Nanoscience and Nanotechnology Commons^™

Colloidal Quantum Dot (Cqd) Based Mid-Wavelength Infrared Optoelectronics, Shihab Bin Hafiz

Dissertations

Colloidal quantum dot (CQD) photodetectors are a rapidly emerging technology with a potential to significantly impact today’s infrared sensing and imaging technologies. To date, CQD photodetector research is primarily focused on lead-chalcogenide semiconductor CQDs which have spectral response fundamentally limited by the bulk bandgap of the constituent material, confining their applications to near-infrared (NIR, 0.7-1.0 um) and short-wavelength infrared (SWIR, 1-2.5 um) spectral regions. The overall goal of this dissertation is to investigate a new generation of CQD materials and devices that advances the current CQD photodetector research toward the technologically important thermal infrared region of 3-5 ?m, known as …

Feedstock Powders For Reactive Structural Materials, Daniel Hastings

Dissertations

Metals as fuels have higher energy density per unit mass or volume compared to any hydrocarbon. At the same time, metals are common structural materials. Exploring metals as reactive structural materials may combine their high energy density with attractive mechanical properties. Preparing such materials, however, is challenging. Requirements that need to be met for applications include density, strength, and stability enabling the component to sustain the structure during its desired operation; added requirements are the amount and rate of the energy release upon impact or shock. Powder technology and additive manufacturing are approaches considered for design of reactive structural materials. …

Contact Angle Measurement Using A Hele-Shaw Cell: A Proof-Of-Concept Study, Haipeng Zhang, Jacob Gottberg, Sangjin Ryu

Department of Mechanical and Materials Engineering: Faculty Publications

Contact angle is an important property to quantify the wettability of a solid surface with a liquid, which characterizes interactions of the solid-liquid pair. Generally, to measure contact angle, special instruments such as a goniometer are necessary, but they are not readily available in certain research settings. In this study, an alternative method to measure contact angle based on a Hele-Shaw cell, microscopy imaging, and image processing is suggested. In this method, a liquid drop is injected into a transparent Hele-Shaw cell, the meniscus of the drop is captured in the top or bottom view using a brightfield microscope, and …

Preparation And Electrochemical Evaluation Of Mos2/Graphene Quantum Dots As A Catalyst For Hydrogen Evolution In Microbial Electrolysis Cell, Hong-Yan Dai, Hui-Min Yang, Xian Liu, Xiu-Li Song, Zhen-Hai Liang

Journal of Electrochemistry

Microbial electrolysis cell (MEC) is a relatively new bioelectrochemical technology that produces H₂ and meanwhile treats organic wastewater. Cathode hydrogen evolution catalyst plays a key role in MEC. The doping of Graphene Quantum Dots (GQDs) into MoS₂ nanosheets can improve the catalytic activity of MoS₂ by creating abundant defect sites both in the edge plane and the basal plane, as well as enhancing the electrical conductivity. In this paper, using Na₂MoO₄ , cysteine and GQDs as raw materials, a series of MoS₂/GQDs composites were firstly synthesized via hydrothermal method, and then loaded …

Storage Performance And Mechanism Of Mose2 Nanospheres In Lithium And Magnesium Ion Batteries, Yi Peng, Wei Zhang, Fang-Zhen Zuo, Hao-Ying Lv, Kai-Jun Hong

Journal of Electrochemistry

Molybdenum diselenide (MoSe₂) is a two-dimensional (2D) transition metal dichalcogenide (TMD) material, attracting wide attention in lithium ion battery (LIB) and exhibiting great potential in next-generation magnesium ion battery (MIB) due to its unique layered structure with fast ion mobility and weak van der Waals interlayer interaction. However, the reported literatures related to MoSe₂ mainly focus on the enhancement of performance in LIB without deep storage mechanisms investigations. Meanwhile,the magnesium storage capacity and mechanisms have not been explored. In this work, MoSe₂ nanospheres were synthesized via wet chemical route and followed by annealing treatment. When used …

Molecular Interfaces And Heterogeneous Bubble Nucleation From Heated Surfaces At Nanoscale, Manish Gupta

Dissertations - ALL

Heat transfer from a solid surface to fluid occurs in numerous applications, such as boilers, refrigerators, power electronics, etc., and include various underlying phenomena of thin-film evaporation, boiling, condensation, surface wetting, and droplet evaporation. Several studies show that heat transfer can be enhanced significantly by incorporating micro and nanoscale features onto surfaces. Phase change heat transfer plays an important role in dissipating energy from hot surfaces and distributing it to bulk liquid due to high latent heat of liquids. Boiling, a phase change heat transfer phenomenon, happens when the surface is heated to a temperature above the saturation temperature of …

Design And Development Of 2d Functional Semiconductor Nanocrystals, Andrew Hunter Davis

Dissertations - ALL

Anisotropic nanocrystals (NCs) have become of keen interest in recent years, especially for applications in optoelectronic devices due to their directionally oriented emissions, narrow emission spectra, and suitable morphologies for device integration. Of the desired anisotropic NCs, two-dimensional (2D) NCs are of profound interest, due to their impressive optical and electronic properties as well as their prospective advantages towards applications in layered optoelectronic devices, such as solar cells. However, 2D NCs face many challenges, including limited synthetic derivation, as well as decreased stability and optical response, due to their large surface-to-volume ratio and reactive planar surface increasing surface defect state …

Contact Angle Measurement Using A Hele-Shaw Cell: A Proof-Of-Concept Study, Haipeng Zhang, Jacob Gottberg, Sangjin Ryu

Department of Mechanical and Materials Engineering: Faculty Publications

Contact angle is an important property to quantify the wettability of a solid surface with a liquid, which characterizes interactions of the solid-liquid pair. Generally, to measure contact angle, special instruments such as a goniometer are necessary, but they are not readily available in certain research settings. In this study, an alternative method to measure contact angle based on a Hele-Shaw cell, microscopy imaging, and image processing is suggested. In this method, a liquid drop is injected into a transparent Hele-Shaw cell, the meniscus of the drop is captured in the top or bottom view using a brightfield microscope, and …

Vortex-Oriented Ferroelectric Domains In Snte/Pbte Monolayer Lateral Heterostructures, Kai Chang, John W. D. Villanova, Jing-Rong Ji, Souvik Das, Felix Kuster, Salvador Barraza-Lopez, Paolo Sessi, Stuart S. P. Parkin

Physics Faculty Publications and Presentations

Heterostructures formed from interfaces between materials with complementary properties often display unconventional physics. Of especial interest are heterostructures formed with ferroelectric materials. These are mostly formed by combining thin layers in vertical stacks. Here the first in situ molecular beam epitaxial growth and scanning tunneling microscopy characterization of atomically sharp lateral heterostructures between a ferroelectric SnTe monolayer and a paraelectric PbTe monolayer are reported. The bias voltage dependence of the apparent heights of SnTe and PbTe monolayers, which are closely related to the type-II band alignment of the heterostructure, is investigated. Remarkably, it is discovered that the ferroelectric domains in …

Converting Parylene C Into A Thin Film Piezoelectric Material, Murali Manohar Duggina

Nanoscience and Microsystems ETDs

Thin-film piezoelectric materials are increasing in demand, but most materials are stiff ceramic materials. Polyvinylidene fluoride (PVDF) is a common polymer piezoelectric material, but it has limitations such as it requires post-processing steps to promote appropriate β-phase and it has a low operating and Curie Temperature, which limits its use in traditional microfabrication processing. The toxicity of PZT makes it incompatible with biomedical applications. Therefore, there is a need to develop a new class of polymer piezoelectric films that are compatible with current microfabrication methods. Parylene C (PA-C) is a chemical vapor deposited semi-crystalline polymer material with a nonsymmetric polymer …

Methods , Systems , And Devices Relating To Surgical End Effectors, Shane M. Farritor, Thomas Frederick, Joe Bartels

Department of Mechanical and Materials Engineering: Faculty Publications

The embodiments disclosed herein relate to various medical device components , including components that can be incorporated into robotic and / or in vivo medical devices, and more specifically including end effectors that can be incorporated into such devices. Certain end effector embodiments include various vessel cautery devices that have rotational movement as well as cautery and cutting functions while maintaining a relatively compact structure. Other end effector embodiments include various end effector devices that have more than one end effector.

Simulation Of Light Propagation Captured By Photoemission Electron Microscopy (Peem), Nabila Islam

Dissertations and Theses

The Photoemission electron microscopes (PEEM) is a powerful tool capable of synchronously imaging wave nature of light manifested by interference patterns as well as its particle nature through the energy exchange between the incident photons and the photoemitted imaging electrons. PEEM offers a non-invasive high-resolution approach for studying light propagation and interaction phenomena within a nanophotonic waveguide [7,8]. The electric field intensity variation of the interference pattern yielded by the interaction between the incident light and the guided mode coupled into the waveguide produces varying photoemission yields creating contrast in PEEM image. The guided modes cannot be excited simply by …

Robotic Surgical Devices , Systems , And Related Methods, Shane Farritor, Erik Mumm, Philip Chu, Nishant Kumar, Jason Dumpert, Yutaka Tsutano

Department of Mechanical and Materials Engineering: Faculty Publications

The embodiments disclosed herein relate to various medical device components, including components that can be incorporated into robotic and / or in vivo medical devices. Certain embodiments include various modular medical devices for in vivo medical procedures.

In Vivo Printing Of Growth Factor-Eluting Adhesive Scaffolds Improves Wound Healing, Kristo Nuutila, Mohamadmahdi Samandari, Yori Endo, Yuteng Zhang, Jacob Quint, Tannin A. Schmidt, Ali Tamayol, Indranil Sinha

Department of Mechanical and Materials Engineering: Faculty Publications

Acute and chronic wounds affect millions of people around the world, imposing a growing financial burden on patients and hospitals. Despite the application of current wound management strategies, the physiological healing process is disrupted in many cases, resulting in impaired wound healing. Therefore, more efficient and easy-to-use treatment modalities are needed. In this study, we demonstrate the benefit of in vivo printed, growth factor-eluting adhesive scaffolds for the treatment of full-thickness wounds in a porcine model. A custom-made handheld printer is implemented to finely print gelatin-methacryloyl (GelMA) hydrogel containing vascular endothelial growth factor (VEGF) into the wounds. In vitro and …

Fabrication And Characterization Of Photodetector Devices Based On Nanostructured Materials: Graphene And Colloidal Nanocrystals, Wafaa Gebril

Graduate Theses and Dissertations

Photodetectors are devices that capture light signals and convert them into electrical signals. High performance photodetectors are in demand in a variety of applications, such as optical communication, security, and environmental monitoring. Among many appealing nanomaterials for novel photodetection devices, graphene and semiconductor colloidal nanocrystals are promising candidates because of their desirable and unique properties compared to conventional materials.

Photodetector devices based on different types of nanostructured materials including graphene and colloidal nanocrystals were investigated. First, graphene layers were mechanically exfoliated and characterized for device fabrication. Self-powered few layers graphene phototransistors were studied. At zero drain voltage bias and room …

The Impact Of Nanopulse Treatment On The Tumor Microenvironment In Breast Cancer: Overturning The Treg Immunosuppressive Dominance, Anthony Nanajian

Biomedical Sciences Theses & Dissertations

Nanopulse treatment (NPT) is a high-power electric engineering modality that has been shown to be an effective local tumor treatment approach in multiple cancer models. Our previous studies on the orthotopic 4T1-luc breast cancer model demonstrated that NPT ablated local tumors. The treatment consequently conferred protection against a second live tumor challenge and minimized spontaneous metastasis. This study aims to understand how NPT mounts a potent immune response in a predominantly immunosuppressive tumor.

NPT changed the local and systemic dynamics of immunosuppressive cells by significantly reducing the numbers of regulatory T cells (Tregs), myeloid-derived suppressor cells (MDSCs), and tumor-associated macrophages …

Molecular Dynamics Simulations Of Ion Transport Through Electrically Stressed Biological Membranes, Federica Castellani

Biomedical Engineering Theses & Dissertations

The cell membrane is a selectively permeable barrier that controls the transport of ions, molecules, and other materials into and out of a cell. The manipulation of the cell membrane permeability is the basis for several biotechnological and biomedical applications, including electroporation. Electroporation (or electropermeabilization) occurs when the application of an external electric pulse causes water intrusion into the membrane interior and the formation of conductive transmembrane electropores. These electropores allow drugs, genetic material, and other normally impermeant molecules to enter a cell. Despite years of study, the complex mechanisms underlying this process are still not well understood. Molecular dynamics …

Investigation Of Iron-Nickel Based Nanoparticles As Catalysts For Oxygen Evolution Reaction (Oer), Prashant Acharya

Graduate Theses and Dissertations

Hydrogen fuel is increasingly seen as an appealing alternative by both the scientific and the industrial communities in the drive towards a clean energy future. Hydrogen, unlike fossil-based fuels, does not release carbon dioxide, a chief component of greenhouse gases, upon combustion. However, more than 95% of the hydrogen in the world is still produced by burning fossil fuels as this method is currently the only economically feasible option at a large industrial scale.

Water electrolysis shows a lot of potential in both hydrogen generation and in the storage of energy from renewable sources such as wind and sunlight. Likewise, …

Comparative Study Of Nano-Rod And Nano-Sphere Based Localized Surface Plasmon Resonance Refractive Index Biosensors, Mariam M. Moussilli M. M. Moussilli, Abdul Rahman El Falou

BAU Journal - Science and Technology

Localized Surface Plasmon Resonance (LSPR) waves generated by the interaction of light with noble metal nanoparticles has been of great interest in recent years due to the high sensitivity of the extinction spectra of these nanoparticles to the medium's surrounding refractive index up to the atomic level.

In this article, we simulate the extinction spectra of noble metal sphere and rod nanoparticles in order to study the effect of the geometrical shape and size of the nanoparticle on the sensitivity and detection accuracy performance parameters of the extinction spectra. We also simulated the response of the sphere and rod nanoparticle's …

Control Of Change Of Phase Through Physical Surface Shaping, Troy Anderson, Sidy Ndao, Craig Zuhlke, Dennis Alexander, George Gogos

Department of Mechanical and Materials Engineering: Faculty Publications

A system embodiment includes , but is not limited to , a solid structure configure to contact each of a material in a liquid phase and a material in a vapor phase , the solid structure including a plurality of microstructures protruding at angles relative to a horizontal plane ; and a layer of nanoparticles positioned on the plurality of microstructures , the layer of nanoparticles having a composition that is at least one of a same material as the plurality of microstructures and an oxide of the same material as the plurality of microstructures , the plurality of microstructures …

Synthesis And Electrochemical Study Of Cuau Nanodendrites For Co2 Reduction, Dylan Siltamaki, Shuai Chen, Farnood Rahmati, Jacek Lipkowski, Ai-Cheng Chen

Journal of Electrochemistry

The conversion of carbon dioxide (CO₂) to carbon monoxide (CO) and other value-added products is an interesting approach for carbon-containing fuel synthesis using renewable and clean energy. The electrochemical reduction of CO₂ is one of the promising strategies for the storage of intermittent renewable energy resources. The development of electrocatalysts with high activity and stability is vital in the electrochemical CO₂ reduction process. In this study, copper and gold alloyed (CuAu) electrodes with nanodendritic structures were synthesized using a facile electrodeposition method. The CuAu nanodendrites with the atomic ratio of Cu to Au being approximately 1:1 …

Studies And Progresses On Hole Metallization In High-Density Interconnected Printed Circuit Boards, Zhao-Yun Wang, Lei Jin, Jia-Qiang Yang, Wei-Qing Li, Dong-Ping Zhan, Fang-Zu Yang, Shi-Gang Sun

Journal of Electrochemistry

Printed circuit boards (PCBs) are almost the core components of all electronic systems. With the rapid development of sciences and technologies, PCBs are gradually developing in the direction of multi-layer, thin and high-density wiring due to the functionalization, miniaturization, lightweight and high reliability of electronic products, as well as the widespread popularization of the subminiature package such as chip scale package (CSP) and ball grid array (BGA). Therefore, High-density interconnected printed circuit boards (HDI-PCBs) arise. Hole metallization is one of the core technologies in HDI-PCBs and includes two processes composed of conductive treatment and electron electroplating. Electroless copper plating, as …

Minimally Invasive Delivery Of 3d Shape Recoverable Constructs With Ordered Structures For Tissue Repair, Shixuan Chen, Mark Alan Carlson, Xiaowei Li, Aleem Siddique, Wuqiang Zhu, Jingwei Xie

Department of Mechanical and Materials Engineering: Faculty Publications

Minimally invasive procedures are becoming increasingly more common in surgery. However, the biomaterials capable of delivering biomimetic, three-dimensional (3D) functional tissues in a minimally invasive manner and exhibiting ordered structures after delivery are lacking. Herein, we reported the fabrication of gelatin methacryloyl (GelMA)-coated, 3D expanded nanofiber scaffolds and their potential applications in minimally invasive delivery of 3D functional tissue constructs with ordered structures and clinically appropriate sizes (4 cm × 2 cm × 1.5 mm). GelMA-coated, expanded 3D nanofiber scaffolds produced by combining electrospinning, gas-foaming expansion, hydrogel coating, and crosslinking are extremely shape recoverable after release of compressive strain, displaying …

Mathematical Model For Measuring The Concentration Of Nanoparticles In A Liquid During Sedimentation, Safaa Mohammed Ridha Hussien Hussien, Airat Sakhabutdinov, Vladimir Anfinogentov, Maxim Danilaev, Vladimir Kuklin, Oleg Morozov

Karbala International Journal of Modern Science

Expanding the application areas of polymer composite materials with dispersed filler requires the development of technologies providing the required mechanical characteristics. One of these methods is based on forming a thin polymer shell on the surfaces of particles. At the same time, it is impossible to take into account the mechanical characteristics of a thin polymer shell due to its ultra-small thickness. The mechanical properties of the polymer shell can be determined only by indirect methods, and prior information can improve the adequacy of the properties determination. The method, which allows reducing the requirements for composite sample preparation, is proposed. …

Investigations Into Size And Surface Control Of Silicon Nanocrystals For Improved Optical Properties, James Donald Barnes

Dissertations and Theses

The discovery of visible photoluminescence (PL) from nanocrystalline porous silicon in 1990 led to extensive research into the mechanisms of the emergent properties, and optimization of these properties, for use in applications. The widespread use of silicon nanoparticles (Si NPs) in commercial applications is currently limited by three main factors: 1) poor radiative recombination efficiency of the interband transition, 2) instability of the interband photoluminescence, and 3) a lack of scalable methods for producing Si NPs that are both highly crystalline and size monodisperse.

To address these limitations, this dissertation correlates changes in the photoluminescence properties of hydrogen passivated silicon …

Quantum Transport Of The 2d Surface State In A Nonsymmorphic Semimetal, Xue Liu, Jin Hu, Jiang Wei, Chunlei Yue, Sergey V. Erohin, Yanglin Zhu, Abin Joshy, Jinyu Liu, Ana M. Sanchez, David Graf, Pavel B. Sorokin, Zinqiang Mao

Physics Faculty Publications and Presentations

In a topological semimetal with Dirac or Weyl points, the bulk-boundary correspondence principle predicts a gapless edge mode if the essential symmetry is still preserved at the surface. The detection of such topological surface state has been considered as the fingerprint prove for crystals with nontrivial topological bulk band. On the contrary, it has been proposed that even with symmetry broken at the surface, a new surface band can emerge in nonsymmorphic topological semimetals. The symmetry reduction at the surface lifts the bulk band degeneracies and produces an unusual “floating” surface band with trivial topology. Here, we first report quantum …

Maize Tassel Detection From Uav Imagery Using Deep Learning, Aziza Alzadjali, Mohammed H. Alali, Arun Narenthiran Weeranampalayam Sivakumar, Jitender S. Deogun, Stephen Scott, James C. Schnable, Yeyin Shi

Department of Mechanical and Materials Engineering: Faculty Publications

The timing of flowering plays a critical role in determining the productivity of agricultural crops. If the crops flower too early, the crop would mature before the end of the growing season, losing the opportunity to capture and use large amounts of light energy. If the crops flower too late, the crop may be killed by the change of seasons before it is ready to harvest. Maize flowering is one of the most important periods where even small amounts of stress can significantly alter yield. In this work, we developed and compared two methods for automatic tassel detection based on …

Optical Engineering Of Iii-Nitride Nanowire Light-Emitting Diodes And Applications, Ha Quoc Thang Bui

Dissertations

Applications of III-nitride nanowires are intensively explored in different emerging technologies including light-emitting diodes (LEDs), laser diodes, photodiodes, biosensors, and solar cells. The synthesis of the III-nitride nanowires by molecular beam epitaxy (MBE) is investigated with significant achievements. III-nitride nanowires can be grown on dissimilar substrates i.e., silicon with nearly dislocation free due to the effective strain relaxation. III-nitride nanowires, therefore, are perfectly suited for high performance light emitters for cost-effective fabrication of the advanced photonic-electronic integrated platforms. This dissertation addresses the design, fabrication, and characterization of III-nitride nanowire full-color micro-LED (µLED) on silicon substrates for µLED display technologies, high-efficient …

Controlled Reduction Of Graphene Oxide And Graphene Oxide-Carbon Nanotube Hybrids And Their Applications, Samar Azizighannad

Dissertations

Graphene and graphene derivatives are widely used in diverse research and industrial applications. Graphene production on a large scale is carried out by exfoliating graphite oxide and producing graphene oxide (GO), which comprises of graphene sheets with different oxygen-containing functional groups such as hydroxyl, carboxyl, and carbonyl. GO is reduced to reduced graphene oxide (rGO), which has properties that are closer to graphene. Properties of GO and rGO depend upon the oxygen content, and the effect of reducing oxygen content on the aqueous behavior of rGOs is not well understood.

In an effort to understand how properties of rGO change …

Uavs For Vegetation Monitoring: Overview And Recent Scientific Contributions, Ana I. De Castro, Yeyin Shi, Joe Mari Maja, Jose M. Pena

Department of Mechanical and Materials Engineering: Faculty Publications

This paper reviewed a set of twenty-one original and innovative papers included in a special issue on UAVs for vegetation monitoring, which proposed new methods and techniques applied to diverse agricultural and forestry scenarios. Three general categories were considered: (1) sensors and vegetation indices used, (2) technological goals pursued, and (3) agroforestry applications. Some investigations focused on issues related to UAV flight operations, spatial resolution requirements, and computation and data analytics, while others studied the ability of UAVs for characterizing relevant vegetation features (mainly canopy cover and crop height) or for detecting different plant/crop stressors, such as nutrient content/deficiencies, water …