Chemical Engineering Commons^™

Polymer Sensors For The Quantification Of Waterborne Uranium, C E. Duval, A F. Seliman, T A. Devol, S M. Husson

Chemical and Biomolecular Graduate Research Symposium

No abstract provided.

Development Of Anti-Fouling, Anti-Microbial Membranes By Chemical Patterning, Steven Weinman, Na Li, Viatcheslav Freger, Moshe Herzberg, Scott Husson

Chemical and Biomolecular Graduate Research Symposium

Over 1 billion people lack access to clean drinking water. Membranes are a tool that can help provide clean water to these people. However, treatment of impaired waters for beneficial use exposes the membranes to feed waters containing biological and abiotic species, which leads to fouling and loss of membrane productivity over time. Since reduction in flux due to fouling is one of the largest costs associated with membrane processes in water treatment, new coatings that limit fouling would have significant economic and societal impacts. Developing these advanced coatings is the focus of our work.

Carbon Fibers Derived From Bi-Component Precursors, Jing Jin, Amod A. Ogale

Chemical and Biomolecular Graduate Research Symposium

No abstract provided.

Conducting Polymer Microstructures And Composites For Supercapacitors, Kryssia P. Diaz-Orellana, Mark E. Roberts

Chemical and Biomolecular Graduate Research Symposium

To increase the performance of conducting polymer electrodes for supercapacitors by controlling polymer assembly, ion transport, electron transfer, and redox processes. The electrode morphology and electrochemical performance are studied.

Dendrimer-Guest Interactions: Challenging Conventional Wisdom, Ryan S. Defever, Sapna Sarupria

Chemical and Biomolecular Graduate Research Symposium

Solutions to many future challenges - including water purification, drug delivery, and energy storage - will require innovative new materials. Dendrimers are a class of materials with wide-ranging applications whose behavior is not fully understood. In many potential applications, dendrimers interact with small molecules. Our work focuses on describing the fundamental mechanisms governing the interactions between dendrimers and hydrocarbons using molecular modeling and computer simulations. A common view of dendrimer host-guest interactions is that the guest molecules are encapsulated in protected interior voids within the dendrimer structure. Our results present an alternative picture and show that the association of a …

Effect Of Process Variables On Mechanical And Transport Properties Of Carbon Fibers From Mesophase Pitch, Victor Bermudez, Amod Ogale

Chemical and Biomolecular Graduate Research Symposium

To obtain mesophase pitch-based carbon fibers with improved mechanical strength while retaining superior electrical and thermal properties by

i) Systematic investigation of the relationship between DDR versus longitudinal and transverse microstructure of mesophase MP fibers; and

ii) Developing a novel type of microstructure

Heterogeneous Catalysis Of Aqueous Phase Reforming Of Glycerol With First Principle Calculations And Molecular Dynamics Simulations, Tianjun Xie, Rachel B. Getman

Chemical and Biomolecular Graduate Research Symposium

No abstract provided.

Dosi In Novel Geometry Dishes, Jonathan Lawrence Lambert Jones

Electronic Theses and Dissertations

Effects of hemodynamic forces on cellular response are well studied. Wall shear stress is regularly accepted as the primary hemodynamic force affecting cellular response. Hemodynamic forces studies utilize Petri dishes on orbital shakers to grow cells for the experiments since this is an easily scalable system. However, characterizing the hemodynamics is difficult since the oscillatory swirling motion creates multidirectional and variable magnitude shear throughout the dish. Thus, a novel geometry dish that could create uniaxial shear with less variation in magnitude would be advantageous for studying shear stress effects on cellular response. The purpose of this thesis was to explore …

Functional Clay Nanotubes And Composites, Yafei Zhao

Doctoral Dissertations

Tubular nanomaterials and their composites have been extensively studied in recent years in the fields of physics, chemistry, biology, and biomedicine. Carbon nanotube is the most commonly studied tubular nanomaterial; however, toxicity and high cost make it less attractive in industry and thus restricts its applications. Halloysite nanotubes, which are available in abundance in the United States as well as in other countries around the world, is a low-cost, unique and versatile aluminosilicate mineral with a chemical formula of Al4Si4O10(OH)8·nH2O. Basically, the halloysite tube diameter is around 50 nm and the length varies with different locations ranging from 0.4-1.5 μm. …

Investigating A Pilot Area In The Williston Basin Three Forks Formation To Determine The Optimal Inter-Well Spacing And Hydraulic Fracture Length To Maximize Economic Recovery, Adhikeshavan Ravee

Graduate Theses & Non-Theses

The objective of this work is to determine optimal inter-well spacing and hydraulic fracture length of the Three Forks assets in the Williston Basin operated by SM Energy. SM Energy is an independent exploration and production company with operations across North America, mainly in Texas and North Dakota. SM Energy recently switched to infill drilling development in their North Dakota assets and is interested in knowing the economically optimal number of wells that can be drilled per two-section drilling unit.

A simulation approach was taken in this research to address SM Energy’s issue. For research purposes a small pilot area …

Phonon-Drag Contribution To Seebeck Coefficient Of Ge-On-Insulator Substrate Fabricated By Wafer Bonding Process, Veerappan Manimuthu, Shoma Yoshida, Yuhei Suzuki, Faiz Salleh, Mukannan Arivanandhan, Yoshinari Kamakura, Yasuhiro Hayakawa, Hiroya Ikeda

Makara Journal of Technology

In order to build high-sensitivity infrared photodetectors using SiGe nanowires, we investigate the thermoelectric characteristics of Ge-on-insulator (GOI) layers as a reference for SiGe. We fabricate p-type GOI substrates with an impurity concentration of 1016-1018cm-3 by a wafer-bonding process using Ge and oxidized Si wafers. Annealing treatment is performed in order to further increase the bonding strength of Ge/SiO2 interface. We measure the Seebeck coefficient in the temperature range of 290-350 K. The Seebeck coefficient of the GOI layers is very close to the theoretical value for Ge, calculated on the basis of carrier transport. Hence, there is a small …

Using Mixtures Of Fatty Acid Methyl Esters As Phase Change Materials For Concrete, Leah Christine Liston

Open Access Theses

Phase change materials (PCMs) are an effective way of storing/releasing thermal energy via phase transformations. Incorporating PCMs into concrete pavements at airports has been suggested as a means to reduce the accumulation of snow and ice on runways. This thesis reports on the development of two phase change materials composed of binary mixtures of fatty acid methyl esters (FAME) which provide a solid-liquid transition slightly above 0°C with a high enthalpy of fusion. Current findings of this study indicate that these mixtures have the necessary properties to be a high performance PCM with the potential to reduce the levels of …

Optimal Start-Up Control Of An Evaporation System Modeled As An Interconnected Hybrid Dynamical System, Rithesh Iyer

Open Access Theses

The purpose of this research is to investigate the feasibility and advantageous outcomes of modeling a complicated non-linear hybrid dynamical process as an interconnected dynamical system for the purpose of solving a hybrid optimal control problem under the framework of nonlinear model predictive control. This work considers a hybrid model of the startup process of an evaporation system. In this evaporation system a liquid containing mixture of a non-volatile component A and volatile solvents B (water) and C (alcohol) is heated to evaporate the solvents and obtain component A at a higher concentration using a column that is temperature controlled …

Effect Of Maleic Acid On The Selectivity Of Glucose And Fructose Dehydration And Degradation, Ximing Zhang

Open Access Dissertations

5-Hydroxymethyfurfural (HMF), a platform chemical can upgrade to a variety of fuels and polymers, can be manufactured from lignocellulose. This study focuses on the Lewis and Brønsted acid effect on hexose dehydration for HMF production. We report the positive effect of maleic acid, a dicarboxylic acid used as Brønsted acid, on the selectivity of hexose dehydration to 5-hydroxymethyfurfural (HMF), and subsequent hydrolysis to levulinic and formic acids. We also describe the kinetic analysis of a Lewis acid (AlCl ₃) alone and in combination with HCl or maleic acid to catalyze the isomerization of glucose to fructose, dehydration of fructose …

Experimental And Modeling Investigation Of Cellulose Nanocrystals Polymer Composite Fibers, Si Chen

Open Access Dissertations

Cellulose nanocrystals (CNCs) are a class of newly developed and sustainable nanomaterial derived from cellulose-based materials such as wood. There have been substantial research efforts to utilize these materials as reinforcing agents. However, in order to develop CNC nanocomposites with industrial applications, it is necessary to understand how addition of CNCs affect the properties of the polymer nanocomposite. In the present work, several approaches, experimental and theoretical, are presented in an effort to characterize and understand the effect of CNCs on the properties of polymer CNC fibers. ^ Two experimental methods were used to develop cellulose acetate (CA) and CNC …

Optimization Of Graphene-Based Materials Outperforming Host Epoxy Matrices, Liberata Guadagno, Marialuigia Raimondo, Luigi Vertuccio, Marco Mauro, Gaetano Guerra, Khalid Lafdi, Biagio De Vivo, Patrizia Lamberti, Giovanni Spinelli, Vincenzo Tucci

Chemical and Materials Engineering Faculty Publications

The degree of graphite exfoliation and edge-carboxylated layers can be controlled and balanced to design lightweight materials characterized by both low electrical percolation thresholds (EPT) and improved mechanical properties. So far, this challenging task has been undoubtedly very hard to achieve.

The results presented in this paper highlight the effect of exfoliation degree and the role of edge-carboxylated graphite layers to give self-assembled structures embedded in the polymeric matrix. Graphene layers inside the matrix may serve as building blocks of complex systems that could outperform the host matrix. Improvements in electrical percolation and mechanical performance have been obtained by a …

General Method To Predict Voltage-Dependent Ionic Conduction In A Solid Electrolyte Coating On Electrodes, Jie Pan, Yang-Tse Cheng, Yue Qi

Chemical and Materials Engineering Faculty Publications

Understanding the ionic conduction in solid electrolytes in contact with electrodes is vitally important to many applications, such as lithium ion batteries. The problem is complex because both the internal properties of the materials (e.g., electronic structure) and the characteristics of the externally contacting phases (e.g., voltage of the electrode) affect defect formation and transport. In this paper, we developed a method based on density functional theory to study the physics of defects in a solid electrolyte in equilibrium with an external environment. This method was then applied to predict the ionic conduction in lithium fluoride (LiF), in contact with …

Group Decisions In Value Management, Christiono Utomo, Farida Murti, Arazi Idrus

Makara Journal of Technology

This research deals with a technique to expedite group decision making during the selection of technical solutions for value management process. Selection of a solution from a set of alternatives is facilitated by evaluating using multicriteria decision making techniques. During the process, every possible solution is rated on criteria of function and cost. Function deals more with quality than with quantity, and cost can be calculated based on the theoretical time value of money. Decision-making techniques based on satisfying games are applied to determine the relative function and cost of solutions and hence their relative value. The functions were determined …

Development Of A Rapid Compression Controlled-Expansion Machine For Chemical Ignition Studies, John Neuman

Master's Theses (2009 -)

The ability to accurately model fuel combustion processes is essential to the development of transportation, power generation, and manufacturing technology. Models describing the kinetics of chemical oxidation are readily available and highly refined for a wide range of test fuels. However, these models still suffer from high levels of uncertainty under engine-relevant conditions, largely due to a lack of consistency between published validation data. An experimental testing apparatus, known as the Rapid Compression Controlled-Expansion Machine (RCCEM) has been designed and fabricated to conduct chemical kinetic studies. The RCCEM features a pneumatically-driven, custom-designed cam, which governs the volumetric compression and expansion …

Fiber Optic Ring Resonator Sensor Detection Technique Based On Spectral Intensity Integration, Purnomo Sidi Priambodo, Sasono Rahardjo, Gunawan Witjaksono, Djoko Hartanto

Makara Journal of Technology

Resonant field phenomenon in optical ring resonator has been a major theme for various studies and can be used for various sensor applications. The spectral response shape changes are subjects to be discussed and analyzed for detection in optical sensor system. The spectral response changes are caused by various factors ranging from refractive index of the surrounding medium, medium loss due to absorption and scattering, and coupling variation between waveguides. These optical phenomena are mostly used for bio-sensor applications, since it is free from electromagnetic interference (EMI) and non-physically destructive. In this paper, we discuss our current research in developing …