Polymer Science Commons^™

Synthesis, Characterization And Applications Of Reduced Graphene Oxide And Composite Membranes For Selective Separations And Removal Of Organic Contaminants, Ashish Aher

Theses and Dissertations--Chemical and Materials Engineering

Among the next generation materials being investigated for membrane development, partially reduced Graphene Oxide (rGO) has received increasing attention from the membrane community. rGO-based nanofiltration membranes have shown promising results in applications such as partial desalination, organic contaminant removal, gas-phase separations, and separations from solvent media. rGO offers a unique platform compared to common polymeric membranes since it can be used for separation applications in both aqueous and organic solvent media. An rGO-based platform could also be utilized to synthesize reactive membranes, giving rGO membranes the additional capability of reactively removing organic contaminants. This research focuses on the synthesis of …

The Fabrication And Characterization Of Metal Oxide Nanoparticles Employed In Environmental Toxicity And Polymeric Nanocomposite Applications, Matthew Logan Hancock

Theses and Dissertations--Chemical and Materials Engineering

Ceria (cerium oxide) nanomaterials, or nanoceria, have commercial catalysis and energy storage applications. The cerium atoms on the surface of nanoceria can store or release oxygen, cycling between Ce³⁺ and Ce⁴⁺, and can therefore act as a therapeutic to relieve oxidative stress within living systems. Nanoceria dissolution is present in acidic environments in vivo. In order to accurately define the fate of nanoceria in vivo, nanoceria dissolution or stabilization is observed in vitro using acidic aqueous environments.

Nanoceria stabilization is a known problem even during its synthesis; in fact, a carboxylic acid, citric acid, is …

Production Of Bio-Jet Fuel From Palm Fatty Acid Distillate Over Bi-Functional Copd/Hzsm-12 Catalysts, Jarujit Chaowichitra

Chulalongkorn University Theses and Dissertations (Chula ETD)

Jet fuel is one of the major products from a petroleum refinery, its combustion emissions contribute to global warming. Therefore, bio-jet fuel is introduced to solve this problem. Palm fatty acid distillate (PFAD) is an interesting feedstock for bio-jet fuel production via three reactions including deoxygenation, hydrocracking, and isomerization. In this study, the monometallic (Co and Pd) and bimetallic (CoPd and NiPd) supported on HZSM-12 zeolite with various metal loadings and bimetallic CoPd with various zeolite supports (HZSM-12, HZSM-5, and HY) were investigated in a continuous flow trickle bed reactor. The presence of bimetallic CoPd on HZSM-12 zeolite support enhanced …

Removal Of Trace Olefins From Aromatics With Modified Usy Zeolite And Clays, Sirawit Lertprapaporn

Chulalongkorn University Theses and Dissertations (Chula ETD)

Naphtha reforming is an important raw material for aromatic hydrocarbon products in petrochemical processes. However, aromatic hydrocarbon streams obtained from refinery contain unavoidable trace amounts of olefins as an impurity. The trace olefins must be removed because these undesirable olefins are harmful to the following separation processes. Alkylation reaction has been used to remove olefins with acid catalysts. In this study, clays and zeolites were screened for further modification in order to enhance the catalytic activity of olefins removal. The catalytic activity testing was studied in a batch reactor at 195 ℃ for 6 h under 12 barg. USY was …

Combined Life Cycle Analysis And Material Flow Analysis As A Tool For End Of Life Options Of Used Lubricating Oils, Komsan Toeipomthong

Chulalongkorn University Theses and Dissertations (Chula ETD)

Used lubricating oils are one of the most significant material flows in the economy. After being used, they are typically contaminated with, e.g., heavy metals, which could harm the environments if they are treated improperly. The used oils should be properly treated by reprocessing or recycling which the recyled products can be used to subsitute the production the new product, as a result a net reduction of the environemental impacts. This study aimed to investigate the waste flow and then evaluate the environmental impacts of waste management options using the Material Flow Analysis (MFA, STAN v.2.6.801) and Life Cycle Assessment …

High-Throughput Assessment Of A Novel, Thiol-Acrylate Hydrogel For Tumor Spheroid Synthesis In A Microfluidic Device, Nathan Daniel Kersker

LSU Master's Theses

The extracellular environment plays an important role in regulating cell behavior. The mechanical, structural, and compositional properties of the extracellular matrix can determine the fate of the growing cells. Standard two-dimensional culturing in a flask fails to represent a native cellular environment. To create the native environment suitable for cells, hydrogels were previously studied. One of the most extensively studied synthetic hydrogels was a poly(ethylene glycol diacrylate) (PEGDA) hydrogel. However, the need for UV polymerization may introduce unwanted changes in cell morphology and viability. The hydrogel being proposed was a form of a thiol-acrylate hydrogel that can eliminate this problem …

Controlled Nanomorphology Of Hybrid Organic/Inorganic Multi-Component Composites Through Cooperative Non-Covalent Interactions, Lingyao Meng

Shared Knowledge Conference

Hybrid organic–inorganic nanocomposite polymers, with inorganic nanoparticles embedded in organic matrix have emerged as a special category of multifunctional materials. With rational materials design, these hybrids can show the synergistic effect of the properties from both phases. Homogenous dispersion and orderly arrangement of the organic and inorganic components are key in their functionalities. By controlling the interface and corresponding interfacial interactions between the organic and inorganic entities, we have developed a logical approach to form stable and controlled hybrid nanofiber structures. We demonstrate the formation of hybrid polymer/quantum dots (or iron oxide nanoparticles) nanocomposites through non-covalent interactions (hydrogen bonding, ionic …

Thin-Film Block Copolymers (Bcps) Self-Assembly As Versatile Patterning Scheme For Functional Nanomaterials, Le Zhang

LSU Master's Theses

Nanopattern generation is required for building various structural entities in every production process that involves nanostructures. Advancing nanopatterning technologies play an important role in developing and broadening the current nanopatterning technologies to meet up with the ever-demanding requirements in the realm of smaller feature sizes, smoother line-edge roughness (LER) and facile pattern transfer in pursuit of faster computer processors, better electrocatalysts and more compact and intelligent sensors, etc. Conventionally, patterning needs are heavily relied on photolithography, a technique that dominate chip-making industry for more than 50 years. However conventional photolithography is bounded by inherent resolution limits and difficult to be …

Electrochemical Hydrogenation Of Acetone To Produce Isopropanol Using A Polymer Electrolyte Membrane Reactor, Chen Li, Ashanti M. Sallee, Xiaoyu Zhang, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

Electrochemical hydrogenation (ECH) of acetone is a relatively new method to produce isopropanol. It provides an alternative way of upgrading bio-fuels with less energy consumption and chemical waste as compared to conventional methods. In this paper, Polymer Electrolyte Membrane Fuel Cell (PEMFC) hardware was used as an electrochemical reactor to hydrogenate acetone to produce isopropanol and diisopropyl ether as a byproduct. High current efficiency (59.7%) and selectivity (>90%) were achieved, while ECH was carried out in mild conditions (65 degrees C and atmospheric pressure). Various operating parameters were evaluated to determine their effects on the yield of acetone and …

Interface Model Of Pem Fuel Cell Membrane Steady-Dtate Behavior, Russell L. Edwards, Ayodeji Demuren

Mechanical & Aerospace Engineering Faculty Publications

Modeling works which simulate the proton-exchange membrane fuel cell with the computational fluid dynamics approach involve the simultaneous solution of multiple, interconnected physics equations for fluid flows, heat transport, electrochemical reactions, and both protonic and electronic conduction. Modeling efforts vary by how they treat the physics within and adjacent to the membrane-electrode assembly (MEA). Certain approaches treat the MEA not as part of the computational domain, but rather an interface connecting the anode and cathode computational domains. These approaches may lack the ability to consistently model catalyst layer losses and MEA ohmic resistance. This work presents an upgraded interface formulation …

Developing Strategies To Toughen Bio-Inspired Adhesives, Narelli P. Narciso, Samuel Lee Huntington, Jonathan J. Wilker

The Summer Undergraduate Research Fellowship (SURF) Symposium

Mussels and other marine creatures adhere very well in underwater environments, having the ability to withstand the force of the sea. These animals have inspired synthetic biomimetic adhesives for wet systems, presenting potential for biomedical applications. However, most current commercial adhesives tend to be brittle, not resisting repetitive movements. This study assesses toughening strategies to improve the mussel-inspired adhesives’ ductility while maintaining its strength. The strategies included altering the polymer’s chemical structure by changing the percentage of polyethylene glycol (PEG) in the molecule and by adding fillers, such as calcium carbonate, silica and nacre - a calcium carbonate compound found …

Comparative Study Of Different Sensor Array Designs Involving Plasticized Polymer Coatings For Btex Detection In Water, Nicholas Post

Master's Theses (2009 -)

Detection and quantification of benzene, toluene, ethylbenzene, and xylenes (BTEX) in liquid phase is of interest because of the significant public health hazards posed by these compounds. BTEX are volatile organic compounds (VOCs) commonly used as additives in gasoline. Shear horizontal surface acoustic wave (SH-SAW) devices have shown promise in liquid phase sensing applications and is used to address this problem. SH-SAW devices can be made chemically sensitive by depositing a polymer coating on the device surface. SH-SAW devices coated with commercially available polymers have shown modest sensitivity to BTEX compounds. However, there are few polymers which exhibit the properties …

Synthesis Of Double Network Hydrogels Which Can Be Shaped Freely, Natsuki Morimoto, Norie Kato

The International Student Science Fair 2018

Double network (DN) hydrogels have specific characters such as flexibility and high mechanical strength. They are expected to use biomaterials such as artificial cartilages and meniscuses. The purpose of this study is to synthesize DN gels which can be shaped freely. DN gels were synthesized by polyvinyl alcohol (PVA) as a mold, 2-acrylamide-2-methylpropane sulfonic acid (AMPS) as a first monomer, N,N’-methylene-bis-acrylamide (MBAA) as a crosslinker, 2-oxoglutalic acid (OGA) as an initiator and acrylamide (AAm) as a second monomer. First, PVA (polymerization degree; 2000) was dissolved in the water and prepared to 15 % of aqueous solution. It was poured in …

An Entirely New Molecular Glue For Mof Using Unusual Structural Transformation Of A Coordination Polymer, Sukwoo Jung, Hangyeol Kim, Junseok Ahn

The International Student Science Fair 2018

In this research, an entirely new molecular glue is reported. This ‘coordination polymer glue’ is synthesized from zinc metal and BDC-NPE(2,5-bis{4-[1-(4-nitrophenyl)ethylamino]butoxy}terephthalic acid). Molecular glue transforms from 1D coordination polymer to a 3D cross-linked framework, resulting in a phase change of solution to solid. The carboxylate group of this glue makes the preformed MOF bind to its framework. Therefore, when the solution of molecular glue is mixed with preformed MOF powder and heated, homogeneous and thin MOF film – MOF/ZnNPE film – is fabricated. The film is irrelevant to the kind of its substrate, and its thermal stability was enhanced in …

An Entirely New Molecular Glue For Mof Using Unusual Structural Transformation Of A Coordination Polymer, Sukwoo Jung, Hangyeol Kim, Junseok Ahn

The International Student Science Fair 2018

In this research, an entirely new molecular glue is reported. This ‘coordination polymer glue’ is synthesized from zinc metal and BDC-NPE(2,5-bis{4-[1-(4-nitrophenyl)ethylamino]butoxy}terephthalic acid). Molecular glue transforms from 1D coordination polymer to a 3D cross-linked framework, resulting in a phase change of solution to solid. The carboxylate group of this glue makes the preformed MOF bind to its framework. Therefore, when the solution of molecular glue is mixed with preformed MOF powder and heated, homogeneous and thin MOF film – MOF/ZnNPE film – is fabricated. The film is irrelevant to the kind of its substrate, and its thermal stability was enhanced in …

A Proposed Process And Economic Analysis For A Manufacturing Facility For Nylon 6,6, Perry Doles

Chemical Engineering Undergraduate Honors Theses

The global nylon market is a multi-billion-dollar industry that has been thriving in recent years due to advances in the process technology and its flexibility as a material. Nylon 6,6 is a versatile material with uses in many industries because of its ability manipulated into many forms. It is commonly used in applications that require heat resistance, chemical resistance, and high mechanical strength. It is commonly used in luggage, car parts, carpets, and many other plastic products that require the properties that nylon 6,6 exhibits. The versatility and demand for nylon 6,6 make it an attractive process for many potential …

Biocompatible, Responsive Polysoaps Via Raft Copolymerization For The Delivery Of Model Cancer Therapeutics, Mason Dearborn

Honors Theses

Many chemotherapeutic drugs are small, hydrophobic molecules that require water-soluble, biocompatible nanocarriers for enhanced vascular circulation. Existing polymeric carriers either conjugate the drug along a copolymer backbone or sequester drugs within a protected interior domain to be delivered to specific sites in the body. Such therapeutic systems must overcome a myriad of hurdles, beginning with complex, multi-step syntheses, followed by other inherent barriers that limit the efficiency of drug delivery at the targeted site. This work aims to circumvent a number of these issues using biocompatible, stimuli-responsive polysoaps that are capable of unimeric micelle formation, hydrophobic drug delivery, and triggered …

Polymer Nanocomposites Containing High Aspect Ratio Particulates: Innovation In Co-Extruded Multilayer Barrier Films, Kevin Meyers

Dissertations

Delaminated montmorillonite (MMT) clay/ maleic anhydride grafted LLDPE nanocomposite multilayer films with alternating layers of LDPE were produced through multilayer co-extrusion. The MMT concentration within the nanocomposite layers was increased through annealing the films in the melt due to a mismatch in interdiffusion rates of the polymer layers. Analysis of the nanocomposite layers upon annealing revealed that the platelets impinged upon one another resulting in significant improvement in oxygen barrier in the multilayer system, exceeding the results of bulk nanocomposites.

Model analysis demonstrated that increasing the nanoplatelet aspect ratio or initial concentration in the filled layers would lead to even …

Highly Flame Retardant And Bio-Based Rigid Polyurethane Foams Derived From Orange Peel Oil, Chunyang Zhang

Electronic Theses & Dissertations

Polyurethane is an important class of polymer which is being used for various industrial applications in the form of rigid foams, flexible foams, thermoplastic, elastomer, coating, and adhesive. Especially there is a huge market for rigid polyurethane foams for their applications as thermal insulating material in building and housing. In general, polyurethanes are prepared using polyols and diisocyanates. Most of the polyols used by industries are petrochemical based. In this project, a novel polyol from an orange peel oil-based derivative, limonene dimercaptan, was synthesized using one step photochemical thiol-ene reaction. The synthesized polyol was used to prepare flame retardant polyurethane …

Multienzyme Immobilized Polymeric Membrane Reactor For The Transformation Of A Lignin Model Compound, Rupam Sarma, Md. Saiful Islam, Mark P. Running, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

We have developed an integrated, multienzyme functionalized membrane reactor for bioconversion of a lignin model compound involving enzymatic catalysis. The membrane bioreactors were fabricated through the layer-by-layer assembly approach to immobilize three different enzymes (glucose oxidase, peroxidase and laccase) into pH-responsive membranes. This novel membrane reactor couples the in situ generation of hydrogen peroxide (by glucose oxidase) to oxidative conversion of a lignin model compound, guaiacylglycerol-β-guaiacyl ether (GGE). Preliminary investigation of the efficacy of these functional membranes towards GGE degradation is demonstrated under convective flow mode. Over 90% of the initial feed could be degraded with the multienzyme immobilized membranes …