Chemical Engineering Commons^™

Synthesis And Electrochemical Properties Of Cnts/V2O5 Hollow Microspheres, Liang Hao, Lai-Fa Shen, Jie Wang, Jia-Jia Zhu, Xiao-Chen Zhao, Xiao-Gang Zhang

Journal of Electrochemistry

The carbon nanotubes/vanadium oxides (CNTs/V₂O₅) hollow microspheres (VOC) were prepared via solvothermal process. The effects of the ratio for CNTs to V₂O₅ on the morphologies, structures and electrochemical performances were systemically investigated. The results indicate that CNTs dramatically enhanced the rate performances of VOC composite electrodes. When the ratio of CNTs is 7.1%, the VOC composite electrode exhibited the best electrochemical performance, which delivered a specific capacitance of 346 F·g^-1 at 0.5 A·g^-1 and maintained 75% at 8 A·g^-1 in 5 mol L^-1 LiNO₃. A hybrid capacitor …

Porous Co3O4 Hollow Nanospheres Cathode Catalyst For High-Capacity And Long-Cycle Li-Air Batteries, Tong Liu, Na Li, Qing-Chao Liu, Xin-Bo Zhang

Journal of Electrochemistry

In this paper, a high specific surface area of porous Co3O4 hollow nanospheres was successfully synthesized via hydrothermal carbonization at 140 °C, followed by calcination using cobalt nitrate hexahydrate (Co(NO3)2·6H2O), hexamethylenetetramine (HMT), sucrose, and sodium citrate (Na3C6H5O7). The porous Co3O4 hollow nanospheres consisted of nanoparticles with high specific surface area of mesoporous structure, and could provide active reaction sites for OER and ORR. When used as lithium-air battery cathode catalyst, the Co3O4/Super P (SP) electrode exhibited excellent cycle performance, resulting in high capacity and long life of lithium-air batteries.

Syntheses And Electrochemical Performances Of Li4Ti5O12 Anode Materials For Lithium Ion Battery, Yong-Long Zhang, Xue-Bu Hu, Yao-Qiong Wang, Dong-Hai Huang

Journal of Electrochemistry

Series of spinel lithium titanate (Li₄Ti₅O₁₂) materials were synthesized by one-step solid-state reaction using lithium acetate and TiO₂ as raw materials under different temperatures (750/800/850 °C) and atmospheres (N₂/air). The as-prepared Li₄Ti₅O₁₂ materials were investigated by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, cyclic voltammotry and charge-discharge test to analyze their crystal structures, microstructures and electrochemical performances. The results show that the Li₄Ti₅O₁₂（L-800N）material obtained at 800 °C under nitrogen atmosphere exhibited better electrochemical performance and smaller particle size. The initial …

Simulation Of Deformation Of Red Blood Cells, Tai-Hsien Wu

Research and Creative Activities Poster Day

Using simulation to discuss the deformation of cells is not only efficient, but also inexpensive. In this study, a red blood cell (RBC) model is introduced which is simple but rigorous. This RBC model has been stretched to examine its properties and its results agree well with an experiment which was conducted in 2003. Therefore, the model allows researchers to conduct studies related to deformation of RBCs or investigate properties of RBCs. Based on this RBC model, we can couple it with the computational fluid dynamics to investigate the interaction between cells and flows, as well as mimic other cells …

Life-Cycle Energy And Ghg Emissions Of Forest Biomass Harvest And Transport For Biofuel Production In Michigan, Fengli Zhang, Dana M. Johnson, Jinjiang Wang

College of Business Publications

High dependence on imported oil has increased U.S. strategic vulnerability and prompted more research in the area of renewable energy production. Ethanol production from renewable woody biomass, which could be a substitute for gasoline, has seen increased interest. This study analysed energy use and greenhouse gas emission impacts on the forest biomass supply chain activities within the State of Michigan. A life-cycle assessment of harvesting and transportation stages was completed utilizing peer-reviewed literature. Results for forest-delivered ethanol were compared with those for petroleum gasoline using data specific to the U.S. The analysis from a woody biomass feedstock supply perspective uncovered …

Substantiate Percent Yield Within Aerosol Personal Care Plant, Gregory Maxwell

Honors Theses

The project identified losses of bulk product throughout the mix and packaging process substantiating percent yield. Support data for yield calculations was found by mapping multiple equipment trains, collecting and weighing samples, tracking waste streams, and executing engineering studies. The completed studies identified and verified product loss ensuring the accuracy of yield calculations. This project identified potential cost savings to the facilities.

The Effects Of Colorimetry And Spectroscopy Using The Iso M0, M1 And M2 Modes, Kaylee Flannery

Honors Theses

The use of Optical Brightening Agents (OBA’s) in printing and proofing papers has drastically increased and, while the use of OBA’s has improved the appearance for end-use consumers, it represents great challenges to those attempting to successfully color manage the print. Therefore, standards have been created in order to assist in the measurement of these papers, and can be found within ISO 13655-2009: Spectral Measurement and Colorimetric Computation for Graphic Arts Images. This newly defined measurement standard is referred to as the “M” series. While this new standard has its advantages, it also poses some disadvantages. This report will …

Flavour Chemicals In Electronic Cigarette Fluids, Peyton A. Tierney, Clarissa D. Karpinski, Jessica E. Brown, Wentai Luo, James F. Pankow

Chemistry Faculty Publications and Presentations

Background: Most e-cigarette liquids contain flavour chemicals. Flavour chemicals certified as safe for ingestion by the Flavor Extracts Manufacturers Association may not be safe for use in e-cigarettes. This study identified and measured flavour chemicals in 30 e-cigarette fluids.

Methods: Two brands of single-use e-cigarettes were selected and their fluids in multiple flavour types analysed by gas chromatography/mass spectrometry. For the same flavour types, and for selected confectionary flavours (eg, bubble gum and cotton candy), also analysed were convenience samples of e-cigarette fluids in refill bottles from local ‘vape’ shops and online retailers.

Results: In many liquids, total flavour chemicals …

Enhancing Grain Boundary Ionic Conductivity In Mixed Ionic–Electronic Conductors, Ye Lin, Shumin Fang, Dong Su, Kyle S. Brinkman, Fanglin Chen

Faculty Publications

Mixed ionic–electronic conductors are widely used in devices for energy conversion and storage. Grain boundaries in these materials have nanoscale spatial dimensions, which can generate substantial resistance to ionic transport due to dopant segregation. Here, we report the concept of targeted phase formation in a Ce0.8Gd0.2O2−δ–CoFe2O4 composite that serves to enhance the grain boundary ionic conductivity. Using transmission electron microscopy and spectroscopy approaches, we probe the grain boundary charge distribution and chemical environments altered by the phase reaction between the two constituents. The formation of an emergent phase successfully avoids segregation of the Gd dopant and depletion of oxygen vacancies …

Surface Modifications Of Polymers Via Acidic Solutions, Brittany Stanley, Kenya Wallace

Research Horizons Day Posters

No abstract provided.

A Metal-Free Approach To Biaryl Compounds: Carbon-Carbon Bond Formation From Diaryliodonium Salts And Aryl Triolborates, Kuruppu Lilanthi Jayatissa

Dissertations and Theses

Biaryl moieties are important structural motifs in many industries, including pharmaceutical, agrochemical, energy and technology. The development of novel and efficient methods to synthesize these carbon-carbon bonds is at the forefront of synthetic methodology. Since Ullmann’s first report of stoichiometric Cu-mediated homo-coupling of aryl halides, there has been a dramatic evolution in transition metal catalyzed biaryl cross-coupling reactions.

Our work focuses on the discovery and development of an unprecedented reagent combination for metal-free cross-coupling. It is hypothesized that direct carbon-carbon bond formation occurs via a triaryl-λ³-iodane and that electrophile/nucleophile pairing is critical for success in the reaction. Proof-of-concept …

Parameter Estimation For Towed Cable Systems Using Moving Horizon Estimation, Liang Sun, Jeremy Castagno, John Hedengren, Randall Beard

Faculty Publications

This paper presents a strategy for optimal estimation of parameters for towed cable systems using moving horizon estimation (MHE). The main contributions of the work include a novel formulation of MHE using a dead-band that explicitly rejects measurement noise, real-time implementation results, and the investigation of time-varying stochastic disturbances as well as unknown yet constant disturbances. Further analysis is conducted on the observability and sensitivity of key parameters to determine which parameters can be estimated by the proposed approach using real-time streaming data from experiments. In addition to the real-time results, an offline multiobjective optimization is conducted to reveal the …

Mechanism And Kinetics Of Homogeneous Catalysis, Silei Xiong

Open Access Dissertations

A model-based approach using a diverse set of data including monomer consumption, evolution of molecular weight, and end-group analysis was employed to determine each of the reaction specific rate constants involved in 1-hexene polymerization process catalyzed by a family of group IV single-site catalysts. The primary set of elementary reaction steps included initiation, normal propagation, misinsertion, recovery from misinsertion, monomer independent and dependent chain transfer. Robust determination of kinetic constants and reaction mechanisms for a series of Group IV amine bis-phenolate complexes led to the development of several structure−activity relationships.^ For some of the catalysts of the bis-phenolate family the …

Optimal Design Of Hybrid Renewable Energy Systems, Alphonse Hakizimana, Joseph Scott

Chemical and Biomolecular Graduate Research Symposium

Utilization of renewable energy sources such as wind and solar can overcome environmental threats associated with fossil fuels. But expensive power producing and storage components are required to harness and store renewable energy. In addition renewable sources are intermittent, thus unreliable when used independently.

Alternative Sample Loading Preparation For Thermal Ionization Mass Spectrometry, Scott M. Husson, Brian Powell, Glenn Fugate, David Locklair, Joseph Mannion

Chemical and Biomolecular Graduate Research Symposium

This contribution describes a new sample loading method for Thermal Ionization Mass Spectrometry (TIMS), which is used in nuclear safeguards and non-proliferation efforts worldwide and is known as the “gold standard” in isotopic ratio measurements of plutonium. TIMS analysis is used to determine grades of nuclear material and the extent of enrichment at production sites. The current sample loading method for TIMS analysis is known as “bead-loading”. While it provides the lowest detection limit of any known method for plutonium analysis, bead-loading is a difficult, time consuming, and expensive method that results in up to 20% sample loss. The major …

Micro‐Textured Boron Nitride Nanoplatelet Modified Polyethylene Films, Ozgun Ozdemir, Amod A. Ogale

Chemical and Biomolecular Graduate Research Symposium

Linear low density polyethylene (LLDPE) micro‐textured films filled with boron nitride nanoplatelets (BNN) were produced by continuous melt extrusion. Nanoparticles displayed a significant extent of dispersion inside the matrix. The addition of BNN led to more than 10‐fold increase of the in‐plane thermal conductivity (TC) of the nanocomposite (7.7 W/m.K vs 0.3 W/m.K for pure LLDPE), and 1.3‐fold increase of through thickness TC. To increase the surface area available for convective heat transfer, micro‐textured films (T‐BNN) were produced from a micro‐patterned die. Nanoplatelets were aligned parallel to the film machine direction. Film stiffness and tensile strength are comparable to the …

Cellulose Nanofiber Composite Membranes For Water Purification, Nithinart Chitpong, Scott M. Husson

Chemical and Biomolecular Graduate Research Symposium

Global water demand continues to increase because of population growth, urbanization, and climate change. Since there are limited natural water resources, water purification systems play a critical societal role. Membrane technologies are used widely to improve water quality for beneficial use. Therefore, the development of new membranes is an active area of research in the water purification field.

Effect Of Co Adsorption And Coverage On Ethanol Production From Syngas, Anuradha Gundamaraju, Ming He, David A. Bruce

Chemical and Biomolecular Graduate Research Symposium

Concern over ever decreasing oil supplies, increasing levels of pollution and energy independence have been the primary driving forces behind significant efforts focused on the development of new technologies capable of increasing the production of alternative fuels. To-date, ethanol and to a lesser extent biodiesel have been the only alternative fuels or fuel additives to gain widespread use and be synthesized on a commercial scale. Currently, most of the World’s ethanol is produced from renewable biomass. The biomass feedstocks and fermentation broths used in ethanol production contain high amounts of water, and therefore, the energy efficiency of the process is …

Density Functional Theory Simulations Of Mofs Encapsulated-Catalyzed Systems, Jiazhou Zhu, Rachel B. Getman

Chemical and Biomolecular Graduate Research Symposium

The research is mainly on Computational Design of Highly Selective Transition Metal Catalysts Encapsulated by Metal-­‐Organic Frameworks for Butane Oxidation to 1-­‐Butanol. Metal Organic Framework (MOF) grown over a heterogeneous catalyst. Pores of framework allow only certain molecules of correct size, orientation, or chemical properties to access catalyst. The framework will force molecule into desired orientation where only the terminal atoms will “see” the catalyst. In our simulation we would like to use the helium ring to simulate the MOFs pores, since He is inert and exhibits the no chemical reactivity. The reaction we are looking into is butane oxidation …

Modification Of Liposome Release Characteristics With Metal Nanoparticles, Saptarshi Chakraborty, Christopher L. Kitchens

Chemical and Biomolecular Graduate Research Symposium

Gold nanoparticles have been getting increasing amount of attention due to their stability, optical properties and low toxicity in the field of consumer products and biomedicines. Gold nanoparticles with various surface chemistries have been synthesized in order to take advantage of the size, shape and morphology dependent properties of the nanoparticles which vary greatly from the bulk properties. These properties of gold nanoparticles have made them attractive in optical sensing, targeted drug delivery, bio imaging, chemical, catalytic and photo thermal applications. These surface functionalized nanoparticles were used to study nanoparticle-lipid bilayer interactions using lipid bilayer permeability studies, where permeability of …