Materials Chemistry Commons^™

Horizontally-Aligned Carbon Nanotubes Arrays And Their Interactions With Liquid Crystal Molecules: Physical Characteristics And Display Applications, Frederick Roussel, Jean-Francois Brun, Alexandre Allart, Limin Huang, Stephen O'Brien

Publications and Research

We report on the physical characteristics of horizonthally-grown Single-Walled Carbon Nanotubes (h-al-SWNT) arrays and their potential use as transparent and conducting alignment layer for liquid crystals display devices. Microscopy (SEM and AFM), spectroscopic (Raman) and electrical investigations demonstrate the strong anisotropy of h-al-SWNT arrays. Optical measurements show that h-al-SWNTs are efficient alignment layers for Liquid Crystal (LC) molecules allowing the fabrication of optical wave plates. Interactions between h-al-SWNT arrays and LC molecules are also investigated evidencing the weak azimuthal anchoring energy at the interface, which, in turn, leads to LC devices with a high pretilt angle. The electro-optical reponses of …

Chiral Magnetization Configurations In Magnetic Nanostructures In The Presence Of Dzyaloshinski-Moriya Interactions, Naoise Grisewood, John Eves, Timothy Usher, Hans-Benjamin Braun

Physics Faculty Publications

Many low-dimensional systems, such as nanoscale islands, thin films, and multilayers, as well as bulk systems, such as multiferroics, are characterized by the lack of inversion symmetry, a fact that may give rise to a Dzyaloshinskii-Moriya (DM) interaction. For sufficient strength, the DM interaction will favor spiral spin configurations of definite chirality. In order to harness such systems for applications, it is important to understand the conditions under which these spiral spin configurations form and how they can be controlled via an external field. Here, we present exact solutions of the 1D magnetization profiles in such systems for arbitrary material …

Ƴ-Selective Directed Catalytic Asymmetric Hydroboration Of 1,1-Disubstituted Alkenes, Sean M Smith, Gia L. Hoang, Rhitankar Pal, Mohammad O. Bani Khaled, Liberty S. W. Pelter, Xiao Cheng Zeng, James M. Takacs

Xiao Cheng Zeng Publications

Directed catalytic asymmetric hydroborations of 1,1-disubstituted alkenes afford ƴ

-dioxaborato amides and esters in high enantiomeric purity (90–95% ee).

Synthesis And Flame Retardant Testing Of New Boronated And Phosphonated Aromatic Compounds, Vladimir Benin, Sravanthi Durganala, Alexander Morgan

Chemistry Faculty Publications

The present report describes the preparation and use of some dimethyl terephthalate derivatives in transition metal-catalyzed coupling reactions to produce new reactive flame retardants. Dimethyl iodoterephthalate and dimethyl 2,5-diiodoterephthalate were successfully employed in the preparation of phosphonic and boronic esters and acids. The latter were tested for heat release with a microcombustion calorimeter (ASTM D7309) to determine the potential for heat release reduction of these flame retardant molecules. The results showed that the addition of boronic or phosphonic acids greatly lowered the heat release, due to a condensed phase (char formation) mechanism. Adding ester groups to the boronic acids or …

Development Of Tailor-Designed Gold-Platinum Nanoparticles Binary Catalysts For Efficient Formic Acid Electrooxidation, Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Mohamed S. El-Deab Prof, Bahgat E. El-Anadouli Prof

Chemical Engineering

The modification of a glassy carbon (GC) electrode with platinum (PtNPs) and gold (AuNPs) nanoparticles is targeted to fabricate efficient anodes for the electrooxidation of formic acid (FA). A proper adjustment of the deposition sequence of PtNPs and AuNPs could eventually enhance the electrocatalytic activity of the electrode in such a way that suppresses the CO poisoning effect during FA oxidation. The highest catalytic activity is obtained at the Au/Pt/GC electrode (with PtNPs firstly deposited on the GC electrode followed by AuNPs). This superb enhancement is quantified by comparing the relative ratio of the direct vs. the indirect oxidation peaks …

Nucleic-Acid Based Lateral Flow Strip Biosensor Via Competitive Binding For Possible Dengue Detection, Erwin P. Enriquez, Henson L. Lee Yu, Christine Marie Montesa, Nina Rosario L. Rojas

Chemistry Faculty Publications

A low-cost, simple, rapid and selective nucleic-acid based lateral flow strip biosensor (LFSB) for possible dengue viral RNA detection is described in this study. The detection is based on competitive binding, where gold nanoparticles (AuNPs), with average size of ~10 nm confirmed using UV-Vis, TEM and AFM images, are used as visualizing agents. These are bioconjugated with DNA which competitively binds with its complementary strand either in the sample or in the test line of the LFSB. The detection scheme reduces the number of probes which effectively lowers the cost for the design of the test strip. The whole test …

Surfactant-Free Hybridization Of Transition Metal Oxide Nanoparticles With Conductive Graphene For High-Performance Supercapacitor, Wen Qian, Zhiqiang Chen, Steven Cottingham, William Alexander Merrill, Natasja A. Swartz, Andrea Goforth, Tami Lasseter Clare, Jun Jiao

Chemistry Faculty Publications and Presentations

In order to improve specific capacitance and limit electrical resistance, high-quality exfoliatedgraphene decorated with transition metal (Fe, Mn, Co) oxide nanoparticles (NPs) has been successfully synthesized without the use of surfactant via a simple, general, environmentally-friendly chemical process. The specific capacitance of as-prepared graphene/Mn₃O₄ composite reach 239.6 F/g, when employed as the anode material in neutral NaCl electrolyte solutions (cf. 98.2 F/g for pristine graphene and 141.4 F/g for pure Mn₃O₄ NPs), which indicate the synergetic effects from both graphene and attached Mn₃O₄ NPs. Moreover, the high conductivity of …

Synthesis And Investigation Of The Liquid Crystalline Properties Of Polycyclic Aromatic Hydrocarbons, Joseph A. Paquette

Theses and Dissertations (Comprehensive)

In this thesis, the synthesis and liquid crystalline properties of a series of novel substituted dibenz[a,c]anthracenes is reported. Specifically, a series of hexaalkoxydibenz[a,c]anthracenes were prepared and found not to exhibit a mesophase. In contrast, when substituents are introduced on the aromatic core, columnar mesophases are observed over broad temperature ranges. A series substituted derivatives was prepared and their mesomorphic properties compared. In general, electron-withdrawing substituents promote broad mesophase temperature ranges, as do larger substituents. The liquid crystalline phase is a result of the electronic effects, size and shape of the substituents in the 10 and 13 positions.

We also synthesized …

Self-Assembling Subnanometer Pores With Unusual Mass-Transport Properties, Xibin Zhou, Guande Liu, Kazuhiro Yamato, Yi Shen, Ruixian Cheng, Xiaoxi Wei, Wanli Bai, Yi Gao, Hui Li, Yi Liu, Futao Liu, Daniel M. Czajkowsky, Jingfang Wang, Michael J. Dabney, Zhonghou Cai, Jun Hu, Frank V. Bright, Lan He, Xiao Cheng Zeng, Zhifeng Shao, Bing Gong

Xiao Cheng Zeng Publications

A long-standing aim in molecular self-assembly is the development of synthetic nanopores capable of mimicking the mass-transport characteristics of biological channels and pores. Here we report a strategy for enforcing the nanotubular assembly of rigid macrocycles in both the solid state and solution based on the interplay of multiple hydrogen-bonding and aromatic π − π stacking interactions. The resultant nanotubes have modifiable surfaces and inner pores of a uniform diameter defined by the constituent macrocycles. The self-assembling hydrophobic nanopores can mediate not only highly selective transmembrane ion transport, unprecedented for a synthetic nanopore, but also highly efficient transmembrane water permeability. …

Mesoporous Functionalized Materials For Post-Combustion Carbon Dioxide Capture., Kolade Omoniyi Ojo

Electronic Theses and Dissertations

Novel highly functionalized hybrid organic-inorganic materials were synthesized by polycondensation of bis[3-(trimethoxysilyl)propyl]amine in presence of cationic and anionic surfactants. Reaction media strongly affected gelation time. Thus, in basic media gelation occurred immediately while acid increased gelation time. Material structures were studied by IR spectroscopy, porosimetry, XRD, and SAXS methods. In spite of the absence of an inorganic linker, obtained bridged silsesquioxanes had mesoporous structure. A material prepared in the presence of dodecylamine as a template had higher surface area and narrow pore size distribution while the use of sodium dodecylbenzene sulfate resulted in formation of mesopores with wide size ranges. …

Synthesis Of An Antimicrobial Textile Coating, William M. Morris

Chemistry and Biochemistry

A titania nanosol was synthesized and coated onto nylon/cotton blended textile substrates. The substrates were characterized via SEM for adhesion and nanoparticle formation, then subjected to antimicrobial efficacy tests. The titania nanosol was successfully coated on to textiles samples. Particles were observed to be around 2 by 3 micrometers and formed between the interstitial space of textile fibers. Although larger than typical nanoparticles, the coatings exhibited what seemed to be antimicrobial activity. Titania nanosol coated textile samples were subjected to Kirby Bauer Assay in the presence of S. aureus. The coated textile sample exhibited an inhibition of growth around its …

The Tetrafluoroborate Salt Of 4-Methoxybenzyl N-2-(Dimethylamino)Ethyl-N-Nitrosocarbamate: Synthesis, Crystal Structure And Dft Calculations, Helene Hedian, Vladimir Benin

Chemistry Faculty Publications

The tetrafluoroborate salt of 4-methoxybenzyl N-2-(dimethylamino)ethyl-N-nitrosocarbamate was prepared in two steps, via the corresponding carbamate. Its crystal structure is monoclinic, space group P21/c. The unit cell dimensions are: a = 19.499(8) Å, b = 5.877(3) Å, c = 15.757(7) Å, α = 90°, β = 110.019(7)°, γ = 90°, V = 1696.5(12) Å3, Z = 4. The structure exhibits an unexpected, pseudo-gauche conformation with respect to the C2–C3 bond, due to a stabilizing hydrogen bond between the carbonyl oxygen (O1) and the hydrogen atom at the trialkylammonium center (H3n), with a distance between them of …

Electrochemistry Of Pani/Metal Composites In Basic Solutions, Tamthinhan Quy

UNLV Theses, Dissertations, Professional Papers, and Capstones

Polyaniline (PANI) has been extensively investigated due to its unique conductivity, which is primarily dependent on the oxidation state of the material and the solution pH. PANI is an insulator when it is oxidized, and the solution pH exceeds four. Numerous attempts to extend PANI's conductivity to neutral and alkaline environments have been unsuccessful. However, our previous study has demonstrated that PANI/Pd composite is conductive and catalytically active in a basic solution, pH ∼ 12. Therefore, the conductivity and the electrochemical properties of PANI composites including PANI/Au, PANI/Pd and PANI/Pt were evaluated in basic solutions. The fundamental studies of PANI/metal …

The Investigation Of Asphaltene-Naphithenic Acid And Asphaltene-Surface Interactions, David Tristan Heaps

Dissertations

Asphaltenes represent a ubiquitous problem in the oil industry due to their adverse effects on recovery, production, and processing equipment. These problems have affected oil companies throughout the world, resulting in significant financial losses. In order to expand the existing body of knowledge related to asphaltenes, we have examined how the presence of naphthenic acids contributes to the particle aggregation and sedimentation behavior of asphaltene suspensions as well as how the physics and chemistry of a substrate affect asphaltene adsorption/deposition.

The flocculation of asphaltenes in the presence of naphthenic acids was investigated using dynamic light scattering (DLS), near-infrared spectroscopy (NIR), …

Spectroscopic Methods Of Process Monitoring For Safeguards Of Used Nuclear Fuel Separations, Jamie Lee Warburton

UNLV Theses, Dissertations, Professional Papers, and Capstones

To support the demonstration of a more proliferation-resistant nuclear fuel processing plant, techniques and instrumentation to allow the real-time, online determination of special nuclear material concentrations in-process must be developed. An ideal materials accountability technique for proliferation resistance should provide nondestructive, realtime, on-line information of metal and ligand concentrations in separations streams without perturbing the process. UV-Visible spectroscopy can be adapted for this precise purpose in solvent extraction-based separations.

The primary goal of this project is to understand fundamental URanium EXtraction (UREX) and Plutonium-URanium EXtraction (PUREX) reprocessing chemistry and corresponding UV-Visible spectroscopy for application in process monitoring for safeguards. By …

Preparation And Characterization Of Biomimetic Hydroxyapatite-Resorbable Polymer Composites For Hard Tissue Repair, Kristopher R. Hiebner

Department of Chemistry: Dissertations, Theses, and Student Research

Autografts are the orthopedic “gold standard” for repairing bone voids. Autografts are osteoconductive and do not elicit an immune response, but they are in short supply and require a second surgery to harvest the bone graft. Allografts are currently the most common materials used for the repair of segmental defects in hard tissue. Unlike autografts, allografts can cause an undesirable immune response and the possibility of disease transmission is a major concern. As an alternative to the above approaches, recent research efforts have focused on the use of composite materials made from hydroxyapatite (HA) and bioresorbable polymers, such as poly-L-lactide …

Preparation And Application Of Macroporous Ato/Sio2 Electrode In Electrochemical Degradation Of 4-Chlorophenol, Zhang-Lin Chai, Rui-Feng Zhang, Tong-Hu Xiao, Yun-Xiao Liang

Journal of Electrochemistry

The macroporous ATO/SiO₂ materials were prepared through multiple steps of hydrolysis deposition in ethylene glycol and acetonitrile mixed solutions of SnCl₂/SbCl₃ and subsequent calcination at high temperature. The structures of the obtained materials were characterized by means of SEM and XRD. The results showed that the nano-ATO chemically deposited on the SiO₂ support underwent well-controlled aggregation and recrystallization to form a sandwich structure (ATO-SiO₂-ATO). Through four times loading of ATO the volume resistivity and the specific surface area reached 10·cm and 77 m²·g^-1, respectively. The oxygen evolution potential on …

Electrochemical Behaviors Of Hydroquinone On Polypyrrole/Stab-Nammt/Gc Electrode, Rong Li, Jian Xiong, Wei-Qiong Zhu, Yuan-Yuan Han, Jin Xu, Xiao-Ying He

Journal of Electrochemistry

The PPy/STAB-MMT/GC electrode was made using montmorillonite modified by STAB and polypyrrole (PPy). The electrochemical behaviors of hydroquinone on the PPy/STAB-MMT/GC electrode were researched by cyclic voltammetry and square wave stripping voltammetry (SWSV). The results showed that the electrode reaction occurred on the hydroquinone electrode was controlled by diffusion in PBS (pH=6.0). The number of electron transfer was equal to the number of protons (n=m=1) with the effective area of PPy/STAB-MMT/GC electrode Aeff=0.031 cm². Under the optimized conditions, the linear response of peak current in SWSV with the concentration of hydroquinone in a range of 8.0×10^-6~8.0×10 …

Electroless Plating Silver Without Pd Activation On Polyamide Fabrics And Its Properties, Yun Meng, Ya-Ping Zhao, Zai-Sheng Cai

Journal of Electrochemistry

Silver was deposited on the surface of polyaniline coated polyamide fabrics by electroless plating without using conventional palladium chloride solution as activator．Effects of electroless plating conditions such as the concentrations of silver nitrate, reducing agent glucose, complexing agent ammonium hydroxide, sodium hydroxide in the bath, as well as the depositing time and bath temperature on the rate of metal deposition and the square resistance were studied. Optimum electroless plating conditions were: 30℃, 50 min, with silver nitrate 12 g/L, ammonium hydroxide 100 ml/L, glucose 2.8 g/L, sodium hydroxide 8 g/L. Meanwhile, effects of the intermediate polyaniline layer on the metal …

Preparation And Capacitance Characteristics Of Nickel Oxide Electrode With Mesh-Like Structure, Hui Xu, Zhen-Jun Peng, Dong-Hong Guo, Jun-Ling Li

Journal of Electrochemistry

The mesh-like structure of NiO electrode was obtained by first preparing the precursors via hydrothermal process using nickel sulfate and carbamide as reactants, sodium hexametaphosphate as a surfactant, and followed by calcination of the precursors at 400 ℃. The structure, morphology and capacitance characteristics of NiO electrode were characterized by XRD, SEM and constant current charge-discharge testing techniques. The effects of hydrothermal temperatures on the electrochemical properties of NiO electrode were investigated. The results showed that the better property of nickel oxide was obtained when the mole ratio of nickel to urea was 1:4 and the hydrothermal temperature was 140℃. …