Polymer Chemistry Commons^™

Sulfurization Of Nanostructured Cobalt Oxide For Energy Storage Applications, Samiyah Fahad Aloqayli

Electronic Theses & Dissertations

Development of energy storage devices with high energy performance, power density, fast charge-discharge capability and long cyclability is needed to meet the increasing demand for energy, power and environmental protection in our daily life. Supercapacitors have great potential in future energy storage devices with magnificent properties. Recently, researchers have shown great progress for the improvement of supercapacitor performance by fabrication of nanostructured transition metal chalcogenides materials. One of the main objectives of this thesis is to synthesize nanostructured cobalt oxide and then converte them to cobalt sulfide using a facile hydrothermal method. The synthesized cobalt oxide and cobalt sulfide were …

Biowaste Derived Rigid Polyurethane Foams And Supercapacitors: A Renewable And Sustainable Alternative For Petrochemicals, Charith K. R. Akurana Gamaralalage

Electronic Theses & Dissertations

Bio-based polyol for rigid polyurethane (PU) foams and porous structured carbon as an electrode material for supercapacitors were synthesized from readily available biowaste precursor (orange peel) as an alternative to currently used petroleum-based starting materials. Synthesized bio-based polyols were characterized using FTIR, GPC, hydroxyl number, and viscosity measurements. These analyses indicated that intended bio-based polyol was obtained via thiol-ene chemistry with a high yield. Rigid PU foams prepared from bio-based polyol exhibited density around 35 kg/m³, maintained a regular cell structure with uniform cell distribution, closed cell content over 90%, and excellent compressive strength of ~230 kPa, suggesting …

Molecularly Targeted Nanomedicine: Role Of Hsp90 Inhibitor And Sophorolipids In The Treatment Of Lung Cancer, Shuguftha Naz Ms

Electronic Theses & Dissertations

Lactonic sophorolipids (LSL) are a class of enzymatically modified glycolipids known to have HDAC inhibition activity and anticancer properties. Ganetespib (GT), an Hsp90 inhibitor, is known for its superior antitumor activity in several K-RAS mutant Non-Small-Cell Lung Cancer (NSCLC) cells. In this study, a new anti-oxidant nanoplatform is formulated using the combination of these two drugs, LSL and GT, in order to target both HDAC inhibition and Hsp90 signaling pathways in NSCLC. Nanoceria (NC) is an excellent redox platform will be specifically used to supplement the therapeutic potency of these drugs in the effective treatment of NSCLC. We hypothesized that …

Synthesis And Characterization Of Molybdenum Sulfide And For Hydrogen Evolution Reaction And Supercapacitor Applications, Zhuo Wang

Electronic Theses & Dissertations

To meet the constantly rising requirement of energy other than traditional fossil fuel and environment protection, it is a perfect time to development low cost, and efficient materials for clean energy production. Hydrogen generation by water splitting is one of the cleanest ways to produce cheaper energy. Hydrogen evolution reaction (HER) is one of the key steps in water splitting process. Ideally, the thermodynamic potential for HER should be at 0 V (vs. SHE). However, without an efficient catalyst, this reaction occurred at higher potential, called overpotential. A good HER catalyst is needed to lower the overpotential and hence to …

Effects Of Processing Parameters On Properties Of Novel Silica-Filled Polysiloxane Materials, Kyle W. Schwenker

Electronic Theses & Dissertations

Polysiloxanes are a class of materials that possess high temperature stability and the ability to remain flexible at extremely low temperatures. Their elastomers generally exhibit low strength and have poor mechanical properties unless reinforced with fillers. Reinforcement can be accomplished by compounding reinforcing silica fillers with polysiloxanes via twin-screw extrusion compounding that vigorously mixes the fillers into a polymer matrix. In this thesis, a lab-scale twin-screw extruder was utilized to compound thermoplastic materials to determine the effects of processing on thermoplastics material properties, as well as to determine the extruder’s compounding effectiveness. Processing via lab-scale twin-screw extrusion did not negatively …

Abca' Tetrablock Terpolymers: Synthesis And Morphology, Madalyn Radlauer, Seijiro Fukuta, Megan Matta, Joshua Van Benschoten, Marc Hillmyer

Faculty Publications, Chemistry

No abstract provided.

Silver Nanoparticles As A Potential Solar Absorber, Benjamin Hardy

Honors Projects

This work reports the development of Silver nanoparticles implanted into a polymer as a solar absorber. The plasmonic nature of silver nanoparticle allows for adjustments to be made in its UV-VIS-NIR absorbance spectrum. A combination of different sized/shaped particles could result in ideal absorption of the majority of the solar spectrum. Allotting this with the stability of a polymer leads to potential solids or solutions that could work as a solar absorber. Tests were also performed to determine whether or not UV-C irradiation during synthesis effects the characteristics of silver nanoparticles, in particular the absorbance. Successful synthesis of silver nanoparticle …

Influence Of Multiwall Carbon Nanotubes On Corrosion Performance And Water Hydrogen Bonding Of Epoxy-Amine Thin Films, Greg William Curtzwiler

Dissertations

This dissertation research sought to provide a fundamental basis of understanding to commence the systematic investigation of developing economically viable fully formulated epoxy-amine coating systems containing multiwall carbon nanotubes (MWCNT). Namely, a facile and rapid method for multiwall carbon nanotube surface modification and molecular structure interpretation was developed to assist in designing MWCNT-polymer interactions and achieving high levels of dispersion. Additionally, a rapid and quantitative method was developed to investigate the dispersibility potential of MWCNTs possessing a given surface modification in combination with a dispersion protocol which can further be utilized as a quality control metric in commercial applications. It …

Design And Synthesis Of Polymer Brush Surfaces With Complex Molecular Architectures And Morphologies, Wei Guo

Dissertations

The combination of surface-initiated polymerization (SIP) and postpolymerization modification (PPM) is a powerful technique for the fabrication of functional soft surfaces. Better understanding the influence of the aforementioned factors on the PPM effectiveness is valuable for fulfilling the potential of the PPM approach for the fabrication of functional soft surfaces. Specifically, by carefully balancing modification reactivity and limitation of mass transport, polymer brush with composition heterogeneity and gradient along the normal direction of the surface otherwise unattainable by methods of direct polymerization can be fabricated via the PPM approach which opens doors to new routes to polymer brush with complex …

Advancing Structure-Property Relationships In Functional Materials Via Thiol-Ene Photopolymerization, Brian Richard Donovan

Dissertations

Thiol-ene photopolymerizations provide a robust and versatile synthetic pathway to functional materials, and owing to the radical step-growth nature of polymerization and the resulting homogenous network structure, provide non-convoluted insight into how network chemistry influences and dictates macromolecular properties.

The first facet of this dissertation focuses on the design and synthesis of bio-inspired, thin film adhesives for dry and aqueous adhesion. Drawing inspiration from the intertidal marine mussel, Chapter II details the synthesis of adhesive networks containing a monofunctional catechol-based monomer. The inclusion of a catechol group resulted in significant improvements in adhesion on a variety of substrates. In Chapter …

Rate Acceleration Of Organocatalytic Ring-Opening Polymerization Rough The Application Of Bis- And Tris- ( Io)Urea H- Bond Donors, Samuel S. Spink

Senior Honors Projects

Well-defined and functionalized polymers have a wide variety of applications in biomedical studies. Advancements in the fields of drug delivery, microelectronics, and medical imaging, among other applications, are predicated upon the development of methods for the synthesis of precision polymers. Organocatalytic ring-opening polymerization (ROP) of cyclic monomers is an effective route to the production of polymeric materials, namely polyesters and polycarbonates, whose biodegradable properties make them a viable option in biomedical research. Arguably, H-bond mediated catalysts are among the most selective catalysts for ROP, giving rise to highly functionalized polycarbonates, well-controlled polymerizations, and other custom tailored applications. With respect to …

Exploring Thermoresponsive Affinity Agents To Enhance Microdialysis Sampling Efficiency Of Proteins, Thaddeus Vasicek

Graduate Theses and Dissertations

Affinity agents increase microdialysis protein relative recovery, yet they have not seen widespread use within the microdialysis community due to their additional instrumentation requirements and prohibitive cost. This dissertation describes new affinity agents for microdialysis that require no additional instrumentation to use, have nearly 100% particle recovery, are 7 times more cost efficient than alternatives, and have low specificity enabling their use for a wide variety of proteins. Initially gold nanoparticles were chosen as an affinity ligand support due to their high surface area/volume ratio and colloidal stability. Poly (N-isopropylacrylamide) was immobilized to the gold nanoparticles, which served to sterically …

Polyisobutylene Telechelic Prepolymers By In Situ End-Quenching And Post-Polymerization Modifications, Bin Yang

Dissertations

This volume focuses on the development of telechelic polyisobutylene (PIB) prepolymers by combining end-capping of living carbocationic polymerization of isobutylene (IB) with suitable reactants and post-polymerization modifications. Alkylation kinetics of PIB tert-chloride with alkoxybenzenes using either TiCl₄ or AlCl₃ were investigated. Quantitative para-position end-capped products were only achieved if the alkoxybenzene/AlCl₃ molar ratio was greater than unity; while no such molar ratio is required for TiCl₄, but the alkylation rate was slower than AlCl₃ under the same conditions. Photopolymerization kinetics analysis of PIB triphenol tri(meth)acrylates with low and high M_ns, …

Synthesis Of Polythioether Nanoparticles Via Thiol-Alkene/Alkyne Photopolymerization In Miniemulsion, Susan E. Walley

Honors Theses

Emulsion-based processes – such as miniemulsion polymerizations – provide well-studied synthetic routes to polymer nanomaterials. Miniemulsion polymerizations are characterized as aqueous dispersions of small, narrowly distributed monomer droplets created through high shear and stabilized against Ostwald ripening/collisional degradation by addition of an appropriate surfactant and costabilizer. In this work, thiol–alkene/alkyne photopolymerization in miniemulsion is demonstrated as a simple, rapid, and one-pot synthetic approach to polythioether nanoparticles with tuneable particle size and clickable functionality. Nanoparticles with mean particle diameters ranging from 45 nm to 200 nm were synthesized through simple modifications to the miniemulsion formulation and processing parameters. Facile access to …

Characterization Of Epoxy/Amine Networks With Glycidal Polyhedral Oligomeric Silsesquioxane Surface Modified Silica Nanoparticles, Reese K. Sloan

Honors Theses

Silica nanoparticles were surface modified with octa-functional glycidal polyhedral oligomeric silsesquioxane (G-POSS) and incorporated into an epoxy/amine system in an effort to increase the mechanical performance of the inorganic/organic hybrid material. The silica nanoparticles were first functionalized with 3-aminoprpyltrimethoxysilane (APTMOS) at 5 and 10 weight percent, and then modified with G-POSS at ratios of 1:10 and 1:5 (APTMOS: G-POSS). The modified particles were then incorporated into an epoxy/amine network consisting of diglycidyl ether of bisphenol A (DGEBA) and aromatic amine, diamine diphenyl sulfone (4,4’ DDS) at 1 and 5 weight percent, resulting in 8 different formulations. The incorporation of the …

An Investigation Of The Use Of Cerium And Polyhedral Oligomeric Silsesquioxanes For The Protection Of Polymeric Epoxy Compounds In The Low Earth Orbit Environment, Jessica Miriam Piness

Dissertations

Low Earth orbit presents many hazards for composites including atomic oxygen, UV radiation, thermal cycling, micrometeoroids, and high energy protons. Atomic oxygen and vacuum ultraviolet radiation are of concern for space-bound polymeric materials as they degrade the polymers used as matrices for carbon fiber composites, which are used in satellites and space vehicles due to their high strength to weight ratios. Epoxy-amine thermosets comprise a common class of matrix due to processability and good thermal attributes. Polyhedral oligomeric silsesquioxanes (POSS) have shown the ability to reduce erosion in polyimides, polyurethanes, and other polymers when exposed to atomic oxygen. The POSS …

Formation Of Nanostructured Epoxy Networks Containing Polyhedral Oligomeric Silsesquioxane (Poss) And Silica Nanoparticles, Amit K. Sharma

Dissertations

This dissertation is focused on structure-property-processing relationship studies based on well-defined polyhedral oligomeric silsesquioxane (POSS) modified epoxy networks to present a comprehensive understanding of hybrid network behavior. In this research, a monoamine functional POSS molecule is incorporated into the epoxy monomer as pendant unit to mimic common epoxy structures and then crosslinked to form well-defined epoxy hybrid networks. The POSS cages behave as nanosized pendant unit in the epoxy matrices, while the mass fraction of POSS cages is varied and the effects on physical properties are examined with respect to changes in network architecture.

A novel continuous reactor method is …

Bioinspired Design Of Wetting And Anti-Wetting Surfaces Via Thiol-Ene Photopolymerization, Li Xiong

Dissertations

Surface wettability is known to have a profound influence in both academic study and industrial application of materials. Superhydrophobic surfaces, with a static contact angle higher than 150° and a contact angle hysteresis lower than 10°, have received continued attention for their broad applications, such as self-cleaning, antifogging and frosting, and drag reduction. The continuous development of materials and approaches that used to create superhydrophobic surfaces has led to further exploration of coatings with other desirable properties such as superamphiphobicity, mechanical robustness and thermal stability.

In this work, coatings with super wetting and super anti-wetting properties were designed and fabricated …

Effect Of Chain Rigidity On Network Architecture And Deformation Behavior Of Glassy Polymer Networks, Kyler Reser Knowles

Dissertations

Processing carbon fiber composite laminates creates molecular-level strains in the thermoset matrix upon curing and cooling which can lead to failures such as geometry deformations, micro-cracking, and other issues. It is known strain creation is attributed to the significant volume and physical state changes undergone by the polymer matrix throughout the curing process, though storage and relaxation of cure-induced strains remain poorly understood. This dissertation establishes two approaches to address the issue. The first establishes testing methods to simultaneously measure key volumetric properties of a carbon fiber composite laminate and its polymer matrix. The second approach considers the rigidity of …

Fluorescent Conjugated Polymers With A Bodipy-Based Backbone And Uses Thereof, Haiying Liu

Michigan Tech Patents

The present invention provides various fluorescent conjugated polymers with a BODIPY-based backbone. The invention also provides methods of using the polymers of the invention, such as for imaging and detection of cells, tumors, bacteria and viruses.