Dental Materials Commons^™

Antibacterial Efficacy Of Resin-Based Dental Composites Modified With Antibacterial Agents Against S. Mutans: A Systematic Review, Ahmad Setiawan Jarigau, Erwin Gunawan, Muhammad Akira Takashi Dharma, Fanny Dinda Nur Aulia, Lenni Indriani Hatta, Nurhayati Natsir

International Arab Journal of Dentistry

Introduction: Dental caries caused by Streptococcus mutans is a leading cause of dental restoration failure. Enhancing composite resins with antibacterial agents aims to inhibit bacterial growth and prolong restoration life.

Objectives: This review evaluates the anti-bacterial agents efficacy of these modified composites against S. mutans and explores their mechanisms and potential clinical benefits.

Methods: A comprehensive literature search was conducted across multiple databases following PRISMA guidelines, focusing on in vitro studies published between 2015 and 2025. Studies evaluating composites with antibacterial additives against S. mutans using standard microbiological assays were included. The quality of eligible studies was assessed using the …

Effect Of Home Bleaching With Carbamide Peroxide And Over-The-Counter Products On Stained Supra-Nano-Filled Composite: An In-Vitro Study., Lynn Harrouk, Pascale Habre, Samar Bou Jaoude, Carina Mehanna Zogheib

International Arab Journal of Dentistry

Objective: This study evaluated the impact of home and over-the-counter (OTC) bleaching products, compliant with SCCS regulations, on color changes in tea-stained supra-nano filled composite, using the CIEDE2000 formula.

Methods: One hundred Estelite® Sigma Quick discs were fabricated, thermocycled, and tea-stained for 12 days. Samples were divided into four groups: Opalescence 15% carbamide peroxide (CP) gel, White Dental Beauty 6% hydrogen peroxide (HP) strips, Pola Luminate 6% HP brush-on gel, and a control. Color was measured at baseline, post-staining, and post-bleaching using a VITA EasyShade spectrophotometer. ΔE₀₀ values were analyzed with Kruskal-Wallis and Dunn’s post-hoc tests (p < 0.05).

Results: All bleaching …

Influence Of Ceramic Thickness And Cad/Cam Ceramic Materials On The Fracture Resistance Of Indirect Restorations: An In Vitro Study, Lara El Hanach, Karim Corbani, Nabil Ghosn, Ryan Harouny, Cynthia Kassis

International Arab Journal of Dentistry

Objectives: This in-vitro study aimed to evaluate the impact of different CAD/CAM materials (IPS e.max® CAD and Cerasmart®) and thicknesses (0.7 mm, 1 mm, and 1.5 mm) on the fracture resistance of indirect overlay restorations.

Methods: Sixty-three human third molars were divided into 7 groups (n=9) based on material and thickness, including a control group of 9 sound teeth. Only 54 specimens were prepared using a thin-section cutting machine, scanned, and their scans were used to fabricate overlays from different materials and thicknesses. After adhesive cementation, the overlays underwent thermal cyclic loading (5,000 cycles between 5°C and 55°C). A universal …

Effect Of Different Deep Margin Elevation Thicknesses Versus No Elevation On The Fracture Resistance Of Indirect Restorations: An In-Vitro Study, Fleurene Daraze, Karim Corbani, Brigitte Douaihy, Hadi Jomaah, Cynthia Kassis

International Arab Journal of Dentistry

Objectives: This in-vitro study aimed to evaluate whether different deep margin elevation (DME) thicknesses (1 mm, 2 mm, 3 mm) influence the fracture resistance and fracture type of molars restored with CAD/CAM lithium disilicate overlays, compared to no elevation.

Methods: Seventy-six extracted human molars were randomly divided into four groups (n=19) based on Deep Margin Elevation thickness: 0 mm (control), 1 mm, 2 mm, and 3 mm. Standardized Class II cavities were prepared with cervical margins extending 1 mm below the cementoenamel junction. DME was performed using a low-viscosity hybrid composite. Using a CAD/CAM workflow, overlays were designed and milled …

Effectiveness Of Different Home Bleaching Treatments On Color Change And Tooth Sensitivity: A Split-Mouth Design, Tarek Hanbali, Rim Bourgi, Carlos Enrique Cuevas-Suárez, Monika Lukomska-Szymanska, Walter Devoto, Nicolas Nassar, Naji Kharouf, Louis Hardan

International Arab Journal of Dentistry

Objectives: Dental at-home bleaching is a widely recognized and effective treatment for improving the shade of anterior teeth. However, the impact of varying application times of carbamide peroxide (CP) concentrations on whitening efficacy and tooth sensitivity (TS) remains unclear.

Methods: In this split-mouth, randomized clinical trial, 80 participants were divided into two groups (n = 40 each) to receive either 10% or 16% CP gel for home bleaching. Different application times were tested. Tooth color was measured using the Optishade colorimeter, and TS was evaluated via a five-point analog numerical rating scale. The Friedman test with post hoc Tukey test …

Management Of Anterior Teeth Affected By Molar Incisor Hypomineralization Using Resin Infiltration Technique: A Case Report, Atika Bouabid, Selsebil Laajimi, Yamina Elelmi, Fatma Masmoudi, Ahlem Baaziz

International Arab Journal of Dentistry

Background: Molar-Incisor Hypomineralization (MIH) is a developmental enamel defect affecting first permanent molars and often incisors, presenting unique restorative challenges. In line with minimally invasive dentistry, the “Würzburg concept” promotes conservative management strategies with resin infiltration.

Objectives: This case report investigates the impact of modifications to the ICON resin infiltration protocol on esthetic outcomes and adhesion in MIH-affected anterior teeth.

Method: Three clinical cases involving MIH lesions on anterior teeth were treated using the Icon® resin infiltration system by DMG (Hamburg, Germany).

Results: Preconditioning hypomineralized enamel with 5.25% sodium hypochlorite followed by resin infiltration enhances the physical integrity of composite …

Effect Of Red Wine Immersion On The Flexural Strength Of Glass Ionomer Cement: An In Vitro Study, Niyola Crasta, Upasana Reddy, Jayaprakash Kukkila

International Arab Journal of Dentistry

Background: Alcoholic beverages such as red wine are widely consumed for social and cultural reasons. Ethanol and other constituents in red wine might alter the physical properties of dental restorative materials, particularly those exposed in the oral environment. Glass ionomer cements (GICs) are commonly used in restorative dentistry for their beneficial properties, but their mechanical strength under exposure to acidic or alcoholic solutions is a concern.

Objectives: To evaluate how exposure to red wine over time affects the flexural strength of glass ionomer cement (Shofu FX Ultra Mini).

Methods: Thirty rectangular specimens of glass ionomer cement (Shofu FX Ultra Mini), …

Effect Of Ingot Thickness And Translucency Of Lithium Disilicate Glass-Ceramic And Final Shade: An In Vitro Study, Rami Shurbaji Mozayek, Even Hanifi, Hiba Al Helou, Mohammed Yamen Al Shorbaji Al Moziek, Nour Al Deen Kharboutly

International Arab Journal of Dentistry

Introduction: laminate veneers can alter the final shade depending on factors like resin cement shade or material used. Other factors such as ceramic thickness and translucency will be discussed in this study.

Methods: The study sample consists of 60 discs made of lithium disilicate glass ceramic divided into four groups (HT, LT, MO, HO) according to their translucency, each group was subsequently divided into three subgroups (1, 0.75, 0.5 mm) according to their thickness. L, a,b values were measured for each disc. One-Way ANOVA was carried out with 95% confidence interval.

Results: Statistical analysis showed significant difference …

Cytotoxicity And Osteogenic Potentials Of Mesenchymal Stem Cells Via A Novel Formulation Of Mineral Trioxide Aggregate: An In Vitro Study, Ahmed Elgendi, Ehab Hassanien, Mohamed Nagy, Iman Fathy, Ashraf Abu Seida, Elhassan Hassanein

International Arab Journal of Dentistry

Objectives: Root perforations can lead to periodontitis and alveolar bone loss. This study compared cytotoxicity and osteogenic potential of zirconia-containing mineral trioxide aggregate (MTA) Matreva (MAT group) to MTA Angelus (ANG group) as root perforation repair materials.

Methods: Bone marrow mesenchymal stem cells (BM-MSCs) were extracted from two albino rats and cultivated. The cytotoxicity of the studied materials was determined using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay at three time points: 3, 7, and 14 days. The evaluated materials were employed to guide the osteogenic differentiation of BM-MSCs into osteoblasts. The osteogenic impact was evaluated by assessing calcium …

Evaluation Of Anti-Bacterial Efficacy Of Ginger, Resin Gum, And Nigella Sativa Irrigants Against Enterococcus Faecalis: An In Vitro Study, Iman El Ghazzawy, Leen Imad Hasbini, Reem Chamseddine, Wael Betbout, Roula Abiad

International Arab Journal of Dentistry

Objectives: To evaluate the antibacterial efficacy of Ginger, Resin Gum, and Nigella Sativa, against Enterococcus Faecalis.

Methods: Thirty-eight extracted single-rooted premolars were inoculated with E.faecalis, except the negative control, and incubated for 4 weeks. After instrumentation samples were divided into 4 groups (n=7) according to final irrigation: NaOCl+EDTA (Group A), Nigella sativa (B), Resin Gum (C), Ginger (D), plus 2 control groups (n=5): Saline (E), and Saline without bacterial inoculation (F). Cultures were collected at baseline and after irrigation.

Results: One-way ANOVA showed that in groups A-D a statistically significant reduction of bacterial load was observed at …

A Comparison Of Shear Bond Strength Of Denture Teeth To Denture Base Using Different Means Of Retention: An In Vitro Pilot Study, Dima Taha El Baba, Paul Boulos

International Arab Journal of Dentistry

Objectives: The objective of this work is to evaluate the shear bond strength between denture base resin and three different acrylic artificial denture teeth. The latter was subjected to three different surface modifications on the ridge lap area and compared to unmodified acrylic artificial denture teeth.

Methods: In this experimental in vitro study, twenty-four maxillary central incisor acrylic teeth were used from each of three manufacturers; namely Major®, Ivoclar® and Myerson®. The teeth were additionally divided into four test groups with six specimens in each: a control group, a chemical retention group, a mechanical retention group, and a …

Evaluation Of The Effect Of 3 Bonding Protocols On The Micro-Tensile Bond Strength Of Self-Adhesive Composite To Enamel And Dentin, Mohamad Yaman, Louis Hardan, George Najjar, Cynthia Kassis

International Arab Journal of Dentistry

Objectives: To investigate the micro tensile bond strength (µTBS) of self-adhesive bulk-fill composite (Surefil One) to enamel and dentin bonded without bonding agent, with an additional phosphoric acid etch, and with the use of a bonding agent in etch and rinse mode.

Methods: 90 sound extracted wisdom teeth were used in this study. Surefil One (Dentsply Sirona, Konstanz, Germany), Prime&Bond Universal (Dentsply Sirona, Konstanz, Germany) and Detrey Conditioner 36 Etch Gel (Dentsply Sirona, Konstanz, Germany) were tested. Teeth were divided in 6 groups of 15 teeth, according to tooth substrate (enamel and dentin) and bonding protocols (no bonding …

Evaluation Of Microtensile Bond Strength Of Composite Under Three Aging Conditions: A Comparative In Vitro Study, Fadi Hammoud, Louis Hardan, Maryse Nassif, Tala El Ghoul, Georges Najjar, Cynthia Kassis

International Arab Journal of Dentistry

Objectives: To investigate the effects of different in-vitro artificial aging protocols on the micro tensile bond strength (µTBS) of composite restorations applied to dentin.

Methods: A total of 88 teeth were prepared on dentin and divided into three distinct aging conditions and a control group : G1) Control group with no aging (n=22); G2) Thermal Cycling (Thermocycling) involving 10,000 cycles between 5°C and 55°C, with a dwell time of 20 seconds (n=22); G3) Mechanical Loading (Cyclic loading) with a 50 N load, a frequency of 1.5 Hz, and 10,000 cycles (n=22); G4) Combined Thermo-mechanical cyclic loading (TMCL) using …

Color Stability Of Conventional, 3d-Printed, And Milled Denture Teeth After Immersion In Coloring Agents: An In Vitro Study, Dany Nassif, Nancy Chemaly, Rim Bourgi, Carole Abi-Ghosn, Louis Hardan, Jihad Fakhouri

International Arab Journal of Dentistry

Objectives: This study investigates the color stability of denture teeth made from different materials when subjected to various staining solutions.

Methods: Forty-five A1 shade upper central incisors were divided into three groups: prefabricated, 3D printed, and milled denture teeth (N=45). Each group was further divided into three subgroups, with teeth immersed in coffee, wine, and artificial saliva for up to 120 days (n=5). ∆E values for color change were measured using an Optishade colorimeter.

Results: The type of teeth, type of solution, and immersion time had a significant effect on color stability (p < 0.001). Interactions between the three variables were all significant (p < 0.001). Conventional denture teeth showed slight color changes with saliva (ΔE = 1.256 by day 120), moderate changes with wine (ΔE = 2.893), and more significant changes with coffee (ΔE = 5.208). Milled denture teeth exhibited no color changes with saliva, noticeable changes with wine (ΔE = 5.359), and moderate changes with coffee (ΔE = 3.137). 3D printed denture teeth showed no color changes with saliva, but increased changes with wine (ΔE = 2.533) and highly significant changes with coffee (ΔE = 10.546). Coffee consistently caused the highest ΔE values, especially in 3D printed teeth.

Conclusions: The study …

Endodontic Management Of Dens Invaginatus Using Dynamic Navigation System In Pediatric Patient: A Case Report, Ayesha Fathima, Sahana Selvaganesh, Ganesh Jeevanandan, Pradeep Solete, Prabahdevi Maganur, Ather Syed Ahmed, Satish Vishwanathaiah

International Arab Journal of Dentistry

Dens invaginatus, also known as dens in dente, is a dental anomaly resulting from infolding the enamel organ into the dental papilla. Dynamic Navigation Systems (DNS) like Navident, offer real-time guidance during endodontic procedures, proving especially useful in complex cases, such as calcified canals or pulp obliteration. This case report presents a 13-year-old female, who reported the chief complaint of continuous pain in the upper left front tooth region. Based on the clinical and radiographical findings, a diagnosis of pulp necrosis and chronic periapical abscess in relation to maxillary canine (23) was established with dens invaginated palatal canal ( Oehler’s …

Comparative Evaluation Of Marginal And Internal Fit Of Zirconia Crown Designed Using Artificial Intelligence And Cad-Cam Software: A Systematic Review, Pritesh Gangde, Sweta Kale Pisulkar, Arushi Beri, Pritam Das

International Arab Journal of Dentistry

Introduction: The long-term performance of dental restorations depends on their internal and marginal fits. Improvements in the fit of restorations, especially zirconia crowns, have been investigated through the use of diverse materials, manufacturing processes, and impression techniques.

Objectives: The purpose of this review was to examine the internal and marginal fit of zirconia crowns made with CAD/CAM software with artificial intelligence (AI) software.

Methods: Using a combination of keywords and MeSH terms, the literature search was carried out across seven databases: PubMed, Scopus, Web of Science, Cochrane Library, Embase, ProQuest, and ScienceDirect from inception till 1st of …

Trueness Of Milled Zirconia Versus Milled Hybrid Ceramic Crowns Designed For Primary Teeth Restoration Compared To The Digitally Designed File: An In Vitro Study, Joy Elian Hayek, Hani Tohme, Lara Nasr, Ghida Lawand, Roula El Hachem, Nada Farhat Mchayleh

International Arab Journal of Dentistry

Introduction: Stainless Steel Crowns (SSC) are not easily replaced by Zirconia Prefabricated Crowns (ZPC) because of their adaptation problem and risk of fracture and loosening.

Objectives: To assess and compare the trueness of milled zirconia and milled hybrid ceramic crowns designed for primary teeth restoration to a digitally designed file.

Methods: The fourteen extracted primary molars were scanned using an intraoral scanner to obtain digital files of the teeth. The digital files were imported into the Design dental software (TDS) and used to design and mill zirconia and hybrid ceramic crowns using a 4-axis milling machine: 14 …

Physical Properties And Bioactivity Of Aloe Vera Modified Tricalcium Silicate-Based Cement, Heba Seif, Ashraf Abu-Seida, Ahmed Elbanna, Dalia El-Korashy

International Arab Journal of Dentistry

Objective: This study compares the physical properties and bioactivity of tricalcium silicate-based cement (Matreva MTA) modified with various concentrations of Aloe vera (AV) solutions and Biodentine cement.

Methods: Sixty discs were prepared, and divided into 5 groups (12 discs each) based on the estimated materials: group I: Biodentine, group II: Matreva MTA, group III: Matreva MTA with 10% AV, group IV: Matreva MTA with 20% AV and group V: Matreva MTAwith 30% AV. The flow and setting time were assessed following ISO standard6876:2012 and American Society for Testing and Materials (ASTM) standard C266-21, respectively. The in-vitro bioactivity wasevaluated …

Histological Evaluation Of Pulp Response To Pulpine Ne Versus Biodentine As Direct Pulp Capping Materials In A Dog Model, Hagar Bastawy, Maha Ahmed Niazy, Mona Farid, Asmaa Harhash, Mona Aboelwafa, Ashraf Abu-Seida

International Arab Journal of Dentistry

Introduction: The material used for pulp capping has a significant impact on the outcome of vital pulp therapy. This study compared the pulp tissue response to Pulpine NE versus Biodentine as direct pulp capping materials in a dog model.

Methods: Twenty-four teeth in two mongrel dogs (1-2-year-old) were used. In each dog (n=12 teeth), the dental pulps were exposed in 8 teeth (2 experimental groups, 4 teeth each) and left unexposed in 4 teeth (control group, n=4 teeth). A class V cavity was performed on the buccal surface of the selected teeth in the experimental groups. The exposed …

Testing The Strength Of Thin Feather-Edge Monolithic Multilayered Zirconia Crowns: A Pilot Study With A Novel Acoustic Test, Estelle Saab, Camille Haddad, Maher Abboud, Maha Daou, Amine Zoghbi

International Arab Journal of Dentistry

Introduction: Limited research has explored the mechanical characteristics of recently introduced multilayered monolithic zirconia (MZC) crowns with feather-edge margins design. Moreover, most of the conventional techniques for evaluating the mechanical behavior of brittle dental ceramics rely on destructive tests, making it impossible to precisely evaluate real strength values due to premature crack initiation detection failure.

Objectives: The main objective of the study was to assess the load capacity of translucent multilayered monolithic zirconia crowns with feather-edge margin thicknesses of 0.4 mm and 0.5 mm. Additionally, the research introduced a novel non-destructive acoustic emission testing (AET) technique in the …

Investigation Of Fracture Resistance With Different Diameters Of Polyetherketoneketone Post And Core Materials: A Pilot Study, Maya Kabbara, Ryan Harouny, Habib Rahme

International Arab Journal of Dentistry

Objectives: The primary objective of this study is to investigate the resistance to fracture of Polyetherketoneketones PEKK, used as post and core by fabrication in different diameters in the canal, and comparing the test results for each group.

Methods: Thirty extracted mandibular premolars were selected, endodontically treated and prepared to receive the post and cores milled from polyetherketoneketone disk. The specimens were randomly divided into five groups (n = 6) respectively: group 1 received pekk post with diameter = 0.70 mm, group 2 received pekk post with diameter = 0.90 mm, group 3 received pekk post with diameter …

Assessment And Quantification Of The Microbial Flora In The Output Water Of Two Types Of Dental Chairs: A Comparative Study, Khalil Kharma, Louis Hardan, Cynthia Kassis, Rim Bourgi, Regina Geitani, May Mallah, Elie Maalouf, Carina Mehanna Zogheib

International Arab Journal of Dentistry

Objectives: Dental Unit Waterlines (DUWL) have shown to be a perfect host for different pathogenic microorganisms. The purpose of this study was to analyze and compare the level of bacterial contamination in the output water of 2 types of DUWL.

Methods: Dental unit water samples from the air/water syringe of the A-dec (A-dec™ Performer 200, Newberg, USA) DUWL type and KaVo (ESTETICA™ E30/E70/E80 Vision, Kavo, Biberach, Germany) type were collected and analyzed for total aerobic flora, Pseudomonas aeruginosa, faecal coliforms, total coliforms, faecal streptococci and sulfite-reducing anaerobic flora.

Results: The bacteriological analysis of water samples shows the …

Comparative Evaluation Of Surface Changes And Bond Strength Of Microabrasion-Bleached Enamel Before And After Remineralization With Nano-Hydroxyapatite Paste: An In Vitro Study, Ridhi Dube, Anita Sanap Tandale, Twinkle Kishore Talreja, Karishma Krishnakumar, Prajakta Kokate, Vaishnavi Jemini Kasat

International Arab Journal of Dentistry

Objectives: Comparative evaluation of surface changes and bond strength of Microabrasion Bleached enamel before and after Remineralization with Nano-hydroxyapatite paste, an In vitro study.

Methods: Enamel samples were divided into - Group I - Conventional bleaching (HB), Group II - Conventional bleaching with remineralization (HB+N-Hp), Group III - Microabrasion-assisted bleaching(M+HB), and Group IV - Microabrasion-assisted bleaching with remineralization(M+HB+NHp). Surface roughness was measured using a profilometer. Samples were stored in artificial saliva for two weeks, then bonded with nanofilled composite resin and subjected to shear bond strength (SBS) analysis.

Results: Group IV (M+HB+N-Hp) showed higher surface roughness than …

Aesthetic Rehabilitation Of A Complex Crown-Root Fracture By Fragment Reattachment With A Fiber-Reinforced Post: A Case Report, Sarra Saidi, Meriem Fejjeri, Mahdi Tlili, Sabra Jaafoura, Nadia Frih

International Arab Journal of Dentistry

Complex crown-root fractures are characterized by the involvement of both crown and root with pulp exposure. They pose aesthetic, functional, and psychological problems for the patient. Furthermore, they can pose technical difficulties for the practitioner. The purpose of this case report is to describe the management of a complex crown-root fracture of the right upper central incisor with subgingival limit by reattaching the tooth fragment with fiber-reinforced post. We considered a coronal elongation (gingivectomy and osteoplasty) to recreate the biological space and to expose the limit of the fracture line to guarantee the quality of the bond.

Assessment Of Clinical Performance Of Universal Adhesives Versus Other Adhesive Systems: A Systematic Review And Meta-Analysis Of Clinical Trials, Rim Bourgi, Naji Kharouf, Carlos Enrique Cuevas-Suárez, Cynthia Kassis, Ana Josefina Monjaras-Avila, Mohammad Qaddomi, Sophie Abi Raad, Mohammed Al Hasani, Youssef Haikel, Louis Hardan

International Arab Journal of Dentistry

Universal adhesives (UAs) often exhibit comparable or even superior bond strength to traditional adhesive systems, ensuring reliable and long-lasting adhesion between the resin composite and the tooth structure. Therefore, this study aimed to assess the clinical performance of UAs compared to other adhesive systems in direct resin composite restorations through a systematic review and meta-analysis. Two reviewers executed a literature search in five electronic databases: PubMed, EMBASE, Scopus, Web of Science, and Scielo. Clinical trials comparing the clinical evaluation of resin composite restorations in Class I, Class II, or Class V cavities placed with an universal adhesive (UA) system against …

Does The Application Of Polywave Light-Curing Units Influence Physico-Mechanical Properties Of Resin-Based Materials? A Meta-Analysis Of In Vitro Studies, Miguel Ángel Fernández-Barrera, Rim Bourgi, Abigailt Flores-Ledesma, Cristina Pereira Isolan, Vincenzo Tosco, Bogdan Dimitriu, Carlos Enrique Cuevas-Suárez, Monika Lukomska-Szymanska, Louis Hardan

International Arab Journal of Dentistry

The objective of this study was to systematically review the existing literature and to assess the effect of the use of polywave light-curing units on the properties of resin-based materials. A thorough search was conducted across five electronic databases: PubMed (MedLine), ISI Web of Science, SciELO, Scopus, and EMBASE. Inclusion criteria comprised in-vitro studies that compared the effects of polywave light-emitting diode (LED) curing units with monowave LED curing units on resin-based material properties. Two reviewers evaluated the methodological quality of the included studies, considering parameters from previous systematic reviews. Meta-analyses were conducted using Review Manager version 5.3.5 (The Cochrane …

An Update Of Additive Manufacturing (3d Printing) Technology In Dentistry, Rami Saleh Al Fodeh, Ahed Al-Wahadni, Baker Otman, Mahmoud Almasri

International Arab Journal of Dentistry

Background: The development of procedures known as additive manufacturing, which aim to produce more complex items with a lower overall material consumption compared to processes known as subtractive manufacturing. In addition, in recent years there has been a significant rise in the quantity of dental materials that are produced via the use of these techniques. As a consequence of this, scientific research has been concentrating more and more on such technologies, particularly in order to shed light on the methodology, indicators, and boundaries of the emerging technology.

Methods: The purpose of this paper is to provide a narrative …

Distal Cantilever Length Comparison In Esthetic Materials For Hybrid Implant Prostheses: An In Vitro Study, Sana Shams Eddin, Elie Jasser, Mohammad Chams Eddin, Carole Abi Ghosn Yared, Joseph Makzoumi, Paul Boulos

International Arab Journal of Dentistry

Objective: the assessment of distal cantilever length in implant supported prothesis (Hybrid prosthesis) by comparing the load to fracture in two different esthetic framework materials (Zirconia and Polyetheretherketone (PEEK)) with two different cantilevers loading distances (10mm, 15mm).

Material and methods: 20 frameworks were fabricated and divided into 4 groups (n=5): according to the material type, Peek, zirconia, and according to the cantilever loading distance (10), or (15) mm and a load-to-fracture test was used until complete fracture of specimens occurs.

Results: The effect of material type and cantilever loading distance were statistically significant for the mean load-to-fracture …

The Effect Of Bevel On Fracture Resistance Of Gic Restorations In Primary Molars: An In Vitro Study, Audrey Fikani, Lara Nasr, Elie Khoury, Marianne Freiha, Marc Krikor Kaloustian, Feriale Abi Zeid Daou, Melissa Chaaya, Marlene Khoury

International Arab Journal of Dentistry

Introduction: Glass ionomer cements (GICs) are commonly used for restorations in primary molars due to their adhesive, hydrophilic, and bioactive properties. However, their low mechanical resistance may limit their use in proximal cavities. Recent advancements in GICs, such as the high viscosity GIC EQUIA Forte®, have improved their mechanical properties. The effect of a Cavo superficial bevel on the mechanical strength of GIC restorations has been previously studied.

Objectives: To investigate the effect of a Cavo superficial bevel on fracture resistance and the type of fracture (adhesive, cohesive, or catastrophic) in EQUIA Forte® GIC restorations in primary molars. …

Influence Of The Margin Design On The Fracture Resistance Of Implant Supported Monolithic Zirconia Crowns: An In Vitro Study, Camille Haddad, Ryan Harouny, Karim Corbani, Lara Nasr, Ronn Tassidis

International Arab Journal of Dentistry

Introduction: The purpose of this in vitro study was to test the influence of the margin design of implant supported monolithic zirconia crowns and test if monolithic zirconia crowns with extra fine finish line thickness cemented on zirconia implant abutments can bare the maximum masticatory forces on molars and hence be used in the posterior region.

Methods: Fourteen identical monolithic zirconia crowns cemented on zirconia implant abutments mounted on titanium bases and fixed on implant replicas embedded in PMMA resin were divided into two groups: group I designed with a 0.5 mm CFL (CFL) and group II with …