Fluid Dynamics Commons^™

Optimisation Of Retrofit Wall Insulation: An Irish Case Study, Rakshit D. Muddu, D M. Gowda, Anthony James Robinson, Aimee Byrne

Articles

Ireland has one of the highest rates of emissions per capita in the world and its residential sector is responsible for approximately 10% of total national CO2 emissions. Therefore, reducing the CO2 emissions in this sector will play a decisive role in achieving EU targets of reducing emissions by 40% by 2030. To better inform decisions regarding retrofit of the existing building stock, this study proposes Optimum Insulation Thicknesses (OIT) for typical walls in 25 regions in Ireland. The calculation of OIT includes annual heat energy expenditure, CO2 emissions, and material payback period. The approach taken is based on Heating …

Numerical Simulations Of Capsule Deformation Using A Dual Time-Stepping Lattice Boltzmann Method, Charles Armstrong, Yan Peng

Mathematics & Statistics Faculty Publications

In this work a quasisteady, dual time-stepping lattice Boltzmann method is proposed for simulation of capsule deformation. At each time step the steady-state lattice Boltzmann equation is solved using the full approximation storage multigrid scheme for nonlinear equations. The capsule membrane is modeled as an infinitely thin shell suspended in an ambient fluid domain with the fluid structure interaction computed using the immersed boundary method. A finite element method is used to compute the elastic forces exerted by the capsule membrane. Results for a wide range of parameters and initial configurations are presented. The proposed method is found to reduce …

Epitaxial Growth Of Semi-Polar (11-22) Gallium Nitride For Uv Photosensing Application, Abdullah Haaziq Ahmad Makinudin

Student Works (2020-2029)

Semi-polar (11-22) gallium nitride (GaN) epilayers have attracted numerous interests in GaN based technology as it possess significant advantages over its polar (c-plane) counterparts such as low to none spontaneous and piezoelectric polarization which is known to impair the device performance. However, growth along semi-polar (11-22) orientation has been known to exhibit numerous defect densities such as dislocations and stacking faults (SFs). In order to acquire high quality semi-polar (11-22) GaN epilayers, various growth optimizations must be employed. In this work, the semi-polar (11-22) GaN epilayers were grown on planar m-plane sapphire substrate with the use of a 2-inch capability …

Modeling Fluid Phenomena In The Context Of The Constrained Vapor Bubble System, James Barrett

Mathematics Theses and Dissertations

This thesis focuses on the fluid phenomena observed within what is known as the constrained vapor bubble system. The constrained vapor bubble system is a closed system consisting of a quartz cuvette partially filled with liquid and used as a coolant device. Heat is applied to the heater end which causes the liquid to evaporate and condense on the cooled end of the cuvette. Liquid travels back to the heated end via capillary flow in the corners. A pure vapor bubble is formed in the center of the cuvette giving rise to the name of the experiment. The constrained vapor …

Modeling Residence Time Distribution Of Chromatographic Perfusion Resin For Large Biopharmaceutical Molecules: A Computational Fluid Dynamic Study, Kevin Vehar

KGI Theses and Dissertations

The need for production processes of large biotherapeutic particles, such as virus-based particles and extracellular vesicles, has risen due to increased demand in the development of vaccinations, gene therapies, and cancer treatments. Liquid chromatography plays a significant role in the purification process and is routinely used with therapeutic protein production. However, performance with larger macromolecules is often inconsistent, and parameter estimation for process development can be extremely time- and resource-intensive. This thesis aimed to utilize advances in computational fluid dynamic (CFD) modeling to generate a first-principle model of the chromatographic process while minimizing model parameter estimation's physical resource demand. Specifically, …

Thermo-Fluid Characterizations Of The Powder-Bed Fusion Additive Manufacturing Processes Using Laser And Electron Beam, M Shafiqur Rahman

LSU New Orleans Theses and Dissertations

The powder-bed fusion (PBF) process is a subdivision of Additive Manufacturing (AM) technology where a heat source at a controlled speed selectively fuses regions of a powder-bed material to form three-dimensional (3-D) parts. Two of the most effective PBF processes are selective laser melting (SLM) and electron beam additive manufacturing (EBAM), which can fabricate full-density metallic parts in a layer-by-layer fashion. In this study, thermal behavior and melt-pool dynamics in the PBF process are investigated by developing 3-D multiphysics-based thermo-fluid models for both SLM and EBAM, containing Ti-6Al-4V alloy as a powder-bed material. The laser and electron beams are modeled …

Retention Of Rising Oil Droplets In Density Stratification, Tracy L. Mandel, De Zhen Zhou, Lindsay Waldrop, Maxime Theillard, Dustin Kleckner, Shilpa Khatri

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

In this study, we present results from experiments on the retention of single oil droplets rising through a two-layer density stratification, with the goal of quantifying and parametrizing the impact of stratification on timescales that describe the delay in rising. These experiments confirm the significant slowdown observed in past literature of settling and rising particles and droplets in stratification, and these are the first experiments to study single liquid droplets as opposed to solid particles or bubbles. By tracking the motion of the droplets as they rise through a stratified fluid, we identify two new timescales which quantitatively describe this …

Flow Patterns, Velocity Distributions And Mixing Time In Stirred Tank Reactor Under A Range Of Operating Conditions, Nor Haslina Abdullah

Student Works (2020-2029)

The present work employed a two-dimensional Particle Imaging Velocimetry (PIV) technique to determine the flow patterns and velocity distributions of a down-pumping pitched-blade turbine (4PB) and a Rushton turbine (RT) in a flat-bottom fully baffled stirred vessel (T=0.155m) using distilled water and glycerin as liquids. Fluid velocities increased as the impeller speed increased from 50rpm to 300rpm for both fluids and the RT impeller reached a maximum value of velocity of 1.42m/s at the blade tip. The 4PB had higher velocity compared to RT in glycerin, but RT had higher velocity than 4PB in distilled water. In water, radial flow …

Understanding Of Aerosol Transmission Of Covid 19 In Indoor Environments, Adama Barro, Cathal O'Toole, Jacob S. Lopez, Matthew Quinones, Sherene Moore

Publications and Research

Our reason for discussing severe acute respiratory syndrome corona virus 2 (SARS-CoV-2) or 2019 novel corona virus (Covid-19), is to understand its aerosol transmission characteristics in indoor spaces and to mitigate further spread of this disease by designing a new HVAC system. The problem that we are tackling is the spread of covid-19 droplets through aerosol transmission by looking at potential engineering solutions to the existing HVAC systems. The purpose is to eradicate the spread of the COVID-19 by testing indoor spaces in an effort to understand the effectiveness of ventilation controls. We believe that scientists and engineers have not …

Effect Of Porosity On Unsteady Mhd Convection Flow Past A Moving Vertical Plate With Ramped Wall Temperature, U. S. Rajput, Mohammad Shareef

Applications and Applied Mathematics: An International Journal (AAM)

The unsteady MHD convective flow of an electrically conducting fluid embedded in a porous medium along moving infinite vertical plate with ramped wall temperature and radiation in a rotating system is investigated here. The fluid taken is incompressible and viscous. The governing PDE’s of the model are solved by using integral transform method. The analytical solutions for the velocity, concentration and temperature are obtained. The expressions for skin friction, rate of mass transfer and heat transfer near the plate are obtained. The effects of various parameters like porosity of the medium, magnetic field, Soret number, thermal radiation, rotation, radiation and …

Heat And Mass Transfer In Micropolar Model For Blood Flow Through A Stenotic Tapered Artery, Moses S. Dada, Funmilola Alamu-Awoniran

Applications and Applied Mathematics: An International Journal (AAM)

Heat and mass transfer in blood flow through a tapered artery with mild stenosis is examined. The blood is considered to be an incompressible, micropolar fluid flowing through a vessel with nonsymmetric axial and symmetric radial axes. The geometry of the model takes into account the shape parameter, tapered angle and height of the stenosis.The variation in the shape parameter is used to describe the changes in the axial shape of the stenosis in the artery. The governing equations for the model, comprising the continuity, momentum, energy, and mass transfer equations are transformed and simplified under the assumption of mild …

Accurate Spectral Algorithms For Solving Variable-Order Fractional Percolation Equations, M. A. Abdelkawy

Applications and Applied Mathematics: An International Journal (AAM)

A high accurate spectral algorithm for one-dimensional variable-order fractional percolation equations (VO-FPEs) is considered.We propose a shifted Legendre Gauss-Lobatto collocation (SL-GLC) method in conjunction with shifted Chebyshev Gauss-Radau collocation (SC-GR-C) method to solve the proposed problem. Firstly, the solution and its space fractional derivatives are expanded as shifted Legendre polynomials series. Then, we determine the expansion coefficients by reducing the VO-FPEs and its conditions to a system of ordinary differential equations (SODEs) in time. The numerical approximation of SODEs is achieved by means of the SC-GR-C method. The under-study’s problem subjected to the Dirichlet or non-local boundary conditions is presented …

Effect Of Induced Magnetic Field On Mixed Convection Flow In A Vertical Channel With Symmetric And Asymmetric Wall Heating Conditions, Hasan N. Zaidi

Applications and Applied Mathematics: An International Journal (AAM)

The present paper concerns the study of the induced magnetic field effect on mixed convection flow of viscous incompressible electrically conducting fluid in a vertical channel with symmetric and asymmetric wall heating conditions with heat generation. A steady, laminar, and fully developed flow is considered. Through the appropriate choice of dimensionless variable, the governing equations are developed and three types of thermal boundary conditions isothermal-isothermal, isoflux-isothermal, and isothermal-isoflux for the left-right wall of the channel have prescribed. The analytical solutions for the velocity field, temperature field, magnetic field, and induced current density have been acquired for three types of thermal …

Numerical Simulations Of Nonlinear Waves And Their Stability: Stokes Waves And Nonlinear Schroedinger Equation, Anastassiya Semenova

Mathematics & Statistics ETDs

The present work offers an investigation of dynamics and stability of nonlinear waves in Hamiltonian systems. The first part of the manuscript discusses the classical problem of water waves on the surface of an ideal fluid in 2D. We demonstrate how to construct the Stokes waves, and how to apply a continuation method to find waves in close vicinity to the limiting Stokes wave. We provide new insight into the stability of the Stokes waves by identifying previously inaccessible branches of instability in the equations of motion for the fluid. We provide numerical evidence that pairs of unstable eigenvalues of …

Atmospheric Measurements With Unmanned Aerial Systems (Uas), Marcelo I. Guzman

Chemistry Faculty Publications

This Special Issue provides the first literature collection focused on the development and implementation of unmanned aircraft systems (UAS) and their integration with sensors for atmospheric measurements on Earth. The research covered in the Special Issue combines chemical, physical, and meteorological measurements performed in field campaigns as well as conceptual and laboratory work. Useful examples for the development of platforms and autonomous systems for environmental studies are provided, which demonstrate how careful the operation of sensors aboard UAS must be to gather information for remote sensing in the atmosphere. The work serves as a key collection of articles to introduce …

A Modelling Study For Smart Pigging Technique For Pipeline Leak Detection, Caitlyn Judith Thiberville

LSU Master's Theses

Although leak incidents continue, a pipeline remains the most reliable mode of transportation within the oil and gas industry. It becomes even more important today because the projection for new pipelines is expected to increase by 1 billion BOE through 2035. In addition, increasing number and length of subsea tiebacks face new challenges in term of data acquisition, monitoring, analysis, and remedial actions. Passive leak-detection methods commonly used in the industry have been successful with some limitations in that they often cannot detect small leaks and seeps. In addition to a thorough review of related topics, this study investigates how …

Developing A Portable, Smartphone-Based Schlieren Imaging System, Grace Riermann, Keith R. Stein

Honors Student Works

Schlieren imaging is a technique for visualizing fluid flows that are characterized by spatial variations in density or refractive index. Because schlieren imaging is commonly performed with expensive equipment in a lab setting, we sought cost efficiency, accessibility, and ease of fabrication by designing a portable, smartphone-based system.

Experimental Study Of Breathers And Rogue Waves Generated By Random Waves Over Non-Uniform Bathymetry, A. Ludu, A. Wang, Z. Zong, L. Zou, Y. Pei

Publications

We present experimental evidence of formation and persistence of localized waves, breathers, and solitons, occurring in a random sea state and uniformly traveling over non-uniform bathymetry. Recent studies suggest connections between breather dynamics and irregular sea states and between extreme wave formation and breathers, random sea states, or non-uniform bathymetry individually. In this paper, we investigate the joint connection between these phenomena, and we found that breathers and deep-water solitons can persist in more complex environments. Three different sets of significant heights have been generated within a Joint North Sea Wave Observation Project wave spectrum, and the wave heights were …

Effects Of Surfactants On The Generation Of Sea Spray During Tropical Cyclones, Breanna L. Vanderplow

All HCAS Student Capstones, Theses, and Dissertations

Despite significant improvement in computational and observational capabilities, predicting intensity and intensification of major tropical cyclones remains a challenge. In 2017 Hurricane Maria intensified to a Category 5 storm within 24 hours, devastating Puerto Rico. In 2019 Hurricane Dorian, predicted to remain tropical storm, unexpectedly intensified into a Category 5 storm and destroyed the Bahamas. The official forecast and computer models were unable to predict rapid intensification of these storms. One possible reason for this is that key physics, including microscale processes at the air-sea interface, are poorly understood and parameterized in existing forecast models.

Under tropical cyclones, the air-sea …

Feasibility Of Electric Field Assisted Clogging Reduction In Cold Gas Spraying Nozzle, Hendric Tronsson

ENGS 88 Honors Thesis (AB Students)

The relatively novel cold spraying process expands its range of applications constantly. In order to continue this trend, this process still has various hurdles that need to be overcome such as clogging. Clogging within the cold gas spraying process causes porous coatings with less material properties and lower durability; a solution is needed in order to reduce the clogging and so expand the cold gas spraying applications. This study aimed to explore the feasibility of using an electric field to reduce clogging. To do so a simplified channel was used to simulate charged particle trajectory shifts under the influence of …