Chemical Engineering Commons^™

Development Of A Novel Enzymatic Pre-Treatment For Lignocellulosic Biomass, Melissa Robins, Jenna Rickus

The Summer Undergraduate Research Fellowship (SURF) Symposium

Biofuels, fuels derived directly from living matter, present a renewable and environmentally friendly alternative to petroleum based fuels. Bioethanol produced from low input energy crops or agricultural waste is a promising fuel source because it does not interfere with the human food supply chain and the ethanol produced can be blended with gasoline. These potential sources of bioethanol are not yet commercially viable due to a polymer called lignin present in the plant’s cell wall which impedes the conversion of cellulose to glucose and the eventual fermentation of glucose to ethanol. Developing new methods for the pretreatment of lignocellulosic biomass …

Mechanical Dispersion Of A Semi-Solid Binder In A Wet Granulation Process, Justin W. Perry, James D. Litster, Nathan J. Davis

The Summer Undergraduate Research Fellowship (SURF) Symposium

High viscosity surfactant pastes have recently gained popularity in the production of high efficiency laundry detergents due to their ability to increase surfactant loading in granules. When using high viscosity semi-solid binders a unique challenge is presented because it forces granules to be formed primarily by mechanical dispersion; a relatively poorly understood process. Developing mechanistic models of this process will enhance knowledge of mechanical dispersion processes and improve process development for granules produced using this method. Experiments to determine the effect of three process parameters; paste temperature, impeller RPM, and time were carried out in a lab-scale granulator. Binder temperature …

Application Of Fiscal Incentives For Development Of East Natuna Gas Field For Long-Term National Natural Gas Demand, Marwan Batubara, Widodo Wahyu Purwanto, Akhmad Fauzi

Makara Journal of Technology

East Natuna gas field, which has proven reserves of 46 trillion cubic feet, is projected to meet long-term natural gas needs. However, CO2-content of the gas reserves reaches 71%, leading to expensive development costs. This research investigates the feasibility of the field based on several fiscal incentives. Firstly, gas supply-demand until year 2040 was analyzed. Then, based on the analysis, the field was developed using high CO2 gas separation technology to produce gas of 1300 MMSCFD in 2023, 2600 MMSCFD in 2031, and 3900 MMSCFD in 2039. Finally, the economic feasibility was assessed using cash flow analysis in accordance with …

Transmission Electron Microscopy Characterization Of High-Temperatur Oxidation Of Fe-20cr-5al Alloy Prepared By Focused Ion Beam Technique, Mohammad Dani, Pudji Untoro, Teguh Yulius Surya Panca Putra, Parikin Parikin, Joachim Mayer, Arbi Dimyati

Makara Journal of Technology

The Focused Ion Beam (FIB) technique was applied for cross section preparation of the oxidized alloy for Transmission Electron Microscopy (TEM) study. Prior to preparation, the specimens of Fe-20Cr-5Al alloy sheet were oxidized in air at 1200 oC for 2 minutes, 10 minutes, 2 hours, and 100 hours. The microstructure and elemental composition of the samples were characterized using TEM equipped with an Energy Dispersive X-Ray Spectroscopy (EDX). The Electron Energy Loss Spectroscopy (EELS) was used to determine of the light elements. The TEM investigation reveals remarkable microstructure evolution of the specimens during oxidation which generally exhibit a typical multi-layer …

High Temperature Corrosion Of Aluminized Aisi 4130 Steel With The Different Composition Of Nacl/Na2so4 Deposits, Mohammad Badaruddin, Chaur Jeng Wang, Yudhistyra Saputra, Abu Khalid Rivai

Makara Journal of Technology

The high temperature corrosion of AISI 4130 steel can be increased by hot-dip aluminizing coating. The aluminized steel specimens with the deposit composition of 100/0, 30/70, 50/50, 70/30, and 0/100 (wt.%) NaCl/Na2SO4 were oxidized at 750 °C for 1-49 h periods. According to a parabolic rate constant (kp) value, the aluminized steel with deposit composition of 70/30 NaCl/Na2SO4 shows the highest kp value (3.71 × 10-11 g2cm- 4s-1), later followed by the kp value of 3.35 × 10-11 g2cm-4s-1 for 100/0 and the lowest kp value is 7.731 × 10-12 g2cm-4s-1 for 0/100. Whereas, the kp value for the aluminized …

Effects Of Supplier-Manufacturer Relationships On Supply-Chain Performance Of Manufacturing Industries In Indonesia, Rachmad Hidayat, Khisbullah Hudha, Sabarudin Akhmad

Makara Journal of Technology

The present study describes the relationships between commitment, communication, satisfaction, trust, relationship quality with suppliers, and supply-chain performance. The population of the study was manufacturing companies in Indonesia. Respondents were the chief executive officers or corporate secretaries or the designated managers involved in strategic decision making. Samples were taken by using a proportional area random sampling technique. Structural Equation Modeling (SEM) was used for analysis. Results of both direct and indirect testing of hypothesis indicated two hypotheses of positive and significant effects and nine hypotheses of positive but insignificant effects. Those hypotheses of positive and significant effects were the direct …

A New Method For Simulating Power Flow Density Focused By A Silicon Lens Antenna Irradiated With Linearly Polarized Thz Wave, Catur Apriono, Eko Tjipto Rahardjo, Norihisa Hiromoto

Makara Journal of Technology

A terahertz system uses dielectric lens antennas for focusing and collimating beams of terahertz wave radiation. Linearly polarized terahertz wave radiation has been widely applied in the terahertz system. Therefore, an accurate method for analyzing the power flow density in the dielectric lens antenna irradiated with the linearly polarized terahertz wave radiation is important to design the terahertz systems. In optics, ray-tracing method has been used to calculate the power flow density by a number density of rays. In this study, we propose a method of ray-tracing combined with Fresnel’s transmission, including transmittance and polarization of the terahertz wave radiation …

Stochastic Optimization Of Supply Chain Risk Measures –A Methodology For Improving Supply Security Of Subsidized Fuel Oil In Indonesia, Adinda Yuanita, Andi Noorsaman Sommeng, Anondho Wijonarko

Makara Journal of Technology

Monte Carlo simulation-based methods for stochastic optimization of risk measures is required to solve complex problems in supply security of subsidized fuel oil in Indonesia. In order to overcome constraints in distribution of subsidized fuel in Indonesia, which has the fourth largest population in the world—more than 250,000,000 people with 66.5% of productive population, and has more than 17,000 islands with its population centered around the nation's capital only—it is necessary to have a measurable and integrated risk analysis with monitoring system for the purpose of supply security of subsidized fuel. In consideration of this complex issue, uncertainty and probability …

Thermodynamic Analysis Of Irreversible Heat-Transformers, Niccolo` Giannetti, Arnas Arnas, Andrea Rocchetti, Kiyoshi Saito

Makara Journal of Technology

Absorption heat transformers extend the possibilities for efficient and environment-friendly energy conversion processes. Based on a general thermodynamic model of three-thermal cycles with finite thermal capacity of the heat sources, this paper is intent upon analyzing and optimizing the performance of absorption heat transformers, by including the influence of irreversibility in the analytical expression of the system efficiency. Dimensionless parameters for an overall optimization are defined and a first screening is performed to clarify their influence. Dependence on the main factors is highlighted to suggest how to change them in order to enhance the whole system performance. Under this point …

Oxidized Phospholipids Regulation Of The Monocyte Recruitment Parthway In Human Aortic Endothelial Cells, Piao Jian Tan

Masters Theses

Low-density lipoprotein particles in blood plasma invade the endothelium and become oxidized, creating risk of CHD associated with atherosclerosis, the main underlying condition in coronary heart disease. Oxidation products of the phospholipid 1-palmitoyl- 2-arachidonoyl-sn-glycerol-3-phosphatidylcholine (PAPC) are bioactive components of minimally oxidized LDL that stimulate endothelial cells that line the artery, leading to monocyte binding and atherosclerosis. It is hypothesized that the regulation of the monocyte recruitment pathway by these oxidized phospholipids is mediated by the binding of OxPAPC to one or more mediating proteins. Human recombinant VEGFR2, GRP78, and EP2bind to OxPNB, a biotinylated analog of OxPAPC, demonstrated using Western …

Silver Nanoparticle Coated Bioactive Glasses - Composites With Dex/Cmc Hydrogels: Characterization, Solubility, And In Vitro Biological Studies, Anthony W. Wren, Pegah Hassanzadeh, Lana M. Placek, Timothy J. Keenan, Aisling Coughlan, Lydia R. Boutelle, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Silver (Ag) coated bioactive glass particles (Ag-BG) were formulated and compared to uncoated controls (BG) in relation to glass characterization, solubility and microbiology. X-ray diffraction (XRD) confirmed a crystalline AgNP surface coating while ion release studies determined low Ag release (/L). Cell culture studies presented increased cell viability (127 and 102%) with lower liquid extract (50 and 100 ml/ml) concentrations. Antibacterial testing of Ag-BG in E. coli, S. epidermidis and S. aureus significantly reduced bacterial cell viability by 60-90%. Composites of Ag-BG/CMC-Dex Hydrogels were formulated and characterized. Agar diffusion testing was conducted where Ag-BG/hydrogel composites produced the largest inhibition zones …

The Design Of Nanostructures From The Blending Of Flowing Agents Influencing Critical Properties Of A Pharmaceutical Formulation, Casey F. Kick

Masters Theses

In the pharmaceutical manufacturing process, it is well known that flowing agents such as MgSt and Cab-O-Sil widely affect critical flow properties that influence the finished product performance of oral dosage tablets. Though the effects of flowing agents are beneficial to some extent, the sensitivity of the pharmaceutical formulation to process shearing of flowing agents during blending can be catastrophic which often results in product and batch failures. Hence it is essential to study the concentration of flowing agents and chemical nature of active pharmaceutical ingredients (API) with respect to applied process shear on formulations. Previous studies have shown that …

Development And Verification Of A Method To Determine The Long Term Load Carrying Performance Of A Double Sided Pressure Sensitive Adhesive Tape, Rahal Rasheed

Masters Theses

Acrylic foam pressure sensitive adhesive (PSA) tapes are used in various applications as an alternative of mechanical fasteners, especially in areas like structural bonding which requires demanding bond strength and durability.

This research focuses on comparing design values of acrylic foam PSA using static shear test method and dynamic shear test method in accordance of J0MP0164 standard specification. Static shear test has lots of disadvantages; but on the other hand it is the test that mimics the real life usage of a tape in a real life application. Dynamic shear test is a faster way of testing and gives a …

Impact Of Calendering And Silver Addition To Carbon Nanotube-Based Electrodes Used In Printed Multi-Layer Capacitors, Ramea Awni Al-Mubarak

Masters Theses

As the demand for global energy increases, the need for development of alternative clean and sustainable energy technology increases. Creating advanced energy devices with a large storage capacity plays a significant role in this development. This research focused on investigating the performance of capacitor devices used as energy storage cells by optimizing and determining the impact of silver percentage and structure (nano-wires or silver flake) added to CNT ink on the conductivity of printed layers, and studying the influence of calendering the multi-layer capacitor electrodes. Multi-layer capacitors were fabricated by screen printing three alternative layers of conductive and dielectric inks …

Low Melting Glass Frit As An Adhesion And Resistivity Promotor To Silver Nanoparticle Ink Photonically Sintered On Indium Tin Oxide Coated Glass, Jason J. Kleiner

Masters Theses

The objective of this study was the fabrication of a printed circuit resulting from the photonic drying/sintering of conductive circuits, printed using silver nano ink layered on a film of low melting glass frit onto indium tin oxide (ITO) coated glass substrate through the flexographic printing method. The fabrication process flow included material preparation, printing, and photonic drying/sintering in that order.

Investigation of the breakthrough photonic drying/sintering method was studied by varying sintering parameters, specifically the amount of heat energy applied to each specimen, and the speed at which it was applied. Additionally, the adhesion promoting properties of a never …

Synthesis Of Renewable Aromatic Chemicals And Fuels From Biomass Derived Lignin Model Compounds, Bethany Carter

All Dissertations

Lignocellulosic biomass is the most viable choice for producing high-value chemicals, materials, liquid transportation fuels, and energy from a renewable source. Lignin, in particular, is of interest because it serves as the only significant source of renewable aromatic carbon. Commercially, the Kraft pulping process is the predominant method for separating lignin and hemicellulose (collectively called black liquor) from the cellulose fraction of woody biomass. To enable the production of low molecular weight compounds such phenols and aromatic acids, high-purity, low-ash lignin must first be extracted from the black liquor. This separation is achieved using the Sequential Liquid- Lignin Recovery Process, …

System And Process For Upgrading Hydrocarbons, Dennis N. Bingham, Kerry M. Klingler, Joseph D. Smith, Terry D. Turner, Bruce M. Wilding

Chemical and Biochemical Engineering Faculty Research & Creative Works

In one embodiment, a system for upgrading a hydrocarbon material may include a black wax upgrade subsystem and a molten salt gasification (MSG) subsystem. The black wax upgrade subsystem and the MSG subsystem may be located within a common pressure boundary, such as within a pressure vessel. Gaseous materials produced by the MSG subsystem may be used in the process carried out within the black wax upgrade subsystem. For example, hydrogen may pass through a gaseous transfer interface to interact with black wax feed material to hydrogenate such material during a cracking process. In one embodiment, the gaseous transfer interface …

Bioactive Glass Reinforced Elastomer Composites For Skeletal Regeneration: A Review, Ehsan Zeimaran, Sara Pourshahrestani, Ivan Djordjevic, Belinda Pingguan-Murphy, Nahrizul Adib Kadri, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Biodegradable elastomers have clinical applicability due to their biocompatibility, tunable degradation and elasticity. The addition of bioactive glasses to these elastomers can impart mechanical properties sufficient for hard tissue replacement. Hence, a composite with a biodegradable polymer matrix and a bio glass filler can offer a method of augmenting existing tissue. This article reviews the applications of such composites for skeletal augmentation.

Hydrocarbon-Based Fuel Cell Membranes: Sulfonated Crosslinked Poly(1,3-Cyclohexadiene) Membranes For High Temperature Polymer Electrolyte Fuel Cells, Suxiang Deng, Mohammad K. Hassan, Kenneth A. Mauritz, Jimmy W. Mays

Faculty Publications

High temperature fuel cell membranes based on poly(1,3-cyclohexadiene) were prepared by a Polymerization-Crosslinking-Sulfonation (PCS) approach, and a broad range of membrane compositions were achieved using various sulfonating reagents and reaction conditions. Membranes were characterized for their proton conductivity and thermal degradation behavior. Some of the membranes showed up to a 68% increase in proton conductivity as compared to Nafion under the same conditions (100% relative humidity and 120 °C). Thermogravimetric analysis revealed that these membranes are thermally stable up to 200 °C. High proton conductivity and thermal stability, combined with much lower cost as compared to Nafion®, make these materials …

Electrode Side Reactions, Capacity Loss And Mechanical Degradation In Lithium-Ion Batteries, Jiagang Xu, Rutooj D. Deshpande, Jie Pan, Yang-Tse Cheng, Vincent S. Battaglia

Chemical and Materials Engineering Faculty Publications

For advancing lithium-ion battery (LIB) technologies, a detailed understanding of battery degradation mechanisms is important. In this article, experimental observations are provided to elucidate the relation between side reactions, mechanical degradation, and capacity loss in LIBs. Graphite/Li(Ni_1/3Mn_1/3Co_1/3)O₂ cells of two very different initial anode/cathode capacity ratios (R, both R > 1) are assembled to investigate the electrochemical behavior. The initial charge capacity of the cathode is observed to be affected by the anode loading, indicating that the electrolyte reactions on the anode affect the electrolyte reactions on the cathode. Additionally, the rate of “marching” …