Catalysis and Reaction Engineering Commons^™

Insertion Of Noble Metal Free Cathodic Catalyst Layer With Fe-N-C Catalyst For Boosted Performance Of Pemfc, Shi Zhou, Muhammad Tariq, Asif Nadeem Tabish, Muhammad Salman, Fan-Di Ning, Muhammad Rayyan Tayyab, Ran-Ran Peng, Meng-Geng Hao, Wen-Mu Li, Xiao-Chun Zhou

Journal of Electrochemistry

Economical Fe-N-C catalysts are considered as promising alternatives to platinum group metal catalysts for proton exchange membrane fuel cells (PEMFCs). Despite exhibiting robust activity on rotating disk electrodes, their performance within membrane electrode assemblies often experiences limitations, such as decreased O₂ diffusion, high H₂O₂ formation, low proton conduction, and a lower electron transfer number. In this study, key factors, including proton transport, electron conduction, and gas diffusion within air-breathing PEMFCs, have been investigated by adjusting cathode catalyst layer (CCL) compositions. From the experimental results, the optimal peak power density was obtained when the loading of Fe-N-C …

Understanding The Binding Of Nickel(Ii) Bromide To A Zirconium Metal-Organic Cage For Heterogeneous Catalysis, Luci Green

Caroliniana Undergraduate Research Journal

Heterogeneous catalysts offer inherent advantages in improving the sustainability of industrial chemical processes. Their high ease of separation and recyclability has the potential to reduce the cost, waste, and energy consumption of processes that currently rely on homogeneous catalysts. Metal–organic cages (MOCs) are an attractive material for heterogeneous catalysis due to their discrete and highly tunable structures, which can be functionalized by binding these complexes with catalytically active metals. The specific objective of this study is to provide preliminary insight into the binding of nickel(II) bromide (NiBr₂) to zirconium MOCs, which was done by studying the binding of …

Axial Sulfur-Coordination Engineering Boosting Fe–N–C Catalysts For High-Performance Proton Exchange Membrane Fuel Cells, Lin Lin, Xiu-Xuan Hou, Zhe-Chen Fan, Yi-Xuan Yin, Wei-Yi Zhao, Kai Wei, Yu-Die Zhou, Li-Na Hou, Ying Wang, Hao Wan, Jun-Jie Ge

Journal of Electrochemistry

Fe-N-C catalysts have long suffered from kinetically sluggish oxygen reduction reaction (ORR) due to excessive adsorption strength toward oxygen intermediates and low site utilization. Heteroatom doping effectively accelerates ORR reaction kinetics through electronic structure modulation of metal sites for optimal intermediate adsorption, while chemical vapor deposition (CVD) enhances the turnover frequency (TOF) of active sites. Herein, we developed an FeSNC catalyst featuring abundant FeS₁N₄ sites via a dual-precursor CVD strategy. Experimental and theoretical analyses revealed that S incorporation disrupts the symmetric coordination of active sites, which optimizes OH* adsorption energies from 0.212 eV to 1.194 eV. Moreover, …

Entropy Of Metal/Solution Interfaces: Thermodynamic Framework, Theoretical Models, And Roles Of Interfacial Water, Zeng-Ming Zhang, Zi-Xi Liang, Jun Huang

Journal of Electrochemistry

Entropy is a basic thermodynamic property of the electrical double layer (EDL) at metal/solution interfaces, yet, its definition, measurement, and theoretical treatment are dispersed in the literature, and, in some cases, ambiguous. In this paper, we revisit the thermodynamic theory of EDL, from which two variants of entropy, excess entropy and formation entropy, are obtained and compared. In terms of the formation entropy, two calculation routes are validated in the context of a primitive EDL model, namely, the Gouy-Chapman (GC) model. After clarifying the concepts and calculation routes, we investigate interfacial water effects on the EDL entropy, using a refined …

Kinetic Investigation Of The Sn2 Reaction Between Piperidine And Chloroacetic Acid Using Atr-Ftir Spectroscopy, Sadoqat O. Mamatkulova, Oytura S. Maksumova

CHEMISTRY AND CHEMICAL ENGINEERING

In this study, the kinetic characteristics of the nucleophilic substitution (SN2) reaction between piperidine and chloroacetic acid were investigated in real time at 50, 60, and 70 °C using ATR-FTIR spectroscopy. The spectral analysis revealed a gradual decrease in the C–Cl stretching vibration in the 710–730 cm⁻¹ region and a simultaneous increase in absorption bands corresponding to the C–N bond in the 1020–1250 cm⁻¹ region, confirming the consistent progression of the reaction. Analysis of the conversion function X(t) showed values of X = 0.669 at 50 °C, X = 0.826 at 60 °C, and X = 0.970 at 70 °C, …

Development Of A Catalytic System Based On N,N’,N”-Tris-(Β-Oxyethyl)Hexahydro-S-Triazine For Polyisocyanuraturethane Foam, Murod K. Karimov, Nozima M. Alimukhamedova, Lochinbek M. Khurramov, Ravshan I. Adilov, Murafar G. Alimukhamedov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to develop a catalytic system for the production of polyisocyanurateurethane foams based on N,N',N"-tris(β-hydroxyethyl)hexahydro-S-triazine (TOEGT). N,N',N"-tris(β-hydroxyethyl)hexahydro-S-triazine (TOEGT) exhibits high catalytic activity in polyurethane foam production processes. However, it exhibited moderate catalytic activity in polyisocyanurateurethane  foams, the formation of which is characterized by the sequential-parallel reactions of urethane formation, isocyanate trimerization, and foaming (isocyanate + water). By varying the composition of the catalytic mixture, the required concentrations of each component were determined, which made it possible to synthesize polyisocyanurateurethane foams that meet the requirements of casting polyurethane foams. The optimal ratio of N,N',N"-tris(β-hydroxyethyl)hexahydro-S-triazine: triethylenediamine: tin …

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu

Journal of Electrochemistry

The redox active species in all-vanadium redox flow batteries (VRFBs) reside in the electrolyte, while the heterogeneous reactions occur on the electrode surface; the electrode is therefore the decisive platform for dynamic adsorption, electron transfer, and ion conversion, especially for the VO²⁺/VO₂⁺ and V²⁺/V³⁺ couples. One of the major challenges for VRFBs is the slow charge transfer in VO²⁺/VO₂⁺ and V²⁺/V³⁺ reactions, mainly caused by poor catalytic performance of electrodes and weak adhesion of catalysts to electrodes. This review focuses on the key challenges and recent …

An Electrochemiluminescence-Based Arsenic (Iii) Sensor Using Luminol On Screen-Printed Gold Electrodes, Harmesa Harmesa, Isnaini Rahmawati, Andrea Fiorani, Yasuaki Einaga, Eny Kusrini, A’An Johan Wahyudi, Asep Saefumillah, Tribidasari A Ivandini

Journal of Electrochemistry

Electrochemiluminescence (ECL) of luminol has been studied on a screen-printed gold electrode for a simple and sensitive detection of arsenic ions (As(III)). Cyclic voltammetry (CV) was applied as the proposed technique to study luminol’s electrochemical behavior and to evaluate the arsenic’s effect in the ECL system, while hydrogen peroxide (H₂O₂) served as a co-reactant to enhance luminol’s light emission under alkaline conditions. To achieve optimal electrode performance, key parameters including pH, scan rate, and the concentrations of H₂O₂ and luminol were carefully optimized. The presence of As(III) induced a quenching effect on the …

Control Of Pore Nucleation And Rearrangement Kinetics During Aluminium Anodizing In Phosphoric Acid Electrolyte, Ilya V. Roslyakov, Nikita A. Shirin, Dmitry M. Tsymbarenko, Sergei N. Pavlov, Sergey E. Kushnir, Nikolay V. Lyskov, Kirill S. Napolskii

Journal of Electrochemistry

Anodic aluminium oxide (AAO) porous films with an interpore distance of several hundred nanometers are of great interest due to their unique interaction with visible and near-infrared light, and high thermal stability up to 1500 °C. These porous films are prepared by aluminium anodizing at high voltages in weak acids, leading to a slow kinetics of initial stages of porous structure formation. Here, we propose an approach to accelerate AAO formation in electrolytes based on weak acids such as phosphoric acid. Aluminium foils, pre-patterned using first anodizing under different conditions and subsequent selective dissolution of a sacrificial AAO layer, were …

Triphenylmethane-Derived Levelers For High-Speed Redistribution Layer Copper Electroplating Of Tailored Surface Morphologies, Zi-Hao Song, Wei-Bin Wang, Xiao-Hui Liu, Xiao-Min Han, Yi Zhou, Rui Huang, Yan-Xia Jiang, Zhe Li, Xiao-Wei Liu, Mei-Ling Xiao, Hong-Gang Liao, Wei-Lin Xu, Rong Sun

Journal of Electrochemistry

Redistribution Layer (RDL), composed of layered dielectrics and electroplated copper materials, is a basic structure to rearrange numerous I/O pads on the chip surface in wafer-level advanced packaging. As the key chemicals in electrolyte baths, electroplating additives have undergone continuous development to meet the industrial needs for high-speed and fine-line/fine-pitch applications. Meanwhile, the intricate relationships between additive chemical structures and electroplated copper properties are yet to be well understood. In this work, a pair of triphenylmethane-based dye molecules, i.e., gentian violet (GV) and methyl green (MG), was comparatively investigated as levelers for high-speed RDL copper electroplating. Compared to GV, significantly …

Iron-Involved Orr Electrocatalysts Under The Lens Of In-Situ/Operando Mössbauer Spectroscopy, Sumbal Farid, Jun-Hu Wang

Journal of Electrochemistry

Exploring cost-effective and efficient catalysts for oxygen reduction reaction (ORR) poses a significant challenge, especially in the pursuit of alternatives to precious metals like platinum. Significant advancements have driven electrochemists to develop efficient ORR catalysts using abundant materials, particularly iron (Fe)-based, known for their exceptional performance in ORR. While the crucial function of Fe in boosting ORR catalytic activity is recognized, the connection between material attributes and catalytic performance remains enigmatic. Understanding the dynamic processes involved in oxygen electrocatalysis is paramount for designing precious-metals-free ORR electrocatalysts. Mössbauer spectroscopy stands out as a powerful technique for deciphering the structural characteristics of …

The Ntp Anode For Aqueous Sodium Ion Batteries: Recent Advances And Future Perspectives, Ming-Li Wang, Xue-Ying Su, Zheng-Xiang Shan, Shu-Zhe Yang, Heng-Rui Guo, Hao Luo, Dong-Liang Chao

Journal of Electrochemistry

Aqueous sodium-ion batteries (ASIBs) have attracted great attention in aqueous batteries due to their merit of high safety. However, the constrained work potential and insufficient chemical stability of anode materials in aqueous electrolytes hinder the large-scale application of ASIBs. Sodium titanium phosphate, NaTi₂(PO₄)₃ (NTP), is considered one of the most promising anode materials for ASIBs due to its excellent electrochemical performance and tunable structure. Recently, great achievements have been made in the development of NTP, however, a comprehensive review of existing studies is still lacking. This article firstly introduces the basic properties of NTP and …

Development Status And Existing Problems Of Ion-Solvation Membranes For Electrolysis Of Water, Zheng-Yuan Zhou, Yu-Tao Sun, Zheng-Bang Liu, Chuan-Zheng Wang, Yong-Nan Zhou, Xi Luo, Tian-Chi Zhou, Jin-Li Qiao

Journal of Electrochemistry

Ion-solvaing membranes (ISMs) have received extensive attention in recent years as a key component in electrochemical energy conversion and storage devices. This article provides an overview of structural composition, performance advantages, research progress, ion conduction mechanism and existing issues of ISMs, primarily classifying them according to the matrix structure. A detailed analysis of performance enhancement methods, key performance indicators of ISMs and performance influencing factors is also presented. The article contributes to further optimizing the design and application of ion-solvation membranes, providing theoretical support for the development of fields such as hydrogen production through electrolysis of water and electrochemical energy …

Carbon Supported Octahedral Ptni Nanoparticles (Oct-Ptni/C) As A Cathode Catalyst For Proton Exchange Membrane Fuel Cells (Pemfcs) With Improved Activity And Durability, Zi-Wei Feng, Hai-Zhong Chen, Xiao Duan, Ling Tang, Yun-Kun Zhao, Long Huang

Journal of Electrochemistry

Proton exchange membrane fuel cells (PEMFCs) are considered as a promising renewable power source. However, the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied performance mainly due to the sluggish oxygen reduction reaction (ORR) kinetics even on state-of-the-art Pt catalyst. Octahedral PtNi nanoparticles (oct-PtNi NPs) with excellent ORR activity in a half-cell have been widely studied, while their performance in membrane electrode assembly (MEA) has much less reported. Herein, we investigated the MEA performance using the carbon supported oct-PtNi NPs (oct-PtNi/C) as the cathode catalyst. Under the mild acid washing condition, the surface …

Applications For The Quasi-Atomic Orbital And Constrained Density Functional Theory Methods On Catalytic Reactions, Alvaro David Loaiza Orduz

LSU Doctoral Dissertations

Selective activation of C–O, C–H, and C–C bonds underpins biomass upgrading, alkane functionalization, and CO₂ conversion. Despite their importance, the electronic factors governing catalytic performance remain incompletely understood, and many industrial processes still rely on empirical trends or material-specific observations. This dissertation addresses this gap by applying density functional theory (DFT), thermodynamic decomposition, and electronic-structure analysis to identify unifying principles of reactivity across transition-metal phosphides, vanadate oxides, copper-based electrocatalysts, and mixed IrO₂–RuO₂ layers. This work examines how charge transfer, orbital localization, and ligand-induced perturbations control reaction pathways in diverse catalytic systems. C–O bond scission in 2-methyltetrahydrofuran (MTHF) and methanol was …

Continuous Sorption Of Ionic Dyes Onto Nanoporous Faujasite Zeolite And The Regeneration Of The Adsorbent, Frederick O. Oshomogho, Miracle Aisosa Omorogieva

BAU Journal - Science and Technology

This study evaluates the efficiency of synthesized faujasite zeolite in the continuous removal of methylene blue from water and tests the reusability of the regenerated adsorbent. Faujasite Zeolite was synthesized from locally available aluminosilicate clay in Edo State using standard methods documented in the literature. XRF analysis affirmed the elemental composition, showing high levels of silica and alumina, which increased its adsorption capacity. SEM images depicted a crystal-clear structure with an octahedral shape and visible micro-pores on the surface. TGA showed effective thermal stability below 300 ºC, with a 10% weight loss between 28.59 ºC and 300 ºC. BET analysis …

Elucidating Structure–Reactivity Relationships In Ni-Catalyzed Co2 Methanation, Majed Alam Abir

Graduate Theses, Dissertations, and Problem Reports (ETD)

The catalytic hydrogenation of carbon dioxide (CO₂) to methane represents a promising strategy for carbon utilization and renewable energy storage within power-to-gas systems. When coupled with hydrogen derived from renewable electricity, CO₂ methanation enables the conversion of intermittent energy sources into storable and transportable chemical fuels compatible with existing natural gas infrastructure. Nickel-based catalysts have emerged as leading candidates for this reaction due to their high activity towards CO₂ methanation, abundance, and cost. However, the performance and long-term stability of Ni catalysts are strongly influenced by catalyst support properties, Ni nanoparticle size, and promoter effect, and …

Rubric Enhanced Assessment Of Coursework And Teaching (React): Using Portfolios And Rubrics In An Engineering Classroom To Refocus From Grades To Learning, Nathan Lee Galinsky

2026 Scholarly Teaching Conference: Poster Session Papers

The goal of using rubrics in an engineering classroom is to make grading clearer for students and to enhance the learning efforts. Point based grading of work leaves students looking for the correct numerical solution or choice without thinking about their assumptions, process, or approximations. A rubric dissects grading to include the entire solution procedure emphasizing key steps in a solution procedure. Students also don’t have to wonder where partial credit will be focused or what emphasis a solution will be graded on when using rubrics. By combining the rubric assessment techniques with portfolios, students will be empowered to feel …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Material Degradation And Analysis Of N-Doped Graphene/Mof Nanocatalysts For Orr In Electrochemical Energy Systems, Niladri Talukder

Dissertations

The development of advanced electrochemical energy conversion and storage systems is crucial for achieving sustainable energy security. As alternatives to precious metal-based catalysts in electrochemical systems, especially for the oxygen reduction reaction (ORR), Nitrogen-doped Graphene with Metal-organic Frameworks (N-G/MOF) nanocatalysts have shown exceptional promise in recent years. This research advances the understanding of N-G/MOF nanocatalysts by systematically examining their structural features, degradation traits, correlated performance losses, and other aspects related to catalytic activities.

First, nitrogen-doped graphene (N-G) nanocatalysts were thoroughly investigated, resolving their physical properties, the influence of synthesis parameters, molecular-level material structures, and chemical and electronic structural details of …

Two Members Of The Editorial Board Of Journal Electrochemistry, Kai Wu Elected As An Academician Of The Chinese Academy Of Engineering And Yi Cui A Foreign Academician Of The Chinese Academy Of Sciences, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Electrochemical Characterization And Modulation Of Biological Processes, Yue-Qi Li, Wei-Hua Huang, De-Chen Jiang, Bao-Hong Liu, Bin Su, Yang Tian, Jing-Juan Xu, Ping Yu, Feng Zhao, Huang-Xian Ju, Jing-Hong Li

Journal of Electrochemistry

Electrochemical processes lie at the core of biological function, governing energy transduction, metabolic flux, and molecular signaling. Recent advances in electrochemical science now allow these processes to be probed and controlled with unprecedented spatial, temporal, and chemical resolution. In this review, we present an integrated framework that progresses from fundamental mechanisms to analytical technologies and functional modulation. We begin by outlining electron transfer pathways in mitochondrial respiration, microbial extracellular electron transfer, and DNA- and protein-based charge conduction, followed by the principles of photon-electron conversion in photosynthesis and the central role of redox equilibrium in coordinating cellular responses. We then highlight …

A Novel Electrolyte Pyridine Additive For Enhancing Cycle Life Of Lithium-Ion Batteries, Peng-Cheng Wang, Ding-Chang Li, Jun-Tao Li, Guang-Bo Lu, Shi-Wen Wang

Journal of Electrochemistry

Lithium-ion (Li-ion) battery using a graphite (Gr.) anode and a lithium iron phosphate (LiFePO₄, LFP) cathode (Gr.||LFP) has been widespread in energy storage. To match the warranty period of energy storage systems, the lifespan of this kind of Li-ion battery, not only under room temperature but also under relatively high temperature, is critical. Exploration of functional electrolyte additive provides an efficient approach to address this issue. This study reports the usage of pyridine (Py) as a new electrolyte functional additive for Gr.||LFP. In the first cycle, it was found that Py can be reduced before ethylene carbonate and …

Journal Of Electrochemistry Officially Indexed By Leading Oa Databases Oarl And Coaj, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Feature Column Of Journal Of Electrochemistry Nominated For 2025 Top 10 Famous Columns Of Fujian Provincial Newspapers And Periodicals, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Development Of A Digestion Procedure Using Fe2+ Ions For Electrochemical Detection Of Mno2 Particles In Drinking Water, Kayla Elliott, Sarah Jane Payne, Zhe She

Journal of Electrochemistry

Developing methods for detection contaminants in drinking water is essential to ensuring that safe and acceptable quality drinking water is delivered to consumers. While manganese (Mn) was previously known only as a mere aesthetic issue, recent epidemiological data has shown to have negative neurological effects on humans, especially on children, prompting new health-based guidelines by Health Canada and the World Health Organization. In drinking water, Mn exists predominantly as Mn(II) and Mn(IV), and is regulated based on total Mn levels. Interestingly, measurement of Mn particulate using electroanalytical methods has not yet been reported in the literature. Herein, a digestion procedure …

Biocompatible And Antibacterial Pcl-Tio2@Ag/Γ-Cd Mof Nanocomposite Coating For Corrosion Resistance Of Magnesium Alloy In Simulated Body Fluid, Sara Dehghan-Chenar, Hamid R. Zare, Zahra Mohammadpour, Maryam Sadat Mirbagheri-Firoozabad

Journal of Electrochemistry

Magnesium alloys are promising candidates for bio-implant applications due to their biodegradability and biocompatibility. However, their rapid corrosion remains a critical limitation. This study presents the development of a multifunctional nanocomposite coating designed to enhance the corrosion resistance and antibacterial properties of magnesium alloy implants. The coating comprised γ-cyclodextrin metal-organic frameworks (γ-CD MOFs) decorated with TiO₂@Ag core-shell nanoparticles, embedded in a polycaprolactone (PCL) matrix. Immersion tests in a simulated body fluid (SBF) revealed an initially higher corrosion rate for the PCL-TiO₂@Ag/γ-CD MOF coating compared to the coating without TiO₂@Ag nanoparticles; however, it demonstrated significant …

Development Trends And Priority Research Fields Of Electrochemical Discipline In The 15th Five Year Plan Period, Lin Zhuang, Wen-Bin Cai, Heng-Xing Ji, Qing Li, Gong-Wei Wang, Sen Xin, Qing Zhao, Fang-Yi Cheng, Yu-Guo Guo, Lan-Qun Mao, Yang Tian, Fei Wu, Li-Min Zhang, Yan Xiang, Jin-Song Hu, Rui Cao, Li Xiao, Hua-Bing Tao, Wei Xing, Dong-Ping Zhan, Hong-Gang Liao, Mei-Ling Xiao, Bin Ren, Zhang-Quan Peng, Rui Wen, Xiang Wang, Yue-Feng Song, Hou-Fu Lv, Bao-Yu Xia, Guo-Xiong Wang, Jun Cheng, Zhi-Pan Liu, Min Zhou, Bing Huang, Cun-Pu Li, Yu-Qin Zou, Shuang-Yin Wang, Hai-Bo Lin, Zi-Dong Wei

Journal of Electrochemistry

In fulfillment of the national science-and-technology development agenda, the Department of Chemical Sciences of the National Natural Science Foundation of China (NSFC) convened the Strategic Symposium on the Fifteenth Five-Year (2026–2030) Development Plan for Electrochemistry held in Xiamen on 29 August, 2025—the culminating year of the Fourteenth Five-Year (2021–2025) Development Plan. More than forty leading experts in the field of electrochemistry participated with spanning nine thematic fronts: Interfacial Electrocatalysis, Interfacial Electrochemistry for Energy Storage, Bioelectrochemistry, Electrochemistry of Hydrogen Energy, Electrochemical Micro-/Nano-Manufacturing, Operando Electrochemical Characterization, Electro-Thermal Coupling Catalysis, Theoretical and Computational Electrochemistry, and Electrochemical Synthesis. The forum assembled China’s foremost electrochemical …

Control Of Ferroelectric And Dielectric Properties Of Undoped, Fe, And Nb-Doped Single-Crystalline (001) Oriented Pb (Zr0.5ti0.5) O3 Thin Films, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

While several factors that influence the properties of ferroelectric devices have been extensively studied in bulk ceramics and polycrystalline thin films, limited is known about the same on single crystalline thin films which have great potential in memory and energy applications. This knowledge gap is largely due to the limited availability of substrates with lattice parameters suitable for supporting high-quality epitaxial growth. In this study, undoped, Fe-doped, and Nb-doped (001)-oriented Pb(Zr₀.₅Ti₀.₅)O₃ thin films were deposited using pulsed laser deposition, each with a SrRuO₃ bottom electrode and a PrScO₃ substrate. The doping concentration used is 1% for both Fe and Nb. …

Condition Optimization For The Synthesis Of Castor Oil Templated Mesoporous Silica, Godlisten Namwel Shao

Tanzania Journal of Engineering and Technology (TJET)

The present work provides suitable conditions for the synthesis of mesoporous materials with improved porosity using an optimization technique. The proposed preparation method involves forming final products by varying the amount of castor oil, media, and template removal. The obtained samples were examined by TGA, XRD, DRIFT and nitrogen physisorption studies. It was observed that the porosity of the obtained samples was dependent on the conditions under which the materials were synthesized. All synthesized materials showed the Type IV adsorption-desorption isotherm features of mesoporous, regardless of the conditions utilized during the synthesis. The sample synthesized using 2.5 g of a …