Nanoscience and Nanotechnology Commons^™

Measurement And Modeling Of Light Transmission Through Turbid Media, Alois (Al) J. Adams, Michael Fahrenwald, Long Do

Journal of the Arkansas Academy of Science

No abstract provided.

Low Voltage And Fast Speed All-Polymeric Optocouplers, Yan Yao, Hsiang-Yu Chen, Jinsong Huang, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

An all-polymeric optocoupler has been demonstrated with a polymer light-emitting diode (PLED) as the light source (input unit) and a polymer/fullerene photodiode (PD) as the detector (output unit). The electroluminescence (EL) peak of the PLED is 560 nm, and the entire EL spectrum is within the response range of the PD. The optocoupler can work at low driving voltages, 5 V on the PLED and 0 V on the PD. The output photocurrent increases linearly with input current, and the current density transfer ratio reaches 1.5%. The frequency response of the optocoupler is at 500 kHz. With comparable performance to …

Origin Of Photomultiplication In C60 Based Devices, Jinsong Huang, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

In this manuscript, the origin of the photomultiplication effect was studied in C₆₀ based devices by evaluating the wavelength dependent external and internal quantum efficiencies under various biases. The effect of materials with disordered structures on the photomultiplication effect was determined by intentionally integrating both ordered and disordered material structures into one organic solar cell device with a configuration of indium tin oxide/poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS)/pentacene/C₆₀ fullerene/bathocuproine (BCP)/Al. Our results show that both the disordered structure of C₆₀ and the charge trapping effect at the C₆₀ /PEDOT:PSS interface contribute to the photomultiplication effect. By studying the C60-only …

Deck-Mounted Steel Post Barrier System, John D. Reid, Ronald K. Faller, Jason A. Hascall

Department of Mechanical and Materials Engineering: Faculty Publications

An existing mountable safety barrier system, previously crash tested successfully on a wood bridge deck, was evaluated for use on a fiber reinforced plastic (FRP) bridge deck. In an attempt to avoid expensive full-scale crash testing, components of the existing system were evaluated using worst case conditions on two dynamic bogie crash tests and a series of computer simulations using nonlinear finite-element analysis. Simulation results closely approximated the physical results, with both displaying similar deformation, damage, and force levels. Both testing and simulation demonstrated that the barrier should function sufficiently if used on the FRP deck system. Further, the development …

Regional Mechanical Properties And Stress Analysis Of The Human Anterior Lens Capsule, Ryan M. Pedrigi, G. David, J. Dziezyc, J. D. Humphrey

Department of Mechanical and Materials Engineering: Faculty Publications

The lens capsule of the eye functions, in part, as a deformable support through which the ciliary body applies tractions that can alter lens curvature and corresponding refractive power during the process of accommodation. Although it has long been recognized that characterization of the mechanical properties of the lens capsule is fundamental to understanding this physiologic process as well as clinical interventions, prior data have been limited by one-dimensional testing of excised specimens despite the existence of multiaxial loading in vivo. In this paper, we employ a novel experimental approach to study in situ the regional, multiaxial mechanical behavior of …

A Scientific Foundation Of Collaborative Engineering, S. C.-Y. Lu, W. Elmaraghy, G. Schuh, R. Wilhelm

Department of Mechanical and Materials Engineering: Faculty Publications

Collaborative engineering is the practical application of collaboration sciences to the engineering domain. In today’s highly connected technology-driven economy, the production industry must rely on the best practices of collaborative engineering to stay competitive when designing, manufacturing, and operating complex machines, processes, and systems on a global scale. Despite its importance, collaborative engineering is currently more of a practiced art than a scientific discipline. A better understanding of how engineers should collaborate with all stakeholders to accomplish complex tasks that fulfill our increasing social responsibilities is a grand challenge. However, because we currently lack well-defined sciences of human collaboration, we …

Ultrasonic Characterization Of Microstructure Evolution During Processing, Liyong Yang, Joseph A. Turner, Zheng Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

Many cold-working processes for polycrystalline metals cause alignment of the grains with a single symmetry axis. This type of microstructure is called fiber texture. The existence of a preferred orientation of the grains has a significant influence on the propagation and scattering of ultrasonic waves, which are often used for material inspection. Knowledge of the wave attenuation of such textured materials is of both theoretical and practical interest to nondestructive testing and materials characterization. In this article, the quantitative relations between fiber texture and wave attenuations of hexagonal crystals are presented. The texture is characterized by a Gaussian distribution function …

Modeling Redox-Based Magnetohydrodynamics In Three-Dimensional Microfluidic Channels, Hussameddine S. Kabbani, Aihua Wang, Xiaobing Luo, Shizhi Qian

Mechanical Engineering Faculty Research

RedOx-based magnetohydrodynamic MHD[1] flows in three-dimensional microfluidic channels are investigated theoretically with a coupled mathematical model consisting of the Nernst-Planck equations for the concentrations of ionic species, the local electroneutrality condition for the electric potential, and the Navier-Stokes equations for the flow field. A potential difference is externally applied across two planar electrodes positioned along the opposing walls of a microchannel that is filled with a dilute RedOx electrolyte solution, and a Faradaic current transmitted through the solution results. The entire device is positioned under a magnetic field which can be provided by either a permanent magnet or an electromagnet. …

Development Of Nanostructure Based Corrosion-Barrier Coatings On Steel For Transmutation Applications, Biswajit Das

Transmutation Sciences Materials (TRP)

Advanced transmutation systems require structural materials that are able to withstand high neutron fluxes, high thermal cycling, and high resistance to chemical corrosion. The current candidate materials for such structures are ferritic and ferritic-martensitic steels due to their strong resistance to swelling, good microstructural stability under irradiation, and the retention of adequate ductility at typical reactor operating temperatures.

In parallel, lead-bismuth eutectic (LBE) has emerged as a potential spallation target material for efficient production of neutrons, as well as a coolant in the accelerator system. While LBE has excellent properties as a nuclear coolant, it is also highly corrosive to …

A Simple Sol-Gel Processing For The Development Of High-Temperature Stable Photoactive Anatase Titania, Suresh Pillai, Declan Mccormack, John Colreavy

Articles

No abstract provided.

Physiochemical Indicators Of Single Walled Carbon Nanotube Toxicity, Alan Casey

Doctoral

Numerous toxicity studies have been conducted to date both in vivo and in vitro on refined and raw Single Walled Carbon Nanotubes (SWCNT). Differences in SWCNT toxicity and biocompatibility have been observed between these studies, and whilst these discrepancies have been attributed to factors such as varying percentages of remnant catalytic particles, differences in dispersion methods etc. the mechanisms underlying these inconsistencies have not been investigated. This study used standard spectroscopic and cellular techniques to elucidate the origins of these inconsistencies and also to estimate the validity of toxicological data evaluated form standard cytotoxic endpoints. Spectroscopic studies were conducted in …

Wave Propagation In Nanofibers, Xiangfa Wu, Yuris A. Dzenis

Nebraska Center for Materials and Nanoscience: Faculty Publications

Surface effect on the longitudinal and flexural wave propagation in straight nanofibers/nanowires is studied within the framework of continuum mechanics. Modified Euler-Bernoulli and Rayleigh-Love rod equations and modified Timoshenko beam equation were developed to take into account the surface effect. It was found that surface tension/stress plays appreciable influence on the wave propagation in nanofibers/nanowires at very small diameters. Wave dispersion relations were presented in closed form, and numerical calculations were performed to show the variation of the phase velocity with the wave number at varying surface property and fiber diameter. The given results can be used as the theoretical …

Single-Sided Crash Cushion System, John D. Reid, John R. Rohde, Dean L. Sicking

Department of Mechanical and Materials Engineering: Faculty Publications

A single-sided crash attenuation cushion system having an impact head and three stage energy absorption mechanism. The energy absorbing mechanism has a mandrel for deforming thin-walled tubes in a controlled collapse to absorb impact forces from a colliding vehicle. The third stage of the absorption mechanism includes an additional deformable compressible tube between the fixed-object hazard and the thin walled tubes.

Effect Of Nb And C Additives On The Microstructures And Magnetic Properties Of Rapidly Solidified Sm-Co Alloys, S. Aich, Jeffrey E. Shield

Nebraska Center for Materials and Nanoscience: Faculty Publications

Highly coercive Sm-Co-based permanent magnets have been achieved through simple modification of binary Sm_{12Co88 alloys with Nb, C or combined Nb and C at concentrations ranging from 1 to 10 atomic percent processed via rapid solidification. Melt spinning at 40 m/s resulted in the formation of the metastable TbCu7-type structure in all alloys. While the unalloyed, as-solidified Sm12Co88 alloy displayed a coercivity of 0.5 kOe, alloying additions resulted in a systematic and profound increase in coercivity. Nb additions resulted in as-solidified coercivities up to 9 kOe, C additions up to 37 kOe, and combined NbC …}

Preparation And Electrochemical Property Of Bam Boo-Shaped Silicon Nanotubes, Zeng-Tao Liu, Yan-Peng Fu, Chen Li, Yong Yang

Journal of Electrochemistry

A novel 1D bamboo-shaped silicon nanotubes was synthesized by chemical vapor deposition with Au catalyst and their electrochemical properties were primarily studied.The results showed that these silicon nanotubes were amorphous with the length about tens micrometer and the diameter about one hundred nanometer.Cyclic voltammetry studies showed that Li ions could intercalate into such silicon nanotubes at two location,i.e.,from the conjoint location and the wall of the hole.Meanwhile,the bamboo-shaped structure could help release the expansion of volume,which is usually serious in the lithium batteries.

Preparation And Electrochemical Characterization Of Anatase Tio2 Nanotubes, Bin Cao, Jin-Wei Xu, Ling-Hong Ding, Wei-Feng Zhang

Journal of Electrochemistry

Titanium oxide nanotubes were prepared by hydrothermal treatment of anatase-type TiO₂ powders and NaOH solution in an autoclave.Transmission Electron Microscopy and X-ray Diffraction showed that the product is anatase-type TiO₂ nanotubes.The constant charge-discharge current and cyclic voltammetry exhibited the TiO₂ nanotubes have a large initial lithium insertion capacity of 260 mA·h/g and good reversibility.This study indicates that TiO₂ nanotubes might be a good negative electrode materical for second lithium battery in the future.

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan, Xiao-Kai Zhang, Ming-Hu Huang, Shao-Xin Huang, Xing-Li Feng, Hou-Yi Ma

Journal of Electrochemistry

Gold nanocrystals with controllable size were synthesized through a simple electroreduction method using poly(N-vinylpyrrolidone)(PVP) of different polymerization degree as both stabilizer and shape-controller for gold nanoclusters.Individual gold nanoparticles spontaneously assembled into the wire-and ring-shaped nanoparticle aggregates depending on the PVP's dynamic stretching and curling,and precursor nanoparticles grew into flat,single-crystalline nanoprisms with thickness of dozens of nanometers based on the oriented aggregation between particles.Besides,core-shell Au/Ag nanoparticles were conveniently synthesized through two-step electroreduction of noble metal ions in the presence of PVPK30.The electrochemical synthetic method based on PVP provides a new path for preparation of noble metal nanostructured materials with different shape …

Phase-Transfer Technique For Polymer-Protected Noble Metal Nanoparticles, Xing-Li Feng, Ming-Hui Huang, Xiao-Kai Zhang, Shao-Xin Huang, Wei Pan, Hou-Yi Ma

Journal of Electrochemistry

A novel phase-transfer method was developed based on the decrease of PVP's solubility in water with increasing temperature,by means of which PVP-protected gold,silver and platinum nanoparticles can be conveniently transferred from aqueous phase to 1-butanol phase.Monodispersed metal nanoparticles were electrochemically synthesized at first in the aqueous,and then 1-butanol of appropriate volume was added to the aqueous phase.Heating the oil-water mixture to 80 ℃ under vigorous stirring would make metal nanoparticles leave the aqueous phase and enter into the 1-butanol phase,with high phasetransfer efficiency and without aggregation between nanoparticles.An electrochemical method to synthesize metal nanoparticles in the oil-water mixtures was further …

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma

Journal of Electrochemistry

Powder micro-electrodes were prepared from raw carbon nanotubes and carbon nanotubes modified by carboxyl.The electro-reduction properties of both the raw and open-ended carbon nanotubes in p-Nitrophenol solution were investigated.The FTIR spectrum result indicated that the functional groups are successfully fixed on the surface of the carbon nanotubes after nitric acid treatment.The cyclic voltammetry results show that the electrochemical activity of carboxyl-modified carbon nanotubes was improved.The mechanism of electro-(reduction) for the carbon nanotubes after acid treatment was discussed.

Stm Tip-Induced Nanostructuring-Replacement Method To Construct Pt Surface Nanostructures, Jin-Gang Wang, Jing Tang, Zhao-Bin Chen, Bing-Wei Mao

Journal of Electrochemistry

STM tip-induced surface nanostructuring based on "Jump-to-contact" mechanism is a nanostructuring technique that has the highest resolution in aqueous solutions.However,for metals that have high cohesive energy,atoms would transfer from surface to tip instead,which limits the wide application of this technique.In this paper,we present a two-step Nanostructuring-Replacement method to construct metal nanoclusters that cannot be obtained directly via the "Jump-to-contact" mechanism.The method is demonstrated to construct Pt nanoclusters that are of great interest in catalysis and electrocatalysis but cannot be constructed via the "Jump-to-contact" mechanism.Since Cu is the most intensively studied and successful system in the tip-induced nanostructuring,it is utilized as …

Transmission Electron Goniometry And Its Relation To Electron Tomography For Materials Science Apoplications, Peter Moeck, P. Fraundorf

Physics Faculty Publications and Presentations

Aspects of transmission electron goniometry are discussed. Combined with high resolution phase contrast transmission electron microscopy (HRTEM) and atomic resolution scanning TEM (STEM) in the atomic number contrast (Z-STEM) or the phase contrast bright field mode, transmission electron goniometry offers the opportunity to develop dedicated methods for the crystallographic characterization of nanocrystals in three dimensions. The relationship between transmission electron goniometry and electron tomography for materials science applications is briefly discussed. Internet based java applets that facilitate the application of transmission electron goniometry for cubic crystals with calibrated tilt-rotation and double-tilt specimen holders/goniometers are mentioned. The so called cubic-minimalistic tilt …

Investigation Of Device Parameters For Field-Effect Dna-Sensors By Three-Dimensional Simulation, Eddie Howell, Clemens Heitzinger, Gerhard Klimeck

Other Nanotechnology Publications

The development of a DNA field-effect transistor (DNAFET) simulator is described and implications on device structure and future experiments are discussed. In DNAFETs the gate structure is replaced by a layer of immobilized single-stranded DNA molecules which act as surface probe molecules [1, 2]. When complementary DNA strands bind to the receptors, the charge distribution near the surface of the device changes, modulating current transport through the device and enabling detection (cf. Fig. 1 and 5). Arrays of DNAFETs can be used for detecting singlenucleotide polymorphisms and for DNA sequencing. The advantage of DNAFETs over optical methods of detection is …

Jecp—A Java Electron Crystallography Project, Xingzhong Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

JECP stands for a java electron crystallography project that includes a series of practical java stand-alone programs for electron diffraction/microscopy and crystallography applications. The aim of the JECP project is twofold, i) as teaching tools to show students the principles of electron diffraction/microscopy and crystallography, ii) as research tools to analyze experimental results. Although there are commercial and public domain computer programs available that allow a user to simulate electron diffraction patterns or processing HREM images, there are always situations when we need to perform operations that are not a feature of any of the existing programs. The programs in …

Immobilization Of Cytochrome C On The Surface Of Single-Wall Carbon Nanotube And Its Direct Electron Transfer And Electrocatalysis, Ya-Jing Yin, Ya-Fen Lv, Ping Wu, Pan Du, Yan-Mao Shi, Chen-Xin Cai

Journal of Electrochemistry

Cytochrome c(Cyto c) was immobilized on the surface of the single-wall carbon nanotube(SWNT) by using the method of adsorption.Infrared spectroscopy indicated that the Cyto c remained in its original structure and did not undergo structural change after its immobilization on the SWNT.The direct electrochemistry of cyto c,which was adsorbed on the surface of the SWNT,was studied by cyclic voltammetry.The voltammetric results demonstrated that the SWNT had promoting effects on the direct electron transfer of Cyto c and also indicated that the immobilized Cyto c retained its bioelectrocatalytic activity to the reduction of H₂O₂.This modified electrode might …

Pre-Oxidative Amperometric Glucose Biosensor Incorporated With Carbon Nanotube And Pbo2, Hong-Lan Qi, Cheng-Xiao Zhang

Journal of Electrochemistry

A pre-oxidative amperometric glucose biosensor incorporated with carbon nanotube,ferrocenemonocarboxylic acid and PbO₂ was designed.The interferences coming from reduced substances,such as ascoribic acid and urine acid were eliminated by PbO₂.The oxidative current is linear at the potential of +0.40 V(vs.SCE) to the concentration of glucose in the range from 0.50 to 20 mmol·L^-1,and the detection limit of glucose is 0.1 mol L^-1.The relative standard deviation is 3.3% for seven successive assays at 5.0 mmol·L^-1glucose.This biosensors have been applied to determination of the glucose in serum with satisfying results.

The Electrochemical Study On Self-Assembled Monolayers Of Sodium Stearate Surfactant On Oil/Water Interface, Li-Na Tang, Feng-Ping Wang, Yong-Chun Zhu

Journal of Electrochemistry

The self-assembled monolayers of sodium stearate surfactant on oil/water interface was investigated by CV with copper ion as probe.The self-assembling process includes four stages,and forms a stable assembly.The electrochemical oxidation of copper ion at assembled surface is a combine controlled process both surface and diffusion with regression equation as i_p = 9.214-3.889 v^1/2 +0.5809v,r=0.9978,compared with the oil covered bared electrode,it is a complete surface controlled.

Investigation On The Resistance To Electrochemical Oxidation Of Carbon Nanotubes With Various Diameters, Yu-Yan Shao, Ge-Ping Yin, Yun-Zhi Gao, Peng-Fei Shi

Journal of Electrochemistry

The resistance to electrochemical oxidation of multi-wall carbon nanotubes(CNT) with various diameters is investigated by applying a fixed potential of 1.2 V(RHE) for 120 h in 0.5 mol L^-1 H₂SO₄.The oxidation current of CNTs decreases with their diameters,but CNTs between 10~20 nm in diameter(D1020) shows the lowest oxidation current.XPS analysis shows that,after oxidation,the increase in surface oxygen for D1020 is the smallest,implying that the oxidation degree for D1020 is the lowest.The conclusion can be reached that CNTs between 10~20 nm in diameter are the most resistant to electrochemical oxidation.The difference in electrochemical stability of CNTs …

Electrodeposition Of Nano-Sb-Zn Alloy In Acetamide-Urea-Nabr-Kbr Melt, Peng Liu, Xin-Ai Guo, Ye-Xiang Tong, Qi-Qin Yang

Journal of Electrochemistry

The electroreduction of Zn(II) and Sb(III) in acetamide-urea-NaBr-KBr(343 K) were studied by cyclic volatmmetry.The reduction of Zn(II) or Sb(III) to the metals is an irreversible process.The transfer coefficient of Zn(II)+2e→Zn and Sb(III) +3e→Sb were calculated to be 0.231 and 0.319,the diffusion coefficient of Zn(II) and Sb(III) in the melt were determined as 1.70*10^-6 and 3.21*10^-6 cm²· s^-1 respectively.The Zn-Sb films with different Zn content from 29.67 at% to 97.34 at% were electrodeposited in acetamide-urea-NaBr-KBr melt at 343 K by controlling the deposition potential and the Zn(II)/Sb(III) molar ratio.The morphology of Zn-Sb film was observed by …

End Splice Assembly For Box-Beam Guardrail And Terminal Systemis, John D. Reid, John R. Rohde, Dean L. Sicking, King K. Mak

Department of Mechanical and Materials Engineering: Faculty Publications

An end splice assembly for a box-beam guardrail and terminal system having a first stage rail element and a second stage rail element. The assembly has two major connecting components. Upper and lower bent plate channels and upper and lower channel splice plates. The channels and plates have side walls which extend laterally to one another when the two rail elements are mated. The channels and plates are fastened together to provide moment strength to the splice within the system.

Preparation Of High-Strength Nanometer Scale Twinned Coating And Foil, Xinghang Zhang, Amit Misra, Michael Nastasi, Richard G. Hoagland

Department of Mechanical and Materials Engineering: Faculty Publications

Very high strength single phase stainless steel coating has been prepared by magnetron sputtering onto a substrate. The coating has a unique microstructure of nanometer spaced twins that are parallel to each other and to the substrate surface. For cases where the coating and substrate do not bind strongly, the coating can be peeled off to provide foil.