Techno-Economic Optimization Of A Hybrid Energy System With Limited Grid Connection In Pursuit Of Net Zero Carbon Emissions For New Zealand,
2024
Brigham Young University - Provo
Techno-Economic Optimization Of A Hybrid Energy System With Limited Grid Connection In Pursuit Of Net Zero Carbon Emissions For New Zealand, Daniel Hill, Shafiqur Rahman Tito, Michael Walmsley, John Hedengren
Faculty Publications
As New Zealand moves towards net zero carbon emissions by 2050, multiple factors must be considered including increased electrical load due to electrification, variability of renewable energy generators, required storage capacity, system economics and limitations on grid transmission capacity. Complex and region-specific interactions between the various design choices involved are likely to require an understanding of a range of optimal and near-optimal designs for proposed micro-grid systems as opposed to a single optimal point. This work develops a novel multiscale optimization algorithm for optimization from a univariate capacity optimization approach to a multivariate one. This enhanced algorithm is applied to …
Multiscale Modeling Of Oxygen Evolution Through Generated Bilayer Porous Transport Layers For Pemwe Performance Improvement,
2024
University of South Carolina
Multiscale Modeling Of Oxygen Evolution Through Generated Bilayer Porous Transport Layers For Pemwe Performance Improvement, M. Sepe, G.-H. Jung, G.S- Doo, C.-S. Lee, H.-S. Cho, N. Tippayawong, Sirivatch Shimpalee
Faculty Publications
Optimization of proton exchange membrane water electrolyzers (PEMWE) has become a focus of researchers looking for a reliable way to generate power. A vital component to PEMWE operation is the porous transport layer (PTL) on the anode side, which is where oxygen is produced. The PTL must allow water access to the catalyst layer and remove oxygen simultaneously. In this work, a previously developed imaging technique is used to generate bilayer PTL structures. A multiscale modeling approach was used to study the effect of a bilayer PTL on oxygen evolution and PEMWE performance. First, a micro scale model was used …
Valorization Of Date Palm Waste For The Isolation, Characterization, And Surface Chemistry Modification Of Nanocellulose,
2024
United Arab Emirates University
Valorization Of Date Palm Waste For The Isolation, Characterization, And Surface Chemistry Modification Of Nanocellulose, Mohsin Raza
Thesis/ Dissertation Defenses
There are an estimated 42 million date palms in the United Arab Emirates and thousands of tons of date palm waste are produced annually. Date palm waste is a lignocellulosic material and can be used to extract cellulose, which is the most abundant and renewable biopolymer on earth. This dissertation focused on the thorough characterization and kinetic analysis of various date palm wastes to evaluate the percentage of α−cellulose by weight, lignocellulosic nature, and thermal stability, followed by the extraction and characterization of cellulose and nanocellulose (NC). NC is an emerging candidate to produce biodegradable and low-cost composites, bioplastics, insulation …
Enabling High-Rate Thermoplastic Composite Manufacturing Through Structure-Processing-Property Relationships Of Polyphenylene Sulfide,
2024
The University of Southern Mississippi
Enabling High-Rate Thermoplastic Composite Manufacturing Through Structure-Processing-Property Relationships Of Polyphenylene Sulfide, Lina Ghanbari
Dissertations
In this dissertation, relationships between polyphenylene sulfide (PPS) chain structure and melt processing parameters are linked to thermoplastic composite (TPC) properties and mechanical performance. Deviations from linear PPS structure and the formation of branching/crosslinked moieties upon exposure to TPC manufacturing steps presents an opportunity to systematically uncover the interdependencies of melt-state thermal history on polymer rheology, crystallization, crystal structure, and translate these properties to the continuum level. This work first explores unreinforced PPS and how the formation of non-linear chain architectures yield altered rheological states when held at melt processing temperatures. These hindered chains exhibit unconventional crystallization behavior and non-uniform …
An Assessment Of Methane Cracking Technologies For Hydrogen Production And Reduction Of Greenhouse Gases,
2024
University of Texas at Arlington
An Assessment Of Methane Cracking Technologies For Hydrogen Production And Reduction Of Greenhouse Gases, Alisa E. Pjetrovic
2024 Spring Honors Capstone Projects - Archive
Methane reformation and methane pyrolysis involve separating, or cracking, the components of methane, leading to the production of hydrogen gas, and in the case of pyrolysis, solid carbon. Because methane is known as a leading cause of climate change, these technologies are gaining attention as the global community moves to address methane as a greenhouse gas. This study aims to assess, through a systematic literature review, the current state-of-the-art methane cracking technologies based on seven technology criteria: hydrogen production capability, environmental impact, value of carbon produced, reaction stability, operating temperature requirements, energy requirements, and Technology Readiness Level (TRL). This study …
L-Ergothioneine Slows The Progression Of Age-Related Hearing Loss In Cba/Caj Mice,
2024
Missouri University of Science and Technology
L-Ergothioneine Slows The Progression Of Age-Related Hearing Loss In Cba/Caj Mice, Mark A. Bauer, Parveen Bazard, Alejandro A. Acosta, Nidhi Bangalore, Lina Elessaway, Mark Thivierge, Moksheta Chellani, Xiaoxia Zhu, Bo Ding, Joseph P. Walton, Robert D. Frisina
Chemical and Biochemical Engineering Faculty Research & Creative Works
The naturally occurring amino acid, l-ergothioneine (EGT), has immense potential as a therapeutic, having shown promise in the treatment of other disease models, including neurological disorders. EGT is naturally uptake into cells via its specific receptor, OCTN1, to be utilized by cells as an antioxidant and anti-inflammatory. In our current study, EGT was administered over a period of 6 months to 25–26-month-old CBA/CaJ mice as a possible treatment for age-related hearing loss (ARHL), since presbycusis has been linked to higher levels of cochlear oxidative stress, apoptosis, and chronic inflammation. Results from the current study indicate that EGT can prevent aging …
Elucidating The Impact Of Casting Solvent On Vanadium Ion Transport In Solution-Cast Ionomer Biocomposites Containing Lignin,
2024
Clemson University
Elucidating The Impact Of Casting Solvent On Vanadium Ion Transport In Solution-Cast Ionomer Biocomposites Containing Lignin, Zhongyu Wang
All Theses
This paper attempts to investigate the influence of solvent choice to the Nafion-lignin proton exchange membranes that used in the vanadium redox flow batteries. The influence of two different solvents: DMF and DMSO were investigated in this paper. Results show that when using DMSO as solvent, Nafion-lignin membranes' vanadium ion cross over can be greatly reduced in comparing with membranes prepared from DMF. Also, membranes prepared from DMSO also show higher water uptake ability and lower ion exchange capacity than the membranes prepared from DMF. This paper has also investigated the influence of lignin type to the membranes. Results show …
Computational Predictions Of Heart Failure Drug Effects On Cardiac Fibrosis,
2024
University of Arkansas, Fayetteville
Computational Predictions Of Heart Failure Drug Effects On Cardiac Fibrosis, Aaron Gardner
Chemical Engineering Undergraduate Honors Theses
The extracellular matrix is a complex system surrounding cells that is crucial to all of the cardiovascular system’s functions. Fibrosis is an excessive accumulation (scarring) of the extracellular matrix. Fibrosis is typically a negative event, and the scarring must be reduced in the heart in order to maintain its functionality. Due to this, simulations are run using the software “Netflux” in order to determine the effects of different heart failure drugs on cardiac fibrosis. The drugs that were simulated were an ACE Inhibitor, BAR Beta Blocker, ARB Blocker, and Entresto. These drugs were simulated over 50 hours at three different …
Optimization Of Collagen And Cell Concentrations For Engineered Tissues,
2024
University of Arkansas, Fayetteville
Optimization Of Collagen And Cell Concentrations For Engineered Tissues, Avery Fiser
Chemical Engineering Undergraduate Honors Theses
Improvements regarding the drug discovery process are necessary due to less than 1% of drugs making it from the initial discovery phase to patient treatment in clinics. One method of enhancing this process involves improving the relevance and dependability of in vitro testbeds utilized during pre-clinical testing. Improvement along these factors can provide a more relevant view for eventual drug behavior in patients. This additional relevance can allow for a reduced timeline in drug development for improving patient care. A consistent and morphologically sound baseline engineered tissue is vital to the creation of successful experimental models. Parameters such as cell …
Characterization Of Tunable And Responsive Functionalized Cellulose Nanofiber (Cnf) Gels With Applications As A 3d Bioprinting Ink,
2024
University of Rhode Island
Characterization Of Tunable And Responsive Functionalized Cellulose Nanofiber (Cnf) Gels With Applications As A 3d Bioprinting Ink, Charles Joseph Jouaneh
Senior Honors Projects
No abstract provided.
Sulfonated Lignin-Based Ionomer Biocomposite Membranes For Redox Flow Batteries,
2024
Clemson University
Sulfonated Lignin-Based Ionomer Biocomposite Membranes For Redox Flow Batteries, Aiswarya Mechoor
All Theses
The current benchmark membrane for vanadium redox flow batteries (VRFBs), Nafion™, accounts for up to 40% of the cost of the battery and suffers from poor ion selectivity, leading to diminished battery performance. Consequently, alternative ionomer membranes, such as sulfonated poly(ether ether ketone) (SPEEK), have recently garnered attention due to their lower cost and similar performance properties to Nafion. However, like Nafion, SPEEK also suffers from poor ion selectivity. In this study, we attempt to address the issue of poor ion selectivity by developing SPEEK–lignin composite membranes containing fractionated and functionalized lignin. Specifically, two lignin fractions – a low molecular …
Cooperative And Bifunctional Adsorbent-Catalyst Materials For In-Situ Vocs Capture-Conversion,
2024
Missouri University of Science and Technology
Cooperative And Bifunctional Adsorbent-Catalyst Materials For In-Situ Vocs Capture-Conversion, Sukanta K. Mondal, Peter Aina, Ali A. Rownaghi, Fateme Rezaei
Chemical and Biochemical Engineering Faculty Research & Creative Works
Volatile Organic Compounds (VOCs) Are Gases that Are Emitted into the Air from Products or Processes and Are Major Components of Air Pollution that Significantly Deteriorate Air Quality and Seriously Affect Human Health. Different Types of Metals, Metal Oxides, Mixed-Metal Oxides, Polymers, Activated Carbons, Zeolites, Metal-Organic Frameworks (MOFs) and Mixed-Matrixed Materials Have Been Developed and Used as Adsorbent or Catalyst for Diversified VOCs Detection, Removal, and Destruction. in This Comprehensive Review, We First Discuss the General Classification of VOCs Removal Materials and Processes and Outline the Historical Development of Bifunctional and Cooperative Adsorbent-Catalyst Materials for the Removal of VOCs from …
Future Of Process Safety: Insights, Approaches, And Potential Developments,
2024
Missouri University of Science and Technology
Future Of Process Safety: Insights, Approaches, And Potential Developments, Hossein Abedsoltan, Amirhesam Abedsoltan, Zeinab Zoghi
Chemical and Biochemical Engineering Faculty Research & Creative Works
This review explores the evolving landscape of process safety, emphasizing the integration of digitalization and advanced technologies. It assesses the role of the industrial Internet of Things, artificial intelligence, and machine learning (ML) in enhancing safety protocols. The paper examines predictive analytics, sensor technology advancements, and digital twins' contributions to safety optimization. It also discusses the future perspectives of risk management approaches, including proactive safety management systems, quantitative risk assessment techniques, and human reliability analysis. This comprehensive analysis provides insights into future developments and challenges in process safety.
Integrating Galectin-3 Into A Computational Model Of Cardiac Fibrosis Progression,
2024
University of Arkansas, Fayetteville
Integrating Galectin-3 Into A Computational Model Of Cardiac Fibrosis Progression, Adam Pieratt
Chemical Engineering Undergraduate Honors Theses
Cardiac fibrosis, a large contributor to heart failure, is the excessive accumulation of extracellular matrix in response to stress or injury. There are no approved treatments for cardiac fibrosis, and targeting specific species involved creates complex problems for drug development, so a computational model of the cardiac fibroblast signaling network can be used to observe the interactions involved in the progression of cardiac fibrosis. In this paper, a new protein called galectin-3 is integrated into this existing model, and connections are established to expand the coverage of the network. The additions are described, simulated using Netflux biological system simulation software, …
Biomass Derived Lignin Polymer Modification For Sustainable Chemical Engineering Applications,
2024
University of Arkansas, Fayetteville
Biomass Derived Lignin Polymer Modification For Sustainable Chemical Engineering Applications, Samantha Glidewell, Keisha Walters
Chemical Engineering Undergraduate Honors Theses
Lignin is an abundant naturally occurring plant-based polymer that is branched, highly unsaturated, and rich in aliphatic and aromatic hydroxyl groups. Lignin is a significant byproduct of the wood pulp and paper industries; however, it has yet to be widely utilized in commercial applications due to its non-linear structure, broad range of molecular weights, hydrophobicity, high rigidity, and brittleness. Recent investigations into modifying lignin to broaden its potential uses have shown promising results. This thesis explores different modification techniques of the naturally occurring hardwood lignin polymer for specific applications in areas of water treatment and polyurethane (PU) production. The first …
Green Chemistry Design Of Epoxies From Biomass For Circular Economy,
2024
Clemson University
Green Chemistry Design Of Epoxies From Biomass For Circular Economy, Kavya Ganesan
All Dissertations
The commercial epoxies market in automobiles has been growing mainly in terms of usage as automotive coatings and lightweight composite structures manufacturing. Most of these commercial epoxies are bisphenol-based. Bisphenol-based epoxies are a class of high-performance polymer materials that, when cured, yield thermosets with high mechanical, thermal and chemical resistance properties. Roughly, North America produces around 123 billion pounds of these epoxies which are used in various industrial applications like coatings, composites, structural parts, automotive, electronics, construction etc. These epoxies are mainly manufactured from bisphenol-A (BPA) and epichlorohydrin (EPH). These raw materials are sourced from fossil fuel resources and are …
Coal Cleat Network Stimulation Through A Combination Of Acidizing And Liquid Nitrogen Fracturing,
2024
Edith Cowan University
Coal Cleat Network Stimulation Through A Combination Of Acidizing And Liquid Nitrogen Fracturing, Mohsen Farrokhrouz, Hamed Akhondzadeh, Yongfei Yang, Faisal U. R. Awan, Stefan Iglauer, Maxim Lebedev, Alireza Keshavarz
Research outputs 2022 to 2026
Gas extraction from Coal Bed Methane has proved challenging mainly due to the low permeability of coals. This study investigated a combination of 2 stimulation techniques, Liquid Nitrogen (LN2) fracturing and acidizing, to increase pore structure and cleat network connectivity in coals. Microcomputed Tomography ( -CT) scanning results suggested that a combination of those 2 applications, in either sequence of implementation, has substantial potential in recovering mineralized fractures and inducing new fractures; thus, leading to wide-open cleat networks. X-ray images show that if LN2 fracturing of coal is preceded by acidizing, the stimulation efficiency increases from more than double the …
Developing Anisotropic Soft Matter As Functional Materials To Interface With Biological Systems,
2024
University of Arkansas, Fayetteville
Developing Anisotropic Soft Matter As Functional Materials To Interface With Biological Systems, Homa Ghaiedi
Graduate Theses and Dissertations
Liquid crystals (LCs) constitute a subset of soft matter possessing hybrid characteristics from both liquid and crystalline phases. In this state, the center of masses remains uncorrelated similar to an isotropic phase, while the long axis of molecules aligns in parallel, resulting in molecules exhibiting orientational and positional order, either individually or concurrently. The directional alignment inherent in LCs arises from the asymmetrical shape and structure of the constituent molecules, causing a spontaneous self-assembly into ordered phases. This cooperative molecular behavior manifests distinctive optical features when subjected to cross polarizers. The remarkable sensitivity of LCs to external stimuli, including temperature, …
Enhanced Phosphogypsum Thermal Reduction By Carbon In Presence Of Sodium Chloride At High Temperature,
2024
Edith Cowan University
Enhanced Phosphogypsum Thermal Reduction By Carbon In Presence Of Sodium Chloride At High Temperature, Li Chao, An Xuebin, Jing Hu, Yixiao Wang, Shizhao Wang, Yunshan Wang, Gang Yang, Yong Sun
Research outputs 2022 to 2026
This paper reports an enhanced approach of thermal reduction of phosphogypsum (PG) in the presence of sodium chloride (NaCl) in its molten phase. The thermodynamic together with in-situ thermogravimetric-Fourier transform infrared spectroscopy (TG-FTIR) result indicates the yield of CaS (solid) at the investigated temperature range (800–850 °C). Addition of NaCl not only appreciably reduces the activation energy of this reaction (800–850 °C) on average from 315 to 175 (kJ·mol−1) materially, but also significantly improve the conversion from CaSO4 to CaS. Additionally, the NaCl based waste salt (NaCl-WS) containing organic compounds (0.21 wt%) was found to produce similar results when compared …
Smart Manufacturing Of Cement: From Lab-Scale Simulation And Testing To Industry-Scale Deployment.,
2024
University of Louisville
Smart Manufacturing Of Cement: From Lab-Scale Simulation And Testing To Industry-Scale Deployment., Juan David Tabares Tamayo
Electronic Theses and Dissertations
Cement kilns are controlled by experienced process operators who follow experience-based industry guidelines using data collected and fundamental knowledge. The manufacturing process, which is equipped with sensors and equipment, transfers data/information to the operators to aid standardized decision-making operations. In contrast, companies have used such data to develop and implement digital solutions for predictive control systems; in effect, FLSmidth and Rockwell Automation. However, despite the availability of automated control systems and investigation in automation for process monitoring and optimization, opportunities to radically optimize cement manufacturing are still abundant and in need of implementation. Therefore, this research developed simulation models and …
