Chemical Engineering Commons^™

En Route Towards Α-Benzotriazoyl Nitroso Derivatives, Jean-Christophe M. Monbaliu, Lucas K. Beagle, Judit K. Beagle, Matthias Zeller, Christian V. Stevens, Alan R. Katritzky

Chemistry Faculty Publications

A new class of geminally-substituted nitroso compounds, i.e., α-benzotriazoyl nitroso derivatives, is presented. These compounds display a rather different behavior than other related nitroso compounds bearing a geminal electron-withdrawing group. An unexpected and spontaneous oxidation to the nitro analog is observed in solution.

Inkjet Printability Of Electronic Materials Important To The Manufacture Of Fully Printed Otfts, Sooman Lim

Dissertations

In this study, the inkjet printability of materials important to fabricating OTFTs was researched. In order to understand the jetting evolution of inkjet printed inks, simulations were performed with a nano copper and nano particle silver ink. To predict the inkjettability of the nano copper ink, Z and Oh numbers at different temperatures were determined. The results from the simulation studies were compared to experimental results obtained using a Dimatix inkjet printer. For the semiconductor ink, the inkjet printability of two organic semiconductors, P2TDC17FT4 (poly[(3,7-diheptadecylthieno[3,2-b]thieno[2',3':4,5]thieno[2,3-d]thiophene-2,6-diyl)[2,2'-bithiophene]-5,5'-diyl] dissolved in 1,2-dichlorobenzene and P3HT (poly-3 hexylthiophene) were compared to determine the relationship between drop …

Experimental Composite Guidance Conduits For Peripheral Nerve Repair: An Evaluation Of Ion Release, X. F. Zhang, A. Coughlan, H. O'Shea, Mark R. Towler, S. Kehoe, D. Boyd

Chemical and Biochemical Engineering Faculty Research & Creative Works

Poly (lactide-co-glycolide) (PLGA) - Pluronic F127 - glass composites have demonstrated excellent potential, from the perspective of controlled mechanical properties and cytocompatibility, for peripheral nerve regeneration. In addition to controlling the mechanical properties and cytotoxicity for such composite devices, the glass component may mediate specific responses upon implantation via degradation in the physiological environment and release of constituent elements. However, research focused on quantifying the release levels of such therapeutic ions from these experimental medical devices has been limited. To redress the balance, this paper explores the ion release profiles for Si⁴⁺, Ca²⁺, Na⁺, …

Gallium Containing Glass Polyalkenoate Anti-Cancerous Bone Cements: Glass Characterization And Physical Properties, A. W. Wren, A. Coughlan, L. Placek, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A gallium (Ga) glass series (0.48SiO₂-0.40ZnO-0.12CaO, with 0.08 mol% substitution for ZnO) was developed to formulate a Ga-containing Glass Polyalkenoate Cement (GPC) series. Network connectivity (NC) and X-ray Photoelectron Spectroscopy (XPS) was employed to investigate the role of Ga³⁺ in the glass, where it is assumed to act as a network modifier. Ga-GPC series was formulated with E9 and E11 polyacrylic acid (PAA) at 50, 55 and 60 wt% additions. E11 working times (T_w) ranged from 68 to 96 s (Lcon.) and 106 s for the Ga-GPCs (LGa-1 and LGa-2). Setting times (T_s) …

Fabrication Of Printed Substrate For Surface Enhanced Raman Spectroscopy, Ali Eshkeiti

Masters Theses

A novel surface enhanced Raman spectroscopy (SERS) substrate was successfully fabricated on a silicon wafer using inkjet printing and on polyethylene terephthalate (PET) using gravure printing. Silver (Ag) nanoparticle (NP) based ink, was used for roughening of the surface of silicon and PET. A thickness of 400 nm was measured for the printed Ag NP printed film on silicon and the thickness of the single and double layered films on PET were measured as 340 nm and 680 nm, respectively by using vertical scanning interferometry. The Ag NP printed SERS substrate was tested for application with heavy metal compounds like …

The Influence Of Coating Structure On Sheet-Fed Offset Ink Setting Rates, Ting Chen

Masters Theses

Much attention has been paid to the study of quickset ink setting as a complex ink-coating interaction. Offset ink setting rates are typically measured as ink splitting forces versus time and the slope of the regression line obtained from a plot of these measured values is reported, but scant attention has been paid to the deviations from that straight line. An initial slow ink setting rate is desired to minimize back-trap mottle, carryover picking and piling and enhance ink gloss; then a faster ink setting rate during sheet delivery to the pile is desired to reduce the likelihood of ink …

Micro Hydroelectric Power Generation, Roberto Arraya Saenz

Chemical Engineering Undergraduate Honors Theses

MICRO-HYDRO ELECTRIC POWER GENERATION Roberto Arraya Department of Chemical Engineering – Honors Thesis ABSTRACT A major industrial water user in New Mexico discharges approximately 3.8 million gal of wastewater per day. The topology of the site provides an elevation difference of about 150 ft between the plant site and the entrance to the municipal sewage line; this flow and elevation difference is sufficient to produce about 40 kW of electrical power using a water turbine/electrical generator set to extract power from the flowing stream. This report includes designs and economic analyses for two distinct cases. One case is based on …

Design Of Advanced Fouling-Resistant And Self-Cleaning Membranes For Treatment Of Oily And Impaired Waters, Daniel Wandera

All Dissertations

The overall goal of my Doctor of Philosophy (PhD) research was to design and develop advanced anti-fouling and self-cleaning membranes for treating impaired waters. Initial work focused on the development of membranes to treat produced water, which is oily wastewater that is co-produced during oil and gas exploration. Economical, environmentally sustainable treatment of the large volumes of produced water is a grand challenge for oil and gas companies. While membranes offer many advantages over more conventional treatment methods, membrane-based treatment processes for oily waters often fail due to membrane fouling. Therefore, the primary objective of my doctoral research was to …

Adsorption Kinetics Of Pb(Ii) And Zn(Ii) Ions Unto Carbonized Groundnut Shells And Maize Cobs, Leke Luter, Aboi Julius, Henry T. Dekaa, B. A. Ikyenge, Ande Sesugh, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Maize cobs and groundnut shell adsorbents from agricultural by-products were carbonized and investigated for adsorption of two selected metals, Lead (Pb II) and Zinc (Zn II) from aqueous solutions of these metals. Kinetic studies of the adsorption processes were investigated employing Elovich and the intraparticle diffussion models. The results showed that, the adsorption capacities of these comparatively cheaper adsorbents and their efficiency for the removal of Pb(II) and Zn(II) ions from aqueous solution present them suitable for use in place of the costly commercial activated carbons.

Characterization And Quantification Of Monomers, Oligomers, And By-Products From Xylan During Biomass Pretreatment, Ching-Shuan Lau

Graduate Theses and Dissertations

Biomass pretreatment generates inhibitory products, which reduce the overall yield of xylose for ethanol production. Understanding of hemicellulose depolymerization into xylose is essential to identify the pretreatment conditions that maximize xylose formation, but minimize the generation of these inhibitory products, such as formic acid and furfural. Thus, the goal of this project is to understand how dilute acid pretreatment parameters affect hemicellulose depolymerization, maximize xylose concentrations, and minimize by-products formation.

To progress towards this goal, rates and mechanisms of hemicellulose release must be determined. Birchwood xylan was used as the starting material to produce xylose oligomers. The hydrolyzed birchwood xylan …

Peptoid Based Slide Coatings For Disease Detection Via Elisa Microarray Analysis, Melissa Lea Hebert

Graduate Theses and Dissertations

Poly-N-substituted glycines (peptoids) are a very versatile family of synthetic molecules that can be customized for any number of applications. In this study, we chose to use peptoids as a foundation for sandwich ELISA microarray analysis with a long term goal of creating an early detection device for complex diseases such as cancer. The peptoids were designed to self-assemble into microspheres to be used in coatings on the surface of the microarray substrates to increase the surface area available for antibody attachment. This increased antibody density would lead to an increase in the microarray analysis sensitivity and dynamic range. Studies …

Plasmonic Pervaporation Via Gold Nanoparticle-Functionalized Nanocomposite Membranes, Aaron Russell

Graduate Theses and Dissertations

Butanol derived from biological feedstocks has significant potential as a liquid fuel source, but the separation methods used in its production can be prohibitively expensive and are therefore currently the subject of extensive research. Pervaporation is a promising membrane process that is effective in butanol separations, but involves a large energy demand. This study examines the possibility of increasing flux and energy efficiency in pervaporation via plasmonic heating of gold nanoparticle-functionalized, polymer nanocomposite membranes (AuNCMs) in lieu of conventional feed heating. An economic analysis demonstrated that plasmonic pervaporation could achieve significant reductions in energy usage and utility cost in butanol …

Determining The Operation Limits Of Two Distillation Columns, Murat Ozkaya

Masters Theses and Doctoral Dissertations

The two distillation columns of Wacker Institute pilot plant at the Chattanooga State Community College are investigated for stable operating regions, flooding phenomena that occurs in the bubble-cap tray distillation column, weeping phenomena that occurs in the sieve tray distillation column, and comparison of operation between the two distillation columns. With the use of a distributed control system (DCS) and glass equipment in the pilot plant, these phenomena are analyzed visually and with the help of instrumentation readings. The energy usage and production limits of both distillation columns are discussed. The flooding of bubble-cap trays occur before reaching production goals …

Processes For The Production Of Buprenorphine With Reduced Impurity Formation, Brenda E. Allen, Esa T. Jarvi, Dennis J. Kaluta, James R. Meyer, Keith Tomazi, Anthony Mannino, Brian Orr

Chemical and Biochemical Engineering Faculty Research & Creative Works

The present invention provides process for the production of opiate alkaloids. In particular, the present invention provides processes for the production of buprenorphine or a derivative of buprenorphine that minimizes the formation of impurities.

Solid Oxide Fuel Cells With Both High Voltage And Power Output By Utilizing Beneficial Interfacial Reaction, Chao Su, Zongping Shao, Ye Lin, Yuzhou Wu, Huanting Wang

Faculty Publications

An intriguing cell concept by applying proton-conducting oxide as the ionic conducting phase in the anode and taking advantage of beneficial interfacial reaction between anode and electrolyte is proposed to successfully achieve both high open circuit voltage (OCV) and power output for SOFCs with thin-film samarium doped ceria (SDC) electrolyte at temperatures higher than 600 °C. The fuel cells were fabricated by conventional route without introducing an additional processing step. A very thin and dense interfacial layer (2–3 μm) with compositional gradient was created by in situ reaction between anode and electrolyte although the anode substrate had high surface roughness …

Homogeneous Viologens For Use As Catalysts In Direct Carbohydrate Fuel Cells, Dane C. Hansen

Theses and Dissertations

Deriving electrical energy from glucose and other carbohydrates under mild conditions is an important research objective because these biomolecules are abundant, renewable, and can provide 12 to 24 electrons per molecule, yielding substantial electrical power. It was previously observed that disubstituted viologens, salts of N,N'-disubstituted 4,4'-bipyridine, are able to oxidize glucose under alkaline conditions. Building on that initial result, the objective of this work was to understand and quantify the effectiveness and utility of viologens as catalysts for use in direct carbohydrate fuel cells.The extent that viologens oxidize carbohydrates, the conditions under which that oxidation occurs, and the mechanism for …

Order-Disorder Transition Of Aragonite Nanoparticles In Nacre, Zaiwang Huang, Xiaodong Li

Faculty Publications

Understanding nacre’s bottom-up biomineralization mechanism, particularly, how individual aragonite platelets are formed, has long remained elusive due to its crystallographic peculiarity and structural complexity. Here we report that crystallographic order-disorder transition can be triggered within individual aragonite platelets in pristine nacre by means of heat treatment and/or inelastic deformation, offering a unique opportunity to discriminate mysterious aragonite nanoparticles in transmission electron microscopy. Our findings unambiguously uncover why aragonite nanoparticles in pristine nacre have long been inaccessible under TEM observation, which is attributed to the monocrystal-polycrystal duality of the aragonite platelet. The underlying physical mechanism for why an individual aragonite platelet …

Transparent Conducting Films Of Cdse(Zns) Core(Shell) Quantum Dot Xerogels, Lasantha Korala, Li Li, Stephanie L. Brock

Chemistry Faculty Research Publications

A method of fabricating sol–gel quantum dot (QD) films is demonstrated, and their optical, structural and electrical properties are evaluated. The CdSe(ZnS) xerogel films remain quantum confined, yet are highly conductive (10⁻³ S cm⁻¹). This approach provides a pathway for the exploitation of QD gels in optoelectronic applications.

Constrained Control And Optimization Of Tubular Solid Oxide Fuel Cells For Extending Cell Lifetime, Ben Spivey, John Hedengren, Thomas F. Edgar

Faculty Publications

Extending fuel cell lifetime is a necessary objective for reducing fuel cell power generation cost of electricity. Capital costs comprise the most significant fraction of the cost of electricity. Reducing the frequency of fuel cell replacement can be achieved by implementing a control strategy that prevents excursions into operating regions causing failure. In this paper we implement a constrained MIMO model predictive controller (MPC) to avoid the failure modes relevant for a high-temperature tubular solid oxide fuel cell (SOFC) system while performing load-following. The primary causes of failure are catalyst poisoning, fuel or air starvation, carbon deposition, and microcracking. Prior …

An Oxidase-Based Electrochemical Fluidic Sensor With High-Sensitivity And Low-Interference By On-Chip Oxygen Manipulation, Nitin Radhakrishnan, Jongwon Park, Chang Soo Kim

Electrical and Computer Engineering Faculty Research & Creative Works

Utilizing a simple fluidic structure, we demonstrate the improved performance of oxidase-Based enzymatic biosensors. Electrolysis of water is utilized to generate bubbles to manipulate the oxygen microenvironment close to the biosensor in a fluidic channel. for the proper enzyme reactions to occur, a simple mechanical procedure of manipulating bubbles was developed to maximize the oxygen level while minimizing the pH change after electrolysis. the sensors show improved sensitivities based on the oxygen dependency of enzyme reaction. in addition, this oxygen-rich operation minimizes the ratio of electrochemical interference signal by ascorbic acid during sensor operation (i.e., amperometric detection of hydrogen peroxide). …