Biomedical Engineering and Bioengineering Commons^™

Nonlinear Analytical Models Of The Seismically Isolated ``Frame-Boiler'' System With Cantilever-Type Hysteresis Dampers, Aleksandr Mikhailovich Anushchenko, Dmitrii Evgenievich Bondarev, Aleksandr Yurievich Schukin

Journal of Sustainable Construction Materials and Technologies

This study shows results of development of the ``frame-boiler'' system with hysteresis dampers analytical model. Hysteresis dampers are used as boiler antiseismic bracing. It is noted that simplified analytical models are necessary at the stage of preliminary iterative calculations, when a CAE-modeling is impractical due to significant time costs. The authors have proposed 2 options of analytical models: 2-mass model and 3-mass model. The differential equations of motion for each model are written below. The results of the calculation for seismic impacts are compared with the finite element model. It is shown that 3-mass model gives good match of results …

Advancing Sustainable Structural Solutions: Hemp Fiber-Reinforced Polymer (Hfrp) Reinforcement Bars For Concrete Applications Through Material Selection, Simulation, And Pathways For Future Development, Thomas Cadenazzi, Busra Keles

Journal of Sustainable Construction Materials and Technologies

This paper investigates innovative Hemp Fiber-Reinforced Polymer (HFRP) rebars as a sustainable alternative to conventional Carbon Steel (CS) and Glass Fiber-Reinforced Polymer (GFRP) rebars used as reinforcement in concrete structures. The feasibility of HFRP rebars is assessed, focusing on mechanical properties and sustainability advantages. A virtual tensile test on a modeled M19 HFRP rebar, conducted using Autodesk's Fusion 360, demonstrates tensile strength comparable to CS 235 and greater environmental sustainability than GFRP, despite a slight reduction in stiffness. The study also considers the potential of graphene fiber integration to enhance mechanical properties, underscoring HFRP's adaptability. Findings suggest that HFRP rebars, …

Analysis Of Modifications To An Outdoor Field-Scale Rotating Algal Biofilm Reactor With A Focus On Biomass Productivity And Power Usage, Davis R. Haag, Phillip E. Heck, Ronald C. Sims

Biological Engineering Student Research

Filtrate from dewatering anaerobically digested biosolids is a side-stream of wastewater treatment that contains high concentrations of nitrogen and phosphorus compounds that can serve as nutrients for cultivating microalgae biomass as biofilms for bioproduct production at Water Resource Recovery Facilities (WRRFs). One system used to cultivate attached microalgae biofilms is the rotating algal biofilm reactor (RABR). A pilot RABR with 72 m² growth surface area, 11.5 m² footprint area, and a liquid volume of 11,500 L was operated in an outdoor environment at the largest WRRF in Utah, U.S.A, the Central Valley Water Reclamation Facility (CVWRF). The configuration …

Bioresources And Bioproducts: A New Open Access Journal, Ronald C. Sims

Biological Engineering Faculty Publications

Greetings to the bioresource and bioproducts community! I will serve as the Editor-in-Chief to collaborate with you as we promote the aims and scope of this new MDPI journal [1], with the help of its distinguished Editorial Board, by publishing Special Issues, Topics, Topical Collections, and Editorials, and by providing high-impact scholarship through the outstanding published work of each of our contributors.

Comparative Analysis Of Life Cycle Assessment Of Traditional And Contemporary Timber Buildings, Sadık Akşar, Gökçe Tuna

Journal of Sustainable Construction Materials and Technologies

Wood has long been used as a primary building material, but with the Industrial Revolution and the spread of multi-story structures, its structural limitations became evident. In the 21st century, engineered timber products have reintroduced wood as a sustainable alternative, offering advantages such as lightness, rapid assembly, and recyclability. At the same time, buildings are responsible for significant environmental impacts, making assessment methods essential. Life Cycle Assessment (LCA) is one of the most widely used tools for evaluating these impacts across all stages of a building’s life cycle. This study applies LCA to timber construction systems, focusing on both traditional …

Sustainable Paving Block Development: Utilizing Rejected Coal As Filler And Assessing Its Impact On Paving Block’S Properties, Siti Nikmatin, Allen Kurniawan, Heriansyah Putra, Rima Fitria Adiati, Riawan Ma’Ruf, Dwi Arso Yedi Irwanto

Journal of Sustainable Construction Materials and Technologies

This study investigated the potential use of rejected coal as a fine aggregate filler in paving block production. Comprehensive characterization of the rejected coal was conducted, including toxicity, physical, chemical, and mineralogical analyses of the coal. The results showed that the rejected coal met environmental safety standards (TCLP) and had suitable properties as an aggregate. Paving blocks were produced by incorporating different proportions of rejected coal fillers and were tested for compressive strength, water absorption, and density. The optimal mix with 35% rejected coal filler as a replacement of stone ash achieved a compressive strength of 14.61 MPa, water absorption …

Numerical Comparative Study Of The Thermal Performance And Load-Bearing Capacity Of Hollow Clay Bricks Used In Construction In Libya, Osama Lawej, Mahmoud Ahmed, Ismael Ehtiwesh

Journal of Sustainable Construction Materials and Technologies

The optimization of structural and thermal performance in building components is a key challenge in sustainable construction, particularly in hot climate regions like Libya. Hollow clay bricks are widely used due to their local availability and affordability; however, their internal geometry is often not optimized for thermal resistance or mechanical integrity. This study addresses this gap by numerically investigating the effect of cavity geometry on the load-bearing capacity and thermal insulation performance of hollow clay bricks. Three configurations were analyzed, including two commercial designs from the Libyan market and a newly proposed arched cavity design. Finite Element Method (FEM) simulations …

Developing A Modular Circular Wall Over-Clad System For Facade Thermal Upgrade In Deep Energy Retrofit, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The EU has implemented several policy and legislative initiatives aimed at decarbonisation and circularity transition of the Built Environment including a strategy for large scale renovation of the building / housing stock. Modularised construction solutions are argued to be a potential acceleration pathway toward this objective. Yet there remains issues and challenges in implementing such strategies in a complex and heterogeneous stock and sector. This research investigates this decarbonisation pathway, examining the feasibility and potential of applying a modularised construction over-clad system, based on advanced circularity, in the deep energy retrofit of social housing. The research is based on a …

Smart Dressings Accelerating Wound Healing With Tranexamic Acid-Infused Aligned Electrospun Nanofibers: In Vitro And In Vivo Assessments, Samar A. Salim, Abdullah Elbadry, Eman Gomaa, Mennatullah Faisal, Elbadawy A. Kamoun

Nanotechnology Research Centre

The development of advanced wound dressings capable of accelerating healing and achieving effective hemostasis remains a critical challenge in managing traumatic and surgical wounds. This study reports the fabrication and comprehensive evaluation of a novel multilayered, sandwich-structured nanofiber scaffold composed of Tranexamic acid (TXA), chitosan (CS), polyvinyl alcohol (PVA), L-arginine, and polylactic acid (PLA) for biodegradable wound dressing applications. Using sequential electrospinning, a four-layered scaffold was developed as a smart wound dressing, comprising an immediate-release TXA-CS-PVA layer for rapid clotting, a hydrophobic PLA barrier layer for protection, a sustained-release L-arginine-PVA layer to promote tissue regeneration, and a final PLA protective …

Coumarin/Nitrogen-Bearing Heterocyclic Hybridloaded Electrospun Pmma/Pvp Nanofibrous Scaffolds For Accelerating Topical Wound Healing Rates: Synthesis And In Vitro Bio-Evaluation, Samar A. Salim, Mohamed Ali, Tasneem Abed, El Badawy Kamoun

Nanotechnology Research Centre

Coumarin-nitrogen heterocyclic compounds (e.g. quinoline, acridine, and phthalazine) were synthesized by facile reactions and elucidated by FTIR, 1H, and 13C-NMR analyses, which showed consistency with the expected structures. Coumarin-quinoline (drug A)- and coumarin-acridine (drug B)-loaded electrospun PMMA/PVP nanofibrous scaffolds were fabricated using electrospinning techniques. Results showed a successful PMMA/PVP blend, which formed the matrix that was used as the main scaffold for drug loading/release. The drugs (A and B) were encapsulated within the matrix as verified by IR and SEM results. Bio-evaluation through cytotoxicity and anticancer screening was conducted using the MTT assay against lung fibroblast (Wi-38), colon carcinoma (Caco-2), …

Development Of Gelma-Based Hydrogel Scaffolds With Tunable Mechanical Properties For Applications In Peripheral Nerve Regeneration, Kylie M. Schmitz, Tanner L. Larson, Michael W. Borovich, Xianfang Wu, Geyou Ao, Megan Jack, Liqun Ning

Chemical & Biomedical Engineering Faculty Publications

Peripheral nerve injuries (PNIs) have a significant impact on the quality of life for patients suffering from trauma or disease. In injuries with critical nerve gaps, PN regeneration requires tissue scaffolds with appropriate physiological properties that promote cell growth and functions. Hydrogel scaffolds represent a promising platform for engineering soft tissue constructs that meet key physiological requirements. Nonetheless, ongoing innovation remains essential, as current designs continue to fall short of replicating the functional performance of autografts in bridging critical-sized nerve defects. In this study, gelatin methacrylate (gelMA)-based hydrogels are evaluated to fully characterize their pore structure, compressive stiffness, viscoelasticity, and …

Optimizing Beer Fermentation Through Intelligent Control, Azizbek Nodirbekovich Yusupbekov, Mirjalol Yusupov

Chemical Technology, Control and Management

This paper presents an intelligent control approach for optimizing the beer fermentation process using fuzzy logic and adaptive neuro-fuzzy inference systems. By incorporating multivariable inputs—temperature error and pH deviation—the proposed system effectively handles the nonlinear dynamics and biological variability inherent in fermentation. Simulation results demonstrate improved control accuracy, responsiveness, and robustness compared to conventional methods, making the approach suitable for integration in modern brewery automation systems.

Novel Percutaneous Repair Of Femoral Pseudoaneurysms Using Perclose Proglide™: A Case Series, Ryan Mancoll, Emily Burnett, Nicholas Bandy, Benjamin Samberg, Thomas Cook, Jacob Hoffman, Christopher Murter, Matthew Rossi, David Dexter, Hosam El Sayed, Animesh Rathore Md

Cardiovascular Research Symposium

BACKGROUND - This case series details the novel use of the Perclose ProGlide closure device to successfully repair three separate cases of iatrogenic femoral pseudoaneurysms (PSAs) without attempting other modalities first. Conventional treatment methods of ultrasound-guided compression, duplex-directed thrombin injection (DDTI), or open surgical repair were contraindicated in these patients due to unique anatomy or advanced comorbidities.

METHODS – Details were gathered via a retrospective chart review.

RESULTS - In the first case, a 73-year-old female had an access site PSA off the superficial femoral artery (SFA) with concomitant arteriovenous fistula (AVF) and advanced cardiac disease. The ProGlide device was …

A Pilot Study On Tissue Deformation Using An Integrated Sensor–Actuator Blood Collection Setup In Aquaculture (Salmo Salar), Ishrak Siddiquee, Md Ebne Al Ashad, Ahmed Hasnain Jalal

Electrical and Computer Engineering Faculty Publications

This pilot study presents a sensor–actuator setup designed to evaluate tissue deformation in Atlantic Salmon (Salmo salar) during needle insertion. The system integrates three types of low-cost, commercially available force sensors to capture force profiles and identify biomechanical events associated with tissue layer transitions. Controlled insertions were performed on a deceased specimen, and the resulting force data were analyzed to quantify insertion dynamics and estimate tissue deformation. A simulation model based on the recorded force values was developed to calculate stress distribution and deformation, which ranged from 0.001 µm to 8.4 µm and from 0.3 N/m2 to 4.9 N/m2, respectively. …

Progressive Insights Into 3d Bioprinting For Corneal Tissue Restoration, Ilayda Namli, Deepak Gupta, Yogendra Pratap Singh, Pallab Datta, Muhammad Rizwan, Mehmet Baykara, Ibrahim T. Ozbolat

Michigan Tech Publications

The complex architecture of the cornea, characterized by specifically organized collagen fibrils and distinct cellular layers, poses significant challenges for traditional tissue engineering strategies to replicate its native function. 3D Bioprinting offers a promising solution by enabling the precise, layer-by-layer fabrication of corneal tissues, closely mimicking the essential characteristics needed for vision restoration and long-term graft success. This Review critically examines the key biomechanical, optical, and structural attributes of the cornea necessary for its effective engineering and accurate 3D bioprinting. It provides a comprehensive overview of different 3D bioprinting modalities utilized for corneal tissue engineering and offers insights into potential …

Single-Molecule Orientation And Localization Microscopy, Sophie Brasselet, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Single-molecule localization microscopy (SMLM) offers enhanced spatial resolution in optical microscopy, providing detailed insights into the spatial organization of proteins in cells at the nanoscale. Over the past decade, SMLM has progressively incorporated the capability to retrieve the orientations of single molecules using their polarized dipolar emission pattern. Here we explore recent advancements in single-molecule orientation and localization microscopy (SMOLM), which yields super-resolved images of molecular three-dimensional (3D) orientations, wobble and 3D positions. This advancement opens possibilities to explore the nanoscale organization and conformation of biological molecules as well as to monitor and design local 3D optical fields in nanophotonics. …

Comprehensive Review Of In Vitro Approaches For Environmental Heavy Metal Exposure, Manas Warke, Madeline English, Camila Padilla, Lexie Gasco, Wendy Leisner, Rupali Datta, Smitha Rao

Michigan Tech Publications

Heavy metals are ubiquitous environmental pollutants, contaminating air, soil, and water via the erosion of natural deposits, as well as originating from anthropogenic sources, such as agriculture, industries, transportation, and landfills. The increasing utilization of heavy metals over the years, combined with the persistent nature of metals in the environment poses a direct threat to human and environment health. Although regulatory limits have been established for toxic metals, assessing the associated health risks using real-life exposure scenarios remains challenging. In this review, we summarize the development and use of in vitro models based two- and three-dimensional cell culture systems, focusing …

Mitigating Melanin-Induced Bias In Pulse Oximetry: Optical, Algorithmic, Engineering, Hardware And Modeling Tools, Mckenzie Bradley, Sydnee Barrett, Ty Mckelvey, Jeremiah Carpenter, Delphine Dean

Publications

Melanin, the primary determinant of skin pigmentation, absorbs light at wavelengths that can have significant impact on the accuracy of pulse oximetry and other optical biosensing methods. This narrative review examines key factors influencing melanin-dependent pulse oximetry inaccuracies, including optical interference in transmission and reflectance modes. These inaccuracies further highlight the need for use of standardized skin tone metrics in device testing and design such as the Monk Skin Tone scale and Individual Typology Angle for performance stratification. There are several approaches in development that hope to address the errors in pulse oximetry measurements on melanin-rich skin. These include algorithmic …

Low-Cost Cutaneous Protoporphyrin Ix (Ppix) Detection (Cpd) Device For Follow-Up Monitoring Of Patients After Photodynamic Therapy, Md Asaduzzaman Rasel

Graduate Masters Theses

Background: Photodynamic Therapy (PDT) utilizes specific wavelengths of light to activate photosensitizing chemical compounds, known as photosensitizers, which induce the generation of cytotoxic reactive oxygen species (ROS) for the targeted destruction of cancer cells. Among various photosensitizers for PDT, Protoporphyrin IX (PpIX) is widely employed in oncology and dermatology due to its natural in situ generation via the metabolic conversion of 5- aminolevulinic acid (ALA), a non-phototoxic prodrug. Systemic administration of ALA after 3-6 hr drug delay leads to peak PpIX accumulation in tissues, facilitating therapeutic and diagnostic applications. However, PpIX can persist in the skin for 24–48 hours post-treatment, …

Design And Development Of A Standalone Digital Holographic Microscope Employing Phase-Driven Reconstruction And Classification For Biomedical Imaging And Optical Diagnostics, Charlotte Kyeremah

Graduate Doctoral Dissertations

Access to advanced biomedical imaging technologies remains a significant challenge in resource-limited settings, especially for early disease detection and monitoring of diseases such as malaria, HIV, and other blood-borne diseases. Although point-of-care (POC) devices have gained popularity in global health, many rely on antibody-based tests, lateral flow strips, or optical readouts that often lack quantitative capabilities, sensitivity to early infections, or versatility in different diagnostic targets. In addition, these systems are typically dependent on disposable reagents or manual interpretation, which limits their effectiveness in remote areas. Digital Holographic Microscopy (DHM) presents a promising alternative as a label-free imaging method capable …