Impact Of Composition And Salinity On Swelling And Gel Strength Of Poly (Acrylamide-Co-Acrylic Acid) Preformed Particle Gel,
2023
Missouri University of Science and Technology
Impact Of Composition And Salinity On Swelling And Gel Strength Of Poly (Acrylamide-Co-Acrylic Acid) Preformed Particle Gel, Ahmed Ben Ali, Reem Elaf, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The effects of various material compositions and reservoir environments on the ultimate strength and swelling kinetics of a commercial preformed particle gel (PPG) have been investigated. This study used different ratios of acrylamide and acrylic acid copolymers with a specific crosslinker concentration. Results have indicated that increasing the acrylic acid proportion enhances the PPGs' ability to swell but weakens their network structure. In contrast, increasing the crosslinker content decreases the swelling ratio and increases the gel strength. The highest equilibrium swelling capacity among the six preformed particle gel samples was obtained for PPG2, which has the highest acrylic acid amount …
Prediction Of Single Proppant Terminal Settling Velocity In High Viscosity Friction Reducers By Using Artificial Neural Networks And Xgboost,
2023
Missouri University of Science and Technology
Prediction Of Single Proppant Terminal Settling Velocity In High Viscosity Friction Reducers By Using Artificial Neural Networks And Xgboost, Xiaojing Ge, Rong Lu, Ghith Biheri, Abdulmohsin Imqam, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
High viscosity friction reducers (HVFRs) have been recently gaining more attention and increasing in use, not only as friction-reducing agents but also as proppant carriers. The settling velocity of the proppant is one of the key outputs to describe their proppant transport capability. However, it is influenced by many factors such as fluid properties, proppant properties, and fracture properties. Many empirical/physics-based models and correlations to predict particle settling velocity have been developed. However, they are usually based on certain assumptions and have applicable limits. In contrast, machine learning models can be considered as a black box. The objective of this …
Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels,
2023
Missouri University of Science and Technology
Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Preformed particle gels (PPG) have been widely applied in oilfields to control excessive water production. However, PPG has limited success in treating opening features because the particles can be flushed readily during post-water flooding. We have developed a novel micro-sized Re-crosslinkable PPG (micro-RPPG) to solve the problem. The microgel can re-crosslink to form a bulk gel, avoiding being washed out easily. This paper evaluates the novel microgels' transport and plugging performance through super-permeable channels. Micro-RPPG was synthesized and evaluated for this study. Its storage moduli after fully swelling are approximately 82 Pa. The microgel characterization, self-healing process, transportation behavior, and …
Laboratory Investigation Of Regained Rock Permeability Using High Viscosity Friction Reducer In Comparison To Linear Guar Fracture Fluids,
2023
Missouri University of Science and Technology
Laboratory Investigation Of Regained Rock Permeability Using High Viscosity Friction Reducer In Comparison To Linear Guar Fracture Fluids, Ghith Biheri, Abdulmohsin Imqam
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Hydraulic fracturing is a method employed for extracting oil and gas from unconventional reservoirs by pumping a mixture of water, sand, and additives into the reservoirs to fracture oil formations. A high viscosity friction reducer (HVFR) based on polyacrylamide is a popular chemical that has been employed recently during hydraulic fracturing treatments to help transport proppant and to reduce friction. However, the use of HVFRs at high concentrations, especially in regions with high concentration levels of total dissolved solids (TDS), has raised concerns over the possibility of formation damage. In this research, a new type of HVFR was investigated for …
The Influence Of Tropical Atlantic Sea-Surface Temperatures And The North Atlantic Subtropical High During The Maya Droughts,
2023
Missouri University of Science and Technology
The Influence Of Tropical Atlantic Sea-Surface Temperatures And The North Atlantic Subtropical High During The Maya Droughts, Derek K. Gibson, Jonathan Obrist-Farner, Brooke A. Birkett, Jason H. Curtis, Melissa A. Berke, Peter M.J. Douglas, Prudence M. Rice, Jeremy Maurer
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The frequency and duration of Late-Holocene hydrologic extremes in northern Guatemala were investigated using multiple sedimentological and geochemical proxies preserved in a sediment core collected from Lake Petén Itzá. A general trend of increasing aridity in the Maya Lowlands during the past 2000 years was punctuated by several multidecadal- to centennial-scale drought events recorded in the Petén Itzá sediments. In particular, the period spanning the Maya Terminal Classic Period and the Medieval Climate Anomaly (MCA), between 800 and 1300 CE, was marked by several extreme droughts and included the driest conditions of the past 2000 years between 950 and 1100 …
Development Of Polymeric Sorbents As Reusable Filtration Systems For Remediation Of Pfas Contaminated Water,
2023
University of Kentucky
Development Of Polymeric Sorbents As Reusable Filtration Systems For Remediation Of Pfas Contaminated Water, E. Molly Frazar
Theses and Dissertations--Chemical and Materials Engineering
Decades of use of per- and polyfluoroalkyl substances (PFAS) in a multitude of consumer and industry-based products have led to a devastating amount of soil and water contamination. Although these chemicals and compounds possess advantageous qualities – such as that of PFAS in the role of fire-fighting foams that have no doubt saved countless lives and homes, we must take responsibility for the anthropogenic hazards that threaten our global health. This entails being able to cost-effectively remediate problems created in the past from overuse of toxic substances that could negatively impact our future, and in this case, the future of …
Mechanical And Adhesive Properties Of Supramolecular, Mussel-Inspired Hydrogels,
2023
University of Kentucky
Mechanical And Adhesive Properties Of Supramolecular, Mussel-Inspired Hydrogels, Daniel Darby
Theses and Dissertations--Chemical and Materials Engineering
The exceptional mechanical and adhesive properties of mussel byssal threads come from supramolecular interactions of ligands found in the proteins comprising them. Ligands can form hydrophobic interactions, π-π stacking interactions, and hydrogen bonds, but the strongest supramolecular interaction they demonstrate is metal-ligand coordination. Specifically, Histidine (His-) and nitrodopamine (nDOPA) ligands coordinate to metals in a bidentate fashion and take on tris-, bis-, and mono- modalities (3, 2, or 1 ligand per ion, respectively). The distribution of these modalities is controlled by equilibrium thermodynamics. These same ligands can be used as crosslinks in supramolecular hydrogel networks. Supramolecular hydrogel networks are dissipative, …
Molecular Understanding Of Zwitterions And Quantum Computing For Sustainability,
2023
University of Kentucky
Molecular Understanding Of Zwitterions And Quantum Computing For Sustainability, Manh Tien Nguyen
Theses and Dissertations--Chemical and Materials Engineering
The sustainable development of society needs sustainable energy solutions and the mitigation of greenhouse gas emissions. One key subject in this area is the development of safe and efficient ion-based batteries. Moreover, CO2 capture is a crucial pathway in mitigating emissions from the combustion of fossil fuels. Ongoing efforts are to improve both technologies' safety and efficiency. This thesis presents our efforts to conduct computational research on understanding advanced zwitterionic electrolytes and CO2 capture. Chapters 2-4 illustrate the computational research to understand ionic solvation in zwitterionic electrolytes. Solid-state electrolytes are essential for safer batteries. While solid polymer electrolytes …
Developing And Modeling Tunable Nanofiltration And Functionalized Membranes For The Separation Of Organics And Inorganics From Water: Per- And Polyfluoroalkyl Substances, Lanthanides, And More,
2023
University of Kentucky
Developing And Modeling Tunable Nanofiltration And Functionalized Membranes For The Separation Of Organics And Inorganics From Water: Per- And Polyfluoroalkyl Substances, Lanthanides, And More, Francisco Cecil Leniz-Pizarro
Theses and Dissertations--Chemical and Materials Engineering
In a world where clean water predictability is challenged by both global warming and the contamination of our natural resources, it is our responsibility to advance water separation technologies into more efficient processes and to lessen their environmental footprint. Pore and surface functionalization of membranes can enhance the separation of ions from water and even help overcome intrinsic challenges that some current separation technologies possess. If we begin with a complete fundamental understanding of the nanoscale interactions that occur in the process of separating ions from water, then we can engineer new functionalized composite membranes to provide alternative processes keeping …
Leveraging Cell-Substrate Adhesion And Cell Migratory Properties In Skeletal Muscle Constructs And Cancer Metastasis Assays,
2023
University of Kentucky
Leveraging Cell-Substrate Adhesion And Cell Migratory Properties In Skeletal Muscle Constructs And Cancer Metastasis Assays, Lauren E. Mehanna
Theses and Dissertations--Chemical and Materials Engineering
Volumetric muscle loss (VML) remains one of the few skeletal muscle injuries without a reliable and repeatable treatment. In large volume muscle injuries, muscle fibers as well as the surrounding connective tissue are damaged, preventing therapeutic muscle stem cells, called myogenic progenitor cells (MPCs), from reaching the injury site and initiating repair. There is a clinical need to rapidly fabricate in vitro muscle tissue constructs that mimic the native tissue organization, with aligned myotubes, for insertion and integration at the patient’s injury site. In this dissertation, we utilize the MPC’s natural propensity to close gaps across an injury site to …
Thermal Analysis Of Thermal Shield For Pip-Ii Ssr1 Cryomodule,
2023
Northern Illinois University
Thermal Analysis Of Thermal Shield For Pip-Ii Ssr1 Cryomodule, Victor Aguado Rodriguez
Graduate Research Theses & Dissertations
Fermilab's PIP-II project plans to enhance the onsite accelerator into the world's most intense neutrino beam, bringing Fermilab into the next generation of particle accelerators. The five different types of cryomodules are vital parts of the PIP-II project and each requires numerous engineering analyses to prove operation. For example, the thermal shield of the Single Spoke Resonator-1 (SSR1) cryomodule required a thermal analysis to ensure the design was operating as intended before fabrication commenced. The thermal shield is cooled by the supercritical helium inside of the extrusion and must remain between 45 and 80 Kelvin. The main purpose of the …
Insights To Surfactant Huff-Puff Design In Carbonate Reservoirs Based On Machine Learning Modeling,
2023
Missouri University of Science and Technology
Insights To Surfactant Huff-Puff Design In Carbonate Reservoirs Based On Machine Learning Modeling, Ya Yao, Yue Qiu, Yue Cui, Mingzhen Wei, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Surfactants could react with adsorbates on carbonate rock surface to alter wettability from oil-wetness to water-wetness, which is effective to enhance oil recovery. Surfactant huff-puff treatment is mostly applied for this purpose and the resulting surfactant performance is the outcome of complex interfacial processes. Currently, the effect of important parameters on surfactant performance is not completely reported and the contribution of each parameter to surfactant performance is hard to be quantified. Traditional methods to optimize surfactant performance are time-consuming and show strong dependency on extensive experiments. in this paper, we address these problems from machine learning (ML) perspectives. Several ML …
Coating Compositions And Methods For Using The Same,
2023
Missouri University of Science and Technology
Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn C. Morrison
Patents
Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO2.
Bioinspired Redox Active Pyrogallol For Aqueous Ion Separations,
2023
University of New Hampshire, Durham
Bioinspired Redox Active Pyrogallol For Aqueous Ion Separations, Matt Libby
Honors Theses and Capstones
No abstract provided.
Artifacts In Localised Multivariate Uniform Conditioning: A Case Study,
2023
Edith Cowan University
Artifacts In Localised Multivariate Uniform Conditioning: A Case Study, Oscar Rondon, Hassan Talebi
Research outputs 2022 to 2026
Localised Multivariate Uniform Conditioning (LMUC) is a technique designed for spatially locating Selective Mining Unit (SMU) grades derived using Multivariate Uniform Conditioning (MUC) for the assessment of recoverable resources. LMUC has the advantage of producing SMU estimates conforming to the MUC panel-specific grade-tonnage curves while preserving the spatial grade distribution at the selective mining level. However, LMUC results have two severe artifacts. This paper documents both artifacts using four grades from a large nickel–cobalt laterite deposit in Western Australia.
The Effect Of Process Parameters On The Properties Of Elastic Melt Blown Nonwovens: Air Pressure And Dcd,
2023
College of Textiles and Clothing, Qingdao University, Qingdao, China
The Effect Of Process Parameters On The Properties Of Elastic Melt Blown Nonwovens: Air Pressure And Dcd, Li Change, Yanfen Zhou, Stephen Jerrams, Jianwei Ma, Shaojuan Chen
Articles
An elastic masterbatch and elastic melt blown nonwovens are prepared based successively on styrene-ethylene/butylene-styrene (SEBS) and polypropylene (PP) blend. The phase separation morphology, rheological properties and crystal structure of the elastic masterbatch are investigated. The results show that a compatible and stable structure is obtained in molten SEBS and PP blend with excellent mobility in the temperature range of 210–230C. The crystallization of PP slows down resulting in a finer structure due to the restriction of the SEBS network structure with rarely change of crystalline structure. The relationship between process parameters and properties of the elastic nonwoven is also studied …
Comprehensive Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For The Water Management Of Reservoir With Concentrated Divalent Ions,
2023
Missouri University of Science and Technology
Comprehensive Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For The Water Management Of Reservoir With Concentrated Divalent Ions, Tao Song, Mohamed Ahdaya, Zhanmiao Zhai, Thomas P. Schuman, Baojun Bai
Chemistry Faculty Research & Creative Works
As one of the most widely used technology to ameliorate the reservoir's heterogeneity, polymer gels have been applied for more than 60 years. However, how to plug fractured reservoirs with significant abnormal features, high temperature and high salinity, especially the divalent cations, is still a challenging target. This work systematically evaluated a novel salt-resistant re-crosslinkable preformed particle gel (SR-RPPG) designed for fractured reservoirs with excellent salt resistance (up to 5 % CaCl2). We evaluated the swelling kinetics, thermal stability and plugging efficiency of this SR-RPPG. We assessed the swelling kinetic and re-crosslinking behavior of the SR-RPPG through the …
Re-Assembling Polymer Particle Package For Conformance Control And Fluid Loss Control,
2023
Missouri University of Science and Technology
Re-Assembling Polymer Particle Package For Conformance Control And Fluid Loss Control, Jingyang Pu, Baojun Bai, Thomas P. Schuman
Patents
This invention is broadly concerned with compositions and processes for oilfield applications. More specifically, this invention relates to novel polymer constructed packages that, when pumped into a petroleum well, provide tunable characteristics of transformation and delayed self-assembly with each other under reservoir conditions to yield strong, elastic, bulk gel materials. The compositions comprise a polymer, assembling agents, and optional additives used for the re-assembly stage are uniformly-distributed within the initial gel particles. The polymer particle packages absorb water and swell upon exposure to water, thus exposing the "assembling agents" that enable re-assembly. Both swelling and re-assembly are proportionally controlled via …
Enhanced Emulsion Liquid Membranes For Extraction Of Pollutants From Water,
2023
Missouri University of Science and Technology
Enhanced Emulsion Liquid Membranes For Extraction Of Pollutants From Water, Muthanna Al-Dahhan, Qusay Al-Obaidi
Patents
Described herein are novel emulsion liquid membranes useful for extracting pollutants from industrial wastewater and water. The emulsion liquid membranes include, in various phases, at least one of nanoparticles, an ionic liquid, and combinations of nanoparticles and ionic liquids. Use of the present emulsion liquid membranes enhances the separation and the stability of the ELM method for pollutant extraction and recovery from wastewater and water.
3d Printed Zeolite Monoliths For Co2 Capture,
2023
Missouri University of Science and Technology
3d Printed Zeolite Monoliths For Co2 Capture, Fateme Rezaei, Harshul V. Thakkar
Patents
Carbon dioxide (CO2 ) capture materials comprising one or more 3D-printed zeolite monoliths for the capture and or removal of CO2 from air or gases in enclosed compartments, including gases or mixtures of gases having less than about 5% CO2 . Methods for preparing 3D-printed zeolite monoliths useful as CO2 capture materials and filters, as well as methods of removing CO2 from a gas or mixture of gases in an enclosed compartment using 3D-printed zeolite monoliths are provided.
