Chemical Engineering Commons^™

Theoretical Analysis Of Mir-Based Differential Photoacoustic Spectroscopy For Noninvasive Glucose Sensing, Tasnim Ahmed, Khan Mahmud, Md Rejvi Kaysir, Shazzad Rassel, Dayan Ban

Electrical and Computer Engineering Faculty Research

Diabetes is a developing global health concern that cannot be cured, necessitating frequent blood glucose monitoring and dietary management. Photoacoustic Spectroscopy (PAS) in the mid-infrared (MIR) region has recently emerged as a viable noninvasive blood glucose monitoring technique. However, MIR-PAS confronts significant challenges: (i) Water absorption, which reduces light penetration, and (ii) interference from other blood components. This paper systematically analyzes the background of photoacoustic signal generation and proposes a differential PAS (DPAS) in the MIR region for removing the background signals arising from water and other interfering components of blood, which improves the overall detection sensitivity. A detailed mathematical …

Comparing And Optimizing Hollow Fibre And Flat Sheet Vacuum Membrane Distillation, Hamed Kariman, Mehdi Khiadani, Hussein A. Mohammed

Research outputs 2022 to 2026

Membrane Distillation (MD) systems have the potential to tackle the growing global water demand. Within various MD systems, Vacuum Membrane Distillation (VMD) systems are particularly important in addressing this issue. Hollow Fibre VMD (HF-VMD) and Flat Sheet VMD (FS-VMD) are the two main configurations of VMD systems, where limited studies are available on their comparison and optimisation under identical operational conditions. This study firstly charts the mathematical modelling of HF-VMD and FS-VMD systems that have been developed, accounting for the amount of flux, Gain Output Ratio (GOR), Temperature Polarisation Coefficient (TPC), and Specific Thermal Energy Consumption (STEC) of both configurations …

Applications For The Quasi-Atomic Orbital And Constrained Density Functional Theory Methods On Catalytic Reactions, Alvaro David Loaiza Orduz

LSU Doctoral Dissertations

Selective activation of C–O, C–H, and C–C bonds underpins biomass upgrading, alkane functionalization, and CO₂ conversion. Despite their importance, the electronic factors governing catalytic performance remain incompletely understood, and many industrial processes still rely on empirical trends or material-specific observations. This dissertation addresses this gap by applying density functional theory (DFT), thermodynamic decomposition, and electronic-structure analysis to identify unifying principles of reactivity across transition-metal phosphides, vanadate oxides, copper-based electrocatalysts, and mixed IrO₂–RuO₂ layers. This work examines how charge transfer, orbital localization, and ligand-induced perturbations control reaction pathways in diverse catalytic systems. C–O bond scission in 2-methyltetrahydrofuran (MTHF) and methanol was …

Distributed Model Predictive Control-Based Power Management Scheme For Grid-Integrated Microgrids, Sergio Escareno, Sijo Augustine, Liang Sun, Sathishkumar J. Ranade, Olga Lavrava, Enrico Pontelli, John Hedengren

Faculty Publications

Transitioning from traditional electrical grids to smart grids is currently an ongoing process that many nations are striving for due to their access to renewable resources. Energy management is one of the key parameters that decides the performance of such complex systems. Distributed Model Predictive Control (DMPC) is a promising technique that can be used to improve the energy management of grid-connected systems. This paper analyzes a grid-connected inverter system with DMPC that exchanges key operating parameters with the grid to optimize coordinated power sharing between its respective loads. The state-space model for the inverter is derived and verified to …

Molecular Survival Strategies Against Kidney Filtration: Implications For Therapeutic Protein Engineering, William Heaps, Anna Elise Packard, Kristina M. Mccammon, Tyler P. Green, Joseph P. Talley, Bradley C. Bundy, Dennis Della Corte

Faculty Publications

The glomerular filtration barrier poses a significant challenge for circulating proteins, with molecules below ~60–70 kDa facing rapid renal clearance. Endogenous proteins have evolved sophisticated evasion mechanisms including oligomerization, carrier binding, electrostatic repulsion, and FcRn-mediated recycling. Understanding these natural strategies provides blueprints for engineering therapeutic proteins with improved pharmacokinetics. This review examines how endogenous proteins resist filtration, evaluates their application in protein engineering, and discusses clinical translation including established technologies (PEGylation, Fc-fusion) and emerging strategies (albumin-binding domains, glycoengineering). We address critical challenges of balancing half-life extension with tissue penetration, biological activity, and immunogenicity—essential considerations for the rational design of next-generation …

Precision Acoustofluidics For High-Throughput Mechanobiology In Suspension Cells, Kaichun Yang, Ruoyu Zhong, Ke Li, John Mai, Pengzhan Liu, Ye He, Joseph Rich, Ying Chen, Janna Wang, Zhiteng Ma, Zhiteng Ma, Xianchen Xu, Qian Wu, Tony Jun Huang

Faculty Publications

Mechanomodulation, the process of altering cellular behavior through applied mechanical forces, plays a critical role in physiological processes and has substantial implications for cancer therapy, immunology, and drug development. However, precise and efficient stimulation of nonadherent cells remains a major challenge, limiting the investigation of mechanotransduction pathways and the development of targeted therapeutics. Here, we developed an acoustofluidic platform named Suspension-cell Targeted Response to Excitation via Acoustofluidic Mechanomodulation (STREAM) to enable precise, high-throughput stimulation of suspension cells. STREAM accomplishes this using 101.14-megahertz high-frequency surface acoustic waves to deliver controlled mechanical stimulation at a throughput of 500,000 cells per minute. STREAM …

Continuous Sorption Of Ionic Dyes Onto Nanoporous Faujasite Zeolite And The Regeneration Of The Adsorbent, Frederick O. Oshomogho, Miracle Aisosa Omorogieva

BAU Journal - Science and Technology

This study evaluates the efficiency of synthesized faujasite zeolite in the continuous removal of methylene blue from water and tests the reusability of the regenerated adsorbent. Faujasite Zeolite was synthesized from locally available aluminosilicate clay in Edo State using standard methods documented in the literature. XRF analysis affirmed the elemental composition, showing high levels of silica and alumina, which increased its adsorption capacity. SEM images depicted a crystal-clear structure with an octahedral shape and visible micro-pores on the surface. TGA showed effective thermal stability below 300 ºC, with a 10% weight loss between 28.59 ºC and 300 ºC. BET analysis …

Ion-Imprinted Polymer-Based Sensors For Toxic Metal-Ion Detection In Water: Coordination Chemistry, Transduction Strategies, And Environmental Applications, Ghita Yammouri, Gymama Slaughter

Center for Bioelectronics Publications

Toxic metal contamination in aquatic environments remains a persistent threat to human health and ecosystems. Yet, the high cost, infrastructure demands, and centralized nature of conventional analytical methods constrain routine monitoring. Ion-imprinted polymers (IIPs), a subclass of molecularly imprinted polymers, have emerged as promising synthetic recognition materials for metal-ion sensing because they generate coordination-defined binding sites with high selectivity, chemical stability, low cost, and reusability. This review summarizes recent advances in Ion-imprinted polymer (IIP)-based sensing technologies for toxic metal-ion detection in water from 2016 to 2026. It examines the fundamental recognition chemistry of IIPs, major synthesis strategies used to generate …

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling CO₂ channeling in heterogeneous reservoirs remains a major challenge for both enhanced oil recovery (EOR) and secure geological storage. AMPS-HPAM copolymers exhibit high-temperature resistance and brine tolerance compared with conventional HPAM gels, making them well suited for the harsh environments associated with CO₂ injection. Chromium-based crosslinkers (CrAc and CrCl₃) were investigated because sulfonic acid groups in AMPS can coordinate with trivalent chromium ions, enabling dual ionic crosslinking and the formation of a robust gel network. While organic crosslinked AMPS-HPAM gels have been widely studied, the behavior of chromium-crosslinked AMPS-containing systems, particularly their gelation kinetics under …

Solubility And Dissolution Mechanism Of Novel Multi-Ester Headgroup Surfactants In Supercritical Co2, Ning Xu, Yan Ling Wang, Baojun Bai, Shi Zhang Cui, Yu Zhang, Wen Jing Shi, Zhao Nian Zhang, Wen Hui Ding, Pei Xu Ma, Zan Gao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To address the limited solubility and applicability of conventional hydrocarbon surfactants in supercritical CO₂, a series of multi-ester headgroup surfactants were designed and synthesized by leveraging the CO₂-philic properties of ester groups. The molecular structures were characterized using Fourier transform infrared (FT-IR) spectroscopy and ¹H NMR. A custom-designed laser-based apparatus was developed to quantify surfactant solubility and systematically investigate phase behavior in CO2. Molecular dynamics (MD) simulations were employed to elucidate structure–solubility relationships across multiple scales, including solubility parameters, interaction energies, radial distribution functions (RDFs), and free volume fractions. Results indicate that, at 323.15 K, …

Insights Of Quantitative Imaging And Instantaneous Heat Transfer Coefficient Measurement In Spouted Bed Column, Hasan A. Abdulwahab, Abbas J. Sultan, Amer A. Abdulrahman, Haydar A.S. Aljaafari, Ali A. Yahya, Zahraa W. Hasan, Malik M. Mohammed, Laith S. Sabri, Bashar J. Kadhim, Jamal M. Ali, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, the heat transfer behavior of a conical spouted bed column was imaged for the first time across its entire cross-sectional area and at multiple axial heights. To achieve this, a custom-built quantitative imaging approach was developed. This method combined FluxTeq heat flux sensors with an Arduino-based data acquisition system. The experimental setup enabled instantaneous, spatially resolved measurements of surface temperature, heat flux, and local heat transfer coefficients (LHTC) under various operating conditions. Measurements at different radial locations, angles, and heights provided a comprehensive view of heat transfer behavior throughout the column. The obtained cross-sectional images show that …

Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

Preferential fluid flow remains a major challenge in subsurface energy production and gas storage operations, resulting in excessive water production in mature oil fields, reduced heat extraction in geothermal reservoirs, and low sweep and storage efficiency in CO₂-EOR projects. Polymer gels are widely used to mitigate high-permeability channels; however, conventional systems exhibit limited plugging efficiency and short lifetimes in ultra-high-temperature reservoirs due to poor thermal stability. This study presents a novel ultra-high-temperature-resistant preformed particle gel (UHT-PPG) developed for conformance control in reservoirs with temperatures of 150–275 °C and severe super-K or channeling problems. The material was evaluated in …

Charge‐Governed Mechanistic Evaluation Of Aav2 Clarification Via Functionalized Flat Sheet And Hollow Fiber Deconstructed Depth Filters, Mara Baughman‐Leach, Mattie Brock, Malgorzata Chwatko, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

The expansion of adeno-associated virus (AAV)-based therapeutics has increased the demand for efficient clarification. In this study, a functionalized deconstructed depth filtration platform was developed to dissect how membrane–virus charge, modulated by pH, influences separation. Three charge regimes, positive (pH 4), neutral (pH 6), and negative (pH 8) between the membranes and AAVs, were examined. The flat-sheet system, composed of sequential 1.2, 0.8, 0.45, and 0.1 µm membranes, enabled the first layer-by-layer analysis of depth filtration behavior. This revealed that Stage 1 and Stage 4 dominate clarification. Remarkably, substantial DNA capture (> 75%) was observed even in the largest-pore stage, …

Creep-Recovery Behavior Of Copper Springs At Low Stresses, Ming-Yen Tsai, Shou-Yi Chang, Yi-Chia Chou, Jyun-Lin Hu, Yulin Zhang, Fuqian Yang, Sanboh Lee

Chemical and Materials Engineering Faculty Publications

Copper springs, unlike conventional wires, endure complex stress states such as torsion and bending under sustained thermal and mechanical loads. This study examines the time-dependent creep-recovery behavior of copper springs under low tensile forces at temperatures ranging from 523 K to 623 K, focusing on springs with spring indexes (ratio of mean spring diameter to wire diameter) of 6.4, 8.5, and 9.6. The non-linear Burgers model with a Kelvin solid effectively captures the deformation response and mirrors dislocation nucleation and annihilation kinetics. SEM and TEM imaging reveal that low-angle grain boundaries (LAGBs) act as both dislocation sources and sinks. The …

Computational Study Of Rotating Detonation Combustors, Aditya Balasubramaniam

Mechanical and Aerospace Engineering Theses

Rotating detonation combustors (RDCs) are pressure-gain combustion devices that sustain one or more continuously rotating detonation waves, offering potential thermodynamic and performance advantages over conventional deflagration-based systems. Their behavior depends strongly on combustor geometry and operating conditions. Understanding these effects is therefore essential for the design and optimization of practical RDCs. Accordingly, this thesis numerically investigates annular RDCs with two primary objectives: (1) to evaluate the effects of propellant mass flux and (2) to assess the influence of annular width on detonation-wave dynamics and combustor performance.

A finite-volume framework is used to solve the compressible reactive Euler equations with hydrogen–air …

Age-Related Hearing Loss Involves Mitochondrial Dna Instability And Copy Number Depletion In The Cochlea: Insights From In Vivo And In Vitro Models, Akil Turner, Bo Ding, Xiaoxia Zhu, Tam Nguyen, Parveen Bazard, Robert D. Frisina

Chemical and Biochemical Engineering Faculty Research & Creative Works

Age-related hearing loss (ARHL) is a highly prevalent sensory neurodegenerative disorder that involves various molecular mechanisms. The present study investigated if age-related oxidative stress (OS) induces alterations in mitochondrial DNA (mtDNA) copy number and heteroplasmy, using complementary in vivo and in vitro models. Aged (30-month) CBA/CaJ mice have elevated auditory brainstem response (ABR) thresholds amplitudes vs. young (3-month) CBA/CaJ mice, a key physiological characteristic of ARHL The in vitro experiments employed the strial SV-K1 cochlear cell line treated with hydrogen peroxide (H₂O₂). Both the aged cochleae and H₂O₂-treated cells exhibited a significant …

A Four-Step Thermocatalytic Route For Converting Co2 Into High-Purity Oxalic Acid, Hao Feng, Muhammad Kashif Khan, Lei Li, Hongyan Ma, Xinhua Liang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This research outlines a four-step methodology for transforming CO₂ into high-purity oxalic acid. CO2 was first sequestered as KHCO₃ through its reaction with aqueous KOH, followed by hydrogenation using a supported AgPd/CNT catalyst in a batch reactor at an initial H₂ pressure of 60 bar and a temperature of 150°C. The formate yield reached 91.8% at optimum conditions. Potassium formate in the solid state was thermally coupled in the presence of KOH at 400°C under N2 flow, yielding potassium oxalate of up to 76% yield. The final step was the selective precipitation of potassium oxalate with ferrous …

Ensemble Dependence Of Mechanical Relaxation In Molecular Dynamics Simulation, Mason E. Hyde

Open Access Master's Theses

This thesis investigates whether the selection of thermodynamic ensemble introduces quantifiable differences in the stress relaxation modulus G(t), storage modulus G”(w), loss modulus G”(w), and phase angle d(w) computed from equilibrium molecular dynamics simulations of the AAA-1 asphalt model. A 72-molecule, 12-component representation of AAA-1 bitumen was simulated under three ensembles (NPT, NVT, and NVE) at three temperatures (400.15 K, 443.15 K, and 533.15 K) with three independent replications at each condition, yielding 27 total simulations. Stress autocorrelation functions were computed from each production trajectory and Fourier-transformed to obtain frequency-dependent rheological properties.

The computed properties …

Mental Health And Help-Seeking In Engineering Education: Beliefs, Norms, And Intervention Pathways For Undergraduate Students, Matthew D. Whitwer

Theses and Dissertations--Chemical and Materials Engineering

Engineering education is at a critical juncture where supporting student mental health is essential for fostering persistence, equity, and the development of a resilient and innovative workforce. While engineering students experience high levels of distress and low rates of mental health treatment seeking (known as a mental health treatment gap), there is a gap in knowledge around how this compares to that of students in other fields of study. Further, while efforts have been made to improve the mental health treatment gap in engineering, they are limited by a lack of actionable, theory-based targets. Therefore, this dissertation aims to characterize …