Catalysis and Reaction Engineering Commons^™

Voltage-Related Power Quality Issues And Impacts On Distribution Networks With Sensitive Loads - A Review, Godwin Elinazi Mnkeni, Jackson Justo, Aviti Thadei Mushi, Bakari M. M. Mwinyiwiwa

Tanzania Journal of Engineering and Technology (TJET)

Voltage disturbances are the most important power quality (PQ) complications that customers and power utilities face in this smart era. The growing adoption of sophisticated electronic equipment and integration of renewable energy sources (RES) into power grids has increased the susceptibility of power distribution networks (PDNs) to voltage sags, swells, interruptions, flicker, and voltage imbalance. These disturbances, mainly caused by upstream faults, switching operations, and RES integration, compromise voltage PQ and system reliability. Consequently, they accelerate equipment degradation, increase electronic waste (e-waste), raise reactive power demand and maintenance costs, increase power losses, and impose substantial economic losses on customers and …

Physicochemical Properties And Chemical Compositions Of Cashew Nut Shell Liquid Extracted With Carbon Dioxide–Expanded Hexane, Neema Msuya, Joseph Yn Philip, Frank Jacob, Kando K. Janga

Tanzania Journal of Engineering and Technology (TJET)

Cashew nut shell liquid (CNSL) is a mixture of phenolic compounds that can effectively replace commercially available phenols in various applications. This study investigated the physicochemical properties and chemical composition of CNSL extracted using CO₂–expanded hexane (CXH) and compared to the traditional Soxhlet extraction method. Steamed cashew nut shells (sCNS) were used in both cases.  The CXH was carried under varying CO₂-mole fractions (0.468-0.892) and temperatures (20-36 °C) whereas Soxhlet extraction was performed at atmospheric pressure and hexane boiling point. Response Surface Methodology (RSM) with Central Composite Face-Centred Design (CCFD) was employed to evaluate the effect …

Investigation Of Heavy Metal Composition And Associated Health Risks From Selected Groundwater Wells In Temeke, Dar-Es-Salaam, Justin M. Jeremiah

Tanzania Journal of Engineering and Technology (TJET)

Water quality continues to be the challenge to residents in Dar es Salaam due to various anthropogenic activities in the city. This study was conducted to assess groundwater quality by determining concentrations of heavy metals. Both probability and Nonprobability sampling techniques were used to collect samples from 40 groundwater wells in 24 wards of Temeke municipal and analysed using Microwave Plasma Atomic Emission Spectrometer (Agilent 4210 MP-AES) at the Geochemistry Laboratory of the University of Dar es Salaam. Results indicated varying heavy metal concentrations ranging from 0.71 ± 0.08 to 6.64 ± 0.21 mg/l for As, 0.02 ± 0.01 to …

Thermogravimetric Analysis And Chemical Kinetics Of Waste Tires, Mahir Mohammed Said

Tanzania Journal of Engineering and Technology (TJET)

The focus of this paper is to analyse the pyrolysis reaction of waste tires. The pyrolysis was studied experimentally using thermal and chemical kinetics. The tires were pyrolyzed using thermogravimetry at a temperature range of 200 to 600°C, with heating rates of 10, 20, and 50°C/min. The activating energy was observed to increase with increased temperature. The highest activating energy was 101.02 kJ/mol at a heating rate of 50°C/min.

Enhanced Post Deposition Annealing Conditions On The Fabrication Of High Quality Thermochromic Vanadium Dioxide Films, Nuru R. Mlyuka

Tanzania Journal of Engineering and Technology (TJET)

Sputter deposition of thermochromic VO2 thin films for smart window applications has been faced with several challenges including the need for high deposition temperature, extremely precise and narrow range of oxygen/argon flow ratio and target poisoning during sputtering. Deposition of VO2 at room temperature without oxygen followed by post-deposition annealing has been cited as one of the potential mitigations to the challenge. In this study, the effects of post-deposition annealing conditions on the structural, electrical and optical properties of VO2 thin films are reported. The films were prepared on soda lime glass substrates using DC magnetron sputtering of metallic vanadium …

Design And Optimization Of An Azeotropic Distillation Pilot Plant For The Production Of Pure Ethanol, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to design an azeotropic distillation plant using Aspen Plus® V10 software and determine optimal process conditions for producing pure ethanol greater than 95% from pre-concentrated near-azeotropic ethanol-water solution. The non-random two-liquid Redlich-Kwong thermodynamic model was the base method for property analysis and performance prediction. Modelling and simulation of the converged process were conducted for fixed column variables (R = 5, N = 12 and p = 1 atm). Plant operating parameters were varied in the range of 0 to 1 for the pre-heater vapour fraction, 2 to 10 for the column feed plates (NFP), 2 to 6 …

Sol-Gel Synthesis And Microstructure Characterization Of Nio-Tio2 Semiconductor, Godlisten N. Shao

Tanzania Journal of Engineering and Technology (TJET)

NiO-TiO2 is a fascinating p-n semiconducting binary metal oxide with unique electronic and optical properties. The NiO-TiO2 has been synthesized using complicated preparation methods and expensive precursors that hamper their large-scale production. The present study reports the preparation of NiO-TiO2 semiconductor with improved physicochemical properties. NiO-TiO2 samples were prepared through one-pot sol-gel synthesis process followed by sintering of the as-synthesized materials at temperatures ranging from 600 to 1000 °C. The role of thermal treatment and NiO content on the microstructures was exquisitely studied. The microstructure of the NiO-TiO2 samples was examined by Raman spectroscopy, XRD, XRF, SEM-EDAX, high resolution TEM, …

Study Of The Effects Of Thermal Aging Coupled With Shot-Peening Treatment Of Carbonitrided Din 1.6587 Low Alloy Steel On Retained Austenite And Residual Stresses, Richard J. Katemi

Tanzania Journal of Engineering and Technology (TJET)

This work investigated the effects of thermal aging and shot-peening of carbonitrided 1.6587 steel grade on retained austenite and residual stresses. After carbonitriding samples contained maximum of 0.87% carbon, 0.34% nitrogen and 50 mass. -% retained austenite. Thermal aging conditions investigated were -30°C, 90°C and 150°C while the aging period were 14, 96 and 720 hours. After thermal aging, some of the samples were subjected to shot-peening treatment using standard cut wire shots StD – G3 - 0.6 mm VDFI 8001 with intensity in the range of 0.25 to 0.30 mmA and coverage of 1.00 to 1.24 x 98%. It …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

Investigation Of Space Charge Effects On Co2 Electrocatalytic Reduction On Gd-Doped Ceria Via Scanning Kelvin Probe And Model-Based Bayesian Analysis, Alejandro Mejia

Graduate Theses, Dissertations, and Problem Reports (ETD)

In studying novel energy conversion and storage systems, such as high-temperature electrolysis, numerous underlying fundamental physical processes remain unclear or inadequately understood. Among these, the modeling and comprehension of surface reaction mechanisms, coupled with the intricate effects of space‑charge interfaces, remains an unclear and challenging area of research.

The work of this dissertation involves the development of a 2D finite element analysis model, leveraging the robust MOOSE framework from INL. This model, featuring inhomogeneous defect thermodynamics for near-surface chemistry, formulated through Poisson‑Cahn variational theory, has been exploited for studying the electrocatalytic reduction of CO₂ on gadolinia doped ceria. The …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

An Application Of M-Matrices To Preserve Bounded Positive Solutions To The Evolution Equations Of Biofilm Models, Richard S. Landry Jr.

LSU New Orleans Theses and Dissertations

In this work, we design a linear, two step implicit finite difference method to approximate the solutions of a biological system that describes the interaction between a microbial colony and a surrounding substrate. Three separate models are analyzed, all of which can be described as systems of partial differential equations (PDE)s with nonlinear diffusion and reaction, where the biological colony grows and decays based on the substrate bioavailability. The systems under investigation are all complex models describing the dynamics of biological films. In view of the difficulties to calculate analytical solutions of the models, we design here a numerical technique …

Geometric Programming As A General Method For Phase And Reaction Equilibrium Calculations, Godwill Mrema

Tanzania Journal of Engineering and Technology (TJET)

Geometric programming has been used to calculate a large mtmber ofdifferent ideal and non-ideal equilibria, including, for reaction and For non-ideal Systems the primal program is solved a number Of times With the nan-ideal terms fixed each time. After each primal solution, the nan-ideal terms are "'hdated using the corresponding dun! solution. This iteration generally converges. We have included one counter-example, where the failure is caused by the equation Of state, which Cannot giu• correct roots.

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Gasification Kinetics Of Ultrafine Coal Char Oxidation In Flame Reactions, G John

Tanzania Journal of Engineering and Technology (TJET)

Pulverized coal combustion is exceedingly complex with a  vast number of variables. In order to avoid the complications associated with the burning of coal char, a controlled study has been made of the oxidation of fine graphite in laminar methane-air flame as a contribution to the understanding of the more complex phenomena of the gasification kinetics of the char. The burning of methane is equivalent to the burning of volatiles and graphite oxidation is similar to that of coal char. Aspects of this have been simulated in experimental and computational studies of 4pm diameter graphite particle burning in methane -air …

The Decomposition Kinetics Of Solids Thermodynamic Evidence For The Enthalpy Driven Cooling Of Reaction Environment Part 2, Akwilapo D

Tanzania Journal of Engineering and Technology (TJET)

The analysis of non-isothermal kinetic data for the decomposition of calcium carbonate, CaC03 (s) ~ CaO (s) + C02 (g) in flowing nitrogen, shows that the decomposition of solids is accompanied by self-cooling/heating of the reaction environment depending on the sample mass and heating rate. The correctness of the kinetic model is established by the calculation of the enthalpy change of the reaction. This is the thermodynamic evidence of endothermic enthalpy driven cooling of the reaction environment. The enthalpy change LJH = 179.33 kJmol-1 estimated from this work for the dissociation of CaC03 is in agreement with LJH = 179.17 …

Comparative Study Of The Dynamics Of Circulating Fluidized Bed Riser And Downer Of Equal Diameters, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

The microscopic flow dynamics of the 100-mm internal diameter riser/downer circulating fluidized bed (CFB) unit were monitored using a solids concentration fiber optic probe. The comparison was conducted by comparing radial profiles Of the dynamic parameters derived from time-series analysis techniques (statistical and chaos analyses). The solids concentration signals used were recorded under similar operating conditions (gas velocity of 8.0 m/s and solids flux of 100 kg/m2s). Similar axial elevations were compared (entrance and fully developed sections of die reactors). A1 each loca!ion, the signals were sampled a! afrequency of 970 Hz for duration of 30 seconds. It was observed …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Mathematical Simulation Of The Influence Of Volatile Ma•Rrer Cloud On Heterogeneous Ignition Of Single Coal Particles, Hassan Ratal Ambula

Tanzania Journal of Engineering and Technology (TJET)

Asimple model has been developed to predict the heterogeneous ignition temperature for single coal particles under conditions of negligible, natural and forced convections. These conditions cause different sizes Of volatile matter cloud that surround the coal particle. The model is based on the ignition Of a single coal particle heated by irradiation from spot heaters in a cold (ambient) surrounding. Energy from the particle surface oxidation, volatile matter combustion and physical heating from the spot heaters are all included in rhe particle energv balance. General ignüion criterion is used to determine the ignition point. The agreement between the experimental and …

Electrokinetic Cha Raci'erisation Of Colloidal A-Alumina, J Ntalikwa

Tanzania Journal of Engineering and Technology (TJET)

Electrophoretic mobility (uD is an important rneasurable parameter in studying the electrokinetic properties of a colloid dispersion. This parameter is Often convened into zeta potential (C) Which piays a great role in thc description Of the stability towards aggregation Of dispersed particles. In this paper, measurements of Of colloidal a-alumina dispersed in various concentrations of electrolyte arc reported. It was observed that, the isoelectric points (the pH at which us = O) occurred at 7.52 ± 0.32, 8.05 ± 0.11 and 7,95 ± 0.18 in Naci, KCI and NaNOs respectively. The isoelectric point was observed to be a function Of …

Comparative Analysis Of Rng K-E And 'Standard' K-C Models For Fluid Flow Around A Cylinder, A Temu

Tanzania Journal of Engineering and Technology (TJET)

A two-dimensional computational scheme for simulating fluid flow around a cylinder was investigated. RNG (Re-NOrmalisation Group) and 'standard' turbulent closure models were used. simulation was implemented with assistance OfFLOW-3D computational fluid dynamics (CFD) code. The governing equation Of fluid motion, in Eulerian form, included body forces as well as surface forces. The computational model predictions for fluid velocity showed good agreement between the two models. Comparison Of the viscosities showed a large deviation from the two models, with RNG k-E model giving a better approximation. Comparison Of the velocity around the cylinder, as obtained from RNG k-c model, with approximation …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Turbulent Burning Model For Premixed Gaseous Mixtures, E Mushi

Tanzania Journal of Engineering and Technology (TJET)

A turbulent burning model for premixed gaseous mixtures has been successfully developed. The model assumes instant burning of vortex Tubes of the order of Kolmogorov scale followed by burning of larger eddies of the order of Taylor micro scale. These eddies burn ar a rate dependent On the stretch rate. The influence of turbulence on the burning rate is introduced in the form of probability density function which gives the probability that a given mixture under turbulence will undergo burning rather than being quenched. The model has been validated againsi experiments involving turbulent explosions in a fan stirred bomb. Model …