Chemical Engineering Commons^™

Mixed Complex Compounds Of Palmitate, Oleate Calcium With Acetamide, Nicotinamide And Thiocarbamide, Ibadullaeva Tursunoy, Azizov Tokhir, Ibragimova Мavluda

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of the study was the synthesis and study of the structure of mixed complexes of palmitate, calcium oleate with acetamide, nicotinamide and thiocarbamide. The mixed coordination compounds of palmitate and calcium oleate were synthesized. The composition, individuality, thermal behavior, methods of coordinating the palmitate and oleate fragments, acetamide, nicotinamide and thiocarbamide molecules have been established. Comparison of the diffraction patterns of calcium palmitate and oleate, free ligand molecules and synthesized compounds showed the mismatch of the diffractograms, conseqently that the synthesized complexes have an individual crystal lattice different from the starting materials. The method of coordination of amide …

Synthesis Of Esters Of Halogenoacetic Acids, Yuldasheva Muxabbat, Turaev Sherzod

CHEMISTRY AND CHEMICAL ENGINEERING

Amidoalkylating reagents containing a phthalimide group are used in the synthesis of hard-to-reach primary amines and complex heterocyclic compounds. These types of amidoalkylating compounds are suitable reagents for nucleophilic substituted reactions in acidic media due to their resistance to acids. Result of reactions of amidoalkylating reagents-N-hydroxyethylphthalimide and N-hydroxymethylphthalimide with aliphatic carbonic acids can also produce new bactericidal and fungicidal esters. In this study, halogen acids reacted with N-hydroxymethylphthalimide monochloric acetic acid, monobromic acetic acid, monoiodic acetic acid, trifluoric acetic acid and trichloroacetic acid, as well as, N-b-hydroxyethylphthaleidyl monohydric acid. As a result of the reactions, new phthalimidomethyl and phthalimidoethyl esters …

Carbon Nanotube–Liposome Complexes In Hydrogels For Controlled Drug Delivery Via Near-Infrared Laser Stimulation, S. Zahra M. Madani, Mohammad Moein Safaee, Mitchell Gravely, Carolynn Silva, Stephen Kennedy, Geoffrey D. Bothun, Daniel E. Roxbury

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Externally controllable drug delivery systems are crucial for a variety of biological applications where the dosage and timing of drug delivery need to be adjusted based on disease diagnosis and progression. Here, we have developed an externally controllable drug delivery system by combining three extensively used platforms: hydrogels, liposomes, and single-walled carbon nanotubes (SWCNTs). We have developed carbon nanotube–liposome complexes (CLCs) and incorporated these structures into a 3D alginate hydrogel for use as an optically controlled drug delivery system. The CLC structures were characterized by using a variety of imaging and spectroscopic techniques, and an optimal SWCNT/lipid ratio was selected. …

Numerical Simulations Of Current And Temperature Distribution Of Symmetrical Double-Cathode Solid Oxide Fuel Cell Stacks Based On The Theory Of Electric-Chemical-Thermal Coupling, Cheng-Rong Yu, Jian-Guo Zhu, Cong-Ying Jiang, Yu-Chen Gu, Ye-Xin Zhou, Zhuo-Bin Li, Rong-Min Wu, Zheng Zhong, Wan-Bing Guan

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a high-efficient clean conversion device for future energy management. Because of the low antioxidant reduction ability and complex thermal stress, the structure of traditional asymmetrical thin anode-supported planar SOFC is easily to be broken under stack operating conditions. To overcome these defects, a new complete symmetrical SOFC based on double-sided cathodes was developed. To study the influences of gas flow direction and current collection mode on the cell performance inside stack, a numerical model was established by finite element method based on the theory of electro-thermo-chemo multiphysical coupling. By applying this model, the molar …

Effect Of Reaction Conditions On Cu⁃Catalyzed Co2 Electroreduction, Chang Zhu, Wei Chen, Yan-Fang Song, Xiao Dong, Gui-Hua Li, Wei Wei, Yu-Han Sun

Journal of Electrochemistry

Electrochemical conversion of carbon dioxide (CO₂) driven by renewable electricity that can meet both carbon emission reduction and renewable energy utilization has been rapidly developed in recent years. Copper (Cu) catalyst has long been a promising candidate for CO₂ electroreduction applications because of its natural abundance and specific capability of producing a substantial amount of C2 products. However, various metallic Cu electrodes reported have been significantly influenced by the adsorption of certain cation/anion ions, resulting in wide-span catalytic activities and selectivity for various products. In addition, a recent report demonstrated that by virtue of gas-diffusion flow cell …

Plastic Crystal - Gel Polymer Electrolytes For Magnesium Rechargeable Batteries, Diyana Hambali

Student Works (2020-2029)

Polymer electrolytes are known to be the possible substitution for liquid electrolytes due to their excellent safe performance and good compatibility with electrodes compared to its liquid counterpart. Thus, in the present work, gel polymer electrolytes (GPEs) have been studied comprising plastic crystal succinonitrile (SN) to form plastic crystal - gel polymer electrolytes. The GPEs were prepared by using two types of magnesium salts which are magnesium trifluoromethanesulfonate (MgTf2) and magnesium bis(trifluoromethanesulfonimide) (Mg(TFSI)2) varied from 5 to 30 wt.%. In the preparation of GPEs, four GPE systems were introduced which are single plasticized systems (PVdC-co-AN/SN/MgTf2 and PVdC-co-AN/SN/Mg(TFSI)2) and double plasticized …

Core-Shell Structured Ru@Ptru Nanoflower Electrocatalysts Toward Alkaline Hydrogen Evolution Reaction, Xue-Liang Wang, Yuan-Yuan Cong, Chen-Xi Qiu, Sheng-Jie Wang, Jia-Qi Qin, Yu-Jiang Song

Journal of Electrochemistry

Water electrolysis for hydrogen production is beneficial for solving the problem of energy crisis and environmental issues. It is necessary to study highly active and cost-effective catalysts toward hydrogen evolution reaction (HER) to reduce the consumption of noble metals. Herein, we report the synthesis of core-shell structured Ru@Pt_0.24Ru nanoflowers electrocatalyst by stepwise reduction of Ru and Pt precursors in the mixture of oleylamine and benzyl alcohol at 160 ^oC. The average diameter of the resultant Ru@Pt_0.24Ru was 16.5±4.0 nm with a bulk atomic ratio between Pt and Ru of 0.24:1 and a surface ratio of …

Reduction Of Copper And Iron Oxide Mixture With Local Reducing Gases, Shokhrukh Khojiev

Acta of Turin Polytechnic University in Tashkent

The article analyzes the scientific problems of the copper industry. In particular, the main problem with the classical production of copper is the causes of large amounts of slag and the negative impact of these wastes on the environment. Accordingly, the main component that forms the slag is iron, and the higher its content in the original copper concentrate, the more slag is formed, and at the same time a large amount of copper metal is released into the waste. The departure is indicated by evidence. To prevent this problem, a technology has been proposed to reduce copper sulfide concentrates …

Effect Of Microcapsule Content On Diels-Alder Room Temperature Self-Healing Thermosets., Sadella C Santos, John J La Scala, Giuseppe R Palmese

Henry M. Rowan College of Engineering Departmental Research

A furan functionalized epoxy-amine thermoset with an embedded microcapsule healing system that utilizes reversible Diels-Alder healing chemistry was used to investigate the influence of microcapsule loading on healing efficiency. A urea-formaldehyde encapsulation technique was used to create capsules with an average diameter of 150 µm that were filled with a reactive solution of bismaleimide in phenyl acetate. It was found that optimum healing of the thermoset occurred at 10 wt% microcapsule content for the compositions investigated. The diffusion of solvent through the crack interface and within fractured samples was investigated using analytical diffusion models. The decrease in healing efficiency at …

Effect Of Surfactant Addition On The Dispersion And Antioxidant Performance Of Pyrogallol In Biodiesel, Silvya Yusri, Mohammad Nasikin, Hery Sutanto

Makara Journal of Science

Biodiesel is one of the most feasible energy sources that can be used as a replacement for fossil fuel. Biodiesel has several advantages over conventional fuels because of its availability, renewability, and high combustion efficiency. However, biodiesel that contains unsaturated fatty acid methyl esters is prone to oxidation during the blending process and storage period. The complete oxidation reaction of biodiesel produces insoluble gums that could potentially plug the fuel engines. This reaction has become the main barrier for biodiesel to compete with other biofuels. Among several methods, the addition of antioxidants is the most cost-effective method to prevent the …

Detection Of Nucleotides In Hydrated Ssdna Via 2-D H-Bn Nanopore With Ionic-Liquid/Salt-Water Interface, Jungsoo Lee

Multidisciplinary Studies Theses and Dissertations

Accomplishing slow translocation speed with high sensitivity has been the greatest mission for solid-state nanopore (SSN) to electrically detect nucleobases in single-stranded DNA (ssDNA). In this study, a method to detect nucleobases in ssDNA using a SSN is introduced by considerably slowing down the translocation speed and effectively increasing its sensitivity. The ultra-thin titanium dioxide (TiO₂) coated hexagonal boron nitride (h-BN) nanopore was fabricated, along with an ionic-liquid [bmim][PF₆]/2.0 M KCl aqueous (cis/trans) interfacial system, to increase both the spatial and the temporal resolutions. As the ssDNA molecules entered the nanopore, a …

Modeling Residence Time Distribution Of Chromatographic Perfusion Resin For Large Biopharmaceutical Molecules: A Computational Fluid Dynamic Study, Kevin Vehar

KGI Theses and Dissertations

The need for production processes of large biotherapeutic particles, such as virus-based particles and extracellular vesicles, has risen due to increased demand in the development of vaccinations, gene therapies, and cancer treatments. Liquid chromatography plays a significant role in the purification process and is routinely used with therapeutic protein production. However, performance with larger macromolecules is often inconsistent, and parameter estimation for process development can be extremely time- and resource-intensive. This thesis aimed to utilize advances in computational fluid dynamic (CFD) modeling to generate a first-principle model of the chromatographic process while minimizing model parameter estimation's physical resource demand. Specifically, …

Use Of Food Waste Activated Carbons For Wastewater Treatment, Abigale Monasterial

Honors Scholar Theses

Activated carbons are often used to remove phenol from wastewater. However, they are usually derived from expendable resources, such as coal and have high regeneration costs. In this work, the adsorption of phenol on activated carbon derived from food waste was studied to understand its kinetics, determine its maximum adsorption capacity, and compare it to commercial activated carbons. Adsorption experiments were performed at 298 K for 48 hours at various pHs and initial phenol concentrations. The adsorption data was then fit to the pseudo-first order, pseudo-second order, and intraparticle diffusion models to understand the kinetics and to the Langmuir and …

Flow Patterns, Velocity Distributions And Mixing Time In Stirred Tank Reactor Under A Range Of Operating Conditions, Nor Haslina Abdullah

Student Works (2020-2029)

The present work employed a two-dimensional Particle Imaging Velocimetry (PIV) technique to determine the flow patterns and velocity distributions of a down-pumping pitched-blade turbine (4PB) and a Rushton turbine (RT) in a flat-bottom fully baffled stirred vessel (T=0.155m) using distilled water and glycerin as liquids. Fluid velocities increased as the impeller speed increased from 50rpm to 300rpm for both fluids and the RT impeller reached a maximum value of velocity of 1.42m/s at the blade tip. The 4PB had higher velocity compared to RT in glycerin, but RT had higher velocity than 4PB in distilled water. In water, radial flow …

Copper Electrodeposition In Full Wafer Thickness Through-Silicon Vias, Rebecca P. Schmitt

Chemical and Biological Engineering ETDs

Through-silicon vias (TSVs) are a key interconnect technology for advanced packaging of microelectronic devices, and full wafer thickness TSVs are required for certain microelectromechanical systems (MEMS) applications. In this work, electrolytes containing copper sulfate, an acid, chloride, and Tetronic 701 suppressor were implemented for Cu filling of high aspect ratio (10:1), full wafer thickness TSVs. For each electrolyte system, rotating disk electrode voltammetry was used to identify a voltage range for bottom-up Cu filling in the TSVs. Die level feature filling was performed using voltage ramping, which moved active deposition through the vias to yield void-free Cu features. During voltage-controlled …

Pressure-Induced Formation And Mechanical Properties Of 2d Diamond Boron Nitride, Filippo Cellini, Francesco Lavini, Elton Chen, Angelo Bongiorno, Filip Popovic, Ryan L. Hartman, Remi Dingreville, Elisa Riedo

Publications and Research

Understanding phase transformations in 2D materials can unlock unprecedented developments in nanotechnology, since their unique properties can be dramatically modified by external fields that control the phase change. Here, experiments and simulations are used to investigate the mechanical properties of a 2D diamond boron nitride (BN) phase induced by applying local pressure on atomically thin h-BN on a SiO2 substrate, at room temperature, and without chemical functionalization. Molecular dynamics (MD) simulations show a metastable local rearrangement of the h-BN atoms into diamond crystal clusters when increasing the indentation pressure. Raman spectroscopy experiments confirm the presence of a pressure-induced cubic BN …

One-Dimensional Turbulence (Odt): Computationally Efficient Modeling And Simulation Of Turbulent Flows, Victoria B. Stephens, David O. Lignell

Faculty Publications

One-dimensional turbulence (ODT) is an accurate and computationally efficient model for simulating turbulent flows. ODT has been applied to a wide range of flow problems including reaction, multiphase, differential diffusion, heat release, buoyancy, and wall flows. Applications include use as a standalone model and as a closure for large-eddy simulation (LES). Its strength lies in the ability to capture a full range of turbulent length and time scales. The ODT model is strongly coupled with its implementation, complicating its formulations. We present a modern, open-source, object-oriented C++ implementation of ODT. The code described here and made available online can be …

Understanding The Role Of Atom Trapping In The Evolution Of Hydrocarbon Transformation Catalyst Morphology, Griffin Alexander Canning

Chemistry and Chemical Biology ETDs

Converting alkanes to other, more chemically and economically valuable molecules requires catalysts that can survive elevated temperatures and highly reducing environments. These environments can cause many metal-nanoparticle based catalysts to sinter rapidly, causing a loss of activity. They must also tolerate the coke formation, as well, since coke can restrict access to active sites by gas phase molecules, thus lowering catalytic activity. While there are routes to improve both the sinter and coke resistance of catalysts, an alternative strategy is to develop a protocol for regenerating the activity of the catalyst in question when coke formation or sintering becomes problematic. …

An Improved Foam Modeling Technique And Its Application To Petroleum Drilling And Production Practice, Yanfang Wang

LSU Doctoral Dissertations

Foam is one of the most common used multiphase fluid in Underbalanced Drilling (UBD) and Managed Pressure Drilling (MPD). Because of its low density, high capacity of lifting and carrying cuttings, low cost and compatibility with formations, foam has become more superior than the conventional drilling mud when depleted reservoir pressure, severe lost circulation, or unstable borehole are encountered. In general, the success of foam applications rely on the understanding of the fundamentals of foam rheology in downhole conditions.

Foam rheology has been studied for decades. Conventional foam rheological models such as Power Law, Bingham Plastic, Herschel-Bulkley to explain foam …

Well Oiled Machine: Classifying Machinery Performance Reductions Using Work Order Data, Jacob Brionez, Amber Burnett, Cho Kim, Scott M. Whitney, Thomas N. Anderson, Sumeet Treehan

SMU Data Science Review

Work Order (WO) data from System Applications and Products in Data Processing (SAP) software contains valuable information about what WOs intend to accomplish. Using SAP work order data, with time-series machinery sensor data combined into the same dataset, provides an opportunity to optimize prediction models to increase performance. Ideally, WO data can be utilized to help predict machinery's anticipated performance and can help prioritize a WO among others based on the anticipated machinery performance. It is possible to identify anomalies in pump sensor data using the Isolation Forest algorithm as the method for anomaly detection. The relationship between the sensor …