Materials Chemistry Commons^™

Electrochemical Detection Of Hydrogen Peroxide At Aunps Modified Electrode Using P-Hydroxyphenylboronic Acid As A Precursor, Chun-Yan Wang, Xiao-Qiu Liu, Ying-Xin Qi

Journal of Electrochemistry

We developed a new method for electrochemical detection of hydrogen peroxide (H₂O₂) based on boronate oxidation of p-hydroxyphenylboronic acid. This method using p-aminophenol which is produced from the reaction of H₂O₂ and p-aminophenylboronic acid as a well electrochemical probe, combined with a gold nanoparticles (AuNPs) modified electrode for an indirect detection of H₂O₂. Because of the large surface area and enhanced electrocatalytic behavior by the AuNPs modified electrode, the detection sensitivity was improved. The method could detect H₂O₂ in the concentration range of 1 ~ 100 …

Electrochemical Determination Of Hg(Ii) At Gold Nanoparticles@Carbonaceous Microspheres Modified Electrode, Tian-Yu Qiu, Ming-Chun Wang, Xian-Feng Du, Tian-Jia Jiang, Xing-Jiu Huang

Journal of Electrochemistry

The gold nanoparticles@carbonaceous microspheres (Au@CMSs) and  Au@CMSs modified glassy carbon electrode (GCE) were prepared. The Au@CMSs modified  GCE was further examined for possible sensitive detection of mercury ions (Hg(II)) in an aqueous solution by square wave anodic stripping voltammetry (SWASV). The excellent performance was found in the stripping analysis of Hg(II) in 0.1 mol•L^-1 NaAc-HAc(pH=5.0) with a sensitivity of 25.863 A•(mol•L^-1)^-1 and a detection limit of 3.69×10^-8 mol•L^-1 based on the 3σ method.

Fabrication Of Riboflavin Electrochemical Sensor Based On Au Nanoparticles/Polydopamine/Carbon Nanotubes Modified Glassy Carbon Electrode, Hua-Ping Peng, Mei-Ling Yu, Xin Liu, Pan Liu, Wei Chen, Ai-Lin Liu, Xin-Hua Lin

Journal of Electrochemistry

A novel electrochemical platform for the high sensitivity detection of riboflavin was constructed by Au nanoparticles/polydopamine/carbon nanotubes (Au-PDA-MWCNTs) nanocomposite modified glassy carbon electrode. The Au-PDA-MWCNTs nanocomposite was synthesized by in situ reduction method. The characteristics of the as-prepared Au-PDA-MWCNTs nanocomposite modified electrodes were investigated by using UV-Vis spectroscopy, scanning electron microscopy (SEM) and electrochemical methods. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to study the electrochemical behavior of riboflavin (RF) at Au-PDA-MWCNTs nanocomposite modified electrodes. The results demonstrated that the present electrochemical sensor exhibited a wide linear range from 5×10^-9 mol•L^-1to 1×10^-5 mol•L …

Synthesis Of Fe, N-Doped Graphene/Carbon Black Composite With High Catalytic Activity For Oxygen Reduction Reaction, Chi Chen, Zhi-You Zhou, Xin-Sheng Zhang, Shi-Gang Sun

Journal of Electrochemistry

Oxygen reduction reaction (ORR) is a bottleneck for improving the efficiency of proton-exchange membrane fuel cells as a cathode reaction due to its sluggish kinetics. The exploitation of low cost and high performance non-precious metal catalysts such as Fe/N/C based materials toward ORR has attracted extensive attentions. In this work, the Fe, N-doped graphene nanosheets/carbon black composite was prepared by hydrothermal polymerization and followed by a twice-heat-treatment procedure using 2-aminoimidazole as an N precursor, FeCl₃ as an Fe precursor and KJ600 carbon black as a support. The TEM images revealed that the graphene nanosheets were separated by carbon black …

Electrochemical Syntheses Of Graphene And Its Composites, Bo Zhao, Li Jiang, Ming-Hui Yuen, Xian-Zhu Fu, Rong Sun, Ching-Ping Wong

Journal of Electrochemistry

Graphene is a kind of ideal two-dimensional flat carbon nanomaterials which have unique chemical and physical properties. The attractive potential applications must be based on the high quality mass production of graphene. However, it remains a huge challenge. An electrochemical approach is a fast, environmental friendly and easy-operating method. single- or multi-layered graphene flakes can easily be produced in short periods of time. In this review, the structure, properties and preparation methods of graphene are first introduced. Accordingly, the electrochemical approaches used for the productions of graphene flakes, graphene/inorganic nanocomposites, graphene/polymer composites and graphene analogues are highlighted. Finally, challenges and …

Effect Of Flame Retardant On Electrochemical Performances Of Lithium Ion Battery With Lini0.4Co0.2Mn0.4O2 As A Positive Electrode Material, Yan-Zhuo Lv, Yong-Xian Ge, Zhen-Bo Wang, Ke Ke

Journal of Electrochemistry

The effect of flame retardant on the electrochemical performances of lithium ion battery by using LiNi_0.4Co_0.2Mn_0.4O₂ as a positive material was studied by measuring the first charge-discharge, cycling, circulation, and AC impedance curves. The experimental data indicated that the discharge capacity of the battery decreased, while the charge transfer resistance and the lithium ion diffusion resistance increased with the increases in the concentrations of the flame retardant in the electrolyte solutions. Furthermore, the stability of the battery at small discharge ratios and the cyclic performance were also improved by the addition of flame …

Electricity Generation Of Microbial Fuel Cell Using Stainless Steel Mesh As Cathode, Hong-Yan Dai, Hui-Min Yang, Xian Liu, Xuan Jian, Xiu-Li Song, Zhen-Hai Liang

Journal of Electrochemistry

In the present work, a dual-chamber microbial fuel cell (MFC) was constructed with aeration tank sludge as an inoculum, carbon felt as an anode and stainless steel mesh without any modification as a cathode. The influence of the cathode size was investigated in terms of voltage output, power generation and electrochemical impedance. The long-term durability of the stainless steel mesh cathode was also evaluated. Results showed that the stainless steel mesh exhibited satisfactory long-term durability as MFC cathode. When the stainless steel mesh size was 2 × 2 cm², the maximum output voltage, power density, the internal resistance …

The Study On Comparison Of Electrochemical Performance In Microbial Fuel Cell With Glucose And Sodium Acetate Acting As Substrates, Lei Fan, Yu Zhao, Ting Li, Qin-Bo Yuan, En-Zhi Wang, Xiao-Bin Wang, Jun-Wen Wang

Journal of Electrochemistry

By inoculating aerobic sludge and anaerobic sludge from the sewage treatment plant, two sets of dual-chamber microbial fuel cells (MFCs) were built with either glucose or sodium acetate acting as a substrate. Accordingly, the electrochemical performances of MFCs were explored with the concentration of the substrates being 0.0335 mol⋅L^-1. The results of the comparative study in glucose system and sodium acetate system showed that the impedance values of anodic half cell were 222 Ω for glucose and 213.67 Ω for sodium acetate, implying no significant effect on the internal resistance in battery with the different substrates. The exchange …

Sol-Gel Synthesis Of Intermediate Composition, Nanocrystalline Olivine, Corbin Cannon

Theses and Dissertations

Olivine is one of the most important rock forming minerals in our solar system. It forms in a solid-solution series between a magnesium-rich end member, forsterite (Mg2SiO4), and an iron-rich end member, fayalite (Fe2SiO4). For this reason, it is commonly used for experiments regarding the formation and evolution of planetary objects. Scarcity of iron-rich phases and the desirability of pure materials for research force the use of synthetic minerals for these experiments. Previous forsterite and fayalite synthesis methods were reexamined and combined to develop a new synthesis method that can produce a specific composition of olivine within the solid solution …

Design Rules For The Nucleation, Growth, And Encapsulation Of Gold Nanoparticles With Applications To Cancer Imaging, Matthew A. Wall

Dissertations, Theses, and Capstone Projects

Surface-enhanced Raman scattering (SERS) nanoparticles are exciting candidates for high-precision cancer imaging due to their highly specific spectral signature (Raman “fingerprint”) and propensity for passive targeting of cancerous tissues. However, the signal intensity of currently available SERS nanoparticles is insufficient for cancer imaging via passive targeting in most solid tumors. The overarching aim of this body of work is to develop a new generation of SERS nanoparticles with sufficiently low limits of detection to enable robust detection of various solid tumors in vivo.

The complexity of SERS nanoparticles requires significant advances to the theoretical and experimental understanding of metal …

Ultrafast Spectroscopy And Energy Transfer In An Organic/Inorganic Composite Of Zinc Oxide And Graphite Oxide, Jeff A. Secor

Dissertations, Theses, and Capstone Projects

The energy transfers and nature of defect levels of an organic/inorganic composite of Zinc Oxide and Graphite are studied with multidimensional spectroscopy. The edge and surface states of each composite are uncovered using excitation emission experiments showing which defect states are mediating the energy transfer from the metal oxide to the graphite oxide. Multidimensional time resolved spectroscopy further describes the effect of the carbon phase on the energy transfer pathways in the material.

Probing The Transport Properties Of Chemically-Doped Single-Walled Carbon Nantotube Polymer Composites, Tammy Pheuphong, Tamara El-Hayek, Jeffrey Blackburn, Andrew Ferguson

STAR Program Research Presentations

Thermoelectric (TE) materials are used to convert waste heat into electrical power. Semiconducting single-walled carbon nanotubes (s-SWCNT) have great potential to be used in thermoelectric devices, either on their own or in composites with conducting polymers. Certain polymers can selectively extract s-SWCNT from raw carbon nanotube soot (containing impurities such as metallic SWCNT, amorphous carbon, metal catalysts particles), but most of these polymers (e.g. polyfluorenes) are electrical insulators, rendering them inefficient in TE nanocomposites. On the other hand, conducting polymers, such as poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), have been used in efficient TE nanocomposites, but have never been rationally designed with …

Effect Of Spalled Particles Thermal Degradation On A Hypersonic Flow Field Environment, Raghava S. C. Davuluri, Huaibao Zhang, Alexandre Martin

Mechanical Engineering Faculty Publications

Two-way coupling is performed between a spallation code and a hypersonic aerothermodynamics CFD solver to evaluate the effect of spalled particles on the flow field. Time accurate solutions are computed in argon and air flow fields. A single particle simulations and multiple particles simulations are performed and studied. The results show that the carbon vapor released by spalled particles tend to change the composition of the flow field, particularly the upstream region of the shock.

Effects Of Surface Coatings On Crystalization Of Calcium Sulfate, Shawn Pj Kirby, Josiah Reams, Kamran Ghiassi, Jeffrey Alston

STAR Program Research Presentations

Deposits from hard water can be problematic as they can form scaling on boilers and cooling towers. Scaling can reduce thermal efficiency. Coatings can be used to prevent mineral fouling by changing the surface energy. Some deposits have inverse solubility; such as calcium sulfate. This means that as temperature rises, they become less soluble and can crystallize out of solution. Calcium sulfate is often found in hard water. Crystalization tests were done to determine how coatings such as various POSS (Polyhedral oligomeric silsesquioxane) compounds acted as nucleating surfaces for calcium sulfate. POSS compounds were tested in particular because they …

Syntheses And Characterization Of [4]Ferrocenophane, Ahmed Sabah Al-Doori

Theses, Dissertations and Capstones

Metallocenophanes are metallocenes in which the cyclopentadienyl ligands are connected by a molecular bridge. Recently, metallocenophanes have received increasing attention because of their structure, chemical reactivity, and potential use as building blocks for new materials. Even though metallocenophanes have been synthesized by different methods, the majority of these methods involved the use of iron with rare examples of other metals. Therefore, a new method was employed that in addition to making ferrocenophane, will allow us to synthesize metallocenophanes with V, Cr, Mn, Co, and Ni as central metals. This thesis reports the synthesis of [4]ferrocenophane via a “flytrap” route. The …

Electrochemical Oxidation To Construct A Nickel Sulfide/Oxide Heterostructure With Improvement Of Capacitance, Xuan Liu, Bo You, Xin-Yao Yu, Jeffrey Chipman, Yujie Sun

Chemistry and Biochemistry Faculty Publications

Supercapacitors have been widely recognized as a promising device for the storage of renewable energy. Herein, a facile electrochemical oxidation strategy is described to construct a nickel sulfide/oxide heterostructure which enhances the specific areal capacitance of Ni₃S₂ electrode (2035 mF cm^-2 vs. 31 mF cm^-2 at a current density of 8 mA cm^-2), while still maintaining great stability, showing no performance degradation after 5000 charge-discharge cycles. Its exceptional capacitance, advanced rate capability, and superior cycling stability are attributed to the transformed composition and unique nanostructure achieved during electrochemical oxidation, which can provide a …

Unraveling A Generic Growth Pattern In Structure Evolution Of Thiolate-Protected Gold Nanoclusters, Wen Wu Xu, Yadong Li, Yi Gao, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

Precise control of the growth of thiolate-protected gold nanoclusters is a prerequisite for their applications in catalysis and bioengineering. Here, we bring to bear a new series of thiolateprotected nanoclusters with a unique growth pattern, i.e., Au₂₀(SR)₁₆, Au₂₈(SR)₂₀, Au₃₆(SR)₂₄, Au₄₄(SR)₂₈, and Au₅₂(SR)₃₂. These nanoclusters can be viewed as resulting from the stepwise addition of a common structural motif [Au₈(SR)₄]. The highly negative values of the nucleus-independent chemical shift (NICS) in the center of the tetrahedral Au4 …

Tuning The Electronic Properties Of Monolayer And Bilayer Ptse2 Via Strain Engineering, Pengfei Li, Lei Li, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

The recently synthesized monolayer PtSe₂ belongs to the class of two-dimensional transition metal dichalcogenide (TMDC) materials (Nano Lett., 2015, 15, 4013). Based on first-principles calculations, we show that the band gaps of monolayer and bilayer PtSe₂ can be tuned over a wide range via strain engineering. Both isotropic and uniaxial strains are investigated. For bilayer PtSe₂, the vertical out-of-plane strain is also considered. In most cases, the strain can reduce the band gap except for the bilayer PtSe₂ under the isotropic strain (Ɛ≤ 4%) for which the band gap can be slightly enlarged. Importantly, the …

Unraveling A Generic Growth Pattern In Structure Evolution Of Thiolate-Protected Gold Nanoclusters, Wen Wu Xu, Yadong Li, Yi Gao, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

Precise control of the growth of thiolate-protected gold nanoclusters is a prerequisite for their applications in catalysis and bioengineering. Here, we bring to bear a new series of thiolateprotected nanoclusters with a unique growth pattern, i.e., Au₂₀(SR)₁₆, Au₂₈(SR)₂₀, Au₃₆(SR)₂₄, Au₄₄(SR)₂₈, and Au₅₂(SR)₃₂. These nanoclusters can be viewed as resulting from the stepwise addition of a common structural motif [Au₈(SR)₄]. The highly negative values of the nucleus-independent chemical shift (NICS) in the center of the tetrahedral Au …

Mechanistic Study Of Pressure And Temperature Dependent Structural Changes In Reactive Formation Of Silicon Carbonate, Bingyan Qu, Dongdong Li, Lei Wang, Jili Wu, Rulong Zhou, Bo Zhang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

The discovery of the silicon carbonate through chemical reaction between porous SiO₂ and gaseous CO₂ addressed a long-standing question regarding whether the reaction between CO₂ and SiO₂ is possible. However, the detailed atomic structure of silicon carbonate and associated reaction mechanism are still largely unknown. We explore structure changes of silicon carbonate with pressure and temperature based on systematic ab initio molecular dynamics simulations. Our simulations suggest that the reaction proceeds at the surface of the porous SiO₂. Increasing number of CO₂ molecules can take part in the reaction by increasing either the …