Chemical Engineering Commons^™

Economic Feasibility Of Mixed Plastic Waste Pyrolysis Using Twin Reactor System In Northwest Arkansas, Carol Rogers, Patricia Means, Renato Gonzalez, Kaida Sheets, Hayden Townsend

Chemical Engineering Undergraduate Honors Theses

Plastic waste generation is increasing at an unsustainable rate while recycling solutions remain stagnant. As a chemical means of recycling, mixed plastic waste pyrolysis can generate synthetic oil appropriate for use as fuel in power generation from plastic waste that otherwise accumulates in landfills. With the scaling of a commercial plastic pyrolysis process in Northwest Arkansas (NWA) modeled after an operational sawdust pyrolysis unit in Huntsville, Arkansas, economic analysis resulted in 26.3% internal rate of return. Therefore, construction of a commercial mixed plastic-to-fuel pyrolysis plant is economically justified and should be pursued. To effectively implement the proposed design, NWA must …

Valorization Of Secondary Agriculture Residues, Narendra Kumar

Doctoral Dissertations

Secondary agriculture residues have the potential to be major contributors as resources for energy and sustainably sourced materials production. Separating secondary agricultural residues, which have already been transported to processing centers, into individual biomass components could convert these wastes into bioproducts. Many types of pretreatments to achieve this separation involve chemicals that are hazardous for the environment. Several deep eutectic solvents (DES) that are biocompatible have been investigated for their ability to deconstruct rice hulls and sugarcane bagasse. Mass yield, enzymatic hydrolysis of the pretreated biomass, fiber analysis, and Fourier transform infrared spectroscopy have confirmed that the DES formic acid:choline …

In Vivo Analysis Of A Proprietary Glass-Based Adhesive For Sternal Fixation And Stabilization Using Rabbit And Sheep Models, Cina Mehrvar, Emily Deignan, Mark Hurtig, Gideon Cohen, Paul Zalzal, Oleg Safir, Adel Alhalawani, Marcello Papini, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Wire cerclage remains the standard method of care for sternal fixation, following median sternotomy, despite being beset with complications. An emerging treatment option has been to augment the wires with an adhesive. A patented ionomeric glass (mole fraction: SiO₂:0.48, ZnO:0.36, CaO:0.12, SrO:0.04) has been used to formulate GPC+, a glass polyalkenoate cement (GPC), by mixing it with poly(acrylic) acid (PAA) and de-ionized water. In a human cadaver study, this material, when applied with wire cerclage, was able to significantly reduce sternal instability. However, the material has yet to be tested in pertinent animal models. Here, after a series …

Dynamics In Drops As Confined Systems Containing Nanoparticles: Reformation Of Nanoparticles And Evaporation Of Water, Vijitha Mohan, Xianjie Qiu, Partho Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Brine is used to displace crude oil in a reservoir and its performance improves when brine contains nanoparticles. It is the presence of nanoparticles in confinements, such as at dynamic contact lines and in thin films, which is of importance. The investigators here have determined a fast way to obtain confined systems by evaporating a small drop of water containing nanoparticles. Water droplets containing nanoparticles of alumina or silica were evaporated on surfaces of polyethylene terephthalate sheets, which are partially wet by water, and glass which is fully wet. After the liquid in the drops evaporated, the residues were examined …

Heavy Oil And Vapex Process: A Brief Review, Vijitha Mohan, Parthasakha Neogi, Baojun Bai

Chemical and Biochemical Engineering Faculty Research & Creative Works

Heavy oil recovery requires either heat or solvent assistance to reduce its high viscosity first and then the less viscous oil can be recovered. Processes that use vapor assisted petroleum extraction (VAPEX) utilize vaporized solvent. Solvent vapors are introduced through a top injection well to induce viscosity reduction and the less viscous oil is collected at the bottom production well. It is noteworthy, that the solvent itself when recovered, can be seen as an integral part of oil. Exact molecular weight and chemistry of heavy oil is uncertain making analysis of thermodynamic properties difficult, however this is overcome by making …

Household Income And Air Pollution At Public Schools In The United States, Katyland Facas, Kristina Wagstrom

Honors Scholar Theses

Poor air quality at schools may negatively impact students’ academic performance.1 2 3 In this study we look at the relationship between ambient, outdoor air quality and student socioeconomic status at United States public schools. We used free and reduced lunch eligibility, as part of the USDA’s National School Lunch Program, as an indicator of household income. We focus on nitrogen dioxide (NO2), ozone (O3), and particulate matter smaller than 2.5 microns (PM2.5). We used ambient pollutant concentration estimates at census block group resolution (Kim et al.) as the outdoor air pollution concentration at each school.4 We found a positive …

Comparison Of Tensile Properties Of Triaxial Braided Carbon Fiber Composites Made From Vacuum Assisted Resin Transfer Molding (Vartm) And Autoclave Molding, Donald A. Klosterman, Charles Browning

Chemical and Materials Engineering Faculty Publications

Triaxially braided fiber composites are increasingly being used in aerospace, ballistic, and sporting good applications due to their inherent damage tolerance, torsional stability, and cost compared to woven fabrics and unidirectional preforms. There have been numerous publications over the past 15-20 years on the mechanical properties and failure mechanisms of triaxial braided composites. However, most of these have involved panels made with autoclave curing. In the present study, braided carbon fiber composites were made using autoclave curing and vacuum assisted resin transfer molding (VARTM). The goal of the study was to compare the physical and tensile properties of quasi-isotropic panels …

Peptoid-Based Microsphere Coatings For Biomaterial Applications, Jesse Leland Roberts

Graduate Theses and Dissertations

Peptoids are peptidomimetic oligomers that predominantly harness similarities to peptides for biomimetic functionality. The incorporation of chiral, aromatic side chains in the peptoid sequence allows for the formation of distinct secondary structures and self-assembly into supramolecular assemblies, including microspheres. Peptoid microspheres can be coated onto substrates for potential use in biosensor technologies, tissue engineering platforms, and drug-delivery systems. They have the potential for use in biomedical applications due to their resistance to proteolytic degradation and low immunogenicity. This dissertation focuses on the physical characteristics and robustness of the peptoid microsphere coatings in various physiological conditions, along with their ability to …

Surface Modified Polypropylene Membranes For Treating Hydraulic Fracturing Produced Waters By Membrane Distillation, Tharaka Hawpe Gamage

Graduate Theses and Dissertations

Membrane distillation is an emerging technology for treating hydraulic fracturing flowback and produced waters. Suppression of membrane fouling by inorganic and polar and non-polar organic compounds is a challenge. Here polyhydroxyethyl methacrylate, polyacrylic acid, polvinylallyl imidazolium bromide and polyvinylhexyl imidazolium bromide chains have been grafted from the membrane surface. Fouling is initially due to adsorption of organic compounds followed by scale formation. When challenged with produced water, membranes modified with polvinylallyl imidazolium bromide chains provided the greatest resistance to fouling. For EC pretreated produced water and synthetic produced water that contained mainly inorganic species, the flux decline was much less.

Investigative Study Of Microalgal And Electrochemical Wastewater Treatment Systems And Modeling Of The Wafer-Enhanced Electrodeionization Using Supervised Learning, Humeyra Betul Ulusoy Erol

Graduate Theses and Dissertations

Wastewater has a serious impact on environment and public health due to its high concentration of nutrients and toxic contaminants. Without proper treatment, excess nutrients discharged in wastewater can cause a damage to the ecosystem such as undesirable pH shifts, cyanotoxin production, and low dissolved oxygen concentrations.

Main objectives of this dissertation work were to investigate i) the biofuel potential of P. cruentum when grown in swine wastewater, ii) the influence of four most commonly used ion exchange resins on the system efficiency and selectivity for the removal of sodium, calcium, and magnesium ions, and iii) the modeling of wafer-enhanced …

Mapping Three Dimensional Interactions Between Biomolecules And Electric Fields., Joseph Patrick Brian P.E.

Electronic Theses and Dissertations

Electroporation is a technique that induces the formation of open pores in cell membranes by the application of an electric field. Electroporation is widely practiced in research and clinical work for transfection of genetic sequences and drug molecule transport through the membrane barrier. However, a full theoretical explanation of the molecular mechanisms and thermodynamics responsible for pore formation, structure, and longevity does not yet exist. Advances in molecular dynamics simulations have enabled theoretical studies of electroporation with previously unobtainable fidelity spanning biologically relevant timescales. All-atom simulations utilizing the recently developed method of computational electrophysiology demonstrate that pore size correlates to …

Ceramic Tiles Production From Cullet And Agricultural Wastes Obtained From Wheat And Sugarcane Cultivation, Mai H. Roushdy

Chemical Engineering

Agricultural wastes are a big source for environmental pollution so it’s a good choice to recycle them so as to get an environmental and economic benefit. The purpose of this research is to determine the possibility of recycling two types of agriculture wastes obtained from wheat and sugarcane cultivation in addition to broken glass (cullet) as raw materials for ceramic wall tiles production. The used agriculture wastes are the agricultural residue obtained from wheat and sugarcane cultivation. The experimental work starts with performing XRF and sieve analysis for all raw materials. Ceramic wall tiles specimens were made with dimensions 110.4 …

Degradation Of Antibiotics In Aqueous Phase Using Pms Catalytic Decomposition With Zero-Valent Iron Nanoparticles Immobilized In Sba-15, Ahdee Bluma Zeidman

UNLV Theses, Dissertations, Professional Papers, and Capstones

Zero-valent iron nanoparticles (nZVI) have been studied as an option for soil remediation and water treatment for many years. The capability of nZVI to produce oxidation/reduction processes, depending on the reaction conditions, has attracted great interest with their major drawback being reactivity loss through agglomeration. The loss in nZVI surface area has been reported to be prevented through immobilization onto a porous media (e.g., SBA-15, MCM-41, or zeolites). In this work, a mesoporous silica structure (SBA-15) is used as an nZVI supporting material to enhance its reactivity and promote peroxymonosulfate (PMS) catalytic decomposition for the degradation of antibiotics in aqueous …

Process Design And Optimization Of A Once-Through Dimethyl Ether Process Using Aveva Process Simulation, Jerrod Scott

Honors Theses

The primary purpose of the project on which I wrote this thesis was to design an optimize a once-through dimethyl ether process utilizing a software called AVEVA Process Simulation. The process was initially modeled and optimized to minimize the EAOC of the distillation column. The result of that effort was an optimized column with six stages with the feed entering the column at stage six. It had a height of 3 m, diameter of 0.44 m, and an EAOC of $65,100. This optimized solution was submitted to a Toller. The Toller provided available equipment to model the plant. From here, …

Economic Feasibility Of A Methanol To Dimethyl Ether Production Process To Avoid Contract Failure Shortfalls From The Covid-19 Pandemic, Jacob Noll, Robert Wasson, Harrison Mckinnis

Honors Theses

Our team entered the 2021 AVEVA Academic Competition, where teams of undergraduate senior chemical engineering students competed across the country. The competition was composed of two parts: the base case design and the optimization of a chemical process. As part of the competition, our team is acting as the Engineering team for a fictional company that has given us this project. Due to COVID-19, our methanol producing company has lost a contract with a customer, leaving 23,000 tonnes/yr of unclaimed methanol. We have two choices with this methanol: either sell the methanol on the market at the spot price for …

Design Of An Undergraduate Laboratory Experiment Utilizing A Stirred-Tank, Jacketed Bioreactor, Brennen Middleton

Honors Theses

Bioreactors are utilized in many industries, such as the food, alternative fuel, and pharmaceutical industries, to design and manufacture products. Unlike the similar chemical batch reactors utilized in many chemical processing facilities, bioreactor utilization requires engineers to consider a wider range of operating conditions and parameters. This results in a more complex reaction system and controls network. Due to this, it is imperative for chemical and biomedical engineering students to not only understand the theory surrounding these reactor systems, but also understand how to properly design and perform operating procedures with these systems. Thus, it was determined to create an …

Ethylbenzene Production Case Study And Optimization, Brandon Borek

Honors Theses

The objective of this project was to investigate the process of producing ethylbenzene from the liquid-phase reaction of ethylene and benzene and perform parametric and topological optimizations to increase the net present value of the production facility. To do so, the base case conditions of the process were modeled and quantified economically followed by an investigation into the existing process to determine conditions that could be altered to improve the economic viability of the project. After optimizing the parametric conditions and topology of the process, the net present value of the project was increased by 305 million dollars to 191 …

Predicting Henry's Law Constants Of Volatile Organic Compounds Present In Bourbon Using Molecular Simulations., Christopher A Abney

Electronic Theses and Dissertations

Henry’s Law describes the partitioning of molecules into liquid and gas phases at low concentrations. Henry’s Law, which is based upon a species-dependent constant and the gas phase partial pressure, is useful for predicting phase behavior of dilute solutes. However, Henry’s Law constants are difficult to measure experimentally or to predict using structure-property or thermodynamic models. Herein, molecular simulations were used to calculate Henry’s Law constants for 18 volatile organic compounds (VOCs) present in bourbon. The novel simulations analyzed solvation thermodynamics of small organic molecules in 120 proof ethanol. A fast-growth non-equilibrium free energy method was used in which the …

Annealing Of Encapsulated Heavy Metals From Brine Water Utilizing Microwave Enabled Sol-Gel Process, Adam Michael Flynn

Electronic Theses and Dissertations

Various waste encapsulation strategies have been investigated to solidify and stabilize heavy metal wastewater for proper long-term storage. This work aims to enhance a method of novel sol-gel encapsulation of heavy metals from mock brine waters using tetramethyl orthosilicate with the addition of an annealing step at various temperatures in order to reduce leaching of metals from the silica monoliths when exposed to water. The metals tested for encapsulation and leaching were mercury (II) chloride, potassium dichromate, sodium selenite, boric acid, cadmium chloride, and copper (II) acetate. The annealing of the silica monoliths led to an increased degree of for …

Image Analysis Of Charged Bimodal Colloidal Systems In Microgravity., Adam J. Cecil

Electronic Theses and Dissertations

Colloids are suspensions of two or more phases and have been topics of research for advanced, tunable materials for decades. Stabilization of colloids is typically attributed to thermodynamic mechanisms; however, recent studies have identified transport or entropic mechanisms that can potentially stabilize a thermodynamically unstable colloidal system. In this study, suspensions of silsesquioxane microparticles and zirconia nanoparticles were dispersed in a nitric acid solution and allowed to aggregate for 8-12 days in microgravity aboard the International Space Station. The suspensions were subsequently imaged periodically at 2.5x magnification. Due to the inadequacy of existing image analysis programs, the python package “Colloidspy” …