinov, Gayrat Rustamovich Khamroev

Chemical Technology, Control and Management

Presents effective methods and solutions to eliminate errors caused by the “human factor” (fatigue, neglect, etc.) as a result of the creation and improvement of automated systems based on artificial intelligence, distinguishing features such as commodity group, weight, dimensions, etc. in relation to goods under customs control. The use of artificial intelligence in customs activities allows: to increase the speed of performing tasks set before customs authorities by increasing productivity, without attracting additional personnel; to eliminate errors caused by the “human factor” (fatigue, neglect, etc.); to free employees from everyday activities and transfer it to solving mainly analytical tasks; to …

Synthesis Of Control Systems With Multilayer Neural Networks Based On Velocity Gradient Methods, Oxunjon Boborayimov, Okyay Kaynak

Chemical Technology, Control and Management

In this manuscripts, the synthesis of control systems with multilayer neural networks based on the speed gradient methods is given. For adjusting the weight coefficients of the base processor element, the gradient method of minimizing the learning criterion is used. A procedure for the synthesis of neural network control systems based on the velocity gradient methods has been developed. This guarantees the stabilization of the system under external limited disturbances that are inaccessible to direct measurement. Taking into account the state vector of the control object in the network learning function ensures the consistency of the processes of setting the …

Prediction Using Fire Data Based On Machine Learning Algorithms, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

In this article, the process of real-time prediction of the dynamics of fire development in non-stationary and gas-fired areas is carried out by developing a real-time prediction method based on artificial intelligence and deep machine learning (Deep Machine Learning) algorithms. The most commonly used KNN algorithm, CVM algorithm, Random Forest algorithm and Naive Bayes algorithm were used for prediction fire situations.

Research And Development Of Intelligent Greenhouse Monitoring And Control System：A Review, Jiang Ru, Zhang Dong

Chemical Technology, Control and Management

Today, smart technologies are rapidly entering various areas of our lives. The role of intelligent technologies in the effective organization of control and management processes in the field of agriculture is incomparable. At the same time, intelligently controlled greenhouses are one of the main elements of agriculture. The article analyzes the importance of smart farming technologies associated with intelligent observing and control systems for greenhouses. These technologies include aspects such as the Internet of Things, artificial intelligence, and intelligent control. Based on the results of the analysis, prospects for the development of a monitoring and control system for a smart …

Poster: Round Trip Time Measurement Over Microgrid Power Network, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

A focus of the Power Systems and Networking communities is the design and deployment of Microgrid (MG) integration systems that ensure that quality of service targets are met for load sharing systems at different endpoints. This paper presents an integrated Microgrid testbed that allows Microgrids endpoints to share their current, voltage and power values using a Network Published Shared Variable (NPSV) approach. We present Round Trip Time (RTT) measurements for time sensitive Microgrid control traffic in the presence of varying background traffic as an example quality of service measurement. Numerical results are presented using a range of different background traffic …

Round Trip Time Measurement Over Microgrid Power Network, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

A focus of the Power Systems and Networking communities is the design and deployment of Microgrid (MG) integration systems that ensure that quality of service targets are met for load sharing systems at different endpoints. This paper presents an integrated Microgrid testbed that allows Microgrids endpoints to share their current, voltage and power values using a Network Published Shared Variable (NPSV) approach. We present Round Trip Time (RTT) measurements for time sensitive Microgrid control traffic in the presence of varying background traffic as an example quality of service measurement. Numerical results are presented using a range of different background traffic …

Crazyflie 2.1 Quadcopter Nonlinear System Identification, Nhat V. Nguyen, Hope Storro, John Plimpton

2023 Symposium

Quadcopters (quad) are used widely in many industries with crucial applications such as infrastructure inspection or package delivery. The Crazyflie 2.1 quad from Bitcraze provides an excellent platform for research and development. In this project, our goal is to perform system identification on the Crazyflie to propose a complete model. A gray box method is explored, which includes leveraging the parameters that are already known, to develop a set of equations. Through theory, simulations, and measurements, a complete quadcopter model is developed.

Integrated Dc Microgrid Testbed For Qos Evaluation, Yasin Emir Kutlu, Ruairí De Fréin, Malabika Basu, Ali Malik

Conference papers

This poster describes the development of an integrated Direct Current (DC) Microgrid (MG) testbed, consisting of power system and computer networking hardware, e.g. Cisco 4331 Integrated Services Routers (ISR) and 500W AC/DC power supplies, to test the Quality of Service (QoS) of MG control packets which are delivered over Layer-2 and Layer-3 networking topologies. It facilitates an examination of control packets between MG end-points, that enable real-time power load sharing, in the presence of background computer network traffic such as video streaming. The effects of difference levels of background traffic on the round trip time of control packets are demonstrated.

Programmable And Modular Dc-Dc Converter, Joshua C. Hutchinson, Elijah M. Gordon

Electrical Engineering

This project considers the design, implementation, and testing of an open-source dc-dc converter for microgrid prototyping. Unlike conventional dc-dc converters that are proprietary and require specialist knowledge, and are usually designed for a single function, the proposed dc-dc converter will comprise of a programmable MCU and a Raspberry Pi (RPi) interface to allow less-skilled consumers to monitor and modify a power converting system. We will develop an open-source library that contains voltage control, current control, maximum power point tracking, and battery charge control profiles. Each library will be easy to implement through a GUI on the Raspberry Pi and will …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Hvac Fan Cooling System Using Modicon M580, Ogbonnaya Okoronkwo Okorie, Nicolas Jens Fache

Electrical Engineering

A common problem that many devices have when operating is overheating. Whether it is operating at full capacity or idle, those devices that we use exert heat to some type of extent. The physical and electronic components of the device can only withstand so much heat before the component becomes damaged. This product provides a method of preventing overheating by being a cooling system for your device. A solution for preventing overheating of the components in these electronic devices is by having some sort of cooling system. Our product’s cooling system will be based on energy efficiency, which means that …

Industrial Automation And Controls Lab: Smart Led Dimmer Control, Trevor J. Beck

Electrical Engineering

Programmable Logic Controllers (PLCs) are rugged industrial computers used extensively in many industries for automation and control. EE 435 is a course being developed to introduce students to PLCs. This project will focus on one section of the course, with the primary objective being to control the brightness of an LED based on input received from an ambient light sensor. The control logic will use a PLC with analog input and output modules to interface with the sensor and actuator hardware. The light sensor will output 4-20mA proportional to the intensity of visible light, measured in lumens. The analog input …

Reaction Wheel Based Rocket Active Spin Stabilization, Tanuj Vemuri

Electrical Engineering

Cal Poly Space Systems is the high-powered and experimental rocketry club at Cal Poly SLO. They aim to design, test, and launch fully integrated launch vehicles. In order to create efficient and reliable vehicles, stabilization systems must be implemented. One parameter that can be actively stabilized is the vehicle’s roll. The roll of the vehicle can have noticeably effects on vehicle performance, as uncontrolled roll leads to decreased system stability in flight. Un-controlled roll can also have negative impacts on the quality of onboard video, which is used for post-flight analysis and marketing.

Reaction wheels are a popular method for …