Nanoscience and Nanotechnology Commons^™

Optical Patterning Of Trapped Charge In Nitrogen-Doped Diamond, Harishankar Jayakumar, Jacob Henshaw, Siddharth Dhomkar, Daniela Pagliero, Abdelghani Laraoui, Neil B. Manson, Remus Albu, Marcus W. Doherty, Carlos A. Meriles

Department of Mechanical and Materials Engineering: Faculty Publications

The nitrogen-vacancy (NV) centre in diamond is emerging as a promising platform for solid-state quantum information processing and nanoscale metrology. Of interest in these applications is the manipulation of the NV charge, which can be attained by optical excitation. Here, we use two-colour optical microscopy to investigate the dynamics of NV photo-ionization, charge diffusion and trapping in type-1b diamond. We combine fixed-point laser excitation and scanning fluorescence imaging to locally alter the concentration of negatively charged NVs, and to subsequently probe the corresponding redistribution of charge. We uncover the formation of spatial patterns of trapped charge, which we qualitatively reproduce …

Activation Effect Of Nano-Carbon Derived From Co2 On Lead Electrode In Sulfuric Aqueous Solution, Yu-Qiao Song, Hua Zhu, Guang-Jin Zhao, Wen-Long Wu, Shou-Bin Zhou, Di-Hua Wang

Journal of Electrochemistry

Serious sulfation of the negative plate is one of the most popular reasons of the early failure of lead-acid battery. Addition of nano-carbon was proved to be effective for recovering the sulfated electrode and the property of the carbon material always plays an important role. In this work, a new kind of nano-carbon material with high electrical conductivity and good adsorption capability for heavy metal cations, which is electrochemically prepared from CO₂ in molten carbonates, was tested as activation additive for the sulfated lead electrode by cyclic voltammetry and SEM measurements. The results showed that the as-prepared carbon can …

WoX/Pedot:Pss Double-Layered Hole-Transport Layers For Efficient And Stable Planar Heterojunction Perovskite Solar Cells, Wen-Yuan Qiao, Qiang Guo, Cong Li, Shuang Ma, Fu-Zhi Wang, Song-Yuan Dai, Zhan-Ao Tan

Journal of Electrochemistry

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a commonly used hole-transport material in the perovskite solar cells (PerSCs) structure of perovskite/fullerene planer heterojunction, but it also has a negative effect on the stability of device because of its acidity which will corrode metal oxide transparent electrodes. In this work, a WO_x hole-transport layer with high work function was inserted into the PEDOT: PSS and FTO to enhance the stability and photovoltaic performance. The inserted WO_x layer not only can avoid direct contact between PEDOT:PSS and FTO, but also can further reduce the contact barrier between the electrode interface. We studied the effect …

Preparations And Photoelectrochemical Properties Of Phosphate Modified Rgo-Biobr Nanocomposites, Shuang-Ying Chen, Zhi-Jun Li, Xu-Liang Zhang, Kang Hu, Rui Yan, Li-Qiang Jing

Journal of Electrochemistry

The RGO-BiOBr nanocomposites have been successfully synthesized by a hydrothermal process, and then modified with phosphorous acids. The photoelectrochemical properties of the fabricated RGO-BiOBr nanocomposite films were studied. The results indicate that the photocurrent densities of RGO-BiOBr were much larger compared with those of the bare BiOBr, and interestingly, the photocurrent densities were further improved after phosphate modification. Based on the analyses of the produced hydroxyl radical amounts, the enhanced photocurrent densities could be attributed to the introduction of RGO and to the formed negative fields of modified phosphate groups, which are favorable for electrons to be transferred and for …

Development And Evaluation Of A Near-Infrared (1047 Nm) Photoacoustic-Nephelometer Spectrometer For Detection And Optical Characterization Of Black Carbon Aerosol, Yang Yu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Black carbon (BC) aerosol are aggregates of small carbon spherules of <10 nm to approximately 50 nm in diameter. They are characterized by their strong visible light absorption property with a mass absorption cross-section (MAC) value above 5 m² g ⁻¹ at a wavelength λ = 550 nm, which increases inversely with wavelengths from near-infrared (≈1 µm) to ultraviolet with a power law of one. The absorbing nature of BC aerosol has been implicated in regional atmospheric warming, changing of monsoon patterns, and accelerated melting of the glaciers. The BC radiative effects over earth is currently estimated within a factor of four, resulting in one of the largest uncertainties in climate modeling. This uncertainty results from our inadequate knowledge about regional BC emission rates, and associated aerosol …

Generalizing The Quantum Dot Lab Towards Arbitrary Shapes And Compositions, Matthew A. Bliss, Prasad Sarangapani, James Fonseca, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

As applications in nanotechnology reach the scale of countable atoms, computer simulation has become a necessity in the understanding of new devices, such as quantum dots. To understand the various optoelectronic properties of these nanoparticles, the Quantum Dot Lab (QDL) has been created and powered by NEMO5 to simulate on multi-scale, multi-physics bases. QDL is easy to use by offering choices of different QD geometries such as shapes and sizes to the users from a predefined menu. The simplicity of use, however, limits the simulation of general QD shapes and compositions. A method to import generic strained crystalline and amorphous …

Modeling Of A Roll-To-Roll Plasma Cvd System For Graphene, Yudong Chen, Majed A. Alrefae, Anurag Kumar, Timothy S. Fisher

The Summer Undergraduate Research Fellowship (SURF) Symposium

Graphene is a 2D carbon material that has extraordinary physical properties relevant to many industrial applications such as electronics, oxidation barrier and biosensors. Roll-to-roll plasma chemical vapor deposition (CVD) has been developed to manufacture graphene at large scale. In a plasma CVD chamber, graphene is grown on a copper foil as it passes through a high-temperature plasma region. The temperatures of the gas and the copper foil play important roles in the growth of graphene. Consequently, there is a need to understand the temperature and gas velocity distributions in the system. The heat generated in the plasma creates a thermal …

Development Of Micro-/Nano-Architectures For Intracellular Sensing Platform, Ryan M. Preston, Dae Seung Wie, Chi Hwan Lee

The Summer Undergraduate Research Fellowship (SURF) Symposium

Currently available nanotechnologies are capable of creating various nanostructures in controlled dimensions such as particles (0D), wires (1D), membranes (2D), and cubes (3D) by exploiting “top-down” or “bottom-up” methods. However, there exist limitations to systematically construct hierarchical nanostructures with geometric complexities. This study is focused on developing a novel nanofabrication strategy that can rationally produce a set of hierarchical nanostructures configured with precisely engineered facets, tip shapes, and tectonic motifs. We aim to identify a collection of optimal materials, array layouts, basic components, and nanofabrication techniques for the production of hierarchical nanostructures by exploiting device-grade semiconducting silicon materials. To accomplish …

Temperature Dependent Surface Modification Of Tungsten Exposed To High-Flux Low-Energy Helium Ion Irradiation, Antony Q. Damico, Jitendra K. Tripathi, Theodore J. Novakowski, Gennady Miloshevsky, Ahmed Hassanein

The Summer Undergraduate Research Fellowship (SURF) Symposium

Nuclear fusion is a great potential energy source that can provide a relatively safe and clean limitless supply of energy using hydrogen isotopes as fuel material. ITER (international thermonuclear experimental reactor) is the world first fusion reactor currently being built in France. Tungsten (W) is a prime candidate material as plasma facing component (PFC) due to its excellent mechanical properties, high melting point, and low erosion rate. However, W undergoes a severe surface morphology change when exposed to helium ion (He⁺) bombardment under fusion conditions. It forms nanoscopic fiber-form structures, i.e., fuzz on the surface. Fuzz is brittle …

Quantum Dot Lab : Incorporation Of Alloys In The Capping Layer Of Multi-Layer Quantum Dot, Unmesha U. Kale, Prasad Sarangapani, Jim Fonseca, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

Quantum dots have enhanced the performance of several optoelectronic devices. Designing and obtaining optimal quantum dot structures requires intensive simulation. Quantum Dot Lab on nanoHUB provides such a simulation platform. The simulation is fully parallelized and depending on the structure, the tool decides the computational resource which is to be used for the simulation. To obtain accurate predictions of quantum dot structures it is essential to provide a variety of simulation parameters to the user. In this research, a user interface was created where the user can simulate alloys by Random distribution and by Virtual Crystal Approximation(VCA) type distribution in …

Energy Transfer In Cdse Nanoplatelet Superlattices, Kelly Wang, Jordan Snaider, Libai Huang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Two-dimension CdSe semiconductor nanoplatelets (NPLs) exhibit unique, highly desirable optical and electronic properties, such as large absorption crossection and bright emission. Fӧrster resonance energy transfer (FRET) between NPLs is responsible for the utility of these NPLs in fields such as lasing, lighting, solar energy, and sensing. Here we study energy transfer processes in NPL superlattices using photoluminescence (PL) and time resolved PL (TRPL) spectroscopic methods. Information on the effect of thickness of NPL is obtained through correlating PL and TRPL spectra of CdSe superlattices with AFM measurements. PL spectrum showed narrow fluorescence and absorption peaks at room temperature corresponding to …

Performance Of Tf-Vls Grown Inp Photovoltaic Cells, Junyan Shi, Yubo Sun, Peter Bermel

The Summer Undergraduate Research Fellowship (SURF) Symposium

A grand challenge of photovoltaics (PV) is to find materials offering a promising combination of low costs and high efficiencies. While III-V material-based PV cells have set many world records, often their cost is much greater than other commercial cells. To help address this gap, thin-film vapor-liquid-solid (TF-VLS) grown Indium Phosphide (InP) PV cells have recently been developed, which both eliminate a key source of high costs and offer a direct bandgap of 1.34eV with potential to approach maximum theoretical efficiencies. However, the unanticipated phenomenon of open circuit voltage (V_oc) degradation has prevented TF-VLS grown InP PV cells …

Effect Of Particle Concentration And Ac Electric Field Strength On Particle Trapping In Rapid Electrokinetic Patterning (Rep), Sixuan Li, Avanish Mishra, Steve Wereley

The Summer Undergraduate Research Fellowship (SURF) Symposium

Rapid Electrokinetic Patterning (REP) is an optoelectric technique for trapping and translating micro- and nanoparticles non-invasively. It uses a combination of laser-induced AC electrothermal flow and particle-electrode interactions in the presence of a uniform AC electric field. The trapping is governed by laser power, electric field strength, AC frequency and dielectric properties of the particle and the medium. A REP trap has an AC frequency, termed critical frequency, above which particles cannot be trapped. It is expected to be dependent on dielectric properties of the particle and the medium. However, we propose that the particle concentration and AC field strength …

Dislocation Engineering In Novel Nanowire Structures, Christopher Y. Chow, Samuel T. Reeve, Alejandro Strachan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Leveraging defects is a cornerstone of materials science, and has become increasingly important from bulk to nanostructured materials. We use molecular dynamics simulations to explore the limits of defect engineering by harnessing individual dislocations in nanoscale metallic specimens and utilizing their intrinsic behavior for application in mechanical dampening. We study arrow-shaped, single crystal copper nanowires designed to trap and control the dynamics of dislocations under uniaxial loading. We characterize how nanowire cross-section and stacking-fault energy of the material affects the ability to trap partial or full dislocations. Cyclic loading simulations show that the periodic motion of the dislocations leads to …

Fluence Dependent Surface Modification On Tungsten Coatings Using Low Energy Helium Ion Irradiation At Elevated Temperatures, Cheng Ji, Jitendra K. Tripathi, Theodore J. Novakowski, Valeryi Sizyuk, Ahmed Hassanein

The Summer Undergraduate Research Fellowship (SURF) Symposium

Nuclear fusion is the most promising renewable energy source for the near future. It can provide a large amount of energy using a very small amount of fuel, as compared with that of the coal, oil, or nuclear fission. The chain reaction in nuclear fusion produces the energy and fuel, from hydrogen isotopes available in see water. Tungsten (W) is a leading candidate material for the plasma-facing component (PFC) in nuclear fusion reactors such as ITER (international thermonuclear experimental reactor), because of its high melting point, high yield strength, low erosion and low hydrogen isotope retention. Recent studies showed deeply …

Assembly Of Nucleic Acid-Based Nanoparticles By Gas-Liquid Segmented Flow Microfluidics, Matthew L. Capek, Ross Verheul, David H. Thompson

The Summer Undergraduate Research Fellowship (SURF) Symposium

The development of novel and efficient mixing methods is important for optimizing the efficiency of many biological and chemical processes. Tuning the physical and performance properties of nucleic acid-based nanoparticles is one such example known to be strongly affected by mixing efficiency. The characteristics of DNA nanoparticles (such as size, polydispersity, ζ-potential, and gel shift) are important to ensure their therapeutic potency, and new methods to optimize these characteristics are of significant importance to achieve the highest efficacy. In the present study, a simple segmented flow microfluidics system has been developed to augment mixing of pDNA/bPEI nanoparticles. This DNA and …

Fast Diffusion Of Silver In Tio2 Nanotube Arrays, Wanggang Zhang, Yiming Liu, Diaoyu Zhou, Hui Wang, Wei Liang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Using magnetron sputtering and heat treatment, Ag@TiO₂ nanotubes are prepared. The effects of heat-treatment temperature and heating time on the evolution of Ag nanofilms on the surface of TiO₂ nanotubes and microstructure of Ag nanofilms are investigated by X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. Ag atoms migrate mainly on the outmost surface of the TiO₂ nanotubes, and fast diffusion of Ag atoms is observed. The diffusivity for the diffusion of Ag atoms on the outmost surface of the TiO₂ nanotubes at 400 °C is 6.87 × 10⁻¹⁸ m²/s, …

Architectures And Algorithms For Intrinsic Computation With Memristive Devices, Jens Bürger

Dissertations and Theses

Neuromorphic engineering is the research field dedicated to the study and design of brain-inspired hardware and software tools. Recent advances in emerging nanoelectronics promote the implementation of synaptic connections based on memristive devices. Their non-volatile modifiable conductance was shown to exhibit the synaptic properties often used in connecting and training neural layers. With their nanoscale size and non-volatile memory property, they promise a next step in designing more area and energy efficient neuromorphic hardware.

My research deals with the challenges of harnessing memristive device properties that go beyond the behaviors utilized for synaptic weight storage. Based on devices that exhibit …

Efficient Inelastic Scattering In Atomistic Tight Binding, James A. Charles

Open Access Theses

In this thesis, the coherent and incoherent transport simulation capabilities of the multipurpose nanodevice simulation tool NEMO5 are presented and applied on transport in tunneling field-effect transistors (TFET). A gentle introduction is given to the non-equilibrium Green's function theory. The comparison with experimental resistivity data confirms the validity of the electron-phonon scattering models. Common pitfalls of numerical implementations such as current conservation, energy mesh resolution, and recursive Green's function stability and the applicability of common approximations of scattering self-energies are discussed. The impact of phonon-assisted tunneling on the performance of TFETs is exemplified with a concrete Si nanowire device. The …

Nanophotonics For Dark Materials, Filters, And Optical Magnetism, Mengren Man

Open Access Dissertations

Research on nanophotonic structures for three application areas is described, a near perfect optical absorber based on a graphene/dielectric stack, an ultraviolet bandpass filter formed with an aluminum/dielectric stack, and structures exhibiting homogenizable magnetic properties at infrared frequencies. The graphene stack can be treated as a effective, homogenized medium that can be designed to reflect little light and absorb an astoundingly high amount per unit thickness, making it an ideal dark material and providing a new avenue for photonic devices based on two-dimensional materials. Another material stack arrangement with thin layers of metal and insulator forms a multi-cavity filter that …

Laser Direct Written Silicon Nanowires For Electronic And Sensing Applications, Woongsik Nam

Open Access Dissertations

Silicon nanowires are promising building blocks for high-performance electronics and chemical/biological sensing devices due to their ultra-small body and high surface-to-volume ratios. However, the lack of the ability to assemble and position nanowires in a highly controlled manner still remains an obstacle to fully exploiting the substantial potential of nanowires. Here we demonstrate a one-step method to synthesize intrinsic and doped silicon nanowires for device applications. Sub-diffraction limited nanowires as thin as 60 nm are synthesized using laser direct writing in combination with chemical vapor deposition, which has the advantages of in-situ doping, catalyst-free growth, and precise control of position, …

Physical Properties, Evaporation And Combustion Characteristics Of Nanofluid-Type Fuels, Saad Tanvir

Open Access Dissertations

Nanofluids are liquids with stable suspension of nanoparticles. Limited studies in the past have shown that both energetic and catalytic nanoparticles once mixed with traditional liquid fuels can be advantageous in combustion applications, e.g., increased energy density and shortened ignition delay. Contradictions in existing literature, scarcity of experimental data and lack of understanding on how the added nanoparticles affect the physical properties as well as combustion characteristics of the resulting fuel motivated us to launch a detailed experimental and theoretical investigation.

The surface tension of ethanol and n-decane based nanofluid fuels containing suspended nanoparticles were measured using the pendant drop …

Design, Fabrication And Testing Of Monolithic Low-Power Passive Sigma-Delta Analog-To-Digital Converters, Angsuman Roy

UNLV Theses, Dissertations, Professional Papers, and Capstones

Analog-to-digital converters are critically important in electronic systems. The

difficulty in meeting high performance parameters increases as integrated circuit design

process technologies advance into the deep nanometer region. Sigma-delta analog-todigital

converters are an attractive option to fulfill many data converter requirements.

These data converters offer high performance while relaxing requirements on the precision

of components within an integrated circuit. Despite this, the active integrators found within

sigma-delta analog-to-digital converters present two main challenges. These challenges are

the power consumption of the active amplifier and achieving gain-bandwidth necessary for

sigma-delta data converters in deep nanometer process technologies. Both of these

challenges …

Study Of Plasmonic Properties Of The Gold Nanorods In The Visible To Near Infrared Light Regime, Pijush Kanti Ghosh

Graduate Theses and Dissertations

Nanostructures of noble metals show unique plasmonic behavior in the visible to near-infrared light range. Gold nanostructures exhibit a particularly strong plasmonic response for these wavelengths of light. In this study we have investigated optical enhancement and absorption of gold nanorods with different thickness using finite element method simulations. This study reports on the resonance wavelength of the sharp-corner and round-corner rectangles of constant length 100 nm and width 60 nm. The result shows that resonance wavelength depends on the polarization of the incident light; there also exists a strong dependence of the optical enhancement and absorption on the thickness …

Photoluminescence Measurement On Low-Temperature Metal Modulation Epitaxy Grown Gan, Yang Wu

Graduate Theses and Dissertations

A low-temperature photoluminescence (PL) study was conducted on low-temperature metal modulation epitaxy (MME) grown GaN. By comparing the PL signal from high temperature grown GaN buffer layers, and MME grown cap layers on top of the buffer layers, it was found that MME grown GaN cap has a significantly greater defect-related emission. The band edge PL from MME grown GaN found to be 3.51eV at low temperature. The binding energy of the exciton in GaN is determined to be 21meV through temperature dependence analysis. A PL peak at 3.29eV was found in the luminescence of the MME grown cap layer, …

Contact Radius And Insulator-Metal Transition In Films Comprised Of Touching Semiconductor Nanocrystals, Deanna M. Lanigan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Nanocrystal assemblies are being explored for a number of optoelectronic applications such as transparent conductors, photovoltaic solar cells, and electrochromic windows. Majority carrier transport is important for these applications, yet it remains relatively poorly understood in films comprised of touching nanocrystals. Specifically, the underlying structural parameters expected to determine the transport mechanism have not been fully elucidated. In this report, we demonstrate experimentally that the contact radius, between touching heavily doped ZnO nanocrystals, controls the electron transport mechanism. Spherical nanocrystals are considered, which are connected by a circular area. The radius of this circular area is the contact radius. For …

Expanding The Versatility Of Nano Assembled Capsules As Platform Of Potential High Payload Mri Contrast Agents, Annah Farashishiko

Dissertations and Theses

Magnetic resonance imaging (MRI) has become a powerful clinical modality in diagnostic medicine. It is non-invasive and offers high spatial and temporal resolution. The goal of molecular imaging is to reveal the pathophysiology underlying the observed anatomy and diagnose diseases. The detection of pathological biomarkers can lead to early recognition of diseases and improved monitoring for recurrence. Clinically available contrast agents are limited in their discrimination of contrast between tissues and they tend to have very high detection limits. Because biomarkers are very low in concentration there is a need for high payload deposition of contrast agent (CA) and targeted …

Frequency Multiplication In Silicon Nanowires, Marius Mugurel Ghita

Dissertations and Theses

Frequency multiplication is an effect that arises in electronic components that exhibit a non-linear response to electromagnetic stimuli. Barriers to achieving very high frequency response from electronic devices are the device capacitance and other parasitic effects such as resistances that arise from the device geometry and are in general a function of the size of the device. In general, smaller device geometries and features lead to a faster response to electromagnetic stimuli. It was posited that the small size of the silicon nanowires (SiNWs) would lead to small device capacitance and spreading resistance, thus making the silicon nanowires useful in …

Investigation Of Carbon Nanomaterials Embedded In A Cementitious Matrix, Clarissa A. Roe

Masters Theses & Specialist Projects

The objective of this thesis was to investigate whether the addition of carbon nanofibers had an effect on the splitting tensile strength of Hydro-Stone gypsum concrete. The carbon nanofibers used were single-walled carbon nanotubes (SWNT), buckminsterfullerene (C60), and graphene oxide (GO). Evidence of the nanofibers interacting with gypsum crystals in a connective manner was identified in both 1 mm thick concrete discs and concrete columns possessing a height of 2 in and a diameter of 1 in. Before imaging, the columns were subjected to a splitting tensile strength test. The results illustrate that while there is a general decrease in …

Nano Clay-Enhanced Calcium Phosphate Cements And Hydrogels For Biomedical Applications, Udayabhanu Jammalamadaka

Doctoral Dissertations

Biomaterials are used as templates for drug delivery, scaffolds in tissue engineering, grafts in surgeries, and support for tissue regeneration. Novel biomaterial composites are needed to meet multifaceted requirements of compatibility, ease of fabrication and controlled drug delivery. Currently used biomaterials in orthopedics surgeries suffer limitations in toxicity and preventing infections. Polymethyl methacrylate (PMMA) used as bone cement suffers from limitations of thermal necrosis and monomer toxicity calls for development of better cementing biomaterials. A biodegradable/bioresorbable cement with good mechanical properties is needed to address this short coming. Metal implants used in fixing fractures or total joint replacement needs improvements …