Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2911 - 2940 of 3535

Full-Text Articles in Nanoscience and Nanotechnology

A New Green Chemistry Method Based On Plant Extracts To Synthesize Gold Nanoparticles, Milka Odemariz Montes Castillo Jan 2010

A New Green Chemistry Method Based On Plant Extracts To Synthesize Gold Nanoparticles, Milka Odemariz Montes Castillo

Open Access Theses & Dissertations

Extraordinary chemical and physical properties exhibited by nanomaterials, as compared to their bulk counterparts, have made the area of nanotechnology a growing realm in the past three decades. It is the nanoscale size (from 1 to 100 nm) and the morphologies of nanomaterials that provide several properties and applications not possible for the same material in the bulk. Magnetic and optical properties, as well as surface reactivity are highly dependent on the size and morphology of the nanomaterial. Diverse nanomaterials are being widely used in molecular diagnostics as well as in medicine, electronic and optical devices. Among the most studied …

Go to article

Microstructure And Property Evaluation Of Lifepo4 Thin Films For Application In Microbatteries, Jose Marcos Mares Jan 2010

Microstructure And Property Evaluation Of Lifepo4 Thin Films For Application In Microbatteries, Jose Marcos Mares

Open Access Theses & Dissertations

The shortage of fossil fuels and the requirements to produce clean, environmental friendly, efficient, and economical energy are the principal problems in the context of energy technology for current and future generations. Therefore, advanced energy storage and conversion capabilities with higher capacity and efficiency are desired. Currently, there is an enormous interest in the development of high energy density rechargeable batteries for use in domestic applications, automotive industries and portable electronic applications. The present research focuses on the development of LiFePO4 thin films for solid-state thin-film microbatteries. The present effort was performed with a specific purpose of understanding the effect …

Go to article

Three Dimensional Collagen Gels As A Cell Culture Matrix For The Study Of Live Cells By Raman Spectroscopy, Franck Bonnier, Aidan Meade, S. Merzha, Peter Knief, Kunal Bhattacharya, Fiona Lyng, Hugh Byrne Jan 2010

Three Dimensional Collagen Gels As A Cell Culture Matrix For The Study Of Live Cells By Raman Spectroscopy, Franck Bonnier, Aidan Meade, S. Merzha, Peter Knief, Kunal Bhattacharya, Fiona Lyng, Hugh Byrne

Articles

Three dimensional collagen gels are evaluated as matrices for the study of live cells by Raman spectroscopy. The study is conducted on a human lung adenocarcinoma (A549) and a spontaneously immortalized human epithelial keratinocyte (HaCaT) cell line. It is demonstrated, using the Alamar Blue assay, that both cell models exhibit enhanced viability in collagen matrices compared to quartz substrates, commonly used for Raman spectroscopy. Using principal component analysis, it is shown that the Raman spectral analysis of cells in collagen matrices are minimally contaminated by substrate contributions and the cell to cell spectral variations are greatly reduced compared to those …

Go to article

On The Effect Of Hydrodynamic Slip On The Polarization Of A Nonconducting Spherical Particle In An Alternating Electric Field, Hui Zhao Jan 2010

On The Effect Of Hydrodynamic Slip On The Polarization Of A Nonconducting Spherical Particle In An Alternating Electric Field, Hui Zhao

Mechanical Engineering Faculty Research

The polarization of a charged, dielectric, spherical particle with a hydrodynamically slipping surface under the influence of a uniform alternating electric field is studied by solving the standard model (the Poisson–Nernst–Planck equations). The dipole moment characterizing the strength of the polarization is computed as a function of the double layer thickness, the electric field frequency, the particle’s surface charge, and the slip length. Our studies reveal that two processes contribute to the dipole moment: ion transport inside the double layer driven by the electric field and the particle’s electrophoretic motion. The hydrodynamic slip will simultaneously impact both processes. In the …

Go to article

Giant Raman Enhancement On Nanoporous Gold Film By Conjugating With Nanoparticles For Single-Molecule Detection, Lihua Qian, Biswajit Das, Yan Li, Zhilin Yang Jan 2010

Giant Raman Enhancement On Nanoporous Gold Film By Conjugating With Nanoparticles For Single-Molecule Detection, Lihua Qian, Biswajit Das, Yan Li, Zhilin Yang

Electrical & Computer Engineering Faculty Research

Hot spots have the contradictively geometrical requirements for both the narrowest interstices to provide strong near-field coupling, and sufficient space to allow entrance of the analytes. Herein, a two-step method is employed to create hot spots within hybrid nanostructures, which consist of self-supported nanoporous gold films with the absorbed probes and subsequent nanoparticle conjugates without surface agents or mechanical motion. The molecules confined into 1 nm interstice exhibit 2.9 × 107 times enhancement in Raman scattering compared to pure nanoporous gold. Giant enhancement primarily results from strong near-field coupling between nanopore and nanoparticle, which is theoretically confirmed by finite-difference …

Go to article

Selective Solubilisation Of Single Walled Carbon Nanotubes Using Polycyclic Aromatic Hydrocarbons, Sourabhi Debnath Jan 2010

Selective Solubilisation Of Single Walled Carbon Nanotubes Using Polycyclic Aromatic Hydrocarbons, Sourabhi Debnath

Doctoral

Single-walled carbon nanotubes (SWCNTS) are proposed to be one of the most promising nanomaterials, with unique electronic and mechanical properties which lend themselves to a variety of applications. In all cases the quality of the SWCNT material is important, and for some applications it is paramount. Despite sustained efforts, all currently known SWCNT synthetic techniques generate significant quantities of impurities. They also grow in bundles or ropes and are largely insoluble in common organic solvents. SWCNTS can have a range of structures and their electronic properties (metallic or semiconducting) depend on their structure and as well on their diameters. Currently …

Go to article

Resonant Mie Scattering (Rmies) Correction Of Infrared Spectra From Highly Scattering Biological Samples Analyst, Paul Bassan, Achim Kohler, Harald Martens, Joe Lee, Hugh Byrne, Paul Dumas, Ehsan Gazi, Michael Brown, Noel Clarke, Peter Gardner Jan 2010

Resonant Mie Scattering (Rmies) Correction Of Infrared Spectra From Highly Scattering Biological Samples Analyst, Paul Bassan, Achim Kohler, Harald Martens, Joe Lee, Hugh Byrne, Paul Dumas, Ehsan Gazi, Michael Brown, Noel Clarke, Peter Gardner

Articles

Infrared spectra of single biological cells often exhibit the “dispersion artefact” observed as a sharp decrease in intensity on the high wavenumber side of absorption bands, in particular the Amide I band at ~1655 cm-1, causing a downward shift of the true peak position. The presence of this effect makes any biochemical interpretation of the spectra unreliable. Recent theory has shed light on the origins of the ‘dispersion artefact’ which has been attributed to resonant Mie scattering (RMieS). In this paper a preliminary algorithm for correcting RMieS is presented and evaluated using simulated data. Results show that the ‘dispersion artefact’ …

Go to article

A Comparative Study Of The Interaction Of Different Polycyclic Aromatic Hydrocarbons On Different Types Of Single Walled Carbon Nanotubes, Sourabhi Debnath, Qiaohun Cheng, Theresa Hedderman, Hugh Byrne Jan 2010

A Comparative Study Of The Interaction Of Different Polycyclic Aromatic Hydrocarbons On Different Types Of Single Walled Carbon Nanotubes, Sourabhi Debnath, Qiaohun Cheng, Theresa Hedderman, Hugh Byrne

Articles

A comparative study of the solubilising effect of polycyclic aromatic hydrocarbon (PAHs) on single walled carbon nanotubes (SWCNTs) produced by high pressure decomposition of carbon monoxide (HiPco) and the arc discharge (AD) method has been carried out with the aid of fluorescence and Raman spectroscopy. For this study, polyphenyl and polyacene PAHs of different lengths are used. From the study it has been found that the binding energy of PAHs with AD SWCNTs is the same as that with HiPco SWCNTs. Shorter PAHs molecules better solubilise SWCNTs and in general smaller diameter SWCNTs. Thus, given their smaller diameter profile, significantly …

Go to article

An Investigation Of The Rwpe Prostate Derived Family Of Cell Lines Using Ftir Spectroscopy, M. Baker, Colin Clarke, D. Demoulin, J. Nicolson, Fiona Lyng, Hugh Byrne, C. Hart, M. Brown, N. Clarke, P. Gardner Jan 2010

An Investigation Of The Rwpe Prostate Derived Family Of Cell Lines Using Ftir Spectroscopy, M. Baker, Colin Clarke, D. Demoulin, J. Nicolson, Fiona Lyng, Hugh Byrne, C. Hart, M. Brown, N. Clarke, P. Gardner

Articles

Interest in developing robust, quicker and easier diagnostic tests for cancer has lead to an increased use of Fourier transform infrared (FTIR) spectroscopy to meet that need. In this study we present the use of different experimental modes of infrared spectroscopy to investigate the RWPE human prostate epithelial cell line family which are derived from the same source but differ in their mode of transformation and their mode of invasive phenotype. Importantly, analysis of the infrared spectra obtained using different experimental modes of infrared spectroscopy produce similar results. The RWPE family of cell lines can be separated into groups based …

Go to article

Ultrasound-Assisted Swnts Dispersion: Effects Of Sonication Parameters And Solvent Properties, Qiaohuan Cheng, Sourabhi Debnath, Elizabeth Gregan, Hugh Byrne Jan 2010

Ultrasound-Assisted Swnts Dispersion: Effects Of Sonication Parameters And Solvent Properties, Qiaohuan Cheng, Sourabhi Debnath, Elizabeth Gregan, Hugh Byrne

Articles

Ultrasonication is widely used for preparing Single-Walled Carbon Nanotube (SWNT) dispersions in different solvent media and it has been shown to play a critical role in dispersing and debundling SWNTs. The strong shear force that can exfoliate the SWNT bundles during sonication comes from cavitation, which entails a process of bubble formation, growth, and collapse. The efficiency of the cavitation process is closely correlated to many solvent parameters, including vapor pressure, viscosity, and surface tension, as well as the sonication frequency, intensity, and time. In this study, SWNTs were dispersed in a range of organic solvents assisted by tip sonication. …

Go to article

Method Of Transferring Strained Semiconductor Structure, Michael Nastasi Dec 2009

Method Of Transferring Strained Semiconductor Structure, Michael Nastasi

Department of Mechanical and Materials Engineering: Faculty Publications

The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having surface contaminants. An interface that includes the contaminants if formed in between the deposited layer and the substrate. Hydrogen atoms are introduced into the structure and allowed to diffuse to the interface. Afterward, the deposited multilayer structure is bonded to a second substrate and is separated away at the interface, which results in transferring a multilayer structure from one substrate at least one strained semiconductor layer and at least one strain-induced seed layer. The strain-induced seed layer can be …

Go to article

Thermal Conduction In Molecular Materials Using Coarse Grain Dynamics: Role Of Mass Diffusion And Quantum Corrections For Molecular Dynamics Simulations, Ya Zhou, Alejandro Strachan Dec 2009

Thermal Conduction In Molecular Materials Using Coarse Grain Dynamics: Role Of Mass Diffusion And Quantum Corrections For Molecular Dynamics Simulations, Ya Zhou, Alejandro Strachan

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

We use a mesodynamical method, denoted dynamics with implicit degrees of freedom DID, to characterize thermal transport in a model molecular crystal below and above its melting temperature. DID represents groups of atoms molecules in this case using mesoparticles and the thermal role of the intramolecular degrees of freedom DoFs are described implicitly using their specific heat. We focus on the role of these intramolecular DoFs on thermal transport. We find that thermal conductivity is independent of intramolecular specific heat for solid samples and a linear relationship between the two quantities in liquid samples with the coefficient of proportionality being …

Go to article

Controlled Synthesis Of High Quality Carbon Nanotubes And Their Applications In Transparent Conductive Films, Enkeleda Dervishi Dec 2009

Controlled Synthesis Of High Quality Carbon Nanotubes And Their Applications In Transparent Conductive Films, Enkeleda Dervishi

Theses and Dissertations

Carbon nanotubes (CNTs) have exceptional electrical, mechanical and electronic properties which make them attractive for numerous applications. Catalytic chemical vapor deposition (cCVD) is one of the most promising methods for large-scale production of high-quality CNTs at a relatively low cost. Synthesis conditions such as catalyst composition, reaction temperature, hydrocarbon type and flow rate, have an enormous influence on the morphological properties of nanotubes. This research presents a thorough study of the parametric conditions affecting the growth properties of single-wall and multi-wall carbon nanotubes. High quality single-wall carbon nanotubes (SWCNTs) were synthesized on different catalytic systems, using the inductive radio frequency …

Go to article

Fabrication Methods For Creating Flexible Polymer Substrate Sensor Tags, Jack L. Skinner, Harvey Ho Dec 2009

Fabrication Methods For Creating Flexible Polymer Substrate Sensor Tags, Jack L. Skinner, Harvey Ho

Mechanical Engineering

The authors describe the design, fabrication, and testing of a passive wireless sensor platform utilizing low-cost commercial surface acoustic wave filters and sensors. Polyimide and polyethylene terephthalate sheets are used as substrates to create a flexible sensor tag that can be applied to curved surfaces. A microfabricated antenna is integrated on the substrate in order to create a compact form factor. The sensor tags are fabricated using 315 MHz surface acoustic wave filters and photodiodes and tested with the aid of a fiber-coupled tungsten lamp. Microwave energy transmitted from a network analyzer is used to interrogate the sensor tag. Due …

Go to article

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner Dec 2009

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

A mathematical model for the evolution of pulsed laser-irradiated, molten metallic films has been developed using the lubrication theory. The heat transfer problem that incorporates the absorbed heat from a single laser beam or the interfering laser beams is solved analytically. Using this temperature field, we derive the 3D long-wave evolution PDE for the film height. To get insights into dynamics of dewetting, we study the 2D version of the evolution equation by means of a linear stability analysis and by numerical simulations. The stabilizing and destabilizing effects of various system parameters, such as the reflectivity, the peak laser beam …

Go to article

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner Dec 2009

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

A mathematical model for the evolution of pulsed laser-irradiated, molten metallic films has been developed using the lubrication theory. The heat transfer problem that incorporates the absorbed heat from a single laser beam or the interfering laser beams is solved analytically. Using this temperature field, we derive the 3D long-wave evolution PDE for the film height. To get insights into dynamics of dewetting, we study the 2D version of the evolution equation by means of a linear stability analysis and by numerical simulations. The stabilizing and destabilizing effects of various system parameters, such as the reflectivity, the peak laser beam …

Go to article

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner Dec 2009

Thermocapillary Effects In Driven Dewetting And Self-Assembly Of Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

A mathematical model for the evolution of pulsed laser-irradiated, molten metallic films has been developed using the lubrication theory. The heat transfer problem that incorporates the absorbed heat from a single laser beam or the interfering laser beams is solved analytically. Using this temperature field, we derive the 3D long-wave evolution PDE for the film height. To get insights into dynamics of dewetting, we study the 2D version of the evolution equation by means of a linear stability analysis and by numerical simulations. The stabilizing and destabilizing effects of various system parameters, such as the reflectivity, the peak laser beam …

Go to article

Stochastic Analysis Of Electrostatic Mems Subjected To Parameter Variations, Nitin Agarwal, Narayana R. Aluru Dec 2009

Stochastic Analysis Of Electrostatic Mems Subjected To Parameter Variations, Nitin Agarwal, Narayana R. Aluru

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

This paper presents an efficient stochastic framework for quantifying the effect of stochastic variations in various design parameters such as material properties, geometrical features, and/or operating conditions on the performance of electrostatic microelectromechanical systems (MEMS) devices. The stochastic framework treats uncertainty as a separate dimension, in addition to space and time, and seeks to approximate the stochastic dependent variables using sparse grid interpolation in the multidimensional random space. This approach can be effectively used to compute important information, such as moments (mean and variance), failure probabilities, and sensitivities with respect to design variables, regarding relevant quantities of interest. The approach …

Go to article

Frequency-Domain Simulations Of A Negative-Index Material With Embedded Gain, Yonatan Sivan, Shumin Xiao, Uday K. Chettiar, Alexander V. Kildishev, V. M. Shalaev Dec 2009

Frequency-Domain Simulations Of A Negative-Index Material With Embedded Gain, Yonatan Sivan, Shumin Xiao, Uday K. Chettiar, Alexander V. Kildishev, V. M. Shalaev

Birck and NCN Publications

We solve the equations governing light propagation in a negative-index material with embedded nonlinearly saturable gain material using a frequency-domain model. We show that available gain materials can lead to complete loss compensation only if they are located in the regions where the field enhancement is maximal. We study the increased enhancement of the fields in the gain composite as well as in the metal inclusions and show analytically that the effective gain is determined by the average near-field enhancement.

Go to article

Synthesis And Spectroscopic Characterization Of Nanostructured Thermoelectric Materials, Jason Reppert Dec 2009

Synthesis And Spectroscopic Characterization Of Nanostructured Thermoelectric Materials, Jason Reppert

All Dissertations

Bismuth in the bulk form is a semimetal with a rhombohedral structure. It has a small band overlap between the conduction and valence bands and a highly anisotropic electron effective-mass tensor. Thermoelectric materials, in which one of the three dimensions is in the nanometer regime, exhibit unique quantum confinement properties and have generated much interest in recent years. Theoretical investigations have suggested that nanowires with diameters ≤ 10 nm will possess a figure-of-merit ZT > 2. Prior to this study, it has been shown that Bi nanowires with small enough diameters (~10 nm), prepared via the pulsed laser vaporization method, undergo …

Go to article

Inter-Tube Bonding And Defects In Carbon Nanotubes And The Impact On The Transport Properties And Micro-Morphology, Keqin Yang Dec 2009

Inter-Tube Bonding And Defects In Carbon Nanotubes And The Impact On The Transport Properties And Micro-Morphology, Keqin Yang

All Dissertations

The transport properties of the carbon nanotubes (CNTs) are affected by the tube-tube interaction and the defects presented in the system. Inter-tube bonding, formed during spark plasma sintering (SPS) process, lowers the electrical/thermal resistivity at the tube-tube junctions and also causes new scattering mechanisms such as strong electron-phonon coupling (EPC) at low temperature. More evidences have been found by changing the SPS temperature and doping the CNTs to support the electron-phonon coupling is Kohn anomaly (KA) in as-SPSed CNTs. The phonon drag, appearing in thermoelectric power (TEP) of the as-SPSed CNTs at low temperature, can be explained in the framework …

Go to article

Progresses In Electrocatalysis Of Nanomaterials—Tuning The Surface Structure And Property Of Electrocatalysts, Yan-Xia Jiang, Na Tian, Zhi-You Zhou, Sheng-Pei Chen, Shi-Gang Sun Nov 2009

Progresses In Electrocatalysis Of Nanomaterials—Tuning The Surface Structure And Property Of Electrocatalysts, Yan-Xia Jiang, Na Tian, Zhi-You Zhou, Sheng-Pei Chen, Shi-Gang Sun

Journal of Electrochemistry

The property of an electrocatalyst depends strongly on its surface structure.The study of surface structure-catalytic functionality is the base of design and preparation of electrocatalysts of high activity,high stability and high selectivity at microstructure level.In this paper,based mainly on our results concering hydrogen and oxygen adsorption-desorption,ethylene glycol oxidation and CO2 reduction,the research progresses in tuning the surface structure and property of electrocatalysts are summarized.This paper overviews firstly the cyclic voltammetric characteristics,electrocatalytic properties of platinum single crystal planes lying on different crystallographic zones of the unit stereographic triangle of face-centered cubic(fcc) metals.Next,the innovation of electrochemical methods to control the surface …

Go to article

Synthesis And Electrocatalytic Properties Of Ni-Pd/C Catalysts With Pd-Enriched Surface, Yu-Mei Chen, Zhi-Xiu Liang, Sheng-Li Chen Nov 2009

Synthesis And Electrocatalytic Properties Of Ni-Pd/C Catalysts With Pd-Enriched Surface, Yu-Mei Chen, Zhi-Xiu Liang, Sheng-Li Chen

Journal of Electrochemistry

The Ni-Pd alloy catalysts with Pd-enriched surface were synthesized through a modified polyol process.The synthesized materials were investigated by XRD and electrochemical methods,and tested as electrocatalysts for CH3OH-tolerant oxygen reduction.The results indicated that the synthesized Ni-Pd nanoparticles possess multiple phases containing Pd-Ni alloy and pure Ni.Comparing with Pd/C,the prepared Ni-Pd/C nanoparticles exhibited better resolved voltammetric peaks between the hydrogen absorption and adsorption,and positively shifted current peaks for the reduction of Pd oxide.The prepared Ni-Pd alloys with Pd-enriched surface have significantly enhanced ORR activity and improved CH3OH tolerance as comparing with Pd/C catalysts.

Go to article

Complex Reduction Preparation Of Carbon Supported Pd Nanoparticle Catalyst And Its Electrocatalysis For Formic Acid Oxidation, Wei He, Yong-Yin Kang, Chong Du, Zhi-Qing Zou, Xiao-Gang Zhang, Hui Yang Nov 2009

Complex Reduction Preparation Of Carbon Supported Pd Nanoparticle Catalyst And Its Electrocatalysis For Formic Acid Oxidation, Wei He, Yong-Yin Kang, Chong Du, Zhi-Qing Zou, Xiao-Gang Zhang, Hui Yang

Journal of Electrochemistry

A simple procedure involved the complexing of PdCl2 with sodium citrate followed by ethylene glycol reduction has been employed for the preparation of carbon-supported Pd nanoparticles(Pd/C).The XRD and TEM characterizations indicate that Pd nanoparticles with a small particle size were well-dispersed on carbon support.The mean particle sizes of the Pd/C catalysts were found to be increased from 2.7 to 5.8 nm with heat-treatments at different temperature.The mass activity of the Pd/C catalyst for formic acid electrooxidation increased with the decrease in Pd particle size.However,the specific activity increased with Pd particle size.Furthermore,the Pd/C catalyst with a particle size of ca.3.6 …

Go to article

Cyclic Voltammetric And In-Situ Ftir Spectroscopic Studies Of Adsorption And Reduction Of No On Electrode Of Pt Nanoparticles, Qian Cheng, Yan-Xia Jiang, Dong-Mei Zeng, Shi-Gang Sun Nov 2009

Cyclic Voltammetric And In-Situ Ftir Spectroscopic Studies Of Adsorption And Reduction Of No On Electrode Of Pt Nanoparticles, Qian Cheng, Yan-Xia Jiang, Dong-Mei Zeng, Shi-Gang Sun

Journal of Electrochemistry

Adsorption and reduction of NO on electrode of Pt nanoparticles in acid solutions were studied by means of cyclic voltammetry(CV) and in-situ FTIR spectroscopy.The results indicated that the reduction of NO is a complicated process including the adsorption of NO on electrode surface.Two types of surface-bonded NO were determined on Pt nanoparticles.The weakly adsorbed NO was reduced between 0.6 V and-0.05 V,which yielded nitrous oxide(N2O) and ammonium(NH4+) as products;while the strongly bonded NO was reduced at more negative potentials between-0.05V and-0.15V,producing only NH4+ species.

Go to article

Preparation Of Pt Nanoflower/Zno Composites Arrays And Their Electrocatalysis For Methanol Oxidation, Li Gao, Yi-Feng E, Lou-Zhen Fan Nov 2009

Preparation Of Pt Nanoflower/Zno Composites Arrays And Their Electrocatalysis For Methanol Oxidation, Li Gao, Yi-Feng E, Lou-Zhen Fan

Journal of Electrochemistry

The Pt nanoflower/ZnO(PtNF/ZnO) nanorod composites arrays were electrochemically prepared by controlling the hydrophobicity and the hydrophilicity of ZnO nanorods arrays.The Pt nanoflowers grew on the tip of ZnO nanorods,which maintain the vertical array of Zno nanorods with a high degree of size uniformity and high surface area.Compared with Pt nanoparticle covered ZnO nanorod arrays,which were prepared by controlling the hydrophilicities of ZnO nanorods and Pt nanoparticles,the PtNF/ZnO displayed highest electrocatalytic activities for the oxidation of methanol.

Go to article

Enhanced Visible Light Photoelectrochemical Performances With Nitrogen Doped Tio2 Nanowire Arrays, Xiao-Jun Lv, Yue-Ming Li, Hao Zhang, Da Chen, Jennifer Hensel, Jin Z Zhang, Jing-Hong Li Nov 2009

Enhanced Visible Light Photoelectrochemical Performances With Nitrogen Doped Tio2 Nanowire Arrays, Xiao-Jun Lv, Yue-Ming Li, Hao Zhang, Da Chen, Jennifer Hensel, Jin Z Zhang, Jing-Hong Li

Journal of Electrochemistry

Self-organized anodic anatase TiO2 nanowire arrays doped with nitrogen have been successfully fabri-cated and their photoelectrochemical(PEC) properties have been characterized and found to be substantially im-proved compared to undoped nanowires or commercial P25 nanoparticles.Photocurrent measured with monochro-matic incident light showed that the incident photon-to-current efficiency(IPCE,%) values of nanowire arrayelectrodes with or without N-doping were obviously higher than that of commercial P25 nanoparticle electrodes,and nitrogen-doped TiO2 nanowire arrays(NTNA) had noticeable absorption in the visible region.The NTNAelectrodes showed the highest photocurrent density and power conversion efficiency under 100 mW/cm2 visiblelight illumination.A maximumolphotoconversion efficiency of 0.52% was achieved for the …

Go to article

Entropy Considerations In Numerical Simulations Of Non-Equilibrium Rarefied Flows, Sruti Chigullapalli, A. Venkattraman, M. S. Ivanov, Alina A. Alexeenko Nov 2009

Entropy Considerations In Numerical Simulations Of Non-Equilibrium Rarefied Flows, Sruti Chigullapalli, A. Venkattraman, M. S. Ivanov, Alina A. Alexeenko

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

Non-equilibrium rarefied flows are encountered frequently in supersonic flight at high altitudes, vacuum technology and in microscale devices. Prediction of the onset of non-equilibrium is important for accurate numerical simulation of such flows. We formulate and apply the discrete version of Boltzmann’s H-theorem for analysis of non-equilibrium onset and accuracy of numerical modeling of rarefied gas flows. The numerical modeling approach is based on the deterministic solution of kinetic model equations. The numerical solution approach comprises the discrete velocity method in the velocity space and the finite volume method in the physical space with different numerical flux schemes: the first-order, …

Go to article

Manifestation Of Kohn Anomaly In 1/F Fluctuations In Metallic Carbon Nanotubes, Ju Hee Back, Cheng-Lin Tsai, Sunkook Kim, Saeed Mohammadi, Moonsub Shim Nov 2009

Manifestation Of Kohn Anomaly In 1/F Fluctuations In Metallic Carbon Nanotubes, Ju Hee Back, Cheng-Lin Tsai, Sunkook Kim, Saeed Mohammadi, Moonsub Shim

Birck and NCN Publications

Low-frequency noise in metallic single walled carbon nanotubes is shown to be strongly dependent on the Fermi level position and the applied electric field across the nanotube. Resonance-like enhancement observed near optical phonon energy only when the Fermi level lies near the Dirac point is correlated to Raman G-band softening and broadening. The results suggest that the competition between zone-center and zone-boundary phonon scattering is the underlying origin of the large enhancement and resonance-like behavior of 1/f noise.

Go to article

Imprinting Polymerfilm On Patterned Substrate, Li Tan, Yen-Peng Kong, Stella W. Pang, Albert F. Yee Nov 2009

Imprinting Polymerfilm On Patterned Substrate, Li Tan, Yen-Peng Kong, Stella W. Pang, Albert F. Yee

Department of Mechanical and Materials Engineering: Faculty Publications

A method of applying a pattern on a topography includes first applying a polymer film to an elastormer member, such as PDMS, to form a pad. The pad is then applied to a substrate having a varying topography under pressure. The polymer film is transferred to the substrate due to the plastic deformation of the polymer film under pressure compared to the elastic deformation of the PDMS member pulls away from the polymer layer, thereby depositing the polymer layer, thereby depositing the polymer layer upon the substrate.

Go to article

First Prev Next Last