Catalysis and Reaction Engineering Commons^™

A Facile Route To Synthesize Pt-Wo3 Nanosheets With Enhanced Electrochemical Performance For Her, Peng-Jie Jiang, Yi Lv, Chang-Miao Chen, Hong-Cheng He, Yong Cai, Ming Zhang

Journal of Electrochemistry

Platinum-tungsten trioxide (Pt-WO₃) nanosheets were synthesized on nickel foams (NFs) directly. As great conductive networks, NFs substrates could greatly improve the electrode performance of WO₃. The modified platinum nanoparticles not only enhanced the electron transformation of catalysts, but also increased the active sites for hydrogen evolution reaction (HER). Pt-WO₃/NF revealed a better catalytic activity than WO₃/NFs with a smaller Tafel slope (80 mV·dec^-1) and a lower overpotential of 72 mV at the current density of 10 mA·cm^-2. In addition, Pt-WO₃/NF showed great durability and stability during …

Pd Nanoparticles Supported On The Etched Ni Foams As High-Performance Electrocatalysts For Direct Ethanol Fuel Cells, Chi Zhang, Cheng-Fei Li, Gao-Ren Li

Journal of Electrochemistry

The development of non-Pt anode electrocatalysts with high activity and long-term durability at low cost for fuel cells still remains enormous challenge. Here we report the Pd nanoparticles supported on Ni foams etched by the mixed acids (HNO₃+H₂SO₄+H₃PO₄+CH₃COOH) (Pd/ME-NF) that are designed and fabricated as high-performance electrocatalysts for ethanol oxidation in alkaline media. Because of the advantages of large open space, fast electrolyte penetration/diffusion and rapid electron transfer process, the Pd/ME-NF catalysts exhibited significantly improved electrocatalytic activity and durability compared with the commercial Pd/C catalysts.

Investigation Of Oxygen Reduction Reaction In Carbon-Based Electrocatalysts, Andrew Mason

Honors Program: Senior Projects (Public)

In the modern era, some global challenges are energy storage conversion. To find sustainable solutions to this problem, researchers have turned to renewable energy resources. An example of promising energy generation devices is fuel cell. Fuel cells are electrochemical systems that convert the chemical energy of the fuel to electrochemical potential that can be used as direct current (dc) generators. Although these technologies are very attractive, they are known to be expensive due to high cost of catalysts and concerns regarding their energy densities. Fuel cells composed of two electrodes, namely cathode and anode and electrolyte separating the oxidizing agents …

Synthesis Of Zif-8 For Carbon Dioxide Adsorption, Fausat Isu, Yu Lei

Von Braun Symposium Student Posters

No abstract provided.

Structure And Reactivity Of Single Site Ti Catalysts For Propylene Epoxidation, Zheng Lu, Xiaoyang Liu, Bin Zhang, Zhuoran Gan, Siwen Tang, Lu Ma, Tianpin Wu, George J. Nelson, Yong Qin, Heath C. Turner, Yu Lei

PRC-Affiliated Research

Propylene epoxidation using molecular oxygen and hydrogen mixture on Au-based catalysts has attracted attention because of high propylene oxide selectivity and the use of an inexpensive and environmental friendly oxidant. Single-site titanium on metal oxide supports plays an important role in achieving high reactivity and selectivity in propylene epoxidation. Here we used TiO2 atomic layer deposition (ALD) to synthesize single-site titanium imbedded in the SiO2 framework for propylene epoxidation. High temperature calcination was used as post-treatment to control the titania structure and Tisingle bondO coordination number. Using UV–vis spectroscopy and X-ray absorption spectroscopy, we successfully established that under similar propylene …

Structure And Reactivity Of Single Site Ti Catalysts For Propylene Epoxidation, Zheng Lu, Xiaoyang Liu, Bin Zhang, Zhuoran Gan, Siwen Tang, Lu Ma, Tianpin Wu, George J. Nelson, Yong Qin, Heath C. Turner, Yu Lei

PRC-Affiliated Research

Propylene epoxidation using molecular oxygen and hydrogen mixture on Au-based catalysts has attracted attention because of high propylene oxide selectivity and the use of an inexpensive and environmental friendly oxidant. Single-site titanium on metal oxide supports plays an important role in achieving high reactivity and selectivity in propylene epoxidation. Here we used TiO2 atomic layer deposition (ALD) to synthesize single-site titanium imbedded in the SiO2 framework for propylene epoxidation. High temperature calcination was used as post-treatment to control the titania structure and Tisingle bondO coordination number. Using UV–vis spectroscopy and X-ray absorption spectroscopy, we successfully established that under similar propylene …

Structure And Reactivity Of Single Site Ti Catalysts For Propylene Epoxidation, Zheng Lu, Xiaoyang Liu, Bin Zhang, Zhuoran Gan, Siwen Tang, Lu Ma, Tianpin Wu, George J. Nelson, Yong Qin, Heath C. Turner, Yu Lei

PRC-Affiliated Research

Propylene epoxidation using molecular oxygen and hydrogen mixture on Au-based catalysts has attracted attention because of high propylene oxide selectivity and the use of an inexpensive and environmental friendly oxidant. Single-site titanium on metal oxide supports plays an important role in achieving high reactivity and selectivity in propylene epoxidation. Here we used TiO2 atomic layer deposition (ALD) to synthesize single-site titanium imbedded in the SiO2 framework for propylene epoxidation. High temperature calcination was used as post-treatment to control the titania structure and Tisingle bondO coordination number. Using UV–vis spectroscopy and X-ray absorption spectroscopy, we successfully established that under similar propylene …

Regulation Of Copper Surface Via Redox Reactions For Enhancing Carbon Dioxide Electroreduction, Bao-Hua Hang, Jin-Tao Zhang

Journal of Electrochemistry

A large-scale application of fossil fuels has led to excessive emission of carbon dioxide (CO₂), resulting in serious environmental issues. A promising path to reducing CO₂ emissions is recycling CO₂ into valuable chemicals and fuels through an electrochemical process. Herein, the redox reactions between copper (Cu) and ferric chloride (FeCl₃) have been utilized to regulate the Cu surface composition and structure, aimed to improve the electrocatalytic activity toward CO₂ reduction. Typically, a series of samples (named Cu-1h, Cu-2h, Cu-3h and Cu-4h) were prepared via the redox reactions for various time from 1 to …

Single-Layer Oxygen Deficiency Δ-Mno2 For Electrochemical Co2 Reduction, Yue-Feng Zhang, Jian-Jun Liu, Zeng-Xi Wei, Xin-Xin Tian, Jian-Min Ma

Journal of Electrochemistry

Manganese dioxide (MnO₂) has been widely used in catalysis. In addition, since the defect engineering can change the electronic properties of the catalyst, here we have systematically studied electrocatalytic carbon dioxide reduction reaction (CO₂RR) on δ-MnO₂ with and without oxygen deficiency, denoted as Ov-MnO₂ and MnO₂, respectively. We calculate the electronic properties and the intermediate of free energy for MnO₂ and Ov-MnO₂ with the help of spin-polarized density functional theory. By analyzing this result, we can find that the introduction of defects change the δ-MnO₂ from semiconducting properties to …

Statuses, Challenges And Strategies In The Development Of Low-Temperature Carbon Dioxide Electroreduction Technology, Xu-Rui Zhang, Xiao-Lin Shao, Jin Yi, Yu-Yu Liu, Jiu-Jun Zhang

Journal of Electrochemistry

Low-temperature carbon dioxide (CO₂) electrochemical reduction technology is a hotspot for research and development in recent years as a way to reduce the negative impact of CO₂ on the environment and to generate energy storage through converting electricity to low-carbon fuels. Although basic research on catalyst activity, product selectivity, and reaction mechanism has been widely reported, the design and practicality of catalytic stability and corresponding electrochemical reactor systems have not been given sufficient attention and systematic development.  In this paper, two important factors affecting the development of CO₂ electrochemical reduction technology in low temperature aqueous solution …

Recent Advances In Bismuth-Based Co2 Reduction Electrocatalysts, Rui Zhou, Na Han, Yan-Guang Li

Journal of Electrochemistry

Carbon dioxide (CO₂) is an economical, secure and sustainable carbon resource around us. Its effective capture and recycling have been the focus of our entire society. Using the electrochemical method, CO₂ can be reduced to different value-added chemicals or fuels. This approach not only would mitigate CO₂ accumulation in the atmosphere, but also would help alleviate our dependence on fossil fuel. In this article, the basic principle and process of electrochemical CO₂ reduction are first introduced. The recent development in bismuth-based catalysts for electrocatalytic CO₂ reduction is reviewed with an emphasis on their preparation, …

Electrocatalytic Reduction Of Carbon Dioxide To Carbon Monoxide Using Cobalt Nitride, Chen Ma, Peng-Fei Hou, Peng Kang

Journal of Electrochemistry

Electrocatalytic reduction of carbon dioxide (CO₂) is a promising method to alleviate global warming issues, although it still faces many challenges. Herein, we report cobalt nitride for electrocatalytic reduction of CO₂ to carbon monoxide (CO) in an aqueous electrolyte. A comparison of catalysts with different preparation temperatures and atmospheres suggests that nitrogen doping is critical to improve catalytic activity. For the most active catalyst of 700-Co_5.47N/C, the CO current density reached 9.78 mA·cm^-2 at potential of -0.7 V vs. RHE. In addition, the CO/H₂ ratio could be adjusted from 1:3 to 3:2 by …

Effect Of Morphology Of Fe-N Codoped Carbon Nanomaterial On Electrochemical Reduction Reactions, Er-Ling Li, Fa Yang, Ming-Bo Ruan, Ping Song, Wei-Lin Xu

Journal of Electrochemistry

Graphene nanosheets (GS) and carbon nanotubes have been considered as good catalysts candidates for applications in energy conversion and storage. However, hybrids of GS and carbon nanotubes are always formed in transition metal-based nitrogen-doped system, making the system quite complex for exploring the structure-activity relationship. To prepare the catalysts with desired species controllably, we try to adjust the outcomes with the effect of nitrogen on the growth of carbon nanotubes. In this work, a series of Fe-N co-doped carbon hybrid catalysts containing N-doped GS or hybrids of GS/bamboo carbon nanotubes (BCNTs) or BCNTs were obtained with one-step pyrolyzed method. To …

Preparations And Electrocatalytic Properties Of Cu-Bipy-Btc-Derived Carbon-Based Catalyst For Oxygen Reduction Reaction, Li-Hua Zhang, Jun-Feng Chen, Wan-Tang Huang, Yong-You Hu, Jian-Hua Cheng, Yuan-Cai Chen

Journal of Electrochemistry

Efficient and low-cost oxygen reduction reaction (ORR) electrocatalyst plays a key role for fuel cells. In this paper, ORR active metal organic framework (MOF: Cu-bipy-BTC, bipy = 2,2?-bipyridine, BTC = 1,3,5-tricarboxylate) was prepared using hydrothermal method, and then carbon-based material MOF-800 was obtained from pyrolyzing Cu-bipy-BTC at 800 °C. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen sorption isotherm and X-ray photolectron spectroscopy (XPS) were used to characterize the morphologies and structures of the catalysts. Linear sweep voltammetry (LSV) and current-time curve (i-t) were adopted to evaluate the electrocatalytic properties of the catalysts. The results …

Preface To Special Issue Of Electrochemical Reduction Of Carbon Dioxide, Qing Li, Min Liu

Journal of Electrochemistry

No abstract provided.

Copper-Based Compounds For Electrochemical Reduction Of Carbon Dioxide, Fan Yang, Pei-Lin Deng, You-Jia Han, Pan Jing, Bao-Yu Xia

Journal of Electrochemistry

The electrochemical reduction of carbon dioxide (CO₂) to useful chemicals and fuels has attracted enormous interest since the deteriorating global warming and energy shortage problems resulted from ever-increasing CO₂ emission. Designing efficient catalysts is of capital significance to realize the efficient and selective conversion of CO₂. Among various catalysts explored, copper-based compounds have promising potentials with acceptable efficiency for hydrocarbon production. Herein, recent advances on copper-based materials are summarized for electrochemical CO₂ conversion. We intend to include the dimensional structure, different forms (alloy, oxide) and molecular catalysts in copper-based catalysts. Moreover, the reaction mechanisms …

Recent Progress In Copper-Based Catalysts For Electrochemical Co2 Reduction, Wen Lei, Wei-Ping Xiao, De-Li Wang

Journal of Electrochemistry

As the situation of energy crisis and environmental pollution become more and more serious, the electrochemical reduction of carbon dioxide (CO₂) has attracted lots of attention because of its multiple meanings such as environment, resources and economic benefits. In this paper, the state of the art electrochemical reduction of CO₂ in aqueous solution is reviewed, and the latest research progress in Cu-based catalysts with different structures and morphologies is summarized. In the end, the application prospects, opportunities and challenges of Cu-based materials are briefly presented to provide an outlook for future research directions.

Catalyst-Assisted Transformation Of Shale Gas To Transportation Fuels: Performance Of A Single-Site Cobalt Catalyst In Dehydrogenation And Oligomerization Processes, Ethan Edwards

The Journal of Purdue Undergraduate Research

No abstract provided.

A Study Of Protein And Peptide-Directed Nanoparticle Synthesis For Catalytic Materials, Abdollah Mosleh

Graduate Theses and Dissertations

Nanoparticles have received much attentions due to their unique properties that makes them suitable candidates for a broad range of applications. As the size of particles decreases, their surface area-to-volume ratio would increase which is the main cause of much attention. In addition to the size, their morphologies and compositions may also play important roles for defining unique properties. Nanoparticle synthesis include both bottom-up and top-down strategies. To control the process of inorganic nanoparticles synthesis one could follow the bottom-up approach to have atom-level control over their compositions, morphologies, phases, and sizes which is the subject of this work. Due …

Engineered Carbon-Nanocatalyst Composites And Carbon Mixed ‎Matrix Membranes ‎For Water And Wastewater Treatment ‎, Mojtaba Abolhassani

Graduate Theses and Dissertations

Carbonaceous materials such as graphene oxide, and activated ‎carbon have a wide range of ‎applications in water and wastewater treatment due to the high surface ‎area, unique structure, ‎and chemical and thermal stability. Carbon-based materials can be used as a ‎membrane, an ‎adsorbent, a support for nanomaterials, or ‎as a filler within membranes to remove contaminants ‎from water. In this research, the specific carbon materials and how their properties influence their ‎use and performance in ‎specific engineering applications is explored. ‎

Here, membrane filtration and adsorption/degradation of the water and wastewater using carbon-‎based material are investigated. The research firstly focuses …

A Simple And Effective Way To Overcome Carbon Monoxide Poisoning Of Platinum Surfaces In Direct Formic Acid Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Sohair A. Darwish Ms

Chemical Engineering

A glassy carbon (GC) electrode modified with multi-walled carbon nanotubes (MWCNTs) and platinum nanoparticles (PtNPs), Pt/MWCNTs-GC, has been introduced for formic acid electro-oxidation (FAO). A similar loading of PtNPs has been conserved for a proper comparison between the Pt/MWCNTs-GC and the unmodified Pt/GC electrodes. The modification with MWCNTs could enhance the loading of PtNPs onto the GC electrode in a way that minimizes its agglomeration and increases its dispersion in the CNTs network. This not only increases the surface area exposed to the reaction but also interrupts the contiguity of the Pt active sites minimizing the adsorption of the poisoning …

A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Aya A. Khalifa Ms.

Chemical Engineering

Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …

Electrocatalytic Nanomaterials For Reduction Of Hydrogen Peroxide As Potential Radioprotectors, Rui-Hong Jia, Jin-Xuan Zhang, Xiao-Dong Zhang, Mei-Xian Li

Journal of Electrochemistry

Nanomaterials have shown many potential application prospects in the biomedical field, such as medical imaging, drug delivery and biosensing due to their unique physical and chemical properties. In this review we focus on nanomaterials that have shown not only abilities of radiation protection, but also good electrocatalytic activities toward reduction reactions of hydrogen peroxide and oxygen. We discuss the abilities of radiation protection of these nanomaterials that are ascribed to their enzyme-like activities because their catalytic properties provide an effective pathway for scavenging free radicals in vivo via rapid reactions with reactive oxygen species. We also provide insights into electrocatalytic …

Nanowire Based Adsorbents/Catalysts For Co2 Capture And Utilization., Apolo Nambo

Electronic Theses and Dissertations

Even today, the major energy source is fossil fuels, which release CO₂, a greenhouse gas that contributes to global warming. CO₂ capture, storage (CCS) and/or utilization (CCU) technologies are two routes to mitigate this problem. Sorbents are being investigated in either temperature swing or pressure swing absorption approaches for carbon capture from flue gases. Solid sorbent based technology is a promising one but suffers from slow kinetics, low capacity and need for high temperatures. Thus, new sorbent materials that can have good CO₂ sorption capacity, recyclability are sought. Similarly, one of the utilization approaches for CO …

Design And Cost Analysis Of Acrylic Acid Plant, Adam Ferrier

Chemical Engineering Undergraduate Honors Theses

The purpose of this project was to model and design a plant to produce 75,000 tons per year of acrylic acid. Using the design in section B.9 of Richard Turton’s Analysis, Synthesis, and Design of Chemical Processes as a starting point, a plant was designed based around the partial oxidation of propylene to acrylic acid. The final plant design produces about 86,000 tons per year of acrylic acid. Using an interest rate of 10%, the plant has a discounted cash flow rate of return of 32% over 2 years of startup and 10 years of operation. Attached is an executive …

Synthesis, Characterization, And Evaluation Of Metal Complexes With Cancer Selective Anti-Proliferative Effects And Hydrogen Evolution Catalytic Properties., Nicholas Vishnosky

Electronic Theses and Dissertations

Bis-thiosemicarbazones (BTSC) and their metal chelates have properties that are useful in several different scientific fields. These systems have already received attention in major fields of biology and engineering. Hydrogen evolution reaction (HER) catalysts need to be cheap and operate under minimal overpotentials with a long lifetime. The treatment of cancer requires, novel agents that have potent cytotoxic activity against cancer cells while displaying minimal side effects. In this dissertation the modular synthesis of these bis-thiosemicarbazone systems is utilized to regulate the redox chemistry for employment in the desired sector of chemistry. The ligand and metal chelates synthesized were characterized …

Modeling Of Electrochemical Processes At The Magnesium Anode During Struvite Formation, Tobias Dwyer

Chemical Engineering Undergraduate Honors Theses

This study analyzes the current transients observed during the electrochemical formation of struvite from a solution of ammonium phosphate using a pure magnesium and magnesium alloy electrode. Through converting the chronoamperometric data to chronocoulometric data and fitting the data to various models, the driving mechanisms for struvite nucleation were elucidated. While the pure magnesium anode is controlled by only instantaneous nucleation at the electrode, the AZ31 alloy is nucleation controlled at short times and Cottrell diffusion controlled at long times.

Development Of A Ws2 Catalyst For Hydrogen Evolution And Improvement Via Platinum Nanoparticle Decoration, Alexander O'Brien

Chemical Engineering Undergraduate Honors Theses

In response to a growing global need to improve utilization of green energy, the concept of renewable energy storage via electrolytic hydrogen production has gained popularity in recent years. However, the prohibitive expense of the bulk platinum catalysts currently used for the hydrogen evolution reaction prevents such a concept from being widely adoptable. This research focuses on a possible alternative catalyst, nanolayer WS₂, which is capable of promoting the hydrogen evolution reaction while maintaining economic viability. Bulk WS₂ was prepared in semiconducting, nanolayer form through liquid phase exfoliation. Prepared catalyst inks consisting of this material demonstrated successful …

Effect Of Thiols For Nitrogen Reduction To Ammonia, Zakary R. Ford

Chemical Engineering Undergraduate Honors Theses

Ammonia is an important chemical used for fertilizers and also a potential carbon-free hydrogen storage medium. The Haber-Bosch process is the main production process, which requires large energy- and capital-input. Therefore, it is crucial to develop an alternate scalable synthesis that provides a less energy intensive and more economical route for synthetic ammonia production. In this paper, a 1Fe1Ni film was functionalized with C₃OH and C₆OH for the electrochemical synthesis of ammonia. This work will provide some insight into how thiol ligands can increase the selectivity of the catalyst for nitrogen reduction reaction and can be …

Preparation And Electrocatalytic Oxygen Reduction Performance Of Self-Doped Sludge-Derived Carbon, Ya-Li Ye, Wei-Ming Feng, Ge Li, Zhen-Chao Lei, Chun-Hua Feng

Journal of Electrochemistry

The development of low-cost, high-performance cathode catalysts is critical for practical application of fuel cells. Here, the N, P-doped porous graphene-like carbon with outstanding oxygen reduction reaction (ORR) performance was synthesized by pyrolysis of surplus sludge, which functioned as a self-doped, self-activated, and self-templated precursor by acclimation with continuous feedings of phenol. The results show that the amounts of microorganisms were enriched after acclimation, with increasing contents of N, P, Fe, as well as C atoms. The increasing pyrolysis temperature resulted in the formation of an ordered graphitic structure, however, the excessively high temperature induced the drop in the amounts …