Materials Chemistry Commons^™

Supramolecular Design Of 3d-Printable Hydrogels For Functional Materials, Miao Tang

Dartmouth College Ph.D Dissertations

Additive manufacturing, more commonly known as 3D-printing, is bringing about a grand technological transformation in material design and fabrication. In contrast to traditional fabrication techniques, 3D-printing features rapid prototyping, complex and customized 3D structural designs, and multi-material integration. Among current 3D-printing systems, direct-ink-writing (DIW) exhibits unique functionalities due to its mild operation conditions and the ability to integrate various organic and inorganic entities. Although supramolecular binding motifs are increasingly utilized in 3D-printing designs, the optimization of 3D-printable inks remains largely empirical. In this thesis, we present two strategies to rationally design supramolecularly crosslinked 3D-printable hydrogels, including (1) micro-crystallization and (2) …

Covalent Adaptable Networks For Wood Coatings, Jachin Boaz Clarke

Materials Engineering

Wood swells and shrinks causing problems with seasonal humidity. Applying thick coatings of reactive finishes based on cross-linked polyurethane, epoxy, or polyesters can slow moisture-vapor exchange. However, the use of thick coatings leads to cracking and crazing sooner than thin finishes. This research proposes the addition of 3.3 mol % triazabicyclodecene, a conventionally used covalent adaptable network catalyst, in a commercially available polyester-based wood coating. The self-healing of the wood coating is tested using DMA stress relaxation and compression molding. The result from DMA renders inconclusive and compression molding indicates the novel wood coating oxidizes at elevated temperatures. The wood …

Sers For The Detection Of Trace Materials, Omari Kirkland

Dissertations, Theses, and Capstone Projects

In this dissertation are presented three projects that contribute to the body of research on SERS in the forensic, heritage, and semiconductor fields. The first project, Charge-Transfer mapping on GaN/Ag, a silver-decorated nanopillar semiconductor substrate fabricated from the GaN is used with the Raman probe Rhodamine 6 G (R6G) to map the effect of the nanofeatures on the CT resonance. The second project, in collaboration with Marco Leona from the Metropolitan Museum of Art, explores the use of AgNIFs to identify colorants used on textile fiber samples from four 19th century works of Japanese art. The final project analyzes the …

The Effect Of The Carbon Nanotubes’ Surface Area On The Morphology And Performance Of Cellulose Acetate Nanocomposite Membranes In Nanofiltration Applications, Nouran Elbadawi

Theses and Dissertations

Population increase and climate change have significantly affected the availability of fresh water for consumption. Studies by UNESCO showed that more than 28% of the world population didn’t have access to clean safe drinking water in 2020. This situation is expected to get more serious over the coming 30 years with the limited availability of natural fresh water sources. The need to find solutions from alternative non-freshwater resources for drinking or irrigation is becoming a necessity. Within the context of desalination technologies, thousands of investigations are conducted to find the cheapest most efficient way of water treatment aiming at expanding …

A Computational Study Of Adsorptive Desulfurization In Metal Organic Frameworks, Kyle Concha

Theses

Fossil fuel usage has been related to several concerns about the environment and human health. One of these concerns is related to fuels containing Organic Sulfur Compounds (OSCs) which upon burning produce hazardous compounds such as SO₂ which contributes to acid rain and affects respiratory health. Removal of these OSCs is an important field of study as it can prevent the production of SO_x compounds. One technique to remove OSCs is Adsorptive Desulfurization (ADS) in which Metal Organic Frameworks (MOFs) are potential candidates to be used as adsorbents. Two archetypal MOFs, HKUST-1 and Cu₃HHTP₂, …

P-Doped Ru-Pt Alloy Catalyst Toward High Performance Alkaline Hydrogen Evolution Reaction, Rong-Qin Huang, Wei-Ping Liao, Meng-Xuan Yan, Shi Liu, Yuan-Ming Li, Xiong-Wu Kang

Journal of Electrochemistry

Electrocatalytic water splitting represents grand promise for hydrogen fuel in modern energy equipment, and the design and fabrication of higher performance catalysts are at the central. Herein, we report the sequential phosphorus (P)-doping into ruthenium (Ru) nanoparticles (Ru-P/C) by thermal annealing of Ru nanoparticles in phosphine (PH₃) atmosphere and deposition of extremely low concentration of platinum (Pt) to obtain P-doped Ru-Pt alloy catalyst supported on carbon nanotubes (CNTs), which is denoted as (Ru-P)#Pt/C. The data by X-ray diffraction spectroscopy and transmission electron microscopy show that the Ru nanoparticles existed in the form of hexagonal close-packed (hcp) phase with …

Deep Euteceic Solvents-Assisted Synthesis Of Novel Network Nanostructures For Accelerating Formic Acid Electrooxidation, Jun-Ming Zhang, Xiao-Jie Zhang, Yao Chen, Ying-Jian Fan, You-Jun Fan, Jian-Feng Jia

Journal of Electrochemistry

Deep eutectic solvents (DESs) have been reported as a type of solvent for the controllable synthesis of metal nanostructures. Interestingly, flower-like palladium (Pd) nanoparticles composed of staggered nanosheets and nanospheres are spontaneously transformed into three-dimensional (3D) network nanostructures in choline chloride-urea DESs using ascorbic acid as a reducing agent. Systematic studies have been carried out to explore the formation mechanism, in which DESs itself acts as a solvent and soft template for the formation of 3D flower-like network nanostructures (FNNs). The amounts of hexadecyl trimethyl ammonium bromide and sodium hydroxide also play a crucial role in the anisotropic growth and …

Fe Nanoparticles Encapsulated In N-Doped Porous Carbon For Efficient Oxygen Reduction In Alkaline Media, Chun-Yan Li, Rui Zhang, Xiao-Jie Ba, Xiao-Le Jiang, Yao-Yue Yang

Journal of Electrochemistry

Rational design and synthesis of non-precious-metal catalyst plays an important role in improving the activity and stability for oxygen reduction reaction (ORR) but remains a major challenge. In this work, we used a facile approach to synthesize iron nanoparticles encapsulated in nitrogen-doped porous carbon materials (Fe@N-C) from functionalized metal-organic frameworks (MOFs, MET-6). Embedding Fe nanoparticles into the carbon skeleton increases the graphitization degree and the proportion of graphitic N as well as promotes the formation of mesopores in the catalyst. The Fe@N-C-30 catalyst showed the excellent ORR activity in alkaline solutions (E₀ = 0.97 V vs. RHE, E_{1/2 …}

Photophysical And Photochemical Processes In Small Molecules And Materials For Solar Energy Conversion, Ethan Lambert

Honors Theses

The work covered in this thesis all falls under the theme of photophysical processes after light and matter interact. Those of primary interest are Raman scattering induced vibrations and excited state dynamics probed by transient absorption spectroscopy. Small molecules are studied with Raman spectroscopy and computational chemistry. These studies unearth the shifts in vibrational frequency as a function of charge transfer or receipt and how a quantitative assay of natural orbital populations and delocalization can offer both the nature and magnitude of this charge transfer. Further, a method is presented that builds upon previous work within the academic family tree; …

Diffusion Of Ionic Liquid-Modified Polymer Nanoparticles Through Nasal Mucus, Mary Vanlandingham

Honors Theses

Mucosal barriers are a natural defense system for preventing the entry of foreign objects into the body; however, they pose as obstacles for effective drug delivery. Coated polymer nanoparticles have been proven to possess improved rates of diffusion across mucus compared to their uncoated, or bare, counterparts. When choline-based ionic liquids (ILs) are introduced to an aqueous system, their dissociation leads to an increase in solution conductivity which ultimately reduces the viscosity of mucus without significantly affecting its structure. Additionally, ILs are highly tunable, so they work well in a range of pHs and conductivities, making ILs an ideal choice …

A Synthetic Approach To The Optimization Of Silicon-Rosindolizine Swir Fluorophores, Timothy Lewis

Honors Theses

Fluorophores emitting within the near-infrared (700 – 1000 nm) or shortwave-infrared (1000 – 1700 nm) regions of the electromagnetic spectrum are of particular interest for their potential to supplement or even outright replace commonly used biological imaging techniques, such as magnetic resonance imaging and computed tomography scanning. Various characteristics make these molecules particularly appealing to researchers, such as their ease of synthetic tunability, generally low toxicity, and high solubility in biological media in comparison to other NIR- and SWIR-emissive fluorophores. Different molecular skeletons have been examined for use as the core of these imaging agents, such as squaraine, cyanine, and …

Synthesis And Characterization Of Sodium Cathode Materials, He Zhou

McKelvey School of Engineering Graduate Student Theses & Dissertations

As sodium batteries hold great promise as a next-generation energy storage device to replace lithium batteries, the development of sodium battery materials has become increasingly urgent. The current study aims to investigate two potential sodium-ion battery cathode materials, Sodium Vanadium Phosphate, and Sodium Manganese Hexacyanoferrate, optimize the experimental procedures, conduct a systematic analysis of material properties and characterization, and ultimately determine the ideal synthesis conditions for these materials.

In the first part of the study, we focused on optimizing the synthesis of Sodium Vanadium Phosphate. By investigating various synthesis conditions, such as annealing temperature, pressure, ascorbic acid content, and material …

Evaluation Of Promising Eco-Friendly Flame Retardants For Bio-Based Rigid Polyurethane Foams Based On Modified Castor Oil, Prasadi Abeysinghe Arachchilage

Electronic Theses & Dissertations

Fossil fuel derivatives in the polyurethane industry are gradually being replaced with environmentally friendly alternative bio-based resources. Vegetable-oil-based polyols are emerging bio-based resources that can decrease cost competitiveness in polyurethane markets, reduce environmental impacts, and meet the urgent need for green and sustainable development strategies. Among this, interest is the use of castor oil to make polyurethane because of its inedibility and the fact that it contains many functionalizable chemical groups. However, the poor thermal stability and low load-bearing capacity of castor-oil-based rigid polyurethane foam limits its application. Two methods were used to address these limitations: (i) more hydroxyl groups …

Electrochemical Properties Of Mof-Derived Nickel Compounds For High-Performance Supercapacitors And Electrocatalysts, Shiva Bhardwaj

Electronic Theses & Dissertations

There are various forms in which humans use energy in daily life. From applications that require a high energy density to long-term storage, the requirements for energy usage are diverse. Therefore, with the continuous increase in users worldwide, more practical energy-driven sources are required, allowing manufacturers to look toward emerging functional materials. An emerging class of functional porous materials referred to as metal-organic framework (MOF) has received considerable attention over the past two decades, partially because of their potential use in various applications, including gas storage, molecular separations, electrocatalyst, and energy devices. For example, metal oxide and hydroxide-based MOF materials …

Halide Substitution Of Ternary Bismuth Chalcogenides For Photovoltaic Applications, Thomas Boggess

Theses and Dissertations

Semiconductors play an integral part in modern society. From computing to LEDs their use is ubiquitous, and no field is more reliant on them than that of power generation. Current political movements have seen a push to decrease reliance on traditional forms of power generation, which relies on fossil fuels, to renewable sources such as solar power. However, current commercial solar panels, based on silicon, are lacking in efficiency, only reaching between 18% and 22% efficiency.¹ In recent years, materials called perovskites have been garnering significant attention as possible replacements for silicon cells due to their favorable optoelectronic properties. …

Halide Exchange And Transport In Halide Perovskite Lattices, Temban Acha Billy

Department of Chemistry: Dissertations, Theses, and Student Research

In recent years, metal-halide perovskites (MHPs) have risen quickly to prominence as promising materials across a variety of fields, from photovoltaics to optoelectronics in general. We show here a facile solution growth for creating a variety of mixed halide MAPbBr_3-xI_x crystals, which we will use to study halide exchange and transport in halide perovskites. We generated a calibration curve between the optical response and chemical composition in mixed Br/I MHPs at room temperature. All mixed Br/I MHP crystals were subjected to measurements of photoluminescence (PL) and Raman spectroscopy. A subset of mixed-halide MHP crystals exhibited multiple emission …

Biosynthesis Of Copper Nanoparticles Using Hylocereus Costaricensis Peel Extract And Their Photocatalytic Properties, Suriati Eka Putri, Netti Herawati, Ahmad Fudhail, Diana Eka Pratiwi, Sumiati Side, Abd Rahman, Susilo Sudarman Desa, Nur Ahmad, Subaer Junaedi, A. Surleva

Karbala International Journal of Modern Science

A green chemistry method was used for the first time to synthesize copper nanoparticles (Cu-NPs) using CuSO4 as a precursor and red dragon fruit (Hylocereus costaricensis) peel wasted extract as a bio-reductor. Cu-NPs produced were then used as a photocatalysts for acid orange 7 (AO7) dyes degradation. The results showed that the smallest average crystallite size of the products ranged from 8.84 - 8.86 nm, and the FCC crystal structure had a surface area of 244.38-278.85 m2g-1. Furthermore, the optimum degradation of AO7 dye occurred at a ratio of 1:3 with a percentage of 81.07% for four cycles. These findings …

Hollow Mn3o4 Nanoparticles For Catalytic Oxidation Of Alkenes In Air, Nathan R. Loutsch

Honors Thesis

Oxidized hydrocarbons (epoxides, alcohols, carboxylic acids, ketones, and aldehydes) have many uses including fuel production, pollution treatment, and chemical synthesis. These compounds can be formed by oxidizing alkenes and alkanes with the assistance of a catalyst. Heterogeneous catalysts have greater recyclability, but traditionally have lower activity and selectivity. Due to the increased relative surface area, nanomaterials can overcome some of the physical limitations. The Hoefelmeyer lab developed a new nanomaterial: hollow Mn3O4 nanoparticles. Sensitive synthetic conditions have been optimized. Due to the increased relative number of edge and corner atoms, the reactive properties of most small nanomaterials increase. Because of …

Excitation Power Dependence Of Blinking In Copper-Indium-Sulfide Quantum Dots, Nicholas Chambers

Physics Undergraduate Honors Theses

Under continuous excitation, quantum dots exhibit random transitions between fluorescent ON states and non-fluorescent OFF states --- a phenomenon known as blinking. A physical description of the mechanism responsible for blinking that applies broadly to many types of quantum dots remains under debate. We study the blinking behavior of the non-toxic CuInS2 quantum dot, a system that has seen little investigation at the single-particle level. In particular, the optical properties of CuInS2 quantum are often improved by adding ZnS to the nanoparticles, but this addition leads to complex structural-optical property relationships that are even less understood. To probe the relationship …

Developing Methods For Pattern Transfer In Photoelectrochemical Lithography, Ashlyn Descarpentrie

Chemistry & Biochemistry Undergraduate Honors Theses

The microprocessor industry has historically been driven by the goal of shrinking devices. To create features small enough to fit on such devices, photolithography has conventionally been used in the micropatterning of noble metal surfaces. Photolithography is a complicated and expensive process that involves a cleanroom, metallization processes, and photoresist. While this investment makes sense for high revenue applications, a number of microelectronic devices do not require nanometer-scale patterned features. Examples of such applications include specific types of antennae, sensing electrodes, and photocatalysts. Photolithography for these devices is thus too costly in both money and energy. The Coridan lab has …