Open Access. Powered by Scholars. Published by Universities.®

Systems Science Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4081 - 4110 of 4223

Full-Text Articles in Systems Science

Mathematical Modeling And Simulation Application Of Gshp Unit, Li Hui, Shaogang Yang, Fengying Liu Jan 2019

Mathematical Modeling And Simulation Application Of Gshp Unit, Li Hui, Shaogang Yang, Fengying Liu

Journal of System Simulation

Abstract: For the purpose of building a simulation platform of GSHP system, a semi empirical mathematical model of GSHP unit adopting multiple nonlinear regression method was established based on the mechanism knowledge and the sample data of GSHP unit. A GSHP unit module was developed, namely Type223, and its accuracy was verified by simulation analysis. A TRNSYS simulation platform of GSHP system was built by Type223 module. The operation characteristics of variable flow on ground source side of GSHP system was studied under variable frequency control. The results showed that, the energy consumption of GSHP unit is increased compared …


Development Of Simulated Driving Dynamics Simulation System Of High-Speed Train, Sun Zhuang, Huanyun Dai, Gan Feng, Gao Hao Jan 2019

Development Of Simulated Driving Dynamics Simulation System Of High-Speed Train, Sun Zhuang, Huanyun Dai, Gan Feng, Gao Hao

Journal of System Simulation

Abstract: In order to truly simulate the moving postures of the high-speed train at run time, based on six degrees of freedom Stewart motion platform, dynamics simulation system and simulation operation interface are developed by VC++ programming language. The dynamics model of high-speed train system is presented in this paper, whose first vehicle is a detailed coupled model including longitudinal, lateral and vertical DOF (Degree of Freedom), and other vehicles are the mass models only with the longitudinal DOF. In the process of the simulation, the dynamics model is updated in real time according to line data and driver's …


An Improved Cs Algorithm And Its Application In Micro Grid Optimization, Changliang Liu, Pengfei Wang, Liu Shuai, Luo Lei, Zhenqiao Hui Jan 2019

An Improved Cs Algorithm And Its Application In Micro Grid Optimization, Changliang Liu, Pengfei Wang, Liu Shuai, Luo Lei, Zhenqiao Hui

Journal of System Simulation

Abstract: In order to solve the shortcomings in cuckoo search algorithm, such as slow convergence, low accuracy and easy to fall into the local optimal solution, an improved cuckoo search algorithm is proposed: CS-EO search algorithm. In this search algorithm, the fast convergence speed and global searching advantage of CS algorithm and the strong local search ability of EO algorithm are combined organically. Under the premise of guaranteeing the solving speed, the accuracy of the solution is improved. The results of optimization test functions show that CS- EO algorithm has better optimization performance compared with CS algorithm and PSO …


Mathematical Modeling And Simulation Of Hydraulic Governor For Marine Diesel Engine, Chen Jian Jan 2019

Mathematical Modeling And Simulation Of Hydraulic Governor For Marine Diesel Engine, Chen Jian

Journal of System Simulation

Abstract: The speed control and load limit of marine diesel engine are implemented by hydraulic governor, of which the characteristics directly determines the performance of generator set. Therefore, it is an important content of marine engine room simulator training to strengthen the students’ training and understanding of the working characteristics of the hydraulic governor. In the existing marine engine room simulators, the simulation model of hydraulic governor is too simple to carry out further training tasks. According to the working principle of hydraulic governor and the training purpose of marine engine room simulator, the mathematical model of UG-8 hydraulic governor …


A New Method On Trajectory Planning For Mobile Robots Using Bezier Curves, Sun Lei, Lishuang Zhang, Zhou Lu, Xuebo Zhang Jan 2019

A New Method On Trajectory Planning For Mobile Robots Using Bezier Curves, Sun Lei, Lishuang Zhang, Zhou Lu, Xuebo Zhang

Journal of System Simulation

Abstract: In view ofthe trajectory planning for the mobile robots, an efficient method based on Bezier curves is proposed, which produces better solution with shorter path and faster trajectory, compared with the existing methods. The problem of trajectory planning is divided into path planning and velocity planning. A Bezier curve is used to connect each two line-segments to obtain shorter paths. It is proved that the order of the used Bezier curves is at least five to ensure the curvature continuity of the whole path. Taking a differential-driven wheeled mobile as an example, to follow the planned path steadily and …


Soc Prediction Of Battery Based On Improved Online Kernel Extreme Learning Machine, Yukun Sun, Manman Li, Yonghong Huang Jan 2019

Soc Prediction Of Battery Based On Improved Online Kernel Extreme Learning Machine, Yukun Sun, Manman Li, Yonghong Huang

Journal of System Simulation

Abstract: In order to conduct an accurate and fast online prediction for the state of charge (SOC) of battery, an improved online kernel extreme learning machine (IO-KELM) algorithm is proposed. In this work, a prediction model is presented with charge voltage, current and surface temperature as inputs and SOC of battery as output. The IO-KELM adopts Cholesky factorization to extend the kernel extreme learning machine (KELM) from offline mode to online mode. Meanwhile, the output weights of the network are updated by successive join of the new samples, and the matrix inverse operation is replaced with arithmetic. Hence, the generalization …


Adaptive Fuzzy Sliding Mode Controller With Predictive Control For Redundant Manipulators With Variable Payload, He Jun, Minzhou Luo, Jianghai Zhao, Linsen Xu, Li Tao Jan 2019

Adaptive Fuzzy Sliding Mode Controller With Predictive Control For Redundant Manipulators With Variable Payload, He Jun, Minzhou Luo, Jianghai Zhao, Linsen Xu, Li Tao

Journal of System Simulation

Abstract: This paper presents an adaptive fuzzy sliding mode controller with Kalman predictive control (AFSMCK) for the redundant robotic manipulator handling a variable payload to achieve a precise trajectory tracking in the task space. This approach could be applied to solve the problems caused by the variable payload and model uncertainties. A Kalman predictive controller using the recursive algorithm is presented for an accurate prediction of a variable payload. The adaptive fuzzy logic algorithm is designed to approximate the parameters of the sliding mode controller to avoid chattering in real time. Lyapunov theory is applied to guarantee the stability of …


Modeling And Numerical Simulation Of Tissue Engineering Scaffold 3d Printing Process, Congping Chen, Jieguang Huang, Hu Qiong, Yanhua Ran, Li Bo Jan 2019

Modeling And Numerical Simulation Of Tissue Engineering Scaffold 3d Printing Process, Congping Chen, Jieguang Huang, Hu Qiong, Yanhua Ran, Li Bo

Journal of System Simulation

Abstract: In the process of tissue engineering scaffold fabrication using injecting 3D printing, the viscous fluid material is extruded out with a style of microfilament, which is deposited on a substrate layer by layer. The materials spread, pile up, remelt and solidify as a consequence of the couple effects of gravity, surface tension, viscous force and solidification drag force. Aiming at the above issues, the forming process of scaffold with homogeneously-sized space pores is studied with a CFD approach to research the pore forming mechanism. The results show that the viscous fluid is cooled mainly by the substrate, and heat …


Discrete Control Simulation Of Agitation Tank Based On Taylor Finite Difference, Yunong Zhang, Yaqiong Ding, Le Li, Deyang Zhang, Binbin Qiu Jan 2019

Discrete Control Simulation Of Agitation Tank Based On Taylor Finite Difference, Yunong Zhang, Yaqiong Ding, Le Li, Deyang Zhang, Binbin Qiu

Journal of System Simulation

Abstract: Zhang dynamics is used to solve the system equations of the agitation tank to get controllers. At the same time, Taylor finite difference method is used in the computer discrete control simulation for the agitator tank system. In addition, the convergence stability of Zhang dynamics applied to the agitation tank is proved through theoretical analysis. In order to achieve the draining purpose for the agitation tank, the computer discrete control simulation is conducted by means of MATLAB. For comparison, the computer simulation based on the neural network predictive controller is carried out. The comparative simulation results substantiate the …


Optimal Control And Simulation Of Hard Shoulder Running On Highways, Ruimin Li, Ye Zhen, Bin Li Jan 2019

Optimal Control And Simulation Of Hard Shoulder Running On Highways, Ruimin Li, Ye Zhen, Bin Li

Journal of System Simulation

Abstract: This paper summarizes the problems in the operation of hard shoulder running (HSR). A new algorithm for optimizing HSR on highways is proposed, which aims to minimize the total time spent (TTS) in the whole network. Based on the METANET model of highways, the algorithm utilizes genetic algorithm and sliding windows technique to forecast and optimize the operation of HSR under different constraint conditions and target functions. The strategy is tested on the I-80E highway in California. The experimental results show that when the change frequency of HSR is less than or equal to 14 during a sliding window …


Simulation Of Missile Head Cover Separation And Landing Locations, Tian Hao, Mu Zhou, Huitong Li, Zhao Yang Jan 2019

Simulation Of Missile Head Cover Separation And Landing Locations, Tian Hao, Mu Zhou, Huitong Li, Zhao Yang

Journal of System Simulation

Abstract: Some missiles use head cover to protect the internal equipment during the launching process. In order to prevent the head cover from damaging the people or equipment after separation, researchers need to predict the landing position range and take protective measures. This paper designs a separation scheme for a missile head cover separation based on solid propellant gas generator and solid rocket. In this study, we establish a dynamic simulation model of head cover separation and falling procedure. The simulation calculation of the head cover location range considering multiple factors using Monte-Carlo method is developed. And the motional …


Research On Dynamic Framed Binary Tree Anti-Collision Algorithm For Rfid System, Xiaohong Zhang, Weihui Zhou Jan 2019

Research On Dynamic Framed Binary Tree Anti-Collision Algorithm For Rfid System, Xiaohong Zhang, Weihui Zhou

Journal of System Simulation

Abstract: Based on dynamic frame-slotted ALOHA algorithm and binary search tree algorithm, a dynamic framed binary tree (DFBT) anti-collision algorithm is presented to solve the problem of multi-tag collision in radio frequency identification (RFID). Vogt algorithm is adopted to estimate tags number, then the dynamic frame-slotted ALOHA (DFSA) algorithm is used to identify tags, and the unidentified tags are extracted and the highest collision bit is judged by readers. The highest collision tags are grouped by the collision bit within the binary search tree (BST) algorithm. Simulation results show that the DFBT algorithm can improve the identification efficiency and stability …


Smooth Transition Method Over Entire Speed Range Of Switched Reluctance Motor, Diansheng Sun Jan 2019

Smooth Transition Method Over Entire Speed Range Of Switched Reluctance Motor, Diansheng Sun

Journal of System Simulation

Abstract: In order to smoothly switch different control modes of switched reluctance motor under the condition of low speed and high speed, a novel scheme using function fitting method to control turn-on angle, turn-off angle and phase current chopping is proposed. The active disturbance rejection speed control system is structured for switched reluctance motor in order to restrain all kinds of disturbance and improve the dynamic performance. Simulation results indicate that the principle of the method is correct and the turn-on angle, turn-off angle and phase current chopping is coordinated to realize the smooth switching of different control modes with …


Passivity-Based Control For Three-Phase Four-Bridge D-Statcom In Low-Voltage Distribution Network, Zheng Hong, Wencheng Xu, Jiawei Zhang Jan 2019

Passivity-Based Control For Three-Phase Four-Bridge D-Statcom In Low-Voltage Distribution Network, Zheng Hong, Wencheng Xu, Jiawei Zhang

Journal of System Simulation

Abstract: Three-phase four-bridge distribution static synchronous compensator (D-STATCOM) has the obvious superiority in solving the problems that brought by the three-phase unbalanced loads in the three-phase four-wire low-voltage power supply system. The Euler-Lagrange (EL) cycle average model is established based on the synchronous rotation d-q-0 coordinates. In the light of the nonlinear and strong coupling characteristics, the passivity-based control (PBC) and inverse cross coupling control strategy using the d-q axis nonlinear decoupling control. PBC controller is designed by energy shaping and damping injection (ESDI) based on the passivity of the system. The closed-loop system is demonstrating asymptotically stable according to …


Modified Fractional Order Sliding Model Control For Dc Speed Regulating System, Zhicheng Zhao, Zhitao Zhao, Jinggang Zhang, Xianjiao Zhao Jan 2019

Modified Fractional Order Sliding Model Control For Dc Speed Regulating System, Zhicheng Zhao, Zhitao Zhao, Jinggang Zhang, Xianjiao Zhao

Journal of System Simulation

Abstract: An improved fractional order sliding model control (FOSMC) is proposed for DC speed regulating system to eliminate static error easily caused by disturbance in sliding model control. Second order mathematical model is established through taking the derivative of first-order mathematical model of DC speed regulating system. The theory of fractional calculus is introduced to the switching function of sliding mode, and fractional sliding model is designed combining exponential reaching law and second order mathematical model. The control signal of voltage can be obtained through taking output of the controller and integrator in series. Stability analysis of the system is …


Transformer Fault Diagnosis Based On Feature Extraction Of Relative Transformation Principal Component Analysis, Yongbo Tang, Yinguo Xiong Jan 2019

Transformer Fault Diagnosis Based On Feature Extraction Of Relative Transformation Principal Component Analysis, Yongbo Tang, Yinguo Xiong

Journal of System Simulation

Abstract: In order to handle the problem that the feature extraction of dissolved gas analysis (DGA) data by principal component analysis (PCA) is not distinct, a new transformer fault diagnosis method based on relative transformation (RT) PCA is proposed. The original data space is converted to the relative data space by relative transformation which makes the transformed data more distinguishable. PCA is employed to reduce the dimension of relative space to make the features more representative in the relative space. Diagnosis model based on least squares support vector machine (LSSVM) is set up according to the fault characteristic of transformer. …


A Novel Algorithm For Improving Fairness Between Uplink And Downlink Flows In Heterogeneous Network, Peiyu Li, Zheqing Li, Wang Hui, Xia Qian Jan 2019

A Novel Algorithm For Improving Fairness Between Uplink And Downlink Flows In Heterogeneous Network, Peiyu Li, Zheqing Li, Wang Hui, Xia Qian

Journal of System Simulation

Abstract: In order to improve the fairness between uplink and downlink flows in AP optimization, a novel algorithm called FOUD(fairness over uplink and downlink) is proposed.Considering the influence of the attempt limit and the bit error rate of wireless, the FOUD algorithm modeling of AP and wireless stations is studied separately by using two-dimensional Markov chain, which derives the probability of data sending under the condition of different bit error rate and different number of uplink and downlink flows. Simulation results show that FOUD can improve the fairness of the uplink and downlink bandwidth as well as the …


Structure Optimization Analysis Of Multi-Span Antisymmetric Arch Tower Cable-Stayed Bridge, Xijun Liu, Yuan Bo, Tianyi Liu Jan 2019

Structure Optimization Analysis Of Multi-Span Antisymmetric Arch Tower Cable-Stayed Bridge, Xijun Liu, Yuan Bo, Tianyi Liu

Journal of System Simulation

Abstract: In order to analyze its force under different sections and arch span ratio of the Antisymmetric arch tower cable-stayed bridge, the paper takes an anti-symmetric arch tower cable-stayed bridge as an engineering example. Considering the effect of dead load and temperature, finite software is used to calculate the stress of the arch tower and deflection of the deck and its corresponding dynamic characteristics under different types of arch sections and different rise-span ratio of the arch. The results show that the circular cross-section has better mechanical performance compared with other types of arches tower section with the same …


Integrated Berth And Quay Crane Allocation Multi-Objective Algorithm For Container Terminal, Wang Xu, Shixin Liu, Ruiyou Zhang, Wang Jia Jan 2019

Integrated Berth And Quay Crane Allocation Multi-Objective Algorithm For Container Terminal, Wang Xu, Shixin Liu, Ruiyou Zhang, Wang Jia

Journal of System Simulation

Abstract: This paper researches on a continuous berth and quay crane allocation problem for low carbon container terminal. Considering the constraints of stochastic arrival time and limited truck transportation ability, a multi-objective nonlinear mixed integer programming model is established to minimize carbon emissions and average delay time. An efficient non-dominate sorting genetic algorithm II (ENSGA-II) is designed to deal with this problem. According to the characteristics of the problem, encoding rule and decoding rule based on rolling-horizon simulation, PPX crossover operator with elite selection, multi constraints mutation operator and repair operator are adopted. The results of several simulation experiments …


Fuzzy Sliding Backstepping Mode Control For Flight Simulator Servo Based On Friction And Disturbance Compensation, Huibo Liu, Shanglei Liu Jan 2019

Fuzzy Sliding Backstepping Mode Control For Flight Simulator Servo Based On Friction And Disturbance Compensation, Huibo Liu, Shanglei Liu

Journal of System Simulation

Abstract: Considering friction, modeling errors and other uncertainties of flight simulator servo system, a compensation strategy which combines model-based friction compensation with nonlinear disturbance observer compensation was proposed. First, the friction is modeled , whose parameters are identified by using genetic algorithm, and using the identified model to compensate. Second, using a nonlinear disturbance observer to estimate the modeling errors, friction less-compensation or over-compensation and other uncertainties, and using this observed value to compensate. The system adopted sliding backstepping controller to ensure the stabilization of the system. Finally, the fuzzy algorithm is adopted to adjust the switching gain of sliding …


Development Of A New Instrument To Assess The Performance Of Systems Engineers, Niamat Ullah Ibne Hossain, Morteza Nagahi, Raed Jaradat, Charles Keating Jan 2019

Development Of A New Instrument To Assess The Performance Of Systems Engineers, Niamat Ullah Ibne Hossain, Morteza Nagahi, Raed Jaradat, Charles Keating

Engineering Management & Systems Engineering Faculty Publications

Complex systems continue to confound the capabilities of systems engineers to deal with and navigate a new generation of problems. Thus, there is an emerging need to develop a cadre of effective systems engineers capable of efficiently addressing complex systems problems. This paper introduces a new system engineering instrument that assesses the performance of systems engineers. The instrument is based on the set of performance indicators examining six fundamental system engineering attributes. This instrument would provide a baseline to understand the current state of the systems engineering skills for a systems engineer and indicate developmental areas to enhance those skills. …


A Lightweight Modeling And Simulation Technical Framework For Complex Systems, Ji Hang, Junhua Zhou, Guoqiang Shi, Tingyu Lin, Junjie Xue Jun 2018

A Lightweight Modeling And Simulation Technical Framework For Complex Systems, Ji Hang, Junhua Zhou, Guoqiang Shi, Tingyu Lin, Junjie Xue

Journal of System Simulation

Abstract: Aiming at the modeling and simulation verification of complex systems, the paper established a lightweight simulation technical framework and a system building method. The simulation technical framework is built based on distributed network communication middleware and has graphic user interface, simulation management and run control modules, it packages effective and lightweight network middleware, object management, event management and time management and it is capable of interoperability and its members have abilities of reusable and combinable. The results show that the framework can supports flexible construction and effective simulation on complex systems.


Analysis And Simulation Of Temperature Control For Battery Pole Piece Electromagnetic Heating Roller, Jing Ran, Feng Hua, Yonggeng Wang, Haiping Song, Yanjun Xiao Jun 2018

Analysis And Simulation Of Temperature Control For Battery Pole Piece Electromagnetic Heating Roller, Jing Ran, Feng Hua, Yonggeng Wang, Haiping Song, Yanjun Xiao

Journal of System Simulation

Abstract: With the application of electromagnetic heating roller on battery pole piece rolling,the processing technology, quality and efficiency of the battery pole piece are improved. The special heating technology of electromagnetic heating roller which involves multi-physics coupling in the process of conversion makes it difficult to control the heating process and determine the control index. By studying the electromagnetic heating theory, the mathematical model of electromagnetic heating roller is established and the simulation and analysis of the electromagnetic heating roller using MATLAB software and the finite difference method are carried out. The distribution, change rule and influence factors of the …


Modeling & Simulation Technology In Manufacturing, Zhang Lin, Longfei Zhou Jun 2018

Modeling & Simulation Technology In Manufacturing, Zhang Lin, Longfei Zhou

Journal of System Simulation

Abstract: With the continuous deepening of the application of information technology in the manufacturing field, the informatization of manufacturing systems is developing from unit digital manufacturing to integration networked manufacturing, and then to the comprehensive digital, networked and intelligent manufacturing. As a comprehensive information technology integrating computer, model theory, and scientific computing, modeling & simulation technology plays an irreplaceable role during the development of manufacturing informatization and is widely applied in all phases of the whole product lifecycle, such as design, manufacturing, testing, maintenance, purchase, sales and other phase. This paper reviews and summarizes the research and application of modeling …


Research On Maturity Evaluation Technology Of Complex Digital Industrial System, Geng Chao, Shiyou Qu, Tingyu Lin, Guoqiang Shi, Yingying Xiao, Wang Mei, Qiudan Ma, Ji Hang Jun 2018

Research On Maturity Evaluation Technology Of Complex Digital Industrial System, Geng Chao, Shiyou Qu, Tingyu Lin, Guoqiang Shi, Yingying Xiao, Wang Mei, Qiudan Ma, Ji Hang

Journal of System Simulation

Abstract: Under the background of a new round of the innovation of science and technology and the revolution of industry, the complex digital industrial system is constantly innovating and shaping. Firstly, the paper established maturity evaluation model of the complex digital industrial system based on system engineering. Then, the paper proposed multi - index maturity analysis method and multi - enterprise maturity synthesis method of the complex digital industrial system. Combined with the digital industrial system of aerospace complex product, an evaluation example is presented. The results show that the maturity evaluation method can be used to standardize and guide …


Clustering Method Based On Graph Data Model And Reliability Detection, Yanyun Cheng, Huisong Bian, Changsheng Bian Jun 2018

Clustering Method Based On Graph Data Model And Reliability Detection, Yanyun Cheng, Huisong Bian, Changsheng Bian

Journal of System Simulation

Abstract: For the data in feature space, traditional clustering algorithm can take clustering analysis directly. High-dimensional spatial data cannot achieve intuitive and effective graphical visualization of clustering results in 2D plane. Graph data can clearly reflect the similarity relationship between objects. According to the distance of the data objects, the feature space data are modeled as graph data by iteration. Cluster analysis based on modularity is carried out on the modeling graph data. The two-dimensional visualization of non-spherical-shape distribution data cluster and result is achieved. The concept of credibility of the clustering result is proposed, and a method is proposed, …


Equipment Rul Prediction Oriented Parallel Simulation Framework, Chenglong Ge, Yuanchang Zhu, Yanqiang Di, Zhiwei Hu, Zhihua Dong Jun 2018

Equipment Rul Prediction Oriented Parallel Simulation Framework, Chenglong Ge, Yuanchang Zhu, Yanqiang Di, Zhiwei Hu, Zhihua Dong

Journal of System Simulation

Abstract: As the equipment states are complicated with uncertainty, predicting remaining useful life with self-updating ability has become a hard task. Simulation provides an effective way to solve the problem. The concept and technology framework of equipment remaining useful life prediction oriented parallel simulation are proposed based on parallel system theory and the concept, characteristics, capacity demands and functional compositions of parallel simulation are introduced. The main modeling technologies of equipment remaining useful life prediction oriented parallel simulation are discussed, which include awareness of equipment degradation state, construction of equipment degradation state space model and evolution of equipment degradation state …


Matlab-Based Physical Real-Time Simulation Platform Of Pmsm In Intelligent Test System, Mengru Wang, Zhou Shan, Jinbo Wang, Panpan Xue Jun 2018

Matlab-Based Physical Real-Time Simulation Platform Of Pmsm In Intelligent Test System, Mengru Wang, Zhou Shan, Jinbo Wang, Panpan Xue

Journal of System Simulation

Abstract: As the physical objects cannot simulate multiple failure modes to cooperate with space controller test, a solution that establishing the real-time physics simulation platform which contains the controlled object and the control system is proposed in this paper. In this solution, we established permanent magnet synchronous motor vector control model using MATLAB /Simulink toolbox of System Generator, then implemented on FPGA; After hardware extension, a complete closed-loop test system is constructed with the DUT(controller) and the motor simulation model; the model has high pointing and tracking precision. Besides simulating motor's normal functions, the model's parameters can be changed …


Monkey Algorithm For Solving Logistics Center Location Selection Problem, Xiaoping Xu, Dongjie Zhang Jun 2018

Monkey Algorithm For Solving Logistics Center Location Selection Problem, Xiaoping Xu, Dongjie Zhang

Journal of System Simulation

Abstract: The location selection of logistics center is the most basic problem that affects the whole development of logistics center; an improved monkey algorithm is used to solve the problem. The basic idea is that the chaos variables are used to generate the initial feasible solution of the monkey algorithm, the decreasing factor is taken as the climbing step in the climbing process and a chaotic search method is introduced in the looking process to improve the performance of the algorithm. Through simulation experiment, the solution results of typical function and logistics center location problem are given to illustrate the …


Simulation Analysis Of Nearest Neighbor Searching For Anti-Ship Missile Target Selector Performance, Sun Jie, Tianyun Wang, Huanyao Dai, Cuiqiong Mo, Zhao Jing Jun 2018

Simulation Analysis Of Nearest Neighbor Searching For Anti-Ship Missile Target Selector Performance, Sun Jie, Tianyun Wang, Huanyao Dai, Cuiqiong Mo, Zhao Jing

Journal of System Simulation

Abstract: In view of that the current admission comparing searching mode is difficult to adapt to the offshore operation of anti-ship missile in multi target selection, the nearest neighbor selector applied to the target search scheme is put forward. By setting the typical searching situation, a target searching model is established; and on the basis of reasonable simplification, the nearest neighbor selector capture probability of display expression is deduced. Typical scenes in numerical simulation show that the scheme based on distance criterion for admission multiple targets for prioritization effectively improves the search performance of the target. A …