Catalysis and Reaction Engineering Commons^™

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Zn–Assisted Synthesis Of M (Mn/Fe/Co/Ni)-N-C Catalysts For Multifunctional Electrochemical Activity, Kemila A. Chaudhary

Electronic Theses & Dissertations

The design and development of atomically dispersed M-N-C catalysts (metal (M) supported on an nitrogen-carbon (NC) matrix with high multifunctional electrocatalytic performance is desirable but proved to be very challenging. Herein, we synthesized M-N-C catalysts (M = Fe, Co, Mn, and Ni) using Zn-assisted high temperature treatment and characterized using various techniques. The prepared catalysts were tested for their electrocatalytic performance towards oxygen and hydrogen evolution reaction (OER and HER) as well as oxygen reduction reaction (ORR) in alkaline media. The results indicated that Mn-N-C catalyst showed higher performance towards both the ORR (E_1/2 = 0.90 V) and …

Ultrafast Laser Surface Structuring For Wettability Control On Copper, Akshay Arvind Nagvenkar

All Theses

Wettability is a crucial surface property influencing various phenomena, including heat transfer, cell adhesion, and corrosion. Engineering devices can achieve superior performance by precisely manipulating surface wettability. As a result, extensive research has focused on developing surfaces that exhibit either extreme water attraction (superhydrophilic) or strong water repellency (superhydrophobic). Tailoring surface wettability paves the way for numerous applications, such as drag reduction in marine vessels, controlled drug delivery, efficient water collection, advanced liquid transport systems, oil-water separation, anti-corrosion coatings, friction reduction, and self-cleaning materials. Ultrafast laser surface structuring is a promising approach for engineering multifunctional surfaces, effectively modifying material properties …

The Effect Of Catalyst Choice On Biodiesel Yield And Quality Using Waste Cooking Oil As A Feedstock, Neka Long

Honors Theses

Biodiesel is one current area of interest as a replacement for traditional diesel fuel. Benefits of biodiesel include that it can be derived from renewable resources, and it possesses properties similar to that of traditional diesel fuel. Biodiesel is often produced through a catalyzed transesterification process, which involves the use of a catalyst to aid in the conversion of triglycerides into alkyl esters. A method called the transesterification double step process (TDSP) was researched and used in this project due to the success seen using this method for the conversion of waste cooking oil to biodiesel. In this project, four …

Assessment Of Factors Contributing On Early Rotting Of Chromated Copper Arsenate Treated Utility Power Distribution Wood Poles In Tanzania, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

The study aimed to assess the factors contributing to the premature decay of Chromated Copper Arsenate (CCA) treated utility power distribution wooden poles in Tanzania. Deteriorated poles samples from various regions in Tanzania were analyzed using handheld X-ray spectrometry to quantify the retention of CCA preservative chemicals. The ages of these poles were estimated based on annual growth rings. The findings indicated that premature failure of CCA treated wooden poles is attributed to an imbalance in the chemical composition of the preservative solution. The study found that CuO retention in most samples ranged between 10-18 kg/m3, significant lower that the …

Effect Of The Cao Catalyst Concentration Based On Barnacle Shells (Tetraclita Squamosa) On Biodiesel Production From Coconut Oil, Rinjani Rakasiwi, Sri Rezeki, Nurul Hafiza, Wivina Diah Ivontianti

Makara Journal of Technology

Barnacle shells are a source of the calcium oxide (CaO) catalyst, which is nontoxic, highly alkaline, and biodegradable. This study aims to determine the characteristics and the effect of the CaO catalyst concentration obtained from the calcination of barnacle shell particles at a temperature of 900 ℃ for 2 and 4 h on the transesterification reaction of biodiesel from coconut oil. Transesterification was conducted at 65℃ for 2 h with a methanol/coconut oil molar ratio of 6:1. The concentration of the CaO catalyst was varied (i.e., 1wt%, 3wt%, 5wt%, 7wt%, and 9wt%) for coconut oil. The results of the characterization …

Production Of Potassium-Rich Biofertilizer From Composted Banana Peels And Watermelon Rinds, Neema O. Msuya

Tanzania Journal of Engineering and Technology (TJET)

This study investigated the production of biofertilizer from composted banana peels and watermelon rinds, focusing on the mineral content and its impact on plant growth. The process involved characterizing raw materials, producing biofertilizer, analyzing mineral concentrations (potassium, nitrogen and phosphorus), and evaluating its quality through Spiny Amaranth seed growth. A compost bin with three compartments was designed, testing three composting ratios of banana peels to watermelon rinds (2:1, 1:2 and 1:1). Composting was monitored on moisture content, pH, organic matter, and temperature for 37 days. The 1:1 ratio had the lowest temperature (33.45°C) and highest pH (7.08), while the 2:1 …

Variation Of Membrane Electrode Assembly Catalyst Layer In Unitized Regenerative Fuel Cell, Yollanda Nurcholifah, Dedi Rohendi, Edy Herianto Majlan, Nirwan Syarif, Addy Rachmat, Dwi Hawa Yulianti, Nyimas Febrika S

Journal of Electrochemistry

A unitized regenerative fuel cell (URFC) is a device that may function reversibly as either a fuel cell (FC) or water electrolysis (WE). An important component of this device is the Membrane electrode assembly (MEA). Therefore, this study aimed to compare the performance outcomes of MEA using electrodes with single and three catalyst layers. This study measured Electrochemical Surface Area (ECSA), Electrochemical Impedance Spectroscopy (EIS), X-ray Diffraction analysis (XRD), and X-ray Fluorescence (XRF). Furthermore, the round-trip efficiency (RTE) of the MEA, as well as the performance in FC and WE mode, was measured. In comparison, The ECSA values of Pt-Ru/C …

Performance Of Co2/H2O Co-Electrolysis In A Flat-Tube Solid Oxide Electrolysis Cell Stack Under Air-Free Environment, Xiao-Hui Zhong, Fei Wang, An-Qi Wu, Bei-Bei Han, Jian-Xin Wang, Wan-Bing Guan

Journal of Electrochemistry

This work investigates the transient performance and stability of CO₂/H₂O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell (SOEC) stack. The results show that the transient behavior of the stack with and without blowing gas in the air electrode is almost the same. With a current density of 0.67 A·cm⁻²@750 °C, the stack operated for over 200 h under co-electrolysis conditions with no air blowing, and the voltage drop rate of the stack was approximately 0.203%/100 hours. Microstructure analysis reveals significant loss of Ni particles and formation of an insulating …

Electrocatalytic Nitric Oxide Reduction To Yield Ammonia Over Fe3C Nanocrystals, Sen Lin, Lang Zhang, Tong Hou, Jun-Yang Ding, Zi-Mo Peng, Yi-Fan Liu, Xi-Jun Liu

Journal of Electrochemistry

Nitric oxide (NO), which generally originates from vehicle exhaust and industrial flue gases, is one of the most serious air pollutants. In this case, the electrochemical NO reduction reaction (NORR) not only removes the atmospheric pollutant NO but also produces valuable NH₃. Hence, through the synthesis and modification of Fe₃C nanocrystal catalysts, the as-obtained optimal sample of Fe₃C/C-900 was adopted as NORR catalyst at ambient conditions. As a result, the Fe₃C/C-900 catalyst showed an NH₃ Faraday efficiency of 76.5% and an NH₃ yield rate of 177.5 μmol·h^–1·cm^{–2 …}

Ordering Degree Regulation Of Pt2Nico Intermetallics For Efficient Oxygen Reduction Reaction, Chen-Hao Zhang, Han-Yu Hua, Jun-Hao Yang, Qian Zhang, Chang Yang, De-Li Wang

Journal of Electrochemistry

Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction (ORR). Atomic ordered intermetallic compounds (IMC) provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms, thus exhibiting superior electrocatalytic activity and durability. However, quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging. Herein, a series of ternary Pt₂NiCo intermetallic catalysts (o-Pt₂NiCo) with different ordering degree were synthesized by annealing temperature modulation. Among them, the o-Pt …

Synthesis, Crystal Structure And Some Physicochemical Properties Of Cerium Complexes Containing Beta-Diketonate Ligands, Feruza F. Fayzullayeva, Salmon M. Mukhammadiev, Gulbeka Yu. Mamatova, Shahlo Sh. Daminova

CHEMISTRY AND CHEMICAL ENGINEERING

The objective of this study is to synthesize and characterize novel Ce(III) coordination compounds utilizing the β-diketonate ligand (1,3-diphenylpropane-1,3-dione). The structures of the resulting complexes were determined through single crystal X-ray diffraction (XRD). In these complexes, the oxygen atoms of the ligand form bidentate bonds with the metal ion. The geometry surrounding the cerium ion is described as distorted square antiprismatic, influenced by the flexibility and steric hindrance of the dibenzoylmethane (dbm) ligand. Additional characterization of the newly synthesized complex was performed using IR spectroscopy, thermal analysis, and scanning electron microscopy (SEM).

Synthesis Of Acetylene Diols In The Catalytic System Of Cu(Otf)2/Thf/Tbabr, Abduvakhаb Ikramov, Lochinbek Q. Ablakulov, Odiljon E. Ziyadullayev, Sardor M. Rakhmatov, Mirjalol E. Ziyadullayev

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the work was the synthesis of acetylenediols in the Cu(OTf)₂/THF/TBABr catalytic system. The synthesis of acetylenic diols based on the alkynylation process of aliphatic and heterocyclic ketones containing two carbonyl groups in their molecules in the presence of alkyne hydrocarbons was studied for the first time using the Cu(OTf)₂/THF/TBABr catalytic system. The effects of temperature, reaction time, nature of solvent and catalyst, and molar amount of starting materials on the synthesis of acetylenic alcohols in the selected system were studied, and based on the results obtained, alternative conditions for the process were found.

Synthesis And Study Of New Complex Compounds Of Copper(Ii) And (5-Methyl-1,3,4-Thiadiazole-2-Ylsulfanil)-Acetic Acid, Ekaterina V. Kinshakova, Aziz K. Atashov, Batirbay S. Torambetov, Shakhnoza A. Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is to synthesize new copper (II) coordination compounds with a heterocyclic polydentate ligand (5-methyl-1,3,4-thiadiazole-2-ylsulfanyl) -acetic acid and to study their structure. The structure of the complexes was established by the method of X-ray diffraction analysis (XRD) of single crystals, it was shown that the complexes have a polymer structure and a coordination polyhedron of the square pyramid type, however, one of them is mono-nuclear composition (C₁₀H₁₄CuN₄O₆S₄*2H₂O)_n, and the second is bi-nuclear composition of cluster type (C₂₀H₂₀Cu_{2 …}

Synthesis Of Acetylene-Based Hetarene Derivatives In The Presence Of Catalysts, Abdulla T. Umrzokov, Abduvaxаb Ikramov, Khusnitdin M. Vapoev, Yusuf K. Zhumanov, Sardor M. Kodirov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to synthesize hetaren derivatives of acetylene amination reactions using local natural raw materials as catalyst carriers. Various grades of Oltintag and Angren kaolins, various grades of Navbakhor bentonite, as well as the opaque rock of the Karmaninsky deposit were used as catalyst carriers. Thermal, acidic and hydrothermal treatment was carried out on the appropriate sorbents, with the production of catalysts of various modifications from sorbents and active components. The processes of catalytic condensation of acetylene with ammonia were studied using modified catalysts. The effect of the reaction temperature, the active components of the catalyst, …

Mg And Fe Co-Doped Perovskites For The Electrochemical Oxidative Coupling Of Methane In Solid Oxide Electrolyzers, Luke H. Denoyer

Chemical and Biological Engineering ETDs

More efficient usage of shale gas reserves and natural gas resources will allow for higher olefin yields and lower greenhouse gas emissions. The oxidative coupling of methane (OCM) is a direct pathway for converting methane to ethylene at temperatures >700 °C. The OCM process is typically regulated via the choice of catalyst, reactor conditions, temperature range and gas mixing. The electrochemical oxidative coupling of methane (E-OCM) is a modification to the OCM reaction by controlling the oxygen content via externally applied potentials to an SOEC. Perovskite oxide catalysts are useful for E-OCM due to their flexible bond networks and desired …

New Insights Into Controlling The Functional Properties Of Tin Oxide-Based Materials, Alexandra Kuriganova, Nina Smirnova

Journal of Electrochemistry

Development of methodologies for fabrications of nanostructured materials that provide control over their microstructural features and compositions represents a fundamental step in the advancement of technologies for productions of materials with well-defined functional properties. Pulse electrolysis, a top-down electrochemical approach, has been demonstrated to be a viable method for producing nanostructured materials with a particular efficacy in the synthesis of tin oxides. This method allows for significant control over the composition and shape of the resulting tin oxides particles by modifying the anionic composition of the aqueous electrolyte, obviating the need for additional capping agents in the synthesis process and …

A Cnt Intercalated Co Porphyrin-Based Metal Organic Framework Catalyst For Oxygen Reduction Reaction, Pei-Pei He, Jin-Hua Shi, Xiao-Yu Li, Ming-Jie Liu, Zhou Fang, Jing He, Zhong-Jian Li, Xin-Sheng Peng, Qing-Gang He

Journal of Electrochemistry

The poor electronic conductivity of metal-organic framework (MOF) materials hinders their direct application in the field of electrocatalysis in fuel cells. Herein, we proposed a strategy of embedding carbon nanotubes (CNTs) during the growth process of MOF crystals, synthesizing a metalloporphyrin-based MOF catalyst TCPPCo-MOF-CNT with a unique CNT-intercalated MOF structure. Physical characterization revealed that the CNTs enhance the overall conductivity while retaining the original characteristics of the MOF and metalloporphyrin. Simultaneously, the insertion of CNTs generated adequate mesopores and created a hierarchical porous structure that enhances mass transfer efficiency. X-ray photoelectron spectroscopic analysis confirmed that the C atom in CNT …

Nanostructured Graphitic Carbon Nitride For Photocatalytic And Electrochemical Applications, Muhammad Abdul Qadeer, Iqra Fareed, Asif Hussaine, Muhammad Asim Farid, Sadia Nazir, Faheem K. Butt, Ji-Jun Zou, Muhammad Tahir, Shang-Feng Du

Journal of Electrochemistry

Graphitic carbon nitride (g-C₃N₄) exhibits great mechanical as well as thermal characteristics, making it a valuable material for use in photoelectric conversion devices, an accelerator for synthesis of organic compounds, an electrolyte for fuel cell applications or power sources, and a hydrogen storage substance and a fluorescence detector. It is fabricated using different methods, and there is a variety of morphologies and nanostructures such as zero to three dimensions that have been designed for different purposes. There are many reports about g-C₃N₄ in recent years, but a comprehensive review which covers nanostructure dimensions …

Optimization And Dft Study For Boosted Electooxidation Of Formic Acid At Niox Modified Pt Using Urea Derivatives As Blending Fuels, Aya Saada

Biochemical Engineering

This paper addresses the enhancement of formic acid electrooxidation (FAO) at Pt and Pt-NiOx nanoparticles based-catalysts assisted with urea derivatives as blending fuels. Blending formic acid with various ratios of urea derivatives showed noticeable enhancements of FAO as demonstrated by a favorable negative shift of its onset potential (Eonset) and increase of its peak current density concurrently with suppression of the amount of CO poisoning reaction intermediate. Among all the used derivatives, phenyl urea (PU) showed superior enhancing effect towards the direct FAO with a minimal CO formation together with a favorable negative shift of Eonset by 150 mV. The …

Effectiveness Of Natural Coagulants In Purification Of Industrial Wastewater: A Case Of Cactus Pads And Watermelon Seeds, Neema O. Msuya

Tanzania Journal of Engineering and Technology (TJET)

This study assessed the potential of cactus pads and watermelon seeds as natural coagulants in industrial wastewater treatment. The global characterization of the two coagulants was done by using the Fourier Transform Infrared (FTIR) to determine the specific functional groups and by zeta potential measurements. A full factorial design was used to design the experiment and analyze the effect of three factors: coagulant dosage, settling time and particle size with three levels each and one replicate on the turbidity removal. ANOVA analyses were used to determine the significance of the factors. Results show that the amino and hydroxyl groups in …

Integrating Medical Plastic Waste Pyrolysis And Circular Economy For Environmental Sustainability, Attia Attia, Mohamed Bassyouni Prof., Reem Nasser Eng., Moataz El-Bagoury Eng., Islam Shaker Eng., Yasser Elhenawy Prof., Dina Aboelela Dr.

Biochemical Engineering

A critical assessment of pyrolysis technologies and reactor designs was discussed, highlighting various reactor configurations. This study explored the influence of catalysts, temperature, heating rate, and residence time on the pyrolysis process, and addressed their effects on product distribution and composition. Safety considerations and strategies for mitigating the potential environmental impacts of pyrolysis were presented. Comparative analyses of the environmental impacts of traditional waste disposal methods versus pyrolysis-based approaches provided insights into the potential reduction of greenhouse gas emissions and other pollutants. The circular economy approach was explored in the context of medical plastic waste pyrolysis. The potential for closing …

Sustainable Aviation Fuel Production From Plastic Waste On Bifunctional Catalysts, Kamryn Culp

Williams Honors College, Honors Research Projects

Catalytic hydrocracking was studied as a chemical recycling method for converting mixed plastic polypropylene (PP) and polyvinyl chloride (PVC) waste into sustainable aviation fuel-range hydrocarbons. Addressing both plastic pollution and aviation-related CO₂ emissions, bifunctional Ni- and Pt-based catalysts supported on Al₂O₃ and TiO₂ were evaluated under 30 bar hydrogen pressure at 250 °C. The inclusion of PVC, often regarded as a catalyst poison due to chlorine content, was examined at 1 wt% and 5 wt% to assess catalyst tolerance to it and resulted performance. Reaction rates and product selectivity were analyzed using gas chromatography. Results show that Ni/TiO₂ outperformed other …

Valorization Of Biomass Derivatives To Monomers By M-Mox Catalytic Hydrogenation & Hydrodeoxygenation, William Steere, Samir Castilla-Acevedo, Ben Auer, John Styers, Alan Allgeier

UNH URC Open (2026 and after)

With increasing concern regarding global warming contributions by fossil fuels in petrochemical production, the potential use of biomass-derived molecules to serve as a more eco-friendly feedstock has grown in popularity. Specifically, sebacic acid, a versatile chemical used to produce nylons, plasticizers, and lubricants, has the potential to be obtained from bio-renewable feedstocks and alleviate environmental drawbacks from fossil fuel petrochemical production. Our research validates the catalytic conversion of the biomass-derived 2,2’-bifuran 5,5’-dicarboxylate (BFDCM) to sebacic acid (SA), through M-MO_x catalyzed hydrogenation and hydrodeoxygenation. Catalytic activity tests were conducted for four different Pd-supported catalysts (C, Al₂O₃, …

Modeling And Simulation Of A Process For Upcycling Of Low-Density Polyethylene Plastic Waste To Ethylene, Xiaoyan Wang

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ethylene is one of the most widely produced petrochemicals, with an estimated global output of 180 million metric tons in 2022. Approximately 82 million metric tons of ethylene are used annually for plastic production, primarily for polyethylene (PE), as well as polypropylene (PP) and polyvinyl chloride (PVC). The CO₂ emissions associated with PE production were approximately 14 million metric tons in 2022. Globally, an estimated 70 million metric tons of PE are produced and consumed each year, with the majority (~79%) ending up in landfills or the environment.

This project proposes a novel process in which waste low-density polyethylene (LDPE) …

Effects Of Polyolefin Types On Catalytic Hydrocracking, Kenneth Jackson Seeber

Williams Honors College, Honors Research Projects

Plastic waste recycling has become an important conversation in the last couple of decades with pollution on the rise. One of the few ways to recycle plastics is by breaking these long-chained polymers down via catalytic processes. Due to many plastic products being a blend, it is imperative that any chosen catalyst that could be used for recycling should be able to handle different types of polymers. This paper discusses how tungsten carbide over silica (W_xC/SiO₂) catalyzes the degradation of a few selected polymers and polymer blends. From this research it was determined that W_{x …}

Polystyrene Plastic Waste As An Organic Hydrogen Carrier, Alaina Bachmann

Williams Honors College, Honors Research Projects

The proposed research develops and studies catalytic chemical processes that enables using polystyrene (PS) plastic waste as solid “organic hydrogen carriers” (OHC). Demands for OHCs are driven by desire to alleviate climate change, by replacing carbon-based energy sources with hydrogen. However, hydrogen is highly flammable and difficult to store and transport so OHCs are needed to facilitate its transportation. Common OHCs are liquid petroleum chemicals with unsaturated chemical structures. They can be hydrogenated to store hydrogen and dehydronated to release hydrogen at desired application sites. The proposed research aims to investigate the following cycle: hydrogen storage by hydrogenation of PS …