Open Access. Powered by Scholars. Published by Universities.®
Catalysis and Reaction Engineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Chemistry (22)
- Physical Sciences and Mathematics (22)
- Materials Chemistry (21)
- Physical Chemistry (21)
- Environmental Chemistry (18)
-
- Electrical and Computer Engineering (7)
- Nanoscience and Nanotechnology (7)
- Nanotechnology Fabrication (7)
- Transport Phenomena (5)
- Electronic Devices and Semiconductor Manufacturing (4)
- Polymer Science (4)
- Power and Energy (4)
- Civil and Environmental Engineering (3)
- Membrane Science (3)
- Other Chemical Engineering (3)
- Computational Engineering (2)
- Electrical and Electronics (2)
- Environmental Engineering (2)
- Thermodynamics (2)
- Analytical Chemistry (1)
- Design of Experiments and Sample Surveys (1)
- Electromagnetics and Photonics (1)
- Statistics and Probability (1)
- Systems and Communications (1)
- Keyword
-
- Carbon nanotubes (7)
- Fuel cells (6)
- Electrocatalysis (5)
- Poisoning (5)
- Hydrogen (4)
-
- Catalytic activity (3)
- Iron (3)
- Acetic acid (2)
- Carbon monoxide (2)
- Catalyst (2)
- Catalyst particle (2)
- Dry reforming (2)
- Electrochemical Sensor (2)
- Ethane (2)
- Ethylene (2)
- Formic acid (2)
- Fuel cells; Methanol electro-oxidation; Nickel oxide nanoparticles; Manganese oxide nanoparticles; Electrocatalysis (2)
- Glucose electro-oxidation (2)
- H2 production (2)
- Methane (2)
- Methanol oxidation (2)
- MoVNbPd catalyst (2)
- Nanoparticles (2)
- Optimization (2)
- Partial oxidation (2)
- Pt nanoparticles (2)
- Response Surface Methodology (2)
- Silver Nanoparticles (2)
- Stability (2)
- Transition metal oxides (2)
Articles 1 - 30 of 68
Full-Text Articles in Catalysis and Reaction Engineering
Methane Partial Oxidation With Ni-Mg-Al Hydrotalcites: Impact Of Magnesium On Catalyst Performance, Dalia A. Ali Dr.
Methane Partial Oxidation With Ni-Mg-Al Hydrotalcites: Impact Of Magnesium On Catalyst Performance, Dalia A. Ali Dr.
Chemical Engineering
The partial oxidation of methane (POM) is a promising route for hydrogen-rich syngas production with lower energy requirements compared to steam reforming. Herein, Ni-incorporated Mg-Al hydrotalcite- derived mixed oxide catalysts (5Ni-HT-x, x = 60, 65, 70, 75 wt.% Mg) were synthesized via co-precipitation and evaluated for CH₄ conversion and H₂ yield. Characterization techniques, including X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), BET, H₂-TPR, TEM, FTIR, TGA, and Raman spectroscopy, were employed to investigate catalyst structure, active site stability, and carbon deposition. As a constituent of hydrotalcite-derived mixed oxides (HT), Ni2+ is strongly bound within the hydrotalcite- derived mixed oxides structure, …
Boosted Electrochemical Oxidation Of Methanol At Feox/Pd/Au Ternary Nanocatalyst, Ghada El-Nowihy
Boosted Electrochemical Oxidation Of Methanol At Feox/Pd/Au Ternary Nanocatalyst, Ghada El-Nowihy
Chemical Engineering
In this paper, a highly effective catalyst for methanol electrochemical oxidation (MEO) was developed by the sequential deposition of spherical gold nanoparticles (nano-Au) on a glassy carbon (GC) rod’s surface followed by palladium nanoparticles (nano-Pd), then, iron oxide nanoparticles (nano-FeOx) to form FeOx/Pd/Au/GC catalyst. The sequence of catalyst’s layers proved crucial in optimizing its performance towards MEO. Notably, FeOx/Pd/Au/GC electrode produced a remarkable enhancements in the catalytic activity (by 7 times) and stability (approximately 16 fold) when compared to those produced at Pd/GC rod. Additionally, the onset potential for MEO was significantly reduced by approximately 40 mV. Through material and …
Experimentally Driven Numerical Model Of Carbon/Polyaniline-Based Glucose Monitoring Sensors: An Evaluation Using A New Figure Of Merit, Ziad Khalifa, Kyrillos Selim, Amira Ali, Sameh Abdellatif
Experimentally Driven Numerical Model Of Carbon/Polyaniline-Based Glucose Monitoring Sensors: An Evaluation Using A New Figure Of Merit, Ziad Khalifa, Kyrillos Selim, Amira Ali, Sameh Abdellatif
Chemical Engineering
This study presents an experimentally driven numerical model for evaluating carbon/polyaniline (PANI)- based glucose monitoring sensors (GMSs), focusing on innovative configurations using graphene-PANI and carbon nanotube (CNT)-PANI composites. We performed a thorough analysis of the morphological, electrophysical, and electrical properties of these materials, ultimately leading to the extraction of key electrical parameters for integration into a finite element model (FEM). This model simulates the entire sensor, enabling the estimation of critical performance metrics such as sensitivity, limit of detection (LOD), linearity, and power consumption. Our findings demonstrate that the CNT-PANI configuration significantly outperforms the laser-induced graphene (LIG)-PANI electrode, achieving a …
Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Dr., Nada Alkhashab Eng., Ahmed Osman Dr., Dalia A. Ali Eng
Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Dr., Nada Alkhashab Eng., Ahmed Osman Dr., Dalia A. Ali Eng
Chemical Engineering
Water scarcity is a critical issue worldwide. This study explores a novel method for addressing this issue by using ductile cast iron (DCI) solid waste as an adsorbent for phosphate ions, supporting the circular economy in water remediation. The solid waste was characterized using XRD, XRF, FTIR, and particle size distribution. Wastewater samples of different phosphate ion concentrations are prepared, and the solid waste is used as an adsorbent to adsorb phosphate ions using different adsorbent doses and process time. The removal percentage is attained through spectrophotometer analysis and experimental results are optimized to get the optimum conditions using Design …
Voltammetric Determination Of Hydrogen Peroxide At Decorated Palladium Nanoparticles/Poly 1,5- Diaminonaphthalene Modified Carbon-Paste Electrode, Ziad Khalifa, Mohamed Fathi Abo Oura, Magdi Abdelazzem, Ablah Hathoot
Voltammetric Determination Of Hydrogen Peroxide At Decorated Palladium Nanoparticles/Poly 1,5- Diaminonaphthalene Modified Carbon-Paste Electrode, Ziad Khalifa, Mohamed Fathi Abo Oura, Magdi Abdelazzem, Ablah Hathoot
Chemical Engineering
In this work, palladium nanoparticles (PdNPs)/p1,5-DAN/ carbon paste electrode (CPE) and p1,5-DAN/CPE sensors have been developed for determination of hydrogen peroxide. Both sensors showed a highly sensitive and selective electrochemical behaviour, which were derived from a large specific area of poly 1,5 DAN and super excellent electroconductibility of PdNPs. PdNPs/p1,5-DAN/CPE exhibited excellent performance over p1,5-DAN/CPE. Thus, it was used for detecting hydrogen peroxide (H2O2) with linear ranges of 0.1 to 250 μM and 0.2 to 300 μM as well as detection limits (S/N= 3) of 1.0 and 5.0 nM for square wave voltammetry (SWV) and cyclic voltammetry (C.V) techniques, respectively. …
Unveiling The Indoor Performance Of Perovskite/Silicon Tan‑Dem Solar Cells: A Comprehensive Exploration Through Numerically Modelled Energy Band Diagrams, Ziad Khalifa, Sameh O. Abdellatif, Alexander De-Bernardinis, Muath Alkadi, Mostafa Ganoud, Saif Qaid
Unveiling The Indoor Performance Of Perovskite/Silicon Tan‑Dem Solar Cells: A Comprehensive Exploration Through Numerically Modelled Energy Band Diagrams, Ziad Khalifa, Sameh O. Abdellatif, Alexander De-Bernardinis, Muath Alkadi, Mostafa Ganoud, Saif Qaid
Chemical Engineering
This paper delves into the indoor performance analysis of Perovskite/Silicon Tandem Solar Cells (PSSTC) through a detailed exploration utilizing numerically modeled energy band diagrams. The primary objective is to uncover the potential of PSSTC for solar energy conversion in indoor settings. Various tandem cell configurations are scrutinized under diverse artificial lighting spectra, with an innovative Li4Ti5O12/ CsPbCl3/MAPbBr3/CH3NH3PbI3/ Si architecture achieving an exceptional maximum power conversion efficiency of 25.25%. This represents a substantial efficiency enhancement of nearly 7% compared to standalone Silicon cells. The study underscores the significance of design optimization in maximizing performance. The energy band diagram analysis reveals a …
Optoelectronic And Morphological Surface Resistance Evaluation Of Laser-Induced Graphene Counter Electrodes For Potential Applications In Cesium Lead Halide Perovskite Solar Cells, Ziad Khalifa, Sameh Osama Abdellatif, Rami Ghannam
Optoelectronic And Morphological Surface Resistance Evaluation Of Laser-Induced Graphene Counter Electrodes For Potential Applications In Cesium Lead Halide Perovskite Solar Cells, Ziad Khalifa, Sameh Osama Abdellatif, Rami Ghannam
Chemical Engineering
This study investigates the physicochemical, optical, and electrical characterization of laser-induced graphene (LIG) samples for integration as counter electrodes in cesium lead halide perovskite solar cells. The impact of laser processing parameters on electrode performance is explored, including laser power, laser speed, and beam defocus. Density functional theory (DFT) computational modeling is employed for atomistic investigation and work function estimation, demonstrating the density of states (DOS), quantum capacitance of the graphene sheets, and energy work function. NiO is utilized as a hole transport layer, and the energy work function of LIG is tuned accordingly. SEM measurements estimate thin film porosity, …
Exploring The Morphological Surface Resistance And Optical Absorption Of Thin Black Carbon Nanotube Films For Electronic And Optoelectronic Devices, Ziad Khalifa, Sameh Osama Abdellatif
Exploring The Morphological Surface Resistance And Optical Absorption Of Thin Black Carbon Nanotube Films For Electronic And Optoelectronic Devices, Ziad Khalifa, Sameh Osama Abdellatif
Chemical Engineering
This study investigates the optical and electrical properties of thin black films of carbon nanotubes (CNTs) fabricated under various conditions to explore their potential integration as either a perfect broadband absorber or enhanced counter electrode. The study involves SEM measurements, surface resistance measurements, and UV–Vis. spectrometer analysis. The results show that the CNT thin films exhibit high electrical conductivity and strong light absorption across various wavelengths. Optically, we investigated the impact of varying the growth temperature and catalyst temperature on the absorption profile of the thin films. The fabricated and deposited CNTs showed broadband absorption spectra, reaching 92.8% of the …
Process Optimization For Syngas Production From The Dry Reforming Of Methane Over 5ni+3sr/10zr+Al Catalyst Using Multiple Response Surface Methodology, Ahmed Al-Fatesh Dr., Mai H. Roushdy, Radwa El-Salamony Dr., Saba Alwan Dr., Ahmed Osman Dr., Sadeq Al-Faresh Dr., Hamid Ahmed Dr., Anis Fakeeha Dr., Ahmed Ibrahim Dr.
Process Optimization For Syngas Production From The Dry Reforming Of Methane Over 5ni+3sr/10zr+Al Catalyst Using Multiple Response Surface Methodology, Ahmed Al-Fatesh Dr., Mai H. Roushdy, Radwa El-Salamony Dr., Saba Alwan Dr., Ahmed Osman Dr., Sadeq Al-Faresh Dr., Hamid Ahmed Dr., Anis Fakeeha Dr., Ahmed Ibrahim Dr.
Chemical Engineering
5Ni+3Sr/10Zr+Al catalyst is synthesized using the impregnation method, characterized, and tested for dry reforming of methane. The influence of reaction temperature, feed ratio (CO2/CH4), and gas hour space velocity are examined using multiple response surface methodology through three factors in, a four-level central composite design. Second and higher-order regression models are applied to evaluate the interaction between the process parameters and responses. The results indicate that the reaction temperature is the most influential followed by the space velocity, while the feed ratio has a weak effect. The optimum values that maximize each of the response variables are found to be …
Origin Of Capacitance In Perovskite Solar Cells: Insight Vision On The Energy Band Diagram, Ziad Khalifa, Sameh Abdellatif, Monica Roman
Origin Of Capacitance In Perovskite Solar Cells: Insight Vision On The Energy Band Diagram, Ziad Khalifa, Sameh Abdellatif, Monica Roman
Chemical Engineering
In recent years, perovskite solar cells (PSCs) have made significant progress, with fast improvements in energy conversion. Although they have become incredibly efficient in a short amount of time, they still face several obstacles before becoming a viable commercial technology. Researchers spent time looking for an equivalent circuit that could describe the J-V curves of PSCs and demonstrate the physical processes of optical absorption and carrier transit. In this paper, we proposed a model of perovskite solar cells (PSCs) using SCAPS software to determine the parasitic elements and show the solar cell's behavior. A previous model of a perovskite solar …
Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Chemical Engineering
In this study, the formic acid electro-oxidation reaction (FAEOR) was catalyzed on a Pd-Au co-electrodeposited binary catalyst. The kinetics of FAEOR were intensively impacted by changing the Pd2+:Au3+ molar ratio in the deposition medium. The Pd1-Au1 catalyst (for which the Pd2+:Au3+ molar ratio was 1:1) acquired the highest activity with a peak current density for the direct FAEOR (Ip) of 4.14 mA cm−2 (ca. 13- times higher than that (ca. 0.33 mA cm−2) of the pristine Pd1-Au0 catalyst). It also retained the highest stability that was denoted in fulfilling ca. 0.292 mA cm−2 (ca. 19-times higher than 0.015 …
Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Chemical Engineering
A propitious binary catalyst composed of Pt and Cu which were electrodeposited simultaneously onto a glassy carbon (GC) substrate was recommended for the formic acid (FA) electro-oxidation reaction (FAOR); the principal anodic reaction in the direct FA fuel cells (DFAFCs). The simultaneous co-electrodeposition of Pt and Cu in the catalyst provided an opportunity to tune the geometric functionality of the catalyst to resist the adsorption of poisoning CO at the Pt surface that represented the major impediment for DFAFCs marketing. The catalytic activity of the catalyst toward FAOR was significantly influenced by the (Pt4+/Cu2+) molar ratio of the electrolyte during …
Investigating The Variation In The Optical Properties Of Tio2 Thin-Film Utilized In Bifacial Solar Cells Using Machine Learning Algorithm, Ziad Khalifa, Sameh Abdellatif, Ahmed Fathi, Kareem Abdullah, Minatallah Hassan
Investigating The Variation In The Optical Properties Of Tio2 Thin-Film Utilized In Bifacial Solar Cells Using Machine Learning Algorithm, Ziad Khalifa, Sameh Abdellatif, Ahmed Fathi, Kareem Abdullah, Minatallah Hassan
Chemical Engineering
Among various solar cell architectures, dye-sensitized solar cells (DSSCs) and perovskite solar cells have demonstrated the capability of being bifacial as both can be fabricated on conducting glass electrodes. In both cells, TiO2 plays a key role in the optoelectronic properties of the cell. Various studies have reported a range of recipes and deposition techniques for TiO2 thin films. Such variety introduces some uncertainties into the optical properties of the prepared films as well as in the process repeatability. Here, we utilized machine learning methods to correlate the film porosity to the film refractive index, making it capable of studying …
Castor Oil Conversion To Biodiesel: A Process Simulation Study, Islam M. Al-Akraa
Castor Oil Conversion To Biodiesel: A Process Simulation Study, Islam M. Al-Akraa
Chemical Engineering
No abstract provided.
Effect Of Palladium Loading On Catalytic Properties Of Pd/Gce For The Electro-Oxidation Of Methanol, Formic Acid, And Ethylene Glycol, Islam M. Al-Akraa
Effect Of Palladium Loading On Catalytic Properties Of Pd/Gce For The Electro-Oxidation Of Methanol, Formic Acid, And Ethylene Glycol, Islam M. Al-Akraa
Chemical Engineering
No abstract provided.
A Competent Mwcnt-Grafted Mnox/Pt Nanoanode For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad, Moutaz Mamdouh, Yasser M. Asal
A Competent Mwcnt-Grafted Mnox/Pt Nanoanode For The Direct Formic Acid Fuel Cells, Islam M. Al-Akraa, Ahmad M. Mohammad, Moutaz Mamdouh, Yasser M. Asal
Chemical Engineering
No abstract provided.
Hybrid Hydro-Pyrometallurgical Process For Zn Recovery From Electric Arc Furnace Dust, Rana Adel Bayoumi, Nabil Mahmoud Abdelmenem, Moustafa Aly Soliman, Ibrahim Mohamed Ismail, Ahmed Ahmed Refaat
Hybrid Hydro-Pyrometallurgical Process For Zn Recovery From Electric Arc Furnace Dust, Rana Adel Bayoumi, Nabil Mahmoud Abdelmenem, Moustafa Aly Soliman, Ibrahim Mohamed Ismail, Ahmed Ahmed Refaat
Chemical Engineering
Electric arc furnace dust (EAFD) which is considered hazardous waste, contains significant amounts of Zinc (Zn), iron (Fe), and some dangerous elements. Zn exists in the dust as Zinc Oxide (ZnO) and Zinc Ferrite (ZnFe2O3) which is difficult to be leached with traditional methods. The main objective of the suggested process is to recover Zn from EAFD by using a hybrid pyro/hydrometallurgical method. This method includes mixing cement dust and EAFD and heating the mixture in a pyrometallurgical treatment step to convert ZnFe2O3 to ZnO. This step is followed by leaching the treated dust with sodium hydroxide (NaOH) solution using …
Biodiesel Production From Castor Oil: Mixing Optimization During Transestrification, Islam M. Al-Akraa
Biodiesel Production From Castor Oil: Mixing Optimization During Transestrification, Islam M. Al-Akraa
Chemical Engineering
No abstract provided.
Recent Advances In Silver Nanoparticle-Based Electrochemical Sensors For Determining Organic Pollutants In Water, Ziad Khalifa, Moustafa Zahran, Magdy Zahran, Magdi Abdelazzem
Recent Advances In Silver Nanoparticle-Based Electrochemical Sensors For Determining Organic Pollutants In Water, Ziad Khalifa, Moustafa Zahran, Magdy Zahran, Magdi Abdelazzem
Chemical Engineering
Water pollutants have attracted great attention because of their negative effect on human health. Accordingly, various analytical techniques have been investigated to detect water pollutants as a preliminary step for their control. This review highlights silver nanoparticles (AgNPs) as promising electrochemical probes studied for detecting organic pollutants. Electrochemical sensors can be fabricated by modifying electrode surfaces using AgNPs via different techniques, such as electrochemical deposition, drop casting, spin coating, sticking, and transfer sticking, as well as carbon paste-based modification. AgNPs at electrode surfaces can be identified by their stripping to form Ag+ with a particular oxidation peak. Additionally, they can …
Gum Arabic-Capped Silver Nanoparticles For Electrochemical Amplification Sensing Of Methylene Blue In River Water, Ziad Khalifa, Moustafa Zahran, Magdy Zahran, Magdi Abdelazzem
Gum Arabic-Capped Silver Nanoparticles For Electrochemical Amplification Sensing Of Methylene Blue In River Water, Ziad Khalifa, Moustafa Zahran, Magdy Zahran, Magdi Abdelazzem
Chemical Engineering
Herein, a novel electrochemical amplification sensor is developed for detecting methylene blue (MB) us- ing gum Arabic-capped silver nanoparticles (AgNPs) for the first time. Gum Arabic-AgNPs were fabricated via a direct chemical reduction technique using silver nitrate as an AgNPs precursor and gum Arabic as a reducing and capping agent. They were characterized using ultraviolet-visible (UV–Vis) spectrophotom- etry, square wave voltammetry (SWV), and transmission electron microscopy (TEM). UV–Vis and SWV results show the characteristic absorption and electrochemical oxidation peaks of the AgNPs at 431 nm and 0.18 V, respectively. Additionally, TEM images of the AgNPs show that they are spherical …
Abiotic Sensor For Electrochemical Determination Of Chlorpyrifos In Natural Water Based On The Inhibition Of Silver Nanoparticles Oxidation, Ziad Khalifa, Moustafa Zahran, Magdy Zahran, Magdi Abdelazzem
Abiotic Sensor For Electrochemical Determination Of Chlorpyrifos In Natural Water Based On The Inhibition Of Silver Nanoparticles Oxidation, Ziad Khalifa, Moustafa Zahran, Magdy Zahran, Magdi Abdelazzem
Chemical Engineering
Chlorpyrifos, organophosphorus pesticide, is a persistent organic pollutant that may cause serious health problems. Herein, a simple, green, and sensitive electrochemical inhibition sensor based on silver nanoparticles (AgNP)-modified glassy carbon (GC) electrode was developed for the determination of chlorpyrifos in natural water for the first time. The chemical reduction technique based on natural reducing and capping agents such as dissolved organic matter (DOM), natural latex (NL) and mucilage was employed for AgNP synthesis. DOM-AgNP, NL-AgNP, and Mucilage-AgNP were immobilized on GC by sticking technique under the same voltammetric and electrolytic conditions. The oxidation behavior of the three modified electrodes was …
Preparation Of Co-Electrodeposited Pd-Au Nanocatalyst For Methanol Electro-Oxidation, Islam M. Al-Akraa, Ahmad M. Mohammad, Yaser M. Asal, Sayed S. Abd El Rehim
Preparation Of Co-Electrodeposited Pd-Au Nanocatalyst For Methanol Electro-Oxidation, Islam M. Al-Akraa, Ahmad M. Mohammad, Yaser M. Asal, Sayed S. Abd El Rehim
Chemical Engineering
No abstract provided.
Mucilage-Capped Silver Nanoparticles For Glucose Electrochemical Sensing And Fuel Cell Applications, Ziad Khalifa, Moustafa Zahran Dr, Magdy Zahran Prof, Magdi Abdel Azzem Prof
Mucilage-Capped Silver Nanoparticles For Glucose Electrochemical Sensing And Fuel Cell Applications, Ziad Khalifa, Moustafa Zahran Dr, Magdy Zahran Prof, Magdi Abdel Azzem Prof
Chemical Engineering
A simple, cost-effective and green mucilage-capped silver nanoparticles (Mucilage-AgNPs) modified glassy carbon electrode (GC) composite was constructed for efficient and facile electrochemical oxidation of glucose for the first time. Mucilage-AgNPs were synthesized through the direct chemical reduction of Ag+ by mucilage extracted from Opuntia ficus-indica. Mucilage-AgNPs were identified and characterized using ultraviolet-visible spectroscopy, transmission electron microscopy and square wave voltammetry. Modification of the GC with AgNPs was carried out via a transfer-sticking technique with an immobilization time of 1 h. The Mucilage-AgNPs/GC composite was studied as a possible anode for glucose oxidation in a biofuel cell. The composite resulted in …
Isotherm And Kinetics Study For The Adsorption Of Nitrate From An Aqueous Solution Using A Modified Rice Straw, Dalia A. Ali Eng, Mohamed A. Sadek Prof., Nagwa Mahmoud Al-Mansi Prof, Ahmad Wafiq Aboelnasr Dr.
Isotherm And Kinetics Study For The Adsorption Of Nitrate From An Aqueous Solution Using A Modified Rice Straw, Dalia A. Ali Eng, Mohamed A. Sadek Prof., Nagwa Mahmoud Al-Mansi Prof, Ahmad Wafiq Aboelnasr Dr.
Chemical Engineering
In this research, modified rice straw (MRS) is proposed. The proposed production process of the modified rice straw (MRS) adsorbent is carried out by precipitation of iron nano particles on the surface of acid activated rice straw. The nitrate adsorption is carried out through batch experiments. The optimum nitrate removal 94.8 % was achieved at pH = 7, adsorbent dose 3 = g/L, 150 rpm, initial nitrate concentration = 23 mg/L and contact time 180 = min. The new adsorbent synthesis, kinetics and isotherm models were studied. The nitrate adsorption was well described by pseudo second order kinetic model (R2 …
Optimization Of Nitrate Removal From Aqueous Solution By Acid-Activated Rice Straw Supported Nano Zero-Valent Iron Using Response Surface Methodology, Dalia A. Ali Eng, Nagwa Mahmoud Al-Mansi Prof, Mohamed Amin Sadek Prof., Ahmad Wafiq Abolnasr Dr.
Optimization Of Nitrate Removal From Aqueous Solution By Acid-Activated Rice Straw Supported Nano Zero-Valent Iron Using Response Surface Methodology, Dalia A. Ali Eng, Nagwa Mahmoud Al-Mansi Prof, Mohamed Amin Sadek Prof., Ahmad Wafiq Abolnasr Dr.
Chemical Engineering
Rice straw is one of the most common agricultural wastes due to its large production amounts. Energy valorization of rice straw is a technology used for nitrate removal as the produced ashes used to generate the adsorbent by means of an alkali dissolution followed by acid precipitation. The novelty of the proposed process is that the production of the nano zero-valent iron supported acid-activated rice straw (AARS-nZVI) adsorbent is carried out without the energy valorization process but, through an acid activation for rice straw followed by precipitation of nZVI particles on its surface. The new adsorbent synthesis, characterization and application …
Natural Latex-Capped Silver Nanoparticles For Two-Way Electrochemical Displacement Sensing Of Eriochrome Black T, Ziad Khalifa, Moustafa Zahran Dr, Magdy Zahran Prof, Magdi Abdel Azzem Prof
Natural Latex-Capped Silver Nanoparticles For Two-Way Electrochemical Displacement Sensing Of Eriochrome Black T, Ziad Khalifa, Moustafa Zahran Dr, Magdy Zahran Prof, Magdi Abdel Azzem Prof
Chemical Engineering
No abstract provided.
Individual And Simultaneous Voltammetric Determination Of Ultra- Trace Environmental Contaminant Dihydroxybenzene Isomers Based On A Composite Electrode Sandwich-Like Structure, Ziad Khalifa, Khalid Hassan Dr, Mohamed Fathi Abo Oura Mr, Abla Hathoot Prof, Magdi Abdel Azzem Prof
Individual And Simultaneous Voltammetric Determination Of Ultra- Trace Environmental Contaminant Dihydroxybenzene Isomers Based On A Composite Electrode Sandwich-Like Structure, Ziad Khalifa, Khalid Hassan Dr, Mohamed Fathi Abo Oura Mr, Abla Hathoot Prof, Magdi Abdel Azzem Prof
Chemical Engineering
An advanced electroanalytical technique for the simultaneous assessment of environmental contaminant dihydroxybenzene isomers, catechol (CC), hydroquinone (HQ), and resorcinol (RC), has been investigated using palladium nanoparticles (PdNPs) incorporated onto a poly(1,5-diaminonaphthalene) (DAN) matrix over a glassy carbon electrode (GCE). Concurrently, these types of phenols can be assessed by the PdDAN/GCE modified electrode employing square wave voltammetry and cyclic voltammetry (CV) techniques under optimal conditions. This modified electrode has demonstrated linear responses for CC, HQ, and RC from 50.0 to 1000.0 mM; concomitantly, low detection limits of 0.22, 0.22, and 0.47 nM and low quantification limits of 0.740, 0.758, and 1.590 …
The Role Of Electrolytically Deposited Palladium And Platinum Metal Nanoparticles Dispersed Onto Poly(1,8- Diaminonaphthalene) For Enhanced Glucose Electrooxidation In Biofuel Cells, Ziad Khalifa, Khalid Hassan Dr, Ghada Elhaddad Dr, Magdi Abdel Azzem Prof
The Role Of Electrolytically Deposited Palladium And Platinum Metal Nanoparticles Dispersed Onto Poly(1,8- Diaminonaphthalene) For Enhanced Glucose Electrooxidation In Biofuel Cells, Ziad Khalifa, Khalid Hassan Dr, Ghada Elhaddad Dr, Magdi Abdel Azzem Prof
Chemical Engineering
Glucose biofuel cells are one of the promising power supplies with a competent long-term stability and power density. In this respect, catalysts of palladium (Pd) and platinum (Pt) metal nanoparticles film coated electrode were fabricated for biofuel cell. The Pt and Pd particles were electrochemically deposited onto glassy carbon (GC) electrode modified with poly(1,8-diaminonaphthalene), (p-1,8-DAN), via single or layer-by-layer electrodeposition. In results, Pt/p-1,8-DAN/GC, Pd/p-1,8-DAN/GC, Pt-Pd/p-1,8- DAN/GC and Pd-Pt/p-1,8-DAN/GC shell-core catalysts were fabricated and characterized by several ana- lytical techniques such as AFM, EDX,SEM, TEM, and XPS, in addition to electrochemical methods. Their catalytic electrooxidation behaviors of glucose were investigated in …
Enhanced Water Electrolysis: Effect Of Temperature On The Oxygen Evolution Reaction At Cobalt Oxide Nanoparticles Modified Glassy Carbon Electrodes, Aya Akl, Hany A. Elazab, Mohamed A. Sadek, Mohamed S. El-Deab
Enhanced Water Electrolysis: Effect Of Temperature On The Oxygen Evolution Reaction At Cobalt Oxide Nanoparticles Modified Glassy Carbon Electrodes, Aya Akl, Hany A. Elazab, Mohamed A. Sadek, Mohamed S. El-Deab
Chemical Engineering
Water splitting producing hydrogen and oxygen gases appears promising in view of the increasing need of renewable energy sources and storage strategies. Investigation of stable and highly efficient electrocatalysts for oxygen evolution reaction (OER) is targeted in this study at cobalt oxide nanoparticle modified glassy carbon (nano-CoOx/GC) electrodes. The effect of the preparation (Tp) and measuring temperature (Tm) on the electrocatalytic activity of nano-CoOx/GC towards the OER is investigated under various operating conditions. Linear sweep voltammetry (LSV), cyclic voltammetry (CV) as well as SEM and XRD techniques were used to probe the electrocatalytic and morphological characteristics of nano-CoOx prepared under …
Dissolved Organic Matter-Capped Silver Nanoparticles For Electrochemical Aggregation Sensing Of Atrazine In Aqueous Systems, Ziad Khalifa, Moustafa Zahran Dr, Magdy Zahran Prof, Magdi Abdel Azzem Prof
Dissolved Organic Matter-Capped Silver Nanoparticles For Electrochemical Aggregation Sensing Of Atrazine In Aqueous Systems, Ziad Khalifa, Moustafa Zahran Dr, Magdy Zahran Prof, Magdi Abdel Azzem Prof
Chemical Engineering
An electrochemical sensor based on silver nanoparticles (AgNPs) was developed by immobilizing dissolved organic matter (DOM) to interact with AgNPs on a glassy carbon electrode (GC), forming a DOM/AgNP/GC composite. AgNPs have been fabricated and characterized using ultraviolet−visible spectroscopy, fluorescence spectroscopy, and transmission electron microscopy. The immobilization efficiency and stability of the DOM/AgNP/GC composite have been optimized through studying the effects of electrode material type, immobilization technique, sticking duration, supporting electrolyte, and pH using square wave anodic stripping voltammetry. The detection of atrazine (Atz), a common herbicide, in aqueous systems has a great significance because of its toxicity to humans …