Inorganic Chemistry Commons^™

N–((2–Acetylphenyl)Carbamothioyl)Benzamide: Synthesis, Crystal Structure Analysis, And Theoretical Studies, Akin Oztaslar, Hakan Arslan

Karbala International Journal of Modern Science

N–((2–Acetylphenyl)carbamothioyl)benzamide has been synthesized and characterized. The molecular conformation of the investigated compound is stabilized by C16–H16B⋅⋅⋅O2ⁱ (i: 1+x, y, z) intermolecular and C14–H14⋅⋅⋅S1, N2–H2⋅⋅⋅O2, and N2–H2⋅⋅⋅O1 intramolecular H–bonds. All DFT calculations have been implemented at the B3LYP level with the 6–311G(d,p) basis set. The optimized molecular structure parameters have been compared with the experimental one in the solid phase. The energy gap, global chemical reactivity descriptor parameters, MEP, Fukui functions, DoS, NLO, and NBO analysis were also computed and investigated. The intermolecular interactions and their energies are evaluated using Hirshfeld surface and energy framework analyses. To determine …

Methods Of Magneto-Optical Spectroscopy And Analysis For Porphyrins And Polymer Thin-Films, Emigdio E. Turner

Chemistry and Chemical Biology ETDs

This dissertation describes the construction of two high precision magneto-polarimeters for performing Faraday rotation and Magnetic Circular Dichroism (MCD) measurements of polymer thin-films. There is a focus in materials science on the development of thin-film magneto-optically active materials. These materials could allow for the construction of a thin-film optical diode, an important device for next-generation photonic technology. Upon completion of the Faraday rotation spectrometer, two publications were generated from Faraday rotation measurements of novel polymer thin-film materials.

With growing interest by materials scientists in magneto-optically active transition-metal containing materials, an MCD spectrometer was constructed to study these materials. This spectrometer …

Tio2 Crystallization At Room Temperature And Preparation Of Transparent Carbon Counter Electrode For Low-Cost Dye-Sensitized Solar Cells, Muhammad Iqbal Syauqi, Afiten Rahmin Sanjaya, Mohammad Jihad Madiabu, Munawar Khalil, Jarnuzi Gunlazuardi

Makara Journal of Science

We developed a low-cost dye-sensitized solar cell (DSSC) using TiO₂ fabricated via rapid breakdown anodization (RBA) and ultrafast room-temperature crystallization (URTC). The prepared TiO₂ was deposited on a self-made fluorine-doped tin oxide (FTO) conductive glass, and the FTO/TiO₂ system was sensitized using curcumin dye. The DSSC was constructed by sandwiching the FTO/TiO₂/curcumin electrode with an I⁻/I₂ electrolyte and a transparent carbon counter electrode prepared using a liquid–liquid interface system. The characterization results showed that the TiO₂ freshly prepared via URTC was transformed into an anatase crystalline phase, which exhibited a 3.10 …

Sers For The Detection Of Trace Materials, Omari Kirkland

Dissertations, Theses, and Capstone Projects

In this dissertation are presented three projects that contribute to the body of research on SERS in the forensic, heritage, and semiconductor fields. The first project, Charge-Transfer mapping on GaN/Ag, a silver-decorated nanopillar semiconductor substrate fabricated from the GaN is used with the Raman probe Rhodamine 6 G (R6G) to map the effect of the nanofeatures on the CT resonance. The second project, in collaboration with Marco Leona from the Metropolitan Museum of Art, explores the use of AgNIFs to identify colorants used on textile fiber samples from four 19th century works of Japanese art. The final project analyzes the …

Microwave Synthesis And Photophysical Characterization Of Heteroleptic Iridium Complexes For Applications In Oleds And Lecs, Allyson Dixon

Seton Hall University Dissertations and Theses (ETDs)

A series of heteroleptic, iridium-based ionic transition metal complexes (ir-iTMCS), with the purpose to serve as potential components of OLED and LEC devices, were synthesized through a green, combinatorial-based approach. This work utilized a microwave reactor in order to bring our research into closer alignment with the tenets of green chemistry. The aim of this research was to assess the effects of structural differences, specifically steric crowding, on the photophysical characteristics of the complexes. The radiative quantum efficiencies (Φ_f) and excited state lifetimes (τ ) of the series of Ir-iTMCs were investigated. The rates of radiative (k_{r …}

Photophysical And Photochemical Processes In Small Molecules And Materials For Solar Energy Conversion, Ethan Lambert

Honors Theses

The work covered in this thesis all falls under the theme of photophysical processes after light and matter interact. Those of primary interest are Raman scattering induced vibrations and excited state dynamics probed by transient absorption spectroscopy. Small molecules are studied with Raman spectroscopy and computational chemistry. These studies unearth the shifts in vibrational frequency as a function of charge transfer or receipt and how a quantitative assay of natural orbital populations and delocalization can offer both the nature and magnitude of this charge transfer. Further, a method is presented that builds upon previous work within the academic family tree; …

Investigating Reactivity Of Artificial Copper Peptides With Small Molecules, Allyson Bryant

Honors Theses

The design of artificial enzymes has been a topic of significant interest in the field of biochemistry, as they can provide new opportunities for catalytic processes and drug development. De novo protein design has emerged as a promising approach to create such enzymes, and the study of metalloproteins, particularly copper-binding peptides, has become a focus of this research. This thesis investigates the reactivity of a mutated copper-binding peptide, I5A-3SCC, with oxygen and its implications in the development of artificial enzymes.

The parent peptide, 3SCC, was mutated by replacing Isoleucine residues with smaller Alanine side chains, which was hypothesized to enhance …

Photocatalyzed Hydrogen Evolution Using Nickel-Bound Metallothionein Protein, Windfield Swetman

Honors Theses

The continued burning of fossil fuels is not only a cause of increasing deterioration of the environment but also a financially unsustainable source of energy. Advances in energy production must be investigated to avoid the long-term effects of this current main source of energy. One of the avenues being explored is the use of metalloenzymes to catalyze hydrogen evolution via water splitting that occurs during the reductive half of artificial photosynthesis. Metalloenzyme catalysts with a single Ni(Cys)₄ active site have been previously studied, and this study explores the possibility of increasing hydrogen production by using metalloenzyme catalysts with multiple …

Design And Synthesis Of Dinucleating Phthalazine-Based Ligands Toward Bimetallic Ruthenium Catalysts For Water Oxidation, Alex Bromley

Honors Theses

Two synthetic pathways were developed to construct dinucleating ligands towards the synthesis of bimetallic ruthenium-based water oxidation catalysts. The motivation for this work stems from earlier observations of related ligands that are susceptible to oxidative decomposition. The design pursued here incorporates a phthalazine core into the dinucleating ligand, which, we hypothesize, will prevent the previously established cleavage of a pyridazine unit at the same position. The ligand precursors involved in the multi-step syntheses are characterized by Nuclear Magnetic Resonance (NMR) spectroscopy. Synthetic protocols were refined to ensure reproducibility. In addition, our hypothesis for which of the two target ligands will …

Halide Substitution Of Ternary Bismuth Chalcogenides For Photovoltaic Applications, Thomas Boggess

Theses and Dissertations

Semiconductors play an integral part in modern society. From computing to LEDs their use is ubiquitous, and no field is more reliant on them than that of power generation. Current political movements have seen a push to decrease reliance on traditional forms of power generation, which relies on fossil fuels, to renewable sources such as solar power. However, current commercial solar panels, based on silicon, are lacking in efficiency, only reaching between 18% and 22% efficiency.¹ In recent years, materials called perovskites have been garnering significant attention as possible replacements for silicon cells due to their favorable optoelectronic properties. …

Halide Exchange And Transport In Halide Perovskite Lattices, Temban Acha Billy

Department of Chemistry: Dissertations, Theses, and Student Research

In recent years, metal-halide perovskites (MHPs) have risen quickly to prominence as promising materials across a variety of fields, from photovoltaics to optoelectronics in general. We show here a facile solution growth for creating a variety of mixed halide MAPbBr_3-xI_x crystals, which we will use to study halide exchange and transport in halide perovskites. We generated a calibration curve between the optical response and chemical composition in mixed Br/I MHPs at room temperature. All mixed Br/I MHP crystals were subjected to measurements of photoluminescence (PL) and Raman spectroscopy. A subset of mixed-halide MHP crystals exhibited multiple emission …

Biosynthesis Of Copper Nanoparticles Using Hylocereus Costaricensis Peel Extract And Their Photocatalytic Properties, Suriati Eka Putri, Netti Herawati, Ahmad Fudhail, Diana Eka Pratiwi, Sumiati Side, Abd Rahman, Susilo Sudarman Desa, Nur Ahmad, Subaer Junaedi, A. Surleva

Karbala International Journal of Modern Science

A green chemistry method was used for the first time to synthesize copper nanoparticles (Cu-NPs) using CuSO4 as a precursor and red dragon fruit (Hylocereus costaricensis) peel wasted extract as a bio-reductor. Cu-NPs produced were then used as a photocatalysts for acid orange 7 (AO7) dyes degradation. The results showed that the smallest average crystallite size of the products ranged from 8.84 - 8.86 nm, and the FCC crystal structure had a surface area of 244.38-278.85 m2g-1. Furthermore, the optimum degradation of AO7 dye occurred at a ratio of 1:3 with a percentage of 81.07% for four cycles. These findings …

Photodynamic Therapy Agents: The Power Of Mjöllnir To Eradicate Cancer, Sidney M. Hopper

Honors College Theses

After its discovery back in the 1900s, photosensitizers became a critical study for potential treatments and cures for medical issues, including cancer. It was discovered that porphyrins appeared to target and accumulate in proliferating cells, and to reach the cells, a certain wavelength of light with maximum absorbance associated with the porphyrin was necessary to achieve cell death. Photodynamic therapy involves making use of porphyrins or metalloporphyrins as activators when exposed to such light. When activated, these compounds generate reactive oxygen species (ROS), such as HO- or O2-, which can react with nucleic acids found in DNA and RNA. In …

Hollow Mn3o4 Nanoparticles For Catalytic Oxidation Of Alkenes In Air, Nathan R. Loutsch

Honors Thesis

Oxidized hydrocarbons (epoxides, alcohols, carboxylic acids, ketones, and aldehydes) have many uses including fuel production, pollution treatment, and chemical synthesis. These compounds can be formed by oxidizing alkenes and alkanes with the assistance of a catalyst. Heterogeneous catalysts have greater recyclability, but traditionally have lower activity and selectivity. Due to the increased relative surface area, nanomaterials can overcome some of the physical limitations. The Hoefelmeyer lab developed a new nanomaterial: hollow Mn3O4 nanoparticles. Sensitive synthetic conditions have been optimized. Due to the increased relative number of edge and corner atoms, the reactive properties of most small nanomaterials increase. Because of …

Excitation Power Dependence Of Blinking In Copper-Indium-Sulfide Quantum Dots, Nicholas Chambers

Physics Undergraduate Honors Theses

Under continuous excitation, quantum dots exhibit random transitions between fluorescent ON states and non-fluorescent OFF states --- a phenomenon known as blinking. A physical description of the mechanism responsible for blinking that applies broadly to many types of quantum dots remains under debate. We study the blinking behavior of the non-toxic CuInS2 quantum dot, a system that has seen little investigation at the single-particle level. In particular, the optical properties of CuInS2 quantum are often improved by adding ZnS to the nanoparticles, but this addition leads to complex structural-optical property relationships that are even less understood. To probe the relationship …

Carbon Dioxide Reduction On Large Area Liquid Metal Gallium-Indium Electrocatalysts, Thomas Hollis

Chemistry & Biochemistry Undergraduate Honors Theses

Carbon dioxide (CO₂) is widely known as a greenhouse gas that contributes to global warming due to the burning of fossil fuels. The carbon dioxide reduction reaction (CO₂RR) is widely studied to reutilize CO₂ to useful products, including methane, ethane, and carbon monoxide. This project studies the use of liquid metal gallium-indium as an electrocatalyst to perform CO₂ reduction to carbon monoxide (CO) or possibly solid carbon in various solutions. Gallium-indium is characterized and studied through its “wetting” properties and adhesion to substrate foil through the measurement of contact angles inside solution. These liquid …

Supramolecular Pi-Donor/Acceptor Arrays Based On Redox-Active Metal-Organic Coordination Assemblies, Paola Benavides

All Dissertations

Coordination-driven self-assembly is an attractive strategy for constructing thermodynamically stable supramolecular coordination complexes, ranging from discrete metallacycles and cages to infinite coordination polymers and metal-organic frameworks for a variety of applications.

Chapter 1 discusses strategies for preparing supramolecular charge-transfer π-donor/acceptor assemblies and their potential applications.

Chapter 2 demonstrates that tricomponent self-assembly method, which was believed to yield 3D-cages, based on tetrapyridyl porphyrin (M’TPP, M’ = Zn or H₂), dicarboxylate ligands (XDC), and caped cis-Pt(II) corners, actually yields 2D-bowties featuring an M’TPP core and two parallel XDC linkers held together by four heteroligated PtII(N,O) corners. The 2D-bowties showed …

Designing Noncentrosymmetric Multifunctional Materials, Ebube Oyeka

All Dissertations

Noncentrosymmetric (NCS) materials with crystal lattices lacking spatial inversion symmetry display a wide range of exciting functionalities. This dissertation covers two classes of functional NCS materials: magnetic skyrmion-host compounds and multifunctional materials. Magnetic skyrmion and multifunctional materials combining optical and magnetic responses are providing avenues for developing and optimizing the performance of electronic devices that can have uses in memory storage, laser technology, medicine, sensors, etc. The formation of skyrmions is driven by asymmetric Dzyaloshinskii–Moriya (DM) interaction facilitated by broken spatial inversion symmetry and large spin-orbit coupling (SOC), while multiple functionalities arise when spin carriers and optical chromophores are optimally …

Synthesis Of A Phenyl Substituted Zinc Dipyrrin Complex For The Purpose Of Analyzing Aromatic Substitutions On The Characteristics Of Compounds Of This Class, Kole Owen

Undergraduate Honors Theses

The field of photochemistry is as innovative in development as it is broad in application. However, utilization of energy from the sun’s electromagnetic radiation remains secondary to the combustion of fossil fuels for the global energy consumption. This is neither a sustainable nor renewable system, and it has contributed to a major decline in the health of our global environment as the greenhouse gases emission has led to an incline in global temperatures and ocean acidity. To develop effective ways to utilize solar energy, experimental effort is being directed towards the understanding of photosensitizers, molecules which absorb solar radiation and …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …