Materials Chemistry Commons^™

Fabrication Of Mnox/Mwcnts-Gc Nanocatalyst For Oxygen Evolution Reaction, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Amr M. Arafa Eng.

Chemical Engineering

Manganese oxide (MnOx) and multiwalled carbon nanotubes (MWCNTs) are intended to modify the GC electrode for oxygen evolution reaction (OER). Optimization of MnOx loading is carried out and the deposition of 55 cycles was sufficient to obtain the highest activity toward OER. The stability of the catalyst is enhanced by the addition of MWCNTs. As a result, an amount of 22 kWh/Kg of O2 of energy is saved. Several techniques including cyclic voltammetry, linear sweep voltammetry, chronoamperometry, chronopotentiometry, field-emission scanning electron microscopy, and energy dispersive X-ray spectroscopy will be combined to track the catalyst activity and to determine its morphology …

Assembling Of Niox/Mwcnts-Gc Anodic Nanocatalyst For Water Electrolysis Applications, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Saher D. Khamis Eng

Chemical Engineering

Glassy carbon (GC) electrode is intended to be modified with nickel oxide (NiOx) and multiwalled carbon nanotubes (MWCNTs) in the anodic reaction of water electrolysis. NiOx deposition time is optimized and a 5 min was enough to attain the maximum activity. A further modification of the catalyst with MWCNTs could greatly enhance its stability during continuous electrolysis. As an outcome, an energy amount of 21.7 kWh/KgO2 is minimized. Several electrochemical and materials characterization setups will be utilized to test the catalyst activity and to know its geometry and structure.

Fabrication Of Cuox-Pd Nanocatalyst Supported On A Glassy Carbon Electrode For Enhanced Formic Acid Electro-Oxidation, Islam M. Al-Akraa Dr., Ahmad M. Mohammad Prof, Mohamed S. El-Deab Prof, Bahgat E. El-Anadouli Prof

Chemical Engineering

Formic acid (FA) electro-oxidation (FAO) was investigated at a binary catalyst composed of palladium nanoparticles (PdNPs) and copper oxide nanowires (CuOxNWs) and assembled onto a glassy carbon (GC) electrode. /e deposition sequence of PdNPs and CuOxNWs was properly adjusted in such a way that could improve the electrocatalytic activity and stability of the electrode toward FAO. Several techniques including cyclic voltammetry, chronoamperometry, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction were all combined to report the catalyst’s activity and to evaluate its morphology, composition, and structure. /e highest catalytic activity and stability were obtained at the CuOx/Pd/GC …

Characterization Of Tetraethyl Orthosilicate-Based Dynamic Hydrogels For Use As Reversible 3-D Cell Culture Matrices, Krisitan Stipe

Graduate Student Theses, Dissertations, & Professional Papers

No abstract provided.

Synthesis, And Structural, Electrochemical, And Magnetic Property Characterization Of Promising Electrode Materials For Lithium-Ion Batteries And Sodium-Ion Batteries, Ruixin Han

Theses and Dissertations--Chemistry

Iron oxides, have been widely studied as promising anode materials in lithium-ion batteries (LIBs) for their high capacity (≈ 1000 mA h g^-1 for Fe₂O₃ and Fe₃O_4,), non-toxicity, and low cost. In this work, β-FeOOH has been evaluated within a LIB half-cell showing an excellent capacity of ≈ 1500 mA h g^-1 , superior to Fe₂O₃ or Fe₃O_4. Reaction mechanism has been proposed with the assistance of X-ray photoelectron spectroscopy (XPS). Various magnetic properties have been suggested for β-FeOOH such as superparamagnetism, antiferromagnetism and complex …

Carbon Quantum Dots: Bridging The Gap Between Chemical Structure And Material Properties, Timothy J. Pillar-Little Jr.

Theses and Dissertations--Chemistry

Carbon quantum dots (CQDs) are the latest generation of carbon nanomaterials in applications where fullerenes, carbon nanotubes, and graphene are abundantly used. With several attractive properties such as tunable optical property, edge-functionalization, and defect-rich chemical structure, CQDs have the potential to revolutionize optoelectronics, electro- and photocatalysis, and biomedical applications. Chemical modifications through the addition of heteroatoms, chemical reduction, and surface passivation are found to alter the band gap, spectral position, and emission pathways of CQDs. Despite extensive studies, fundamental understanding of structure-property relationship remains unclear due to the inhomogeneity in chemical structure and a complex emission mechanism for CQDs.

This …

Study Of The Effect Of Steric Bulk Of Side Chains On The Properties Of Conjugated Polymers, Bei Zhang

Theses and Dissertations--Chemistry

Donor-acceptor conjugated polymers opened a new era for conjugated polymer research due to the abundant selection and combination of different conjugated units. This class of polymers function as semiconductor materials with potential application in plastic consumer electronics. The frontier molecular orbital energies of the polymers are generally determined by the selection of donor and acceptor units in the backbone structure, and their substituents. The side chains attached to the backbone not only affect the solubility of the materials, but also their self-assembly and morphological characteristics, which indirectly govern optoelectronic properties. It is important therefore to consider backbone architectures and the …

Design And Synthesis Of Functional Organic Materials, Anthony Joseph Petty Ii

Theses and Dissertations--Chemistry

Control of solid state ordering in conjugated small molecules is paramount to the continued development and implementation of organic materials in electronic devices. However, there exists no reliable method on which to predicatively determine how a change to the molecular structure will impact the solid-state packing. As such, the molecule must be synthesized before its solid-state packing can be definitively evaluated. However, once the packing structure of a material is known there exist both qualitative structure- function relationships derived from the literature, as well as quantitative computational methods that can be employed to suggest if a material will perform well …

Effects Of -No2 And -Nh2 Functional Groups In Mixed-Linker Zr-Based Mofs On Gas Adsorption Of Co2 And Ch4, Zana Hassan Rada, Hongqi Sun, Jin Shang, Jiaye Li, Yingdian He, Shaomin Liu, Shaobin Wang

Research outputs 2014 to 2021

This study was undertaken to evaluate the effects of mixing BDC-NO₂ and BDC-NH₂ linkers in the synthesis of Zr-based metal organic frameworks (Zr-MOFs) on their adsorption and separation of CO₂ and CH₄. UiO-66 with single or binary -NO₂ and -NH₂ samples were synthesized under solvothermal conditions and activated by solvent exchanging using methanol. Structural analyses of the materials were conducted using FTIR, XRD, TGA, SEM, ¹HNMR and N₂ adsorption/desorption techniques and adsorption of CO₂ and CH₄ at high pressures and different temperatures (273 and 298 K) was investigated. It …

Ferromagnetic Shape Memory Heusler Materials: Synthesis, Microstructure Characterization And Magnetostructural Properties, Riaz Ahamed Ahamed Khan, Reza Ghomashchi, Zonghan Xie, Lei Chen

Research outputs 2014 to 2021

An overview of the processing, characterization and magnetostructural properties of ferromagnetic NiMnX (X = group IIIA-VA elements) Heusler alloys is presented. This type of alloy is multiferroic-exhibits more than one ferroic property-and is hence multifunctional. Examples of how different synthesis procedures influence the magnetostructural characteristics of these alloys are shown. Significant microstructural factors, such as the crystal structure, atomic ordering, volume of unit cell, grain size and others, which have a bearing on the properties, have been reviewed. An overriding factor is the composition which, through its tuning, affects the martensitic and magnetic transitions, the transformation temperatures, microstructures and, consequently, …

Use Of Surface Enhanced Raman Spectroscopy For The Detection Of Bioactive Lipids, Christopher M. Ohlhaver

Theses and Dissertations

The detection and analysis of lipids in biological matrices for clinical applications poses many challenges, but rapid and reliable detection will prove invaluable for clinical diagnosis. Herein, we report the application of drop-casted Ag nanoplatelets as surface enhanced Raman scattering (SERS) substrates for qualitative detection of 20-hydroxyeicosatetraenoic acid (20-HETE), which is a potential biomarker for diagnosis of hypertensive disorders. Biomarker peaks of 20-HETE can be reliably detected and differentiated from those of the structurally similar lipids (arachidonic acid, eicosapentaenoic acid, and docosahexaenoic acid) commonly found in human blood, even 1 pM concentrations. Additionally, one study mixed 20-HETE with three structurally …

Colloidal Synthesis And Photophysical Characterization Of Group Iv Alloy And Group Iv-V Semiconductors: Ge1-Xsnx And Sn-P Quantum Dots, Venkatesham Tallapally

Theses and Dissertations

Nanomaterials, typically less than 100 nm size in any direction have gained noteworthy interest from scientific community owing to their significantly different and often improved physical properties compared to their bulk counterparts. Semiconductor nanoparticles (NPs) are of great interest to study their tunable optical properties, primarily as a function of size and shape. Accordingly, there has been a lot of attention paid to synthesize discrete semiconducting nanoparticles, of where Group III-V and II-VI materials have been studied extensively. In contrast, Group IV and Group IV-V based nanocrystals as earth abundant and less-non-toxic semiconductors have not been studied thoroughly. From the …

Metal-Organic Frameworks And Graphene-Based Support Materials For Heterogeneous Catalysis, Andrew Lin

Theses and Dissertations

Nanoparticles are involved in a broad range of applications, including heterogeneous catalysis. Nanoparticles tend to quickly lose their well-defined shapes and facets due to aggregation under duress such as heat.

A series of highly studied materials are explored as support materials for nanoparticle supports. These supports include metal-organic frameworks (MOF), graphene oxide (GO), and a MOF-PRGO (partially reduced graphene oxide) hybrid. The inclusion of a support with the palladium increased lifespan of the catalyst by separation of nanoparticles. The choice of support material not only allowed for supporting of palladium nanoparticles, but allowed for rational catalyst synthesis in order to …

Heteroatom Doped Porous Carbon For Alternative Energy Conversion And Storage Systems, Fatema A. Choudhury

Theses and Dissertations

Abstract

The electrocatalysis of oxygen plays a significant role in several electrochemical energy storage and conversion systems including metal−air batteries, fuel cells, electrocatalytic and photocatalytic water splitting. The sluggish kinetics and complex reaction mechanism of this cathodic oxygen reduction reaction (ORR) affect the performance and practical application of such renewable energy technologies. To address this limiting factor, a suitable electrocatalyst is required for ORR. In general, platinum or highly dispersed Pt-based nanoparticles on carbon black are considered as the best ORR catalyst. But platinum being very scarce and expensive tends to increase the cost. Moreover, platinum-based catalysts are prone to …

Development Of Photocatalysts Supported On Graphitic Carbon Nitride For The Degradation Of Organic Water Pollutants, Atanu Giri

Theses and Dissertations

Graphitic carbon nitride (g-C₃N₄) heterojunction composites with the semiconducting metal oxides, CeO₂, ZnO and TiO₂ are prepared in situ by co-calcination of the precursor materials or by a solvothermal method. The structural, morphological and the optical properties of the prepared materials are studied using various microscopy and spectroscopy techniques. The synthesized composite materials, CeO₂/g-C₃N₄, ZnO/g-C₃N₄ and TiO₂/g-C₃N₄ are more efficient in the photocatalytic degradation of the water pollutants indigo carmine (IC) and atrazine than the pure metal oxide, g-C …

Nitrogen Rich Porous Organic Frameworks: Proton Conduction Behavior Of 3d Benzimidazole And Azo-Linked Polymers, Michael J. Anhorn

Theses and Dissertations

Nitrogen-rich porous organic frameworks show great promise for use as acid-doped proton conducting membranes, due to their high porosity, excellent chemical and thermal stability, ease of synthesis, and high nitrogen content. Aided by very high surface area and pore volume, the material has the ability to adsorb high amounts of H₃PO₄ into its network, which creates a proton rich environment, capable of facile proton conduction. The morphology and chemical environment, doping behavior, and proton conduction of these materials were investigated. With such high acid-doping, ex-situ studies revealed that under anhydrous conditions, PA@BILP-16 (AC) produced a proton conductivity …

Physicochemical, Spectroscopic Properties, And Diffusion Mechanisms Of Small Hydrocarbon Molecules In Mof-74-Mg/Zn: A Quantum Chemical Investigation, Gemechis Degaga

Dissertations, Master's Theses and Master's Reports

In petroleum refining industries, the fracturing process allows for the cracking of long-chain hydrocarbons into a mixture of small olefin and paraffin molecules that are then separated via the energetically and monetarily demanding cryogenic distillation process. In an attempt to mitigate both energetic and capital consumptions, selective sorption of light hydrocarbons by tunable sorbents, such as metal-organic frameworks (MOFs), appears to be the most promising alternative for a more efficient gas separation process. MOFs are novel porous materials assembled from inorganic bricks connected by organic linkers. From a crystal engineering stand point, MOFs are advantageous in creating a range …

The Effect Of Oxidation, Thionation, And Dimerization On The Self-Assembly And Photophysical Properties Of Novel Discotic Materials, Katie M. Psutka

Theses and Dissertations (Comprehensive)

This thesis aims to increase understanding of the relationship between molecular structure and liquid crystalline temperature range by exploring the effects of oxidation, thionation, and dimerization on the self-assembly and properties of novel discotic materials. First, two alkoxy-substituted dibenzanthracenequinones were prepared by oxidation of the corresponding dibenzanthracenes. The quinone induced a liquid crystalline phase in the hexaalkoxy dibenzanthracene derivative, but not in the tetralkoxy derivative. However, both of the resulting materials were un-reactive to any further synthetic modifications that could be used to improve their properties. In comparison, two heteroaromatic dithienoanthracenedicarboximides were successfully prepared, although the addition of the thiophene …

Cascade Annulation And Ring-Opening Reactions Of Castagnoli-Cushman-Derived Allylic And Benzylic Thiomorpholinonates, Abdikani Omar Farah

All Master's Theses

Sulfur-containing compounds are prevalent in antibiotics, essential amino acids, bacterial RNA, food flavors, and enzymes. The divalent sulfur atom introduces a metabolic liability from a drug discovery standpoint. Indeed, it is quite telling that all the top ten best-selling drugs in 2012 contained sulfur. In this context, there is a growing need for the synthesis of sulfur-containing compounds in ways that are practical and cost-effective. One approach taken to achieve this goal is to employ diversity-oriented synthesis (DOS), which produces diverse complex molecules with similar core structures from a common precursor. When a DOS features a cascade or domino reaction …

Characterization Of Coacervate Systems Using Redox Sensitive Dyes, Caleb Kaiser

All Master's Theses

Coacervates are systems that spontaneously form when two oppositely charged polyelectrolytes are mixed in a concentrated salt solution. When coacervates form, a biphasic equilibrium occurs in the sample with two phases present in the solution. The two phases are described as the dense phase and the lean phase, named after the amount of polyelectrolyte material in each phase. Coacervates have been topics of interest to researchers in a variety of fields including biomedical applications, drug delivery devices, and more. This thesis worked towards the characterization of coacervate systems on the molecular level by investigating the interaction of the polyelectrolytes and …