Electrochemiluminescence Imaging Focusing: Array Analysis And Visualization Of Latent Fingerprints,
2014
Institute of Microanalytical Systems, Department of Chemistry, Zhejiang University, Hangzhou 310058, China;
Electrochemiluminescence Imaging Focusing: Array Analysis And Visualization Of Latent Fingerprints, Zhen-Yu Zhou, Lin-Ru Xu, Bin Su
Journal of Electrochemistry
Electrochemiluminescence (ECL) imaging, as a novel and powerful analytical method, possesses many distinct advantages, including simplicity, high controllability, high-throughput and visualization. In recent years, it has been used in developing portable and miniaturized ECL sensor, and made remarkable achievements. In this review, the progress of ECL imaging, focusing on array analysis and visualization of latent fingerprints, has been introduced briefly based on our recent investigations and an attempt has been made to propose the future research trend.
Direct Electrochemistry And Glucose Biosensing Of Glucose Oxidase-Gold Nanoparticles Composite Synthesized By Enzyme Method,
2014
Key Laboratory of Chemical Biology and Traditional Chinese Medicine Research (Ministry of Education), College of Chemistry and Chemical Engineering, Hunan Normal University, Changsha 410081, China;
Direct Electrochemistry And Glucose Biosensing Of Glucose Oxidase-Gold Nanoparticles Composite Synthesized By Enzyme Method, Fang He, Xiao-Li Qin, Ying-Chun Fu, Chao Chen, Qing-Ji Xie, Shou-Zhuo Yao
Journal of Electrochemistry
Glucose oxidase (GOx)-gold nanoparticles (AuNPs) composite was synthesized by the one-pot enzyme reaction in the mixture solution of NaAuCl4, GOx and glucose, and a Nafion/GOx-AuNPs/glassy carbon electrode was fabricated by the cast-coating method to examine the direct electrochemistry of GOx and the biosensing performance on this electrode. Such a GOx-AuNPs composite showed good direct-electrochemistry activity and bioactivity of GOx, probably because the enzyme-mediated AuNPs are close to the redox active centers of GOx. This enzyme electrode exhibited a linear amperometric response to glucose concentration (0.54 mmol·L-1) at -0.4 V (vs. SCE), and a detection limit of …
Preparation Of Surface Molecularly Imprinted Magnetic Nanoparticles For Hemoglobin Sensing,
2014
Department of Chemistry, Nanchang University, Nanchang 330031, China;School of Chemistry and Chemical Engineering, Jinggangshan University, Ji’an 343009, Jiangxi, China;
Preparation Of Surface Molecularly Imprinted Magnetic Nanoparticles For Hemoglobin Sensing, Chun-Fang Huang, Gui-Hong Yao, Jian-Ding Qiu
Journal of Electrochemistry
Surface molecularly imprinted magnetic nanoparticles (NPs) were prepared by employing dopamine (DA) as a functional monomer, hemoglobin (Hb) as a template, H2PtCl6 as an oxidant triggered DA polymerization on the surface of the Fe3O4 NPs. The Hb and the formed platinum nanoparticles (PtNPs) were embedded into the polydopamine (PDA). After removal of the Hb, the surface molecularly imprinted magnetic nanoparticles (imprinted Fe3O4/PDA-PtNPs) were formed, and then simply immobilized on the magnetic glassy carbon electrode (imprinted Fe3O4/PDA-PtNPs/MGCE) for Hb sensing. The imprinted Fe3O4/PDA-PtNPs …
Enzyme-Based Dna Electrochemical Biosensors: Recent Trends,
2014
State Key Laboratory of Physical Chemistry of Solid Surfaces, Department of Chemistry, College of Chemistry and Chemical Engineering, XiamenUniversity, Xiamen 361005, Fujian, China;
Enzyme-Based Dna Electrochemical Biosensors: Recent Trends, Chun-Shui Lin, Yi-Ru Wang, Xi Chen
Journal of Electrochemistry
DNA electrochemical sensors have greatly promoted the development of biosensors for their high sensitivity, good selectivity, short analysis time and low cost. To further improve the detection sensitivity and selectivity, protein enzymes, functional nucleic acid enzymes etc. are often used due to the advantages of high catalytic efficiency and specificity. This review demonstrates the research progress of electrochemical sensors based on enzymatic amplification and analyses some existing problems of electrochemical sensors.
Resolve Mono-Electronic Process In The Voltammetric Behaviors Of Multi-Redox Bis-Coenzyme Q0,
2014
Key Laboratory of Advanced Material (ECUST), Ministry of Education, East China University of Science and Technology, Shanghai 200237, China;
Resolve Mono-Electronic Process In The Voltammetric Behaviors Of Multi-Redox Bis-Coenzyme Q0, Hao Zhou, Yi-Tao Long
Journal of Electrochemistry
A widely held concept in electrochemistry is that truly elementary electron-transfer reactions always involve the exchange of one electron, therefore, an overall process involving a change of n electrons must involve n distinct electron-transfer steps. It is highly desirable to resolve multiple-step electron transfer reactions into each electron transfer step. The electrochemical behaviors of coenzyme Q0 and methylene-bridged Bis-coenzyme Q0 were investigated by cyclic voltammetry and square wave voltammetry in nonaqueous dichloromethane containing 0.15 mol·L-1 Bu4NClO4 as the supporting electrolyte. The redox reaction of coenzyme Q0 is well described as two chemically reversible …
Density Functional Theory Study On The Structures Of Solvent-Ion In The Electrolyte Of Lithium Ion Battery,
2014
School of Chemistry and Environment, Engineering Research Center of Materials and Technology for Electrochemical Energy Storage (Ministry of Education), and Key Laboratory of Electrochemical Technology on Energy Storage and Power Generation of Guangdong Higher Education Institutes, South China Normal University, Guangzhou 510631, China;
Density Functional Theory Study On The Structures Of Solvent-Ion In The Electrolyte Of Lithium Ion Battery, Li-Dan Xing, Ru Yang, Xian-Wen Tang, Wen-Na Huang, Qi-Feng Liu, Qi-Peng Yu, Wei-Shan Li
Journal of Electrochemistry
In this work, the possible structures of solvent-ion complex, resulting from the electrostatic interaction in the propylene carbonate (PC) base electrolyte of lithium ion battery, have been investigated using the density functional theory. The calculated results show that the structure of solvent-ion complex depends on the solvent number. In the PC base electrolyte, maximum number of PC solvents that coexist in the Li+-solvent sheath is four. Additionally, the salt anion exists in a complex with the positively charged alkyl group of PC rather than in a free state. The calculated results give a good explanation to the reported …
Template-Assisted Fabrication Of Ferromagnetic Nanomaterials,
2014
LSU New Orleans
Template-Assisted Fabrication Of Ferromagnetic Nanomaterials, Jagnyaseni Tripathy
LSU New Orleans Theses and Dissertations
Abstract
Template assisted deposition was used to produce various nanomaterials including simple nanowires, nanorods, multi-segmented metal nanowires, core-shell nanowires, alloy and polymer wires and tubes. Anodized aluminum oxide (AAO) membranes were used as templates for the growth of the various structures using an electrochemical deposition method and also by wetting the porous templates. In the electrochemical deposition method, the pore size of the templates affects the rate of synthesis and the structures of the nanomaterials while in the wetting method, the viscosity and reaction time in the polymer solution influence the structures of the nanomaterials.
A conventional two-step anodization procedure …
Manufacturing Of Transparent Composites Using Vacuum Infusion Process,
2014
Missouri University of Science and Technology
Manufacturing Of Transparent Composites Using Vacuum Infusion Process, V. G.K. Menta, R. R. Vuppalapati, K. Chandrashekhara, Thomas P. Schuman
Chemistry Faculty Research & Creative Works
A novel optically transparent glass fiber reinforced polymer matrix composite has been developed by infusing a clear epoxy resin system of matching refractive index into a conventional E-glass fabric preform. Transparent composites are manufactured using a low cost, environmentally friendly vacuum infusion process. Physical and mechanical tests have been conducted. Transparent composites manufactured using the modified vacuum infusion process had a fiber volume fraction of 40%. Tensile strength and tensile modulus of these composites were 374.9 MPa and 31.74 GPa respectively. The results indicate that the transparent composites possess good physical and mechanical properties. These transparent composites form a good …
Reducing The Effects Of Shot Noise Using Nanoparticles,
2014
Intel
Reducing The Effects Of Shot Noise Using Nanoparticles, Moshood K. Morakinyo, Shankar B. Rananavare
Chemistry Faculty Publications and Presentations
We present a hybrid nano-lithographic approach to minimizes the effects of line edge roughness and shot noise in nano-hole patterning by reflowing photoresist polymers around the nanoparticles deposited using self-assembly and simple etch chemistries. The method extends the transistor contact holes patterning limits to below 20 nm.
Influence Of Pt:Ru Ratio In Nanotubes Array Structures On The Electrocatalytic Activity Of Methanol Oxidation,
2014
State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210093, China;
Influence Of Pt:Ru Ratio In Nanotubes Array Structures On The Electrocatalytic Activity Of Methanol Oxidation, Jin-Hua Yuan, Feng-Bin Wang, Xing-Hua Xia
Journal of Electrochemistry
Bimetallic PtRu nanotubes array electrodes (NTAEs) with varied Pt to Ru atomic ratios have been prepared by electrochemical codeposition in 3-aminopropyltri-methoxysilane modified porous anodic alumina (PAA) membranes. The structure and morphology of the catalysts were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Electrochemical results showed that the NTAEs with varied atomic ratios could be achieved by controlling the precursor concentration for deposition. The prepared nanoarrays composed of Pt or PtRu alloy promoted the mass-normalized activity toward the sluggish electrooxidation reaction of methanol due to the increased catalytic activity and real surface area, as well as the …
Electrochemistry Of Glucose Oxidase Modified On Porin-Phospholipid Biomimic Membrane,
2014
Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China;Changchun Institute of Technology, Changchun 1300122, China;
Electrochemistry Of Glucose Oxidase Modified On Porin-Phospholipid Biomimic Membrane, Kun-Qi Wang, Zuo-Ming Zhang, Wei Xing, Chang-Peng Liu, Xing Zhou
Journal of Electrochemistry
Biomimic membrane with nano-channels, which is made up of porin MspA and 1,2-Dimyristoyl-sn-glycero-3-phosphocholine (DMPC) is constructed on glassy carbon substrate, and glucose oxidase (GOD) is modified on it. The direct electrochemical reaction and electrocatalytic behavior to oxygen and glucose of GOD on the GOD/MspA-DMPC/GC electreode are expounded by the cyclic voltammetric method. The study shows that GOD immobilized on porin MspA and DMPC biomimic membrane displays direct and surface-controlled electrochemical reaction nearby formal potential (E0′) of the flavoprotein active centre (FAD/FADH), and the electrochemical reaction contains two electrons and two protons exchange in 0.1 mmol·L-1 phosphate buffer solution (PBS) …
Effect Of Imidazole Ionic Liquids On The Electro-Oxidation Of P-Methoxy Toluene,
2014
State Key Laboratory Breeding Base of Green Chemistry Synthesis Technology, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310032, China;
Effect Of Imidazole Ionic Liquids On The Electro-Oxidation Of P-Methoxy Toluene, Qiong Chen, Ying-Hong Zhu, Ying Zhu, Yan-Fang Li, Chun-An Ma
Journal of Electrochemistry
The interactions between four Imidazole ionic liquids (EMIMBF4, BMIMBF4, BMIMHSO4, BMIMAc) and p-methoxy toluene were investigated by ultraviolet spectroscopy. The red shifts of absorption peak were obviously observed, and the fine structures of the spectroscopy were disappeared on the long wave district. p-MT producing stable excited state was benefit from the interaction with solvent molecules. The electro-oxidation behavious of p-MT were studied in the four ILs on platinum electrode by cyclic voltammetry (CV) and chronoamperometry (CP), and the diffusion coefficients (D) and activation energies (ED) were calculated. The results indicated that the electro-oxidation process …
Review Of Carbon Materials Energy Storage Mechanism In Lead-Carbon Battery,
2014
University of Science and Technology Beijing, Beijing 100083, China;Reserarch Institute of Chemical Defense, Beijing 100191, China;
Review Of Carbon Materials Energy Storage Mechanism In Lead-Carbon Battery, Le-Ying Wang, Hao Zhang, Chen Hu, Shu-Kai Zhang, Hai-Lei Zhao, Gao-Ping Cao, Wen-Feng Zhang, Yu-Sheng Yang, Xiao-Kang Lai
Journal of Electrochemistry
The traditional lead-acid batteries are mainly used for automobile and various internal combustion engine starting, wireless communication base stations and renewable energy storage; however, their negative plates are easily sulfated under partial-state-of-charge duty, then their charging capacity and cycle life are greatly reduced. Lead-carbon battery is a new type of lead-acid battery, in which a carbon material with high specific surface area and conductivity is added into a negative plate, and has excellent rate discharge performance and higher PSoC cycle life. Lead-carbon battery has a good application prospect in energy storage and hybrid electric vehicle, so these years the study …
Determination Of Folic Acid By Composite Film Electrode Modified With Poly-Alizarin Red And Multi-Walled Carbon Nanotubes,
2014
Institute of Environmental and Analytical Sciences, College of Chemistry and Chemical Engineering, Henan University, Kaifeng 475004, Henan, China;
Determination Of Folic Acid By Composite Film Electrode Modified With Poly-Alizarin Red And Multi-Walled Carbon Nanotubes, Xue-Ping Du, Tong-Fang Lou, Ying Dong, Jian-Ying Qu
Journal of Electrochemistry
The novel modified electrode was fabricated by electropolymerizing alizarin red onto the surface of multi-walled carbon nanotubes on glassy carbon electrode surface, which exhibited good electrocatalytic activity for folic acid. The experimental results showed that the reduction peak current of folic acid at -0.63 V was linear to its concentration over the range of 1.25×10-6 ~ 4.00×10-5 mol·L-1 in the optimized experimental conditions (R = 0.9985). Test for recovery was carried out by standard addition method, and the recovery ratios were in the range of 92.0% ~ 102.0%. The modified electrode was prepared simply with excellent stability, …
Electro-Catalytic Properties Of Β-Pbo2/Sb-Sno2/Ti Electrode On Phenol Oxidation,
2014
School of Environment and Spatial Informatics, China University of Mining and Technology, Xuzhou 22116, Jiangsu, China;
Electro-Catalytic Properties Of Β-Pbo2/Sb-Sno2/Ti Electrode On Phenol Oxidation, Peng Li, Yue-Min Zhao, Li-Zhang Wang, Yan-Le Zhang, Zhao-Qing Lu
Journal of Electrochemistry
The combination technology of brush pyrolysis and electroplating was employed in the preparation of β-PbO2/Sb-SnO2/Ti electrode. X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) results showed that the Sb-SnO2 as an interlayer would restrain the formation of lead fluoride and the crystallization degree on the electrode surface could be as high as 100%. The grain size was calculated by Scherrer formula to be 25.2 nm and the agglomeration of lead dioxide was effectively eliminated. The potential span of diffusion control phase, oxygen evolution potential, Tafel slope for the β-PbO2/Sb-SnO2/Ti electrode during …
Boosting Electrocatalytic Activity Of Nitrogen-Doped Graphene/Carbon Nanotube Composite For Oxygen Reduction Reaction,
2014
Beijing National Laboratory for Molecular Sciences, Key Laboratory of Molecular Nanostructure and Nanotechnology, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, China;State Key Laboratory of Power Transmission Equipment & System Security and New Technology, College of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China;
Boosting Electrocatalytic Activity Of Nitrogen-Doped Graphene/Carbon Nanotube Composite For Oxygen Reduction Reaction, Yu Zhang, Jin-Song Hu, Wen-Jie Jiang, Lin Guo, Zi-Dong Wei, Li-Jun Wan
Journal of Electrochemistry
Developing low-cost catalysts with high electrocatalytic activity for oxygen reduction reaction (ORR) has recently attracted much attention because the sluggish ORR currently limits the performance and commercialization of fuel cells and metal-air batteries as well. Nitrogen doped carbon materials have been considered as a promising candidate for the replacement of high-cost and scarce Pt-based catalysts although their electrocatalytic activity still needs to be much improved. In this work, an improved nitrogen-doped graphene/carbon nanotubes composite (N-rGO/CNT) was developed as an efficient ORR electrocatalyst. It was found that the ORR activity of N-rGO/CNT composite could be significantly enhanced by introducing iron in …
Electrochemical Deposition Of Copt Alloy Thin Film And Its Abnormal Infrared Effects,
2014
State Key Laboratory of Physical Chemistry of Solid Surfaces, Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, Fujian, China;State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou 350002, China;
Electrochemical Deposition Of Copt Alloy Thin Film And Its Abnormal Infrared Effects, Qing-Song Chen, Guo-Cong Guo, Shi-Gang Sun
Journal of Electrochemistry
Nanostructured CoPt alloy thin film was deposited on glassy carbon substrate (denoted as CoPt/GC) under cyclic voltammetric conditions. SEM studies demonstrated that the CoPt/GC was composed of nonuniform nanoparticles with an average size of 139 nm. The composition of the CoPt/GC was analyzed by energy dispersive X-ray spectroscopy (EDS), which depicts a Co:Pt ratio of ca. 3:5. In situ FTIR spectroscopy employing CO adsorption as a probe reaction revealed that the CoPt/GC exhibits abnormal infrared effects (AIREs). The unique anomalous IR features of CO adsorbed (COad) on CoPt/GC consist in the complete inversion of the COad IR …
Recent Progress In Heteroatoms Doped Carbon Materials As A Catalyst For Oxygen Reduction Reaction,
2014
School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China;
Recent Progress In Heteroatoms Doped Carbon Materials As A Catalyst For Oxygen Reduction Reaction, Wei Ding, Xue Zhang, Li Li, Zi-Dong Wei
Journal of Electrochemistry
Developing catalytic materials for oxygen reduction reactions (ORR) with high performance and low cost has been one of the major challenges for large-scale applications of fuel cells. In this review, we summarize the recent progress in the heteroatoms doped carbon materials as a catalyst for the catalysis of ORR, with an emphasis on the universal origin of their catalytic mechanisms. The future prospects of the metal-free catalyst were to find precisely controlled doping methods, to explore the role of heteroatoms in the catalysis, and to generate more active catalysts with suitable nanostructure.
Fabrication Of Pattern Of Graphene Oxide And Au Nanoparticles By Microcontanct Printing Technique,
2014
Key Laboratory of Analysis and Detection Technology for Food Safety, Ministry of Education, College of Chemistry and Chemical Engineering, Fuzhou University, Fuzhou 350108, China;
Fabrication Of Pattern Of Graphene Oxide And Au Nanoparticles By Microcontanct Printing Technique, Wen-Hui Pang, Xiao-Jian Xiao, Meng-Wei Ye, Kai-Chao Deng, Jing Tang
Journal of Electrochemistry
Graphene oxide (GO) was prepared by modified Hummers method. Using the GO solution as "ink", Au nanoparticles (AuNPs) and GO were transferred to the surface of ITO substrate modified with (3-aminopropyl) triethoxysilane (APTES/ITO) in a sequence. The transferred AuNPs and GO could form a uniform and dense composite pattern which was characterized by FE-SEM and AFM. Moreover, using the APTES/ITO substrate surface potential as zero, the sequences of the surface potential were APTES>GO>Au.
Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Cu-Lscm-Ceo2 Catalyst Layer In The Thin Film Sofc,
2014
Institute of Fuel Cell, School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China;
Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Cu-Lscm-Ceo2 Catalyst Layer In The Thin Film Sofc, Yao Lv, Bo Huang, Xi-Zhi Gu, Chun-Yi Hou, Yi-Xing Hu, Xiao-Yin Wang, Xin-Jian Zhu
Journal of Electrochemistry
Solid oxide fuel cell (SOFC) directly operating on hydrocarbon without external reforming has the potential of greatly speeding up the application of SOFCs for transportation. In this paper, a three-layer structure anode was fabricated by tape casting and screen printing method. The addition of Cu-LSCM-CeO2 to the supported anode surface presented better performance running on H2 and ethanol. The maximum power densities were 511 and 390 mW?cm-2, respectively, running on H2 and ethanol at 750 °C. No significant degradation was observed on the anode. Consequently, the Cu-LSCM-CeO2 catalyst layer on the surface of the …
