Re-Crosslinking Particle Gel For Co₂ Conformance Control And Co₂ Leakage Blocking,
2020
Missouri University of Science and Technology
Re-Crosslinking Particle Gel For Co₂ Conformance Control And Co₂ Leakage Blocking, Yifu Long, Baojun Bai, Thomas P. Schuman
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The present invention generally relates to the composition of particle gels for CO2-EOR and CO2 storage. More particularly, CO2 resistant particle gels are provided that can re-crosslink at subterranean conditions. These particle gels can be deployed to improve the conformance of CO2 flooding, CO2 huff-puff, or Water-Alternative-Gas (WAG). The applications may also involve CO2 storage, such as the blocking of CO2 leakage and similar CO2 processing.
Integrity Testing Of Gas Permeable Silicone Filters,
2020
California Polytechnic State University, San Luis Obispo
Integrity Testing Of Gas Permeable Silicone Filters, Maggie M. Baker, Thomas P. Humann, Kevin J. Yerina
Biomedical Engineering
This report investigates the most reasonable, cost efficient, and reliable ways to integrity test a filter made from a permeable silicone membrane for future biomedical and pharmaceutical applications. The goal of the project was to create a fixture that a pharmaceutical company can use to quickly and reliably test the integrity of the filter. A variety of methods are outlined to test the integrity of the filter, after a series of quantitative tests, a single method was established that meet the requirements most thoroughly. The method that was determined to be most effective involves a series of components including a …
Critical Review Of Asphaltene Properties And Factors Impacting Its Stability In Crude Oil,
2020
Missouri University of Science and Technology
Critical Review Of Asphaltene Properties And Factors Impacting Its Stability In Crude Oil, Sherif Fakher, Mohamed Ahdaya, Mukhtar Elturki, Abdulmohsin Imqam
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Asphaltene is a component of crude oil that has been reported to cause severe problems during production and transportation of the oil from the reservoir. It is a solid component of the oil that has different structures and molecular makeup which makes it one of the most complex components of the oil. This research provides a detailed review of asphaltene properties, characteristics, and previous studies to construct a guideline to asphaltene and its impact on oil recovery. The research begins with an explanation of the main components of crude oil and their relation to asphaltene. The method by which asphaltene …
Insights Into The Applications Of Waste Materials In The Oil And Gas Industry: State Of The Art Review, Availability, Cost Analysis, And Classification,
2020
Missouri University of Science and Technology
Insights Into The Applications Of Waste Materials In The Oil And Gas Industry: State Of The Art Review, Availability, Cost Analysis, And Classification, Abo Taleb T. Al-Hameedi, Husam H. Alkinani, Hussein W. Albazzaz, Shari Dunn-Norman, Mohammed M. Alkhamis
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
This study investigates different types of waste materials and their applicability in the oil and gas industry as well as analyzing various applications of these waste materials in the petroleum industry. This study also explores the availability of these waste materials by performing a statistical analysis in a good number of countries worldwide. The statistical study was performed starting with a study on which countries generate waste the most overall, followed by examining multiple countries and investigating their top three most available waste. The results showed that the USA is the leading country in terms of municipal solid waste generation …
A Data Analysis Of Immiscible Carbon Dioxide Injection Applications For Enhanced Oil Recovery Based On An Updated Database,
2020
Missouri University of Science and Technology
A Data Analysis Of Immiscible Carbon Dioxide Injection Applications For Enhanced Oil Recovery Based On An Updated Database, Sherif Fakher, Abdulmohsin Imqam
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Carbon dioxide (CO2) injection is an enhanced oil recovery technique used worldwide to increase oil recovery from hydrocarbon reservoirs. Immiscible CO2 injection involves injecting the CO2 into the reservoir at a pressure below which it will become miscible in the oil. Even though immiscible CO2 injection has been applied extensively, very little research has been conducted to provide a comprehensive understanding of the mechanism and the applications of immiscible CO2 injection. This research performs an in-depth data analysis is performed based on more than 200 experiments and 20 field tests from more than 40 …
Evaluation Of Diode Laser Application On Chemical Analysis And Surface Microhardness Of White Spots Enamel Lesions With Two Remineralizing Agents,
2020
Missouri University of Science and Technology
Evaluation Of Diode Laser Application On Chemical Analysis And Surface Microhardness Of White Spots Enamel Lesions With Two Remineralizing Agents, Lamiaa Mahmoud Moharam, Doaa Mohamed Sadony, Shaymaa Mohamed Nagi
Chemical and Biochemical Engineering Faculty Research & Creative Works
Background: To investigate the effect of diode laser application and two commercial remineralizing agents on the remineralization and surface microhardness of white spot enamel lesions. Material and Methods: Sixty specimens were prepared then equally divided into six groups (n=10/group), according to the diode laser and the two commercial remineralizing agents applied to demineralized enamel surfaces (APF gel and sodium fluoride NaF mousse) with or without diode Laser application as follows; Group A; control, Group B; diode Laser application, Group C; APF gel application, Group D; NaF mousse application, Group E; APF gel application + diode Laser, Group F; NaF mousse …
Rapid Self-Assembly Of Polymer Nanoparticles For Synergistic Codelivery Of Paclitaxel And Lapatinib Via Flash Nanoprecipitation,
2020
Missouri University of Science and Technology
Rapid Self-Assembly Of Polymer Nanoparticles For Synergistic Codelivery Of Paclitaxel And Lapatinib Via Flash Nanoprecipitation, Shani L. Levit, Hu Yang, Christina Tang
Chemical and Biochemical Engineering Faculty Research & Creative Works
Taxol, a formulation of paclitaxel (PTX), is one of the most widely used anticancer drugs, particularly for treating recurring ovarian carcinomas following surgery. Clinically, PTX is used in combination with other drugs such as lapatinib (LAP) to increase treatment efficacy. Delivering drug combinations with nanoparticles has the potential to improve chemotherapy outcomes. In this study, we use Flash NanoPrecipitation, a rapid, scalable process to encapsulate weakly hydrophobic drugs (logP < 6) PTX and LAP into polymer nanoparticles with a coordination complex of tannic acid and iron formed during the mixing process. We determine the formulation parameters required to achieve uniform nanoparticles and evaluate the drug release in vitro. The size of the resulting nanoparticles was stable at pH 7.4, facilitating sustained drug release via first-order Fickian diffusion. Encapsulating either PTX or LAP into nanoparticles increases drug potency (as indicated by the decrease in IC-50 concentration); we observe a 1500-fold increase in PTX potency and a six-fold increase in LAP potency. When PTX and LAP are co-loaded in the same nanoparticle, they have a synergistic effect that is greater than treating with two single-drug-loaded nanoparticles as the combination index is 0.23 compared to 0.40, respectively.
Mixed Culture Polyhydroxyalkanaotes (Pha) Production Using Crude Glycerol As Carbon Source,
2020
Universiti Malaya
Mixed Culture Polyhydroxyalkanaotes (Pha) Production Using Crude Glycerol As Carbon Source, Mohamad Fauzi Ainil Hawa
Student Works (2020-2029)
Polyhydroxyalkanoates (PHA) is a biopolymer that has the prospect of becoming a preferred renewable and environmentally friendly resource with various applications including in manufacturing and medicine. Intensive studies have been carried out to find the most practical and economical method for PHA production because current commercial production of PHA is stringent and extremely costly. The aim of this study is to enrich PHA-accumulators with high PHA production capabilities by evaluating the stability of the enrichment process and by observing the effect of organic loading rate (OLR) on the production potential. In this study, PHA-accumulators were cultivated using activated sludge with …
Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper,
2020
Hefei National Laboratory for Physical Sciences at the Microscale, Department of Chemical Physics, University of Science and Technology of China, Hefei, 230026, China;
Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen
Journal of Electrochemistry
In this review, we present the major developments in the understanding of the mechanisms of the electrochemical reduction of CO2 from a historical perspective. Most of the work discussed in this review was carried out at copper electrodes, as this is the only material at which hydrocarbons are produced in reasonable quantities. The emphasis focuses on the differentiation of mechanisms for the generation of C1 and C2 products as well as factors and methods for controlling the product selectivity of CO2 reduction. We have highlighted ambiguities, assumptions, and important methodologies, such as differential electrochemical mass spectrometry and electrochemical …
Neuro-Fuzzy Modeling For Predictive Control Systems With Complex Technological Processes And Production,
2020
Tashkent State Technical University named after Islam Karimov
Neuro-Fuzzy Modeling For Predictive Control Systems With Complex Technological Processes And Production, Yusupbekov Nodirbek, Shukhrat Gulyamov, Malika Doshchanova
Chemical Technology, Control and Management
The paper implements a modification of a fuzzy neural network, which is suitable for predictive control purposes. Adaptation of a multidimensional programmable controller based on a neural algorithm for the back propagation of forecasting errors is proposed, as well as neural parametric identification of a fuzzy mathematical model of complex technological processes and production based on experimental data and expert estimates.
Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting,
2020
1. College of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China;
Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li
Journal of Electrochemistry
The Ni-Fe/Ti oxygen evolution electrode was prepared by electrodeposition on a titanium mesh substrate. Then, the as prepared Ni-Fe/Ti electrode was used to derive the Ni-Fe-S/Ti hydrogen evolution electrode through solid phase sulfuration. The effects of the molar ratio of Ni2+ to Fe3+ in the electrolyte and the amount of thiourea on the structures and electrochemical performances of Ni-Fe/Ti and Ni-Fe-S/Ti electrodes were investigated. The results show that the oxygen evolution performance of Ni-Fe/Ti electrode was first increased and then decreased with the increase of nickel ion content in the electrolyte. The Ni9Fe1/Ti electrode exhibited the best oxygen …
Precise Measuring Cells For Quantitative And Qualitative Measurement,
2020
Doctor of Technical Sciences, Professor, Department of Automation and Automation of Production Processes, St. Petersburg Institute of Management and Food Technologies, Address: nab. Griboedov Canal, 7, 191186, St. Petersburg, Russia,
Precise Measuring Cells For Quantitative And Qualitative Measurement, A.A. Begunov, B.M. Akhmedov, R.A. Ibragimov
Chemical Technology, Control and Management
The main provisions considered in assessing the accuracy of methods and measurement results are considered. It is shown that in the experimental assessment of various accuracy indicators, and also when analyzing the content of components in various gaseous media, the sorption-gravimetric measurement method is widely used, methods for measuring the mass of the sorbent and possible sources of error of this technique. Methods of measuring the mass of gas using specific surface areas, including taking into account the contact of gas with a solid material, and also, the amount of adsorbed gas and its pressure, temperature, type and size of …
Features Of Hydration Process, Structure Formation And Curing Processes Of Mono And Polymineral Cement In The Presence Of Additives Of Solid Waste Of Soda Production,
2020
Tashkent Chemical-Technogical Institute, Uzbekistan
Features Of Hydration Process, Structure Formation And Curing Processes Of Mono And Polymineral Cement In The Presence Of Additives Of Solid Waste Of Soda Production, Nargis Shamadinova, Gulnora Abdukadirovna Tokhtakhunova Phd, Temur Azimovich Atakuziev, Shakhnoza Saidanvarovna Rakhimjanova
Chemical Technology, Control and Management
The influence of the additive of solid waste of soda production (SWSP) on the content of -C2S and C3S in cement studied. It was found that SWSP affects the density of the aluminum-containing minerals C3A and C4AF, in addition, in the presence of gypsum, their plasticizing properties improved. The introduction of SWSP additives during grinding of clinker intensifies the grinding process and made it possible to obtain a more plastic cement. It was proved that SWSP with CaCl2 content can be used as an additive to concrete and cement mortars - …
Controlling And Forecasting The Reliability Of Integrated Circuits Of Radio Systems Transmitting Information,
2020
Tashkent State Technical University, Uzbekistan
Controlling And Forecasting The Reliability Of Integrated Circuits Of Radio Systems Transmitting Information, Abdulaziz M. Nazarov Prof, Dilmurod A. Davronbekov Prof.
Chemical Technology, Control and Management
The issues of forecasting the reliability of integrated circuits, which are the main element base of modern radio engineering information transmission systems, are considered. Methods of parametric and functional control are described to determine the correspondence of the static and dynamic parameters of microcircuits to the required values. A combined method for determining the operating parameters of microcircuits is also described. The advantage of this method in addition to the two above methods is indicated that it combines the function of controlling the operation of the entire control system. Two approaches for predicting reliability are given, as well as mathematical …
Investigating The Solution Properties Of Population Model Of Cross-Diffusion Model With Double Nonlinearity And With Variable Density,
2020
Scientific and Innovation Center of Information and Communication Technologies at Tashkent University of Information Technologies named after Muhammad al-Khwarizmi, Address: Amir Temur street, 108, 100200, Tashkent city, Republic of Uzbekistan
Investigating The Solution Properties Of Population Model Of Cross-Diffusion Model With Double Nonlinearity And With Variable Density, Dildora Kabilovna Muhamediyeva
Chemical Technology, Control and Management
The models of two competing populations with double nonlinear diffusion and three types of functional dependencies are considered. The first dependence corresponds to the Malthusian type, the second to the Verhühlst type (logistic population), and the third to Olli-type populations. A common element of this kind of description is the presence of a linear source. Nonlinear sinks are also present in descriptions of populations of the Verhulst and Ollie type. Suitable initial approximations for a rapidly converging iterative process are proposed. Based on a self-similar analysis and comparison of the solutions of the Cauchy problem in the domain for an …
Steady Algorithms For Synthesis Of Multidimensional Controlling Systems With Incomplete Information About The Object State,
2020
PhD., Department Tashkent State Technical University, Tel.: (+99890) 900-56-25
Steady Algorithms For Synthesis Of Multidimensional Controlling Systems With Incomplete Information About The Object State, Uktam Farkhodovich Mamirov
Chemical Technology, Control and Management
In this paper, questions of forming and creation of steady synthesis algorithms of multidimensional controlling systems at incomplete information on object status are considered. It is shown that the matrix of feedback coupling on a status at the complete information is not determined. The different algorithms of steady calculation of a matrix pseudo-inverse to the matrix of outputs using these or those decomposition of matrixes are analyzed. Algorithms of iterative specification of a required solution of "skeletal" decomposition are given. The given expressions allow synthesizing the simplified computing procedures of synthesis of multidimensional controlling systems at incomplete information on object …
Techniques To Solve Decision-Making Problems,
2020
Scientific and Innovation Center of Information and Communication Technologies at Tashkent University of Information Technologies named after Muhammad al-Khwarizmi, Address: Amir Temurstreet, 108, 100200, Tashkent city, Republic of Uzbekistan, Phone:+998-95-195-47-52
Techniques To Solve Decision-Making Problems, Dilnoz Tulkunovna Muhamediyeva, Bekmuratov Fayzievich Tulkun
Chemical Technology, Control and Management
Solving decision-making problems in poorly formalized systems only with the help of deterministic and probabilistic methods is insufficient. To do this, it is necessary to widely apply the methods of hybrid intelligent systems and, especially, the methods of “soft” calculations (SoftCalculation, SoftComputing) and the directions of ComputationalIntelligence — intelligent computing technologies that are emerging on this theoretical and methodological base. An immune - fuzzy algorithm for the synthesis of fuzzy inference systems (FIS) is proposed. A two-stage adaptive FIS synthesis algorithm is described. At the first stage, the initial fuzzy parameters are clustered in order to reduce the number of …
Importance Of Morphological Features In Orthoptera Identification,
2020
Scientific And Innovation Center Of Information And Communication Technologies, Tashkent, Uzbekistan
Importance Of Morphological Features In Orthoptera Identification, Kamilov Mirzoyan, Alisher Khamroev, Hudayberdiev Mirzaakbar
Chemical Technology, Control and Management
This article analyzes the problems of implementing image recognition methods and algorithms for identifying biological objects. The Orthoptera group was chosen as a biological object. Orthoptera is a taxonomic order of insects that includes grasshoppers, crickets, locusts, and others. Approaches to the formation and identification of features of Orthoptera species and the formation of training and control samples of their samples are proposed. Estimation algorithms (ACE) were chosen as algorithmic support for identifying Orthoptera collections. ACE is based on the principle of partial priority. Approaches to the formation of a training and testing complex based on the data from the …
Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets,
2020
State Key Laboratory of Physical Chemistry of Solid Surfaces, Department of Chemistry,College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, Fujian, China;
Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun
Journal of Electrochemistry
The performance of catalysts highly depends on their surface structure and composition. Nanocrystals bounded by high-index facets usually exhibit high catalytic activity due to their high-density low-coordinated step atoms with high reactivity. In this paper, we have reviewed the preparations of noble metals (e.g., Pt, Pd and Rh) nanocatalysts with high-index facets by electrochemical square-wave potential method developed in our group. The square-wave potential method includes a nucleation procedure to generate nuclei, followed by a square-wave potential procedure for a certain period of time for the growth of nuclei into nanocrystals. The formation mechanism of high-index facets is also discussed. …
Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells,
2020
1. Sustainable Energy Laboratory, Faculty of Materials Science and Chemistry, China University of Geosciences Wuhan, Wuhan 430074, China;2. Key Laboratory of Material Chemistry for Energy Conversion and Storage (Huazhong University of Science and Technology), Ministry of Education, Hubei Key Laboratory of Material Chemistry and Service Failure, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, China;
Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng
Journal of Electrochemistry
Proton exchange membrane (PEM) is one of the key components in PEM fuel cells, which possesses the function of separating the cathode and anode, affording proton transport channels and preventing fuel permeability. The property of PEM significantly influences the performance and service life of fuel cells. Nowadays, the commercially used Nafion membranes have the shortcomings of serious fuel permeability, low proton conductivity at elevated temperature and high price, which limits the rapid development of PEM fuel cells. Therefore, it seems to be urgent to develop novel PEMs with low cost and good comprehensive properties. Polymeric proton exchange membrane is an …
