Dental Materials Commons^™

Effect Of Smoking And Finishing/Polishing On Roughness Of Nanohybrid-Composite, Sara Adel Botros, Mohamed Salama Dr., Fatma Makkeyah Ass. Dr., Mohamed Shamel Ass. Prof., Mahmoud Ankily Ass. Prof.

Dentistry

To evaluate effect of conventional cigarette and heated tobacco product smoking and finishing/polishing protocol on surface roughness of a nanohybrid composite. Thirty-six discs (6mm diameter/2mm thickness) fabricated from nanohybrid composite (Palfique LX5, Tokuyama, Japan) were assigned to 6 groups according to: tobacco product (conventional cigarette/LM, Philip Morris International Inc., Egypt; and heated tobacco/Heets, Russet, Philip Morris International Inc., Italy); and finishing/polishing protocol (control /discs cured against Mylar strip; finishing discs/Diamond Master Kit, FGM, Brazil; two-step polishing system/DIACOMP PLUS TWIST, EVE, Germany). Prior to finishing/polishing protocols, all specimens were wet ground with medium grit finishing stone (komet, Germany) as baseline. Following …

Influence Of Smoking And Finishing/Polishing On Composite Color Stability, Mohamed Samy Salama Dr., Sara Adel Botros, Fatma Makkeyah Ass. Dr., Mahmoud Ankily Ass. Prof., Mohamed Shamel Ass. Prof.

Dentistry

To assess the influence of conventional cigarette and heated tobacco product smoking and finishing/polishing systems on color stability of a nanohybrid composite. Thirty-six discs (2mm thickness/6mm diameter) fabricated from nanohybrid composite (Palfique LX5, Tokuyama, Japan) were divided to 6 groups according to: tobacco product (conventional cigarette/LM, Philip Morris International Inc., Egypt; and heated tobacco/Heets, Russet, Philip Morris International Inc., Italy); and finishing/polishing system (control /discs cured against Mylar strip; finishing discs system/Diamond Master Kit, FGM, Brazil; two-step polishing system/DIACOMP PLUS TWIST, EVE, Germany). All specimens were wet ground with medium grit finishing stone (komet, Germany) as baseline before performing finishing …

Comparative Evaluation Of Tooth Enamel Surface Microhardness Exposed To Novel Modified Casein Phosphopeptide Amorphous Calcium Phosphate, Apf Gel And Gc Tooth Mousse, P Rahmath Meeral, Indumathy Pandiyan, Meignana Arumugham

Journal of Dentistry Indonesia

Objective: The acidic pH of remineralizing agents is beneficial in etching the enamel to facilitate increased remineralization. This study aims to modify the pH of Casein Phosphopeptide Amorphous Calcium phosphate to acidic and evaluate the enamel surface microhardness exposed to acidified CPP ACPF, acidulated phosphate fluoride (APF gel), and conventional CPP ACPF. Methods: The pH of conventional CPP ACPF (GC Tooth Mousse) is acidified. 24 tooth samples were assigned into three groups receiving as follows: Group 1 (n = 8) acidified CPP ACPF, Group 2 (n = 8) APF gel, and Group 3 (n = 8) CPP ACPF for four …

Esthetic Management Of Maxillary Anteriors With Complicated And Uncomplicated Fractures Using Different Fragment Reattachment Approaches, Lavanya A, Rajendra Kumar Tewari, Sharique Alam

Journal of Dentistry Indonesia

Appropriate management of anterior tooth fracture restores the function and aesthetics and provides a positive psychological impact for the patient. One of the most conservative approaches for such a restoration is reattachment; if a fracture fragment remains attached to the tooth and is available, as in young patients, immediate reporting helps preserve the vitality and long-term defense mechanism. Objective: This case report provides two cases with varied approaches for the management of complicated and uncomplicated crown fractures using reattachment procedures. Case report: During the clinical examination, the first case described the management of an uncomplicated fracture using the …

Resin-Build-Up As A Direct Monoblock Concept For Root Canal Dentin, Core, And Crown Restoration On Anterior Endodontically Treated Tooth, Citra Kusumasari, Takashi Hatayama, Junji Tagami, Yasushi Shimada Prof.

Journal of Dentistry Indonesia

The long-term clinical performance of restoration in endodontically treated teeth (ETT) is an essential yet complicated strategy to achieve it. A resin-build-up tooth with higher elastic moduli is a minimally invasive strategy to decrease the risk of catastrophic root fracture. Additionally, intracanal resin composite anchorage simplifies the restorative procedure and increases the bonding. Objective: This case report describes a resin-build-up tooth restoration using the direct monoblock concept to replace a failed metal post and core and porcelain fused to metal (PFM) crown on the maxillary right central incisor. Case report: A 50-year-old man attended a dental university hospital …

Developing An Ordered Logistics Regression Model For Denture Hygiene Among Elderly In Residential Care Homes, Wan Muhamad Amir W Ahmad, Ruhana Hasan, Mohamad Nasarudin Adnan, Farah Muna Mohamad Ghazali, Hazik Bin Shahzad, Nor Azlida Aleng, Mohamad Shafiq Mohd Ibrahim

Journal of Dentistry Indonesia

With a global aging population, the oral hygiene of elderly individuals in institutional settings requires unique management. Maintaining adequate denture hygiene is a critical aspect of their overall well-being, while neglecting denture hygiene can lead to various oral health issues, malnutrition, and further impacting their overall health. Objective: This paper aims to provide a preliminary overview of denture hygiene care among the elderly using an ordered logistics model. Methods: Data was obtained from 174 participants in two government institutional homes in Malaysia. The Principle Components Analysis (PCA) was used to identify significant variables and an ordered logistic model …

Minimally Invasive Treatment Of Molar Incisor Hypomineralization Without Using Burs: Experiences Via A Case Series In Vietnam, Võ Truong Nhu Ngoc, Nguyen Phương Huyen, Le Khả Anh, Phan Thi Thu Hang, Hoang Kim Loan, Ta Thành Dong

Journal of Dentistry Indonesia

Mild form of molar-incisor hypomineralization (MIH) on anterior teeth are posing great challenges to dental practitioners as it can have a huge aesthetic impact. In terms of deep MIH-related lesion below the healthy enamel, highly invasive methods for approaching the lesion body and removing the entire hypomineralized enamel using burs could lead to failures including aesthetic problems and even further tooth structure damage to the affected teeth. Case report: To resolve t his issue, we have proposed a modified resin infiltration technique based on the minimally invasive philosophy. In this study, we would like to report three specific cases …

Contents Of Vol. 31, No.2, August 2024, Dr. Yuniardini Septorini Septorini Wimardhani

Journal of Dentistry Indonesia

This is the Cover and the Contents of the Vol. 31 No. 2 2024

Clinical Features Of Anterior Teeth Affected By Molar Incisor Hypomineralization And Treatment Experiences Using Transilluminated Light: A Cross-Sectional Study, Phạm Thanh Ha, Nguyễn Phương Huyen, Phạm Kim Thanh, Lương Minh Hang, Trần Tuấn Anh, Võ Như Trương Ngoc, Lê Khả Anh, Trần Anh Tuan, Tạ Thành Dong

Journal of Dentistry Indonesia

Classification and resin infiltration treatment of MIH-related permanent anterior teeth are increasingly receiving attention nowadays. Objective: The study aims to evaluate the characteristics of these teeth; and to assess factors regarding treatment. Methods: A cross-sectional study was conducted using transilluminated and reflected light photographs, and the lesion was classified according to its color, size, type, heterogeneity and surface integrity. The data were analyzed using a chi-square test and multivariate logistic regression analysis to evaluate enamel craze lines (ECL), post-eruptive breakdown (PEB), and treatment procedures. Results: 73 teeth from 46 patients were included, in which 53 teeth had been treated. Size …

Assessment Of Mandibular Incisive Canal And Anterior Loop In Cone Beam Computed Tomography In Vietnamese Mature Patients: A Retrospective Study, Anh Kha Le, Thao Phuong Tran, Tra Thu Nguyen, Loc Nguyen Gia Pham, Trung Thanh Nguyen, Viet Hoang Do

Journal of Dentistry Indonesia

Objective: This study aimed to assess the anatomical length of the mandibular incisive canal and anterior loop and the distance to surrounding structures. Methods: Our study was conducted on 70 cone beam computed tomography (CBCT) films of 70 Vietnamese adult outpatients (40 females, 30 males) at Hanoi Medical University, Vietnam. T-test was applied to assess the difference between the two sides and genders. Results: The mean length of the mandibular incisive canal (MIC) was 12.83 ± 5.13 mm. The anterior loop (AL) prevalence was 62.86%, with an average length of 2.37 ± 0.90 mm. The difference between the right and …

Hyaluronic Acid In Managing Deep Residual Pockets In Stage Iii-Iv Periodontitis: A Randomized Controlled Trial, Mohamad Adib Jaafar, Esther Voo Vui Ching, Sharul Nisha Ali, Jeyanthi Subramaniam, Yuhaniz Ahmad Yaziz

Journal of Dentistry Indonesia

Objective: The purpose of this study was to determine the adjunctive clinical effect of hyaluronic acid (HA) in the non-surgical treatment of subjects with residual pockets (≥ 6 mm) at the maintenance phase. Methods: 36 systemically healthy subjects in the periodontal maintenance phase were included in this 3-month randomized clinical trial. Subjects received a course of full-mouth, scaling and root debridement (SRD). In the test group (n = 18), HA 0.8% was applied subgingivally immediately after SRD. The control group (n = 18) was treated with SRD only. Subjects in both groups were required to apply HA 0.2% …

Role Of Titanium-Reinforced Platelet-Rich Fibrin In Periodontal Tissue Regeneration-A Systematic Review, Bhavya Manchala, Anurag Teju, Mohan Kumar Pasupuleti, Gautami S Penmetsa, Sruthima Gottumukkala, Venkata Lakshmi

Journal of Dentistry Indonesia

Objective: The objective of the study is to demonstrate the efficacy of Titanium reinforced platelet-rich fibrin (T-PRF) as the sole biomaterial amongst the biologics in periodontal regeneration of both soft and hard tissues. Methods: A PUBMED database search is conducted from August 2013 to August 2023. Only original articles, including Randomized controlled clinical trials, cross-sectional studies, prospective studies, and case-control studies, were included. The studies will be analyzed regarding the outcome of the association between T-PRF and periodontal regeneration of both hard and soft tissue. Results: From 35 articles identified, 8 RCTs were included. The use of …

Avicennia Marina Mangrove Plant Mediated Selenium Nanoparticles And Their Therapeutic Activity Against Oral Pathogens And Other Biological Properties, Kannan Kamala, Pitchiah Sivaperumal, Dhanraj Ganapathy

Journal of Dentistry Indonesia

In the last few decades nanoparticles are widely used in the control of many pathogenic bacteria, fungi, viruses, and cancer growth both in-vitro and in-vivo. A marine plant of Avicennia marina is widely used in traditional medicine for diabetes, inflammation and skin diseases. Objective: In general Avicennia marina has been used as a traditional medicine to treat various diseases and it has shown significant inhibition against various pathogen and the formation of free radicals. Also, the plant A.marina mediated selenium nanoparticles has therapeutic activity has promising to develop biocompatible new cost effective treatment for various oral diseases. Methods: …

Remineralization Potential Of Grape Seed Extract On Artificial Enamel Caries Lesions, Serif Alpcan Ozden, Esra Oz

Journal of Dentistry Indonesia

Objective: This study aimed at a comparative analysis of the remineralization potential of grape seed extract (GSE) alone, together with casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and/or acidulated phosphate fluoride (APF). Methods: The samples were randomly divided into seven groups according to the treatment used: 25% GSE, 1.23% APF (Gelato APF gel), and CPP-ACP (GC Tooth Mousse). The samples in group 7 received no treatment as a control group. All specimens were subjected to pH cycling for two weeks. Surface microhardness analyses were performed at baseline, after demineralization and remineralization. Data were analyzed using one-way analysis of variance (ANOVA), …

Endodontic Microsurgery Using Dynamic Navigation And Trephine Burs, Trenton Smith, Sameer Jain, Jeffery Nick Sanders, Michael Block, Mark Odom, Albert F. Mcmullen

School of Dentistry Faculty Publications

Objectives: The use of the surgical operating microscope, CBCT imagining, biocompatible filling materials and ultrasonic instruments have improved the success and predictability of apical surgery. Despite these advances, more accurate and precise techniques for creating osteotomies and root-resections (apicoectomies) have not been widely adopted. This study highlights how dynamic navigation systems (DNS) can help avoid unnecessary dentin removal and “mitigate iatrogenic errors” such as root perforation. Methods: A total of 56 root-end resections were planned and completed on two sets of identical TrueJaw Endosurg models (DE Labs, Santa Barbra, CA, USA). One set of maxillary and mandibular jaws were used …

Stratasys Printed 3-D Mandibular Molar With Tooth Anatomy And Texture, M. Austin White, Charles E. Taylor, Edwin Kee, Albert F. Mcmullen

School of Dentistry Faculty Publications

Introduction: We used CBCT scans of a human mandibular molar in concert with the Stratasys 3-D printer to fabricate said teeth with similar texture and hardness to enamel, dentin, and cementum. The printed tooth should also have the same crown and root anatomy, as well as root canal anatomy of the scanned tooth. Methods: One mandibular first molar was scanned (Carestream Dental CS 9600 CBCT) and printed (Stratasys 3D multi-material printer). A (Micromet 5104) hardness tester was used to test the hardness of the printed tooth. Nine combinations of two different materials (Stratasys’ Vero Pure White and Agilus 30 Clear …

Efect Of Conventional Cigarette Smoking And Recent Heated Tobacco Products On Cad/ Cam Restorative Materials, Fatma Makkeyah, Omar Elsergany, Mohamed Shamel, Mahmoud Al Ankily

Dentistry

No abstract provided.

The Effect Of Using Two Sintering Cycles On The Optical Properties Of Gradient Multi-Layered Zirconia (In Vitro Study), Fatma Makkeyah, Passent Elghalab, Maged Zohdy, Mostafa Nour

Dentistry

No abstract provided.

Innovation 360: Showcasing Dentistry's Latest Advancements., Jack Nguyen Ms, Dds

Metro Denver Dental Society Articulator Magazine

The article recaps the new dental innovations from Biolase, Cocofloss, Dr. Jen Natural, InnoBioSurg, Prosites, and REMastered Sleep presented during the 2024 Rocky Mountain Dental Convention (RMDC) Innovation 360 course.

Success Of Early Childhood Caries After Treatment With Silver Diamine Fluoride Compared To Conventional Glass Ionomer Restoration. A Systematic Review, Sara H. Younis, Afnan M. Elkordy, Nouran M. Alshazly

Future Dental Journal

Abstract

Aim: To compare the success rate regarding esthetics, parenteral satisfaction, and oral health related quality of life (OHRQoL) after treatment of early childhood caries with Silver Diamine Fluoride (SDF)compared to conventional Glass ionomer Restoration (CGI).

Materials and Methods: We conducted a systematic review following PRISMA statement by searching on the following electronic databases: PubMed, Cochrane.

Results: From the studies included in this systematic review, two studies showed significant difference in color stability between SDF and CGI. Two studies showed no significant difference in parental satisfaction with either SDF or Glass Ionomer. Regarding the Oral Health Related Quality of Life, …

The Effect Of Preparation Design And Thermal Cycling On The Marginal Accuracy Of Hybrid Ceramic Laminate Veneers, Esraa El Bably, Ossama Saleh Abdelghany, Mostafa Aboushahba, Shereen Ahmed Nossair

Future Dental Journal

Aim: This study investigated the effect of preparation design and thermal cycling on the marginal accuracy of hybrid ceramic laminate veneers. Materials and Methods: A total of twenty 3D printed dies of central incisors prepared with 2 preparation designs; butt joint and palatal wrap design were fabricated. Each type of preparation was assigned into 2 subgroups (n=5/each subgroup) according to the type of material used for fabrication of the laminate veneer; hybrid ceramic and lithium disilicate (served as control). Marginal discrepancy was evaluated using a digital microscope before and after thermocycling. Results: Statistically analysis of marginal gaps revealed that before …

Comparison Of Alignment Duration Between 0.018” And 0.022” Slot Brackets In Non-Extraction Orthodontic Adult Patients: (A Randomized Clinical Study), Omar Hazem Abouwafia, Hala Munir Abdel Majeed, Mona Salah Fayed, Nouran Fouad Seif-Eldin

Future Dental Journal

Abstract:

Introduction: Orthodontist tend to use one of the 2 bracket slot sizes available either the 0.018” or 0.022” bracket slot. Till now there is no reliable scientific evidence that indicates if any of them has a superior effect on the duration of teeth alignment. The aim of this study is to compare alignment duration between 0.018 and 0.022-inch bracket slot systems.

Subjects and methods: 14 Eligible participants having an age range of 14-22 years were randomly allocated to 2 groups (7 in each group). Group I: 0.018-inch and Group II: 0.022-inch slot (American orthodontics Mini master Roth prescription …

Comparison Between Orthodontic Measurements Taken From Cone-Beam Computed Tomography (Cbct) And Digital Models After Enmasse Retraction In Orthodontic Patients With Maxillary Protrusion., Amr M. Attia, Amr R. El-Beialy, Heba M. Dehis, Yehya A. Moustafa

Future Dental Journal

ABSTRACT

Objectives: This study aimed to evaluate the accuracy and reliability in measuring anchorage loss, molar rotation, and total amount of retraction using cone beam computed tomography (CBCT) and to compare them with the same measurements obtained using digitally scanned dental models. Materials and methods: 24 patients requiring comprehensive orthodontic treatment including extraction of 1st premolars with maximum anchorage using enmasse retraction. CBCTs were undertaken on the same 24 patients using InVivoDental software for measurement. The digital cast was made using alginate impressions, from which virtual 3D models will be created and measured using 3Shape analyzer software. Orthodontic measurements will …

Measuring Accuracy Of Dolphin Imaging Software In Predicting Upper Jaw Soft Tissue Profile Changes In Class Ii Adult Patients Treated With Extraction Versus Non-Extraction., Amr Amin Arif, Esam Nasef, Amira Aboalnaga

Future Dental Journal

Abstract

Objective: To assess the accuracy of Dolphin Imaging software in predicting upper jaw profile changes in class II patients treated by extraction and non-extraction.

Methods: The records of 60 Class II div 1 patients were selected; 30 patients treated by extraction of upper first premolar and 30 patients treated by non-extraction. The Pre- and post-treatment lateral cephalometric x-rays of each patient were traced using Dolphin software. The actual hard tissue changes due to treatment were calculated and installed into the prediction module to generate the predicted profile. The soft tissue measurements of the actual post-treatment and predicted profiles were …

Smear Layer Removal Using Two Different Ni-Ti Instruments With Two Different Irrigating Systems. An Invitro Study, Tasneem Mohamed Reyad, Wael Ahmed Hessein, Ahmed Abdelrahman Hashem Ah, Said Abd Elhafiz

Future Dental Journal

Objectives: To evaluate and compare smear layer removal in root canals instrumented with two single Ni-Ti rotary instruments with two different irrigating systems. Materials and Methods: Sixty recently extracted single-rooted mandibular premolars teeth were decoronated to a standardized length of 14 mm. Roots were divided into two main groups (n=30) according to the rotary NiTi file used for instrumentation either with One Shape (OS) file or with One Curve file (OC). Each main group was subdivided into three subgroups according to the methods used to agitate the irrigating solutions either sonically or ultrasonically as following: Group A was subdivided into …

Contents Of Vol. 31, No.1, April 2024, Yuniardini Septorini Wimardhani

Journal of Dentistry Indonesia

This is the Cover and the Contents of the Vol. 31 No. 1 2024

Increasing Oral Health In A Midwest Elementary School: Quality Improvement Project, Dee Young

Doctor of Nursing Practice Projects

Marginalized communities experience barriers to accessing oral healthcare in the United States (US). Due to this, many children are left to use the emergency department (ED) for dental care. The purpose of this Doctor of Nursing Practice (DNP) project was to improve oral health services access in children at one suburban Midwest elementary school. The objectives of this project were: a) to improve the efficiency of students registering in Fall 2023 to access available oral health exam services, b) to increase the number of students who receive an oral health exam compared to the number in the previous school year. …

Areas Of Interest In Dental Education: A Bibliometric Analysis Of The Last Decade, Eswar Kandaswamy

School of Dentistry Faculty Publications

This study aimed to perform a comprehensive bibliometric analysis of journals focused on dental education (Journal of Dental Education and European Journal of Dental Education) from 2014 to 2023. An ISI Web of Science Search was performed in October 2023 with no filters for language or keywords. Published articles between 2014 and 2018, 2019 and 2023, and 2014-2023, along with the top 100 cited articles published within this period were exported as txt files. Keyword and title word network maps and occurrences were generated using VOS Viewer software. Author-affiliated countries with the most publications were tabulated from the Web of …

Trueness Of Milled Zirconia Versus Milled Hybrid Ceramic Crowns Designed For Primary Teeth Restoration Compared To The Digitally Designed File: An In Vitro Study, Joy Elian Hayek, Hani Tohme, Lara Nasr, Ghida Lawand, Roula El Hachem, Nada Farhat Mchayleh

International Arab Journal of Dentistry

Introduction: Stainless Steel Crowns (SSC) are not easily replaced by Zirconia Prefabricated Crowns (ZPC) because of their adaptation problem and risk of fracture and loosening.

Objectives: To assess and compare the trueness of milled zirconia and milled hybrid ceramic crowns designed for primary teeth restoration to a digitally designed file.

Methods: The fourteen extracted primary molars were scanned using an intraoral scanner to obtain digital files of the teeth. The digital files were imported into the Design dental software (TDS) and used to design and mill zirconia and hybrid ceramic crowns using a 4-axis milling machine: 14 …

Physical Properties And Bioactivity Of Aloe Vera Modified Tricalcium Silicate-Based Cement, Heba Seif, Ashraf Abu-Seida, Ahmed Elbanna, Dalia El-Korashy

International Arab Journal of Dentistry

Objective: This study compares the physical properties and bioactivity of tricalcium silicate-based cement (Matreva MTA) modified with various concentrations of Aloe vera (AV) solutions and Biodentine cement.

Methods: Sixty discs were prepared, and divided into 5 groups (12 discs each) based on the estimated materials: group I: Biodentine, group II: Matreva MTA, group III: Matreva MTA with 10% AV, group IV: Matreva MTA with 20% AV and group V: Matreva MTAwith 30% AV. The flow and setting time were assessed following ISO standard6876:2012 and American Society for Testing and Materials (ASTM) standard C266-21, respectively. The in-vitro bioactivity wasevaluated …