Dental Materials Commons^™

Digital Assessment Of Subtractive And Additive Cad/Cam Fabrication Methods On The Fit And Accuracy Of Lithium Disilicate Veneers, Sara Fikry Elshafei Dr, Islam Heiba Dr, Basma Fayyad, Maha Nagy

Dentistry

No abstract provided.

Effect Of Dynamic Fatigue Loading On The Adaptation And Retention Of Maxillary Single Dentures Reinforced With Digitally Constructed Zirconia And Cobalt–Chromium Frameworks, Ghada Elgindy, Fardos N Rizk, Marwa Ezzat Sabet, Hebatallah Tarek Mohamed

Dentistry

Background. The impact of dynamic fatigue loading on denture adaptation and retention is clinically important. Zirconia and cobalt–chromium (Co–Cr) frameworks enhance denture strength, but their performance under cyclic loading remains unclear. Objectives. The aim of the study was to evaluate the adaptation and retention of maxillary single dentures reinforced with digitally constructed Co–Cr or zirconia frameworks after a simulated 1 year of function. Material and methods. Three types of maxillary single dentures were constructed on maxillary master casts. Group A included maxillary dentures without reinforcement (control group), whereas groups B and C encompassed maxillary dentures reinforced with digitally designed and …

The Effect Of Cementation Load, Unload Time And Storage Time On Film Thickness And Μtbs Durability Of Dual-Cure Resin Cements. An In-Vitro Study, Sara Adel Botros, Abdullah Hassanien, Nader Maher Tadros, Farid Sabry El-Askary, Salvatore Sauro

Dentistry

No abstract provided.

Effect Of Remineralization And Resin Infiltration On Microhardness, Mineral Content And Cervical Microleakage Of Restored Demineralized Enamel, Sara Adel Botros, Caroline Maged Massieh

Dentistry

No abstract provided.

Effect Of Remineralization And Resin Infiltration On Microhardness, Mineral Content And Cervical Leakage Of Restored Demineralized Enamel., Caroline Maged Massieh, Sarah Adel Botros

Dentistry

Purpose: To evaluate the effect of remineralization and resin infiltration on microhardness, mineral content and microleakage in artificially-induced cervical enamel lesions. Materials and Methods: 50 human central incisors were assigned to 5 study groups (n=10) according to different surface intervention: Group 1: Positive Control (sound teeth not subjected to demineralization); Group 2: Negative Control (teeth subjected to demineralization); Group 3: CPP-ACP paste (remineralization of demineralized lesions with CPP-ACP, Tooth Mousse, GC); Group 4: HAp toothpaste (remineralization of demineralized lesions subjected with HAp, Herbadent Remin); Group 5: Resin infiltration (resin infiltration of demineralized lesions with ICON, DMG). Microhardness (MH) was evaluated …

From Silos To Systems: A Conceptual Framework For Workforce Aligned Oral Health Education, Meghan Bastin

2026 Scholarly Teaching Conference: Poster Session Papers

In the current U.S. educational system, becoming a dentist follows a few prescriptive pathways.  Learners typically complete an undergraduate degree before entering time-intensive doctoral training.  This results in only 3-4 years of direct professional education embedded within an eight -year process, while learners accumulate significant financial investment in their education.  With the average cost of graduate-level dental education alone exceeding $300,000 and new federal borrowing limits likely to further constrain access, there is an opportunity to explore alternative ways of structuring oral health education.

This poster presents a conceptual, system-level framework that explores a perspective in which oral health education …

Infection Control Across Clinical And Laboratory Dental Settings Protocols, Risks, And The Role Of Emerging Technologies, Khrystyna Vyprynyuk, Laura Andreesku

Publications and Research

This article explores infection prevention strategies and disease transmission pathways in dental settings, emphasizing the critical connection between clinical practice and dental laboratories. It highlights the risks of cross-contamination, disinfection and sterilization challenges, and the growing role of technology in enhancing infection control.

Impact Of Adhesive Curing Mode And Dentin Sealing On Bond Strength Of Cad/Cam Resin Composite, Sara Adel Botros, Mohamed Fouad Haridy, Nermin Mohieldin Abdelmohssen

Dentistry

No abstract provided.

Color Stability Of Enamel Exposed To Chlorinated Water After Remineralization, Sara Adel Botros, Mohamed Samy Salama, Mahmoud Al Ankily, Nora Alzayyat

Dentistry

No abstract provided.

Remineralization Effect On Enamel Physicochemical Properties After Chlorine-Induced Erosion, Sara Adel Botros, Mohamed Samy Salama, Mahmoud Al Ankily, Nora Ahmed Alzayyat

Dentistry

No abstract provided.

Effect Of Sdf Application Versus Diode Laser Irradiation On Incipient Carious Lesion’S Progression In Primary Molars: A Randomize Clinical Trial, Islam Yehia, Noha Samir Kabil, Basma Gamal

Dentistry

The present study aimed to investigate the effect of two different preventive measures a) Silver diamine (SDF) application, b) Diode laser irradiation, on caries progression of incipient carious occlusal lesions in primary second molars. This clinical trial included two equal study groups of patients, for applying; Group I: SDF application, Group II: Diode laser irradiation, the included second primary molars for intervention were selected with incipient carious lesions graded by International Caries Detection & Assessment System (ICDAS)with scores (0,1,2). The involved molars were followed up for 3, 6, 12 months and ICDAS scores were graded to check for caries progression …

Effect Of Acid-Containing Drinks On Surface Roughness And Bacterial Accumulation Of Different Types Of Denture Base Materials, Sara Fikry Dr, Ayman Amin, Eman Khedr, Fatma Makkeya

Dentistry

No abstract provided.

Effect Of Margin Thickness And Cement Gap On The Fabrication And Fit Accuracy Of Additively Manufactured Crowns In Definitive Resins With Different Filler Content, Mustafa Borga Dönmez, Gülce Çakmak, Çiğdem Kahveci, Amir H. Nejat, Burak Yilmaz, Pinar Altinci

School of Dentistry Faculty Publications

PURPOSE: To evaluate how commercially available composite resins in varying filler content affect the fabrication and fit accuracy (trueness and precision) of additively manufactured (AM) definitive crowns with different margin thickness and cement gaps by comparing them to subtractively manufactured (SM) polymer-infiltrated ceramic crowns. MATERIALS AND METHODS: Two identical unprepared mandibular right first molars were prepared by an experienced prosthodontist for crowns with either 0.5 mm or 1.0 mm chamfer margins, verified using silicone indexes and a periodontal probe, and then digitized with an industrial-grade scanner. These scan files were used to design reference crowns with either 50-µm or 80-µm …

Centering And Shaping Abilities Of Three Different Cross-Section Rotary Systems In Curved Canals Using Cbct, Sherif Shafik

Dentistry

ABSTRACT The aim of the study was to examine the centering and shaping abilities of the E3 Azure, T Blue and XPRS rotary devices in severely curved root canals utilizing CBCT. 51 mesial roots were used in this study, then distributed into three groups of 17 mesial canals each according to the instrumentation technique: T-Blue, E3 Azure and XPS. The final apical size of instrumentation was 30/0.04 for all groups. At 2 mm, all pairwise comparisons were statistically significant, with Azure showing the highest transportation, followed by T-Blue, and XPS showing the least (p< 0.001). At 4 mm and 6 mm, Azure and T-Blue showed significantly higher transportation than XPS (p< 0.001). For XP-Shaper files, centering ratios followed a descending order from 6 mm to 4 mm and were lowest at 2 mm, with all pairwise comparisons being statistically significant (p< 0.001). it was concluded that XPS show lesser transportation and better centering ability.

Evaluation Of Marginal And Internal Fit In Cad/Cam-Fabricated Indirect Restorations, Sara Adel Botros, Mohamed Samy Salama, Hend Sayed Ahmed, Ayman Helmy

Dentistry

No abstract provided.

The Effect Of Different Surface Treatments On The Roughness, Translucency, And Staining Of 3d-Printed Occlusal Device Materials, Silvia Rojas Rueda, Hanna Sepsick, Mohammed Hammamy, Amir H. Nejat, Edwin Kee, Nathaniel C. Lawson

School of Dentistry Faculty Publications

OBJECTIVES: To compare surface treatments (as-printed, optical polish, resin-coated, polished) of two 3D-printed occlusal device materials (KeySplint Soft and NightGuard Flex 2) cured with or without glycerin for surface roughness, translucency, and coffee staining. MATERIALS AND METHODS: Discs (2 mm thick) from two 3D-printed occlusal resins (KeySplint Soft and NightGuard Flex 2) were printed using a DLP 3D printer (SprintRay Pro 95), cleaned (ProWash S), and cured (ProCure 2) with or without glycerin. Some specimens were printed in an optical polish tank. Specimens were either as-printed, resin-coated, or polished. Reference milled (ProArt CAD Splint) and heat-cured (Excel Formula Heat Cure …

Effect Of Different Cavity Designs And Cad/Cam Blocks On Fracture Resistance Of Maxillary Premolars With Mod Cavities, Hend Sayed Ahmed, Mohamed Fouad Haridy, Radwa Nagy Ahmed, Shimaa Elsayed Elhusseiny

Dentistry

No abstract provided.

Effect Of Resin Restorative Material Type And Layering Techniques On The Fracture Resistance Of Maxillary Premolars, Mohamed Fouad Haridy, Radwa Ahmed Nagy, Shimaa El-Sayed El-Husseiny

Dentistry

No abstract provided.

Fracture Resistance Of Mutilated Maxillary Premolars Restored With Different Direct & Indirect Restorations, Hend Sayed Ahmed, Mohamed Fouad Haridy, Hanan Elsherbiny, Samar Swelam

Dentistry

No abstract provided.

Effect Of Smoking And Finishing And Polishing Protocol On Color Stability And Surface Roughness Of Resin Composite, Fatma Makkeyah, Mohamed Samy Salama, Sara Adel Botros, Mohamed Shamel, Mahmoud Al Ankily

Dentistry

Purpose To investigate the influence of smoking and finishing and polishing protocol on color stability and surface roughness of resin composite. Materials and methods Seventy-two discs fabricated from supra-nanofilled composite were divided to 6 groups according to: Tobacco Product (Conventional Cigarette/CS and Heated Tobacco/HTP); and Finishing and Polishing Protocol (Control/C, Multi-step finishing system/FS, and Medium-grit abrasive bur + two-step polishing system/ PS). After finishing and polishing, specimens were exposed to a total of 600 cigarettes, divided into 20 each day, simulating 30 days of smoking. Color parameters were detected using a spectrophotometer. Surface roughness (Ra) was measured before and after …

Fracture Resistance Of Mutilated Maxillary Premolars, Hend Sayed Ahmed, Mohamed Fouad Haridy, Hanan Elsherbiny, Samar Swelam

Dentistry

No abstract provided.

Effect Of Resin Restorative Material Type And Layering Techniques On The Fracture Resistance Of Maxillary Premolars, Hend Sayed Ahmed, Mohamed Fouad Haridy, Radwa Nagy, Shimaa Elsayed Elhusseiny

Dentistry

Abstract

Objectives: This study aimed to evaluate the fracture resistance of premolar teeth with standardized mesio-

occluso-distal (MOD) cavities, restored using various techniques (layering techniques and composite-resin

restorations)

Materials and Methods: Seventy intact maxillary premolars with standardized MOD cavities were randomly

divided into seven groups (n=10): G1 control intact teeth; G2: MOD cavities left unrestored; G3: restored using an

incremental technique with nanohybrid resin composite (Neo Spectra TM ST, Dentsply Sirona); G4: restored in

bulk using a flowable composite (SDR Flow+, Dentsply Sirona); G5: bulk-filled with a multihybrid composite

(Tetric N Ceram, Ivoclar); G6: restored using an incremental technique with …

Fracture Resistance Of Maxillary Premolars Restored With Different Dentin Replacement Protocols, Hend Sayed Ahmed, Shadwa Hatem Kabil, Maha Elbaz

Dentistry

Aim: The aim of this research was to investigate the fracture resistance of premolar teeth with standardized

mesioocclusodistal (MOD) cavities restored with different dentin replacement protocols.

Subjects and methods: Sixty sound maxillary premolar teeth with standardized MOD cavities were assigned

to six groups (n=10): G1: sound teeth (positive control); G2: unrestored premolars with MOD cavities

(negative control); G3: restored incrementally with nanohybrid resin composite; G4: restored by bulk fill

flowable followed by nanohybrid resin composite; G5: restored with packable fiber-reinforced composite

followed by nanohybrid resin composite and G6: restored with flowable fiber-reinforced composite followed

by nanohybrid resin composite. After being …

Effect Of Load Removal On Bonding Of Resin Cement To Cad/Cam Composite, Sara Adel Botros, Farid Sabry El-Askary, Nader Maher Tadros, Abdallah Hassanien, Salvatore Sauro

Dentistry

No abstract provided.

The Influence Of Adhesive Curing Mode (Light Vs. Dual) On The Microtensile Bond Strength Of Cad/Cam Composite Blocks To Human Dentin : (In-Vitro Study), Shadwa Kabil, Mohamed F. Haridy, Amr Hesham

Dentistry

No abstract provided.

Evaluation Of Marginal And Internal Fit In Cad/Cam-Fabricated Indirect Restorations, Mohamed Salama, Sara Adel Botros, Hend Sayed Ahmed

Dentistry

Objectives: This study investigated the effect of marginal adaptation and internal fit of premolar teeth restored with indirect overlays, fabricated from different CAD/CAM materials (lithium-disilicate and composite blocks). Materials and Methods: Twenty-two intact premolars with standardized concave chamfer overlay preparation were divided into two groups (n= 18) Group (A): lithium disilicate blocks and Group (B): composite blocks. All groups cemented with dual cured resin cement. After 24h of storage at 37°C followed by thermocycling. Marginal gap evaluation evaluated using a stereomicroscope at x50 magnification at 4 points at each surface. Specimens were then sectioned mesiodistally to assess internal fit. Statistical …

Effect Of Build Orientation On The Fabrication Trueness Of Additively Manufactured Implant-Supported Complete Arch Interim Fixed Prostheses, Amir H. Nejat, Mehmet Esad Güven, Gülce Çakmak, Burak Yilmaz, Mustafa Borga Donmez

School of Dentistry Faculty Publications

PURPOSE: To evaluate how build orientation affects the fabrication trueness of additively manufactured implant-supported complete arch prostheses by comparing them to subtractively manufactured high-impact polymer-based prostheses. MATERIALS AND METHODS: An edentulous maxillary model with four implants at canine and first molar regions bilaterally was digitized (ATOS Core 80 5MP) to design a reference implant-supported complete arch prosthesis standard tessellation language file (RF-STL). The STL file was used to manufacture prostheses additively in five different orientations according to the build platform (AM-0, 0-degree; AM-15, 15-degree; AM-30, 30-degree; AM-45, 45-degree; AM-90, 90-degree) or subtractively (SM-HIP, control) (n = 10). The prostheses were …

Indirect Composite Color Stability And Surface Roughness After Finishing, Mohamed Fouad Haridy Prof. Dr., Sara Adel Botros Dr., Nermeen Hamada Hassan

Dentistry

This study aimed to evaluate the effect of different finishing and polishing systems (one-step, two-step, and multi-step) and the application of a diamond polishing paste on color stability, surface roughness, and surface morphology of a CAD/CAM composite block. A total of seventy-seven blocks from eight composite CAD/CAM blocks were used in this study. They were divided into three main groups (22 each) according to the different finishing and polishing systems used one-step, two-step, or multi-step systems. In addition to these groups, the control group (n = 11) has no treatment. Depending on whether the polishing paste was used, each group …

Effect Of Smoking And Finishing/Polishing On Roughness Of Nanohybrid-Composite, Sara Adel Botros, Mohamed Salama Dr., Fatma Makkeyah Ass. Dr., Mohamed Shamel Ass. Prof., Mahmoud Ankily Ass. Prof.

Dentistry

To evaluate effect of conventional cigarette and heated tobacco product smoking and finishing/polishing protocol on surface roughness of a nanohybrid composite. Thirty-six discs (6mm diameter/2mm thickness) fabricated from nanohybrid composite (Palfique LX5, Tokuyama, Japan) were assigned to 6 groups according to: tobacco product (conventional cigarette/LM, Philip Morris International Inc., Egypt; and heated tobacco/Heets, Russet, Philip Morris International Inc., Italy); and finishing/polishing protocol (control /discs cured against Mylar strip; finishing discs/Diamond Master Kit, FGM, Brazil; two-step polishing system/DIACOMP PLUS TWIST, EVE, Germany). Prior to finishing/polishing protocols, all specimens were wet ground with medium grit finishing stone (komet, Germany) as baseline. Following …

Influence Of Smoking And Finishing/Polishing On Composite Color Stability, Mohamed Samy Salama Dr., Sara Adel Botros, Fatma Makkeyah Ass. Dr., Mahmoud Ankily Ass. Prof., Mohamed Shamel Ass. Prof.

Dentistry

To assess the influence of conventional cigarette and heated tobacco product smoking and finishing/polishing systems on color stability of a nanohybrid composite. Thirty-six discs (2mm thickness/6mm diameter) fabricated from nanohybrid composite (Palfique LX5, Tokuyama, Japan) were divided to 6 groups according to: tobacco product (conventional cigarette/LM, Philip Morris International Inc., Egypt; and heated tobacco/Heets, Russet, Philip Morris International Inc., Italy); and finishing/polishing system (control /discs cured against Mylar strip; finishing discs system/Diamond Master Kit, FGM, Brazil; two-step polishing system/DIACOMP PLUS TWIST, EVE, Germany). All specimens were wet ground with medium grit finishing stone (komet, Germany) as baseline before performing finishing …