Fluid Dynamics Commons^™

Investigation Of Two-Phase Flow Phenomena In Rotating Paper Dryer To Achieve Effective Heat Transfer With Low Energy Consumption, Hamed Abdul Majeed

LSU New Orleans Theses and Dissertations

The paper industry provides important consumer products comprised of paper, tissue, paper board, and pulping. The papermaking process requires a lot of energy, in the form of steam, to dry the paper web in rotating dryers. As steam condenses inside the dryers by releasing heat to the dryer walls, the condensate is removed using either stationary or rotary siphons. Since the condensate is usually at a saturated state, part of the condensate flashes into vapor during the extraction process and becomes difficult to extract. Thus, additional blow-through steam is used to push the condensate out. Since this blow-through steam is …

Characterization Of Landslide Processes From Radar Remote Sensing And Hydromechanical Modeling, Yuankun Xu

Earth Sciences Theses and Dissertations

Landsides are a natural geomorphic process yet a dangerous hazard which annually causes thousands of casualties and billions of property loss in a global scale. Understanding landslide motion kinematics from early initiation to final deposition is critical for monitoring, assessing, and forecasting landslide movement in order to mitigate their hazards. Landslides occur under diverse environmental settings and appear in variable types; however, all types of landslides can be mechanically attributed to shearing failure at the basal surface due to stress regime shift contributed by internal and/or external forcing. Typical internal factors include soil/rock weathering, whereas typical external triggering forces encompass …

Virtual Prototyping Of Liquid Lithium Divertor Concepts, Brennan Arnold

Macalester Journal of Physics and Astronomy

A tokamak divertor must withstand power deposition in excess of 10 MW/m^2 in steady state and much higher in disruptions, enough to destroy nearly any material. In order to handle this extreme heat, there is some interest in using liquid metal flows to continually renew the divertor surface. In this paper, we examine an idea for a divertor with a porous surface that allows liquid lithium flowing through the divertor to percolate to the plasma facing surface. This idea is complicated by magnetohydrodynamic drag, where the stong magnetic fields in the tokamak cause the lithium to flow too slowly to …

Design And Control Of A Peristaltic Pump To Simulate Left Atrial Pressure In A Conductive Silicone Model, Jeremy Collins

Mechanical Engineering Undergraduate Honors Theses

According to the CDC, atrial fibrillation is responsible for more than 454,000 hospitalizations and approximately 158,000 deaths per year. A common treatment for atrial fibrillation is catheter ablation, a process in which a long flexible tube is guided through the femoral artery and to the source of arrhythmia in the heart, where it measures the electrical potential at various locations and converts problematic heart tissue to scar tissue via ablation. This paper details the design and control of a low-cost ($400) peristaltic pump system using repetitive control to replicate blood pressure in the left atrium in a conductive silicone model …

Complex Fluid Dynamics: Chemo-Hydrodynamics Driven By Autocatalytic Reaction Fronts, Matthew Walter Eskew

Dissertations and Theses

Chemo-hydrodynamics generated from reaction-diffusion-convection processes of autocatalytic chemical systems are extensively studied for their applications in modeling complex systems. Compared to the more extensively studied autocatalytic systems, chlorite-tetrathionate and chlorite-trithionate, the chlorite-thiourea systems is relatively unexplored. Compared to the two previous systems, chlorite-thiourea has more straightforward chemical kinetics. To narrow the gap between chlorite-thiourea and the other systems a combination of experimental study and numerical simulation were employed to quantify this system.

Compared to established literature, experiments were performed at five orders of magnitude lower concentration of indicator, minimizing confounding effects of indicator on hydrodynamic motion. To accurately image the …

Superfluid Swimmers, German Kolmakov, Igor S. Aranson

Publications and Research

The propulsion of living microorganisms ultimately relies on viscous drag for body-fluid interactions. The self-locomotion in superfluids such as ⁴He is deemed impossible due to the apparent lack of viscous resistance. Here, we investigate the self-propulsion of a Janus (two-face) light-absorbing particle suspended in superfluid helium ⁴He (He-II). The particle is energized by the heat flux due to the absorption of light from an external source. We show that a quantum mechanical propulsion force originates due to the transformation of the superfluid to a normal fluid on the heated particle face. The theoretical analysis is supported by the …

Euler, Father Of Haemodynamics, Sylvio R. Bistafa

Euleriana

This article is being published in conjunction with the translation and synopsis of E855. Principia pro motu sanguinis per arterias determinando of 1775 - view the translation and synopsis by clicking here.

Frozen In Time: A Numerical Modeling Approach To The Study Of Ice Bearing Planetesimals Through Carbonaceous Chondrites, Jasmine M. Bayron

Dissertations, Theses, and Capstone Projects

Icy planetesimals are significant objects of study for meteoritics, planetary science, and astrobiology due to their connections to the origins of life and liquid water on Earth. An existing closed system aqueous alteration model was adapted to simulate several scenarios involving early Solar System geologic processes occurring in an icy planetesimal interior. The model described in this work has been developed not only to test the validity of constraints currently thought to apply to CM1 parent bodies, but to directly compare the implications of these constraints for the isotopic composition and the modal mineralogy of carbonaceous chondrites. Isotopic ratios of …

Numerical Reconstruction Of Spalled Particle Trajectories In An Arc-Jet Environment, Raghava S. C. Davuluri, Sean C. C. Bailey, Kaveh A. Tagavi, Alexandre Martin

Mechanical Engineering Faculty Publications

To evaluate the effects of spallation on ablative material, it is necessary to evaluate the mass loss. To do so, a Lagrangian particle trajectory code is used to reconstruct trajectories that match the experimental data for all kinematic parameters. The results from spallation experiments conducted at the NASA HYMETS facility over a wedge sample were used. A data-driven adaptive methodology was used to adapts the ejection parameters until the numerical trajectory matches the experimental data. The preliminary reconstruction results show that the size of the particles seemed to be correlated with the location of the ejection event. The size of …

Electroosmotic Mixing Of Non-Newtonian Fluid In A Microchannel With Obstacles And Zeta Potential Heterogeneity, Lanju Mei, Defu Cui, Jiayue Shen, Diganta Dutta, Willie Brown, Lei Zhang, Ibibia K. Dabipi

Computational Modeling & Simulation Engineering Faculty Publications

This paper investigates the electroosmotic micromixing of non-Newtonian fluid in a microchannel with wall-mounted obstacles and surface potential heterogeneity on the obstacle surface. In the numerical simulation, the full model consisting of the Navier–Stokes equations and the Poisson–Nernst–Plank equations are solved for the electroosmotic fluid field, ion transport, and electric field, and the power law model is used to characterize the rheological behavior of the aqueous solution. The mixing performance is investigated under different parameters, such as electric double layer thickness, flow behavior index, obstacle surface zeta potential, obstacle dimension. Due to the zeta potential heterogeneity at the obstacle surface, …

Compressible Hydrodynamics Of Few Body Optical Vortices, Jasmine M. Andersen

Electronic Theses and Dissertations

The ubiquity of vortices nearly rivals that of the innumerable fluids and spaces in which they live. Not only do they exist in systems such as superfluids, superconductors, optical fields, or cold atomic gases, for example, but they also exist in our atmospheres, oceans, and even in our veins. This makes understanding and accurately predicting the dynamics of vortices in various systems a relevant and meaningful endeavor.

From a typical hydrodynamic perspective, vortices move within a given fluid because of the background fluid density and phase gradients at the vortex location. However, we find that these gradients alone are insufficient …

Electroosmotic Flow Of Viscoelastic Fluid Through A Constriction Microchannel, Jianyu Ji, Shizhi Qian, Zhaohui Liu

Mechanical & Aerospace Engineering Faculty Publications

Electroosmotic flow (EOF) has been widely used in various biochemical microfluidic applications, many of which use viscoelastic non-Newtonian fluid. This study numerically investigates the EOF of viscoelastic fluid through a 10:1 constriction microfluidic channel connecting two reservoirs on either side. The flow is modelled by the Oldroyd-B (OB) model coupled with the Poisson–Boltzmann model. EOF of polyacrylamide (PAA) solution is studied as a function of the PAA concentration and the applied electric field. In contrast to steady EOF of Newtonian fluid, the EOF of PAA solution becomes unstable when the applied electric field (PAA concentration) exceeds a critical value for …

Improving The Temporal Accuracy Of Turbulence Models And Resolving The Implementation Issues Of Fluid Flow Modeling, Kyle J. Schwiebert

Dissertations, Master's Theses and Master's Reports

A sizeable proportion of the work in this thesis focuses on a new turbulence model, dubbed ADC (the approximate deconvolution model with defect correction). The ADC is improved upon using spectral deferred correction, a means of constructing a higher order ODE solver. Since both the ADC and SDC are based on a predictor-corrector approach, SDC is incorporated with essentially no additional computational cost. We will show theoretically and using numerical tests that the new scheme is indeed higher order in time than the original, and that the benefits of defect correction, on which the ADC is based, are preserved.

The …

Modeling And Numerical Simulations Of The Michigan Tech Convection Cloud Chamber, Subin Thomas

Dissertations, Master's Theses and Master's Reports

Understanding atmospheric clouds is essential for human progress, ranging from short-term effects such as when and how much it rains to long-term effects such as how much temperatures would rise due to global climate change. Clouds vary globally and seasonally; also they have length scales ranging from a few nanometers to a few kilometers and timescales from a few nanoseconds to a few weeks. Knowledge gaps in aerosol-cloud-turbulence interactions and a lack of sufficient resolution in observations pose a challenge in understanding cloud systems.

Experimental facilities like the Michigan Tech Cloud Chamber can provide a suitable platform for studying aerosol-cloud …

Five-Wave Resonances In Deep Water Gravity Waves: Integrability, Numerical Simulations And Experiments, Dan Lucas, Marc Perlin, Dian-Yong Liu, Shane Walsh, Rossen Ivanov, Miguel D. Bustamante

Articles

In this work we consider the problem of finding the simplest arrangement of resonant deep water gravity waves in one-dimensional propagation, from three perspectives: Theoretical, numerical and experimental. Theoretically this requires using a normal-form Hamiltonian that focuses on 5-wave resonances. The simplest arrangement is based on a triad of wave vectors K₁ + K₂ = K₃ (satisfying specific ratios) along with their negatives, corresponding to a scenario of encountering wave packets, amenable to experiments and numerical simulations. The normal-form equations for these encountering waves in resonance are shown to be non-integrable, but they admit an integrable reduction …

Fluid-Wall Interactions In Pseudopotential Lattice Boltzmann Models, Cheng Peng, Luis F. Ayala, Orlando M. Ayala

Engineering Technology Faculty Publications

Designing proper fluid-wall interaction forces to achieve proper wetting conditions is an important area of interest in pseudopotential lattice Boltzmann models. In this paper, we propose a modified fluid-wall interaction force that applies for pseudopotential models of both single-component fluids and partially miscible multicomponent fluids, such as hydrocarbon mixtures. A reliable correlation that predicts the resulting liquid contact angle on a flat solid surface is also proposed. This correlation works well over a wide variety of pseudopotential lattice Boltzmann models and thermodynamic conditions.

Multiscale Investigation Of Dropwise Condensation On A Smooth Hydrophilic Surface, Shahab Bayani Ahangar

Dissertations, Master's Theses and Master's Reports

The objective of this work is to identify the fundamental mechanism of dropwise condensation on a smooth solid surface by probing the solid-vapor interface during phase-change to evaluate the existence and structure of the thin film and the initial nucleus that develop during condensation. In this work, an automated Surface Plasmon Resonance imaging (SPRi) instrument with the ability to perform imaging in intensity modulation and angular modulation is developed. The SPRi instrument is used to probe (in three dimensions) the adsorbed film that forms on the substrate during dropwise condensation. SPRi with a lateral resolution of ~ 4-10 μm, thickness …

Simulation Of Water Loading In Filter Medium, Anthony Mole

Williams Honors College, Honors Research Projects

This research will model fluid flow through a filter plugged with water droplets using FlexPDE software. After simulations are run at various initial conditions, curves will be developed to correlate the permeability of the filter to variables like water droplet distribution and size.

On The Improvements Of Boundary-Layer Representation For High Resolution Weather Forecasting In Costal-Urban Environments, David Melecio-Vazquez

Dissertations and Theses

As large urban centers around the world become more densely populated, the global conversion from natural to man-made land surfaces will only increase. These land-use changes affect the urban surface energy budget which in turn changes the structure of the planetary boundary layer (PBL) above. With current high-performance computing systems, meteorological and built environment information can be better utilized to quantify the anthropogenic effects of these modifications. Although these systems have improved forecasting near-surface weather conditions, a comprehensive approach to represent urban impacts on the PBL is still limited. Improved PBL representation can lead to better weather and climate forecasts, …

Nebulizer-Based Systems To Improve Pharmaceutical Aerosol Delivery To The Lungs, Benjamin M. Spence

Theses and Dissertations

Combining vibrating mesh nebulizers with additional new technologies leads to substantial improvements in pharmaceutical aerosol delivery to the lungs across therapeutic administration methods. In this dissertation, streamlined components, aerosol administration synchronization, and/or Excipient Enhanced Growth (EEG) technologies were utilized to develop and test several novel devices and aerosol delivery systems. The first focus of this work was to improve the poor delivery efficiency, e.g., 3.6% of nominal dose (Dugernier et al. 2017), of aerosolized medication administration to adult human subjects concurrent with high flow nasal cannula (HFNC) therapy, a form of continuous-flow non-invasive ventilation (NIV). The developed Low-Volume Mixer-Heater (LVMH) …