Catalysis and Reaction Engineering Commons^™

Properties Of (Cd, Zn)S Films Deposited By Dc Co-Sputtering, Lwitiko P. Mwakyusa

Tanzania Journal of Engineering and Technology (TJET)

CdS thin film is commonly used as a buffer layer in most thin film solar cells. However, the buffer layer with less absorption in the visible region of the solar spectrum as well as that which provides perfect lattice matching with the absorbers is required. The incorporation of Zn in the CdS films can affect the structural and optical properties of the buffer layer. In this work, films of CdS and (Cd,Zn)S films were deposited by DC sputtering utilizing CdS and Zn targets. The concentration of Zn in the CdS was varied by changing the sputtering power of the Zn …

Synthesis, Characterisation And Catalytic Evaluation Of Castor Oil-Templated Mesoporous Sulfated Solid Acid Catalysts For Esterification Reaction, Steven Nyandoro Pr

Tanzania Journal of Engineering and Technology (TJET)

In bio-refinery and other catalytic reactions, heterogeneous catalysts confer advantage over homogenous catalysts due to minimized recovery and separation costs. However, templating surfactant and solid support for the synthesis of heterogeneous catalysts ought to consider their cheap sources and environmentally friendliness for their sustainable use. Thus, with the vision to make the process significantly benign, in the present work, solid acids were synthesised from renewable sources (castor oil as surfactant and rice husk as the source of silica). The synthesised castor oil-templated mesoporous sulfonic acid modified catalysts (SO3H-MTS and SO3H-MT-RHS) were characterised and evaluated for catalytic esterification of acetic acid …

Optimization Of Pulsed Laser Deposition Parameters For Single Crystalline (011) Oriented Tetragonal Pzt Thin Films, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

Recent advances in nanotechnology applications require the processing of high-quality thin films. A systematic study of the optimization of Pulsed deposition parameters for (110) oriented tetragonal PZT thin films is reported in this work. Prior to film deposition, a highly tetragonal Pb(Zr0.5, Ti0.95) or PZT 05/95 was selected to be deposited on (110) oriented Strontium titanate, SrTiO3 substrate, STO(110) to insure small compressive misfit strain. Unlike SRO, the LSOM bottom electrode was then successfully grown at 620 °C, 1.0 J/cm2 and a target-substrate distance of 3.9 cm. Finally, deposition parameters of PZT were progressively optimized through monitoring film morphological changes. …

Determination Of Effectiveness Of Combined Biological And Physicochemical Treatment Of Vinasse, Mahir Mohammed Said

Tanzania Journal of Engineering and Technology (TJET)

Combined biological and Physicochemical treatment method was used to treat vinasse using microorganisms (Aspergillus niger (fungi) and Bacillus subtilis (bacteria)), coagulants (aluminium sulphate (Al2(SO4)3) and iron III chlorides (FeCl3)) and followed by filtration. Three factors; coagulant type, type of microorganism and coagulant concentration was analysed using full factorial design (2n) with replication, on their percentage removal of Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD), Total Suspended Solids (TSS) and turbidity. Pareto chart and regression analysis with a 95% confidence interval (5% significant level) were used to analyse the results using MINITAB 22 (current version). Initially, the vinasse had (COD), …

Synthesis And Characterization Of Hybrid Catalysts For Fischer-Tropsch Jet Fuel Production, Jack M. Steinagel

Honors College Theses

Climate change is a major issue that our world is facing today. Finding renewable options for current infrastructure is paramount to solving this issue. Fischer-Tropsch synthesis of syngas from gasified biomass can produce renewable fuels that can be used in current conventional combustion engines. In order to make this process more industrially viable, a higher selectivity towards the desired range of liquid hydrocarbon products must be achieved. A novel way to do this is to introduce a catalyst to the Fischer-Tropsch reaction. The catalyst’s physical and chemical properties can promote chain growth of specific hydrocarbons. For the purpose of this …

Synthesis Of Novel Chiral Phosphorothioic Acid Organocatalysts And Application To Synthetic Methodology, Parsa Azaei

Undergraduate Research Symposium Posters

Much research efforts have been centered towards the synthesis of novel Bronsted acid catalysts. These organocatalyst enable synthesis of natural products, pharmaceuticals, and bioactive small molecules under toxic-metal-free conditions by donating their protons, while not being consumed in the reaction. Chiral phosphorothioic acid have significant potential as novel organocatalysts due to their high modifiability of chirality and acidity under environmentally friendly conditions; however, synthesis of these organocatalysts are far and in between. Therefore, our research aimed to i) synthesize novel phosphorothioic acid organocatalysts and ii) to apply these novel catalysts toward new methodology development.

Elucidation Of Active Site And Mechanism Of Metal Catalysts Supported In Nu-1000, Hafeera Shabbir

All Dissertations

Advances in extraction of shale oil and gas has increased the production of geographically stranded natural gas (primarily consisting of methane (C1) and ethane (C2)) that is burned on site. A potential utilization strategy for shale gas is to convert it into fuel range hydrocarbons by catalytic dehydrogenation followed by oligomerization by direct efficient catalysts. This work focuses on understanding metal cation catalysts supported on metal-organic framework (MOF) NU-1000 that will actively and selectively do this transformation under mild reaction conditions, while remaining stable to deactivation (via metal agglomeration or sintering). I built computational models validated by experimental methods to …

Insight Into The Effects Of Cation Disorder And Surface Chemical Residues On The Initial Coulombic Efficiency Of Layered Oxide Cathode, Jin-Li Liu, Han-Feng Wu, Zhi-Bei Liu, Ying-Qiang Wu, Li Wang, Feng-Li Bei, Xiang-Ming He

Journal of Electrochemistry

Lithium layered oxide LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) is one of the most promising cathode materials in high-energy lithium-ion batteries for electric vehicles. However, one drawback for NCM622 is that its initial coulombic efficiency (ICE) is only about 87%, which is at least 6% lower than that of LiCoO₂ or LiFePO₄. In this work, we investigated the effects of surface chemical residues (e.g., LiOH and Li₂CO₃) and Li/Ni cation disorder resulted during the sintering on the ICE. We found that the ICE of the as-prepared samples could be boosted …

Electrochemical Syntheses Of Nanomaterials And Small Molecules For Electrolytic Hydrogen Production, Jia-Qi Wei, Xiao-Dong Chen, Shu-Zhou Li

Journal of Electrochemistry

Hydrogen is a clean, efficient, renewable energy resource and the most promising alternative to fossil fuels for future carbon-neutral energy supply. Therefore, sustainable hydrogen production is highly attractive and urgently demanded, especially via water electrolysis that has clean, abundant precursors and zero emission. However, current water electrolysis is hindered by the sluggish kinetics and low cost/energy efficiency of both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this regard, electrochemical synthesis offers prospects to raise the efficiency and benefit of water electrolysis by fabricating advanced electrocatalysts and providing more efficient/value-adding co-electrolysis alternatives. It is an eco-friendly and facile …

Alkaline Seawater Electrolysis At Industrial Level:Recent Progress And Perspective, Tao Zhang, Yi-Pu Liu, Qi-Tong Ye, Hong-Jin Fan

Journal of Electrochemistry

Industrial hydrogen generation through water splitting, powered by renewable energy such as solar, wind and marine, paves a potential way for energy and environment sustainability. However, state-of-the-art electrolysis using high purity water as hydrogen source at an industrial level would bring about crisis of freshwater resource. Seawater splitting provides a practical path to solve potable water shortage, but still faces great challenges for large-scale industrial operation. Here we summarize recent developments in seawater splitting, covering general mechanisms, design criteria for electrodes, and industrial electrolyzer for direct seawater splitting. Multi-objective optimization methods to address the key challenges of active sites, reaction …

A Self-Supported Ru-Cu3P Catalyst Toward Alkaline Hydrogen Evolution, Zi-Xuan Wan, Chao-Hui Wang, Xiong-Wu Kang

Journal of Electrochemistry

Transition metal phosphide (TMP) is a kind of effective catalysts toward hydrogen evolution reaction (HER) in alkaline electrolytes. However, the performance of TMP catalysts is strongly limited by water splitting. In this work, we developed a method to prepare a copper foam (CF) supported Ru-doped Cu₃P catalyst (Ru-Cu₃P/CF) by a consecutive growth of Cu(OH)₂ nanoarrays, soaking in RuCl₃ solution and phosphorization. A large surface area was obtained by the self-supported catalysts with the appropriative Ru doping. As an excellent HER catalyst, it exhibited a low overpotential of 95.6 mV at a current density of …

Catalytic Effect Of Disordered Ru-O Configurations For Electrochemical Hydrogen Evolution, Xue Sun, Ya-Jie Song, Ren-Long Li, Jia-Jun Wang

Journal of Electrochemistry

Phase engineering is considered as an effective method for modulating the electronic structure and catalytic activity of catalysts. The disordered conformation of amorphous materials allows flexible reforming of the surface electronic structure, showing their attractiveness as catalysts for hydrogen evolution reaction (HER). Herein, we designed and developed an amorphous ruthenium dioxide (a-RuO₂) catalyst with a disordered Ru-O configuration. The conformational relationship between Ru-O ordering and HER performance is established by combining advanced electron microscopic techniques with detailed electrochemical tests. Specifically, the disordered Ru-O coordination significantly enhanced the HER catalytic activity in both acidic and alkaline media, ultimately leading …

Alkaline Water Electrolysis For Efficient Hydrogen Production, Wen-Fu Xie, Ming-Fei Shao

Journal of Electrochemistry

Hydrogen production from water electrolysis is a sustainable and environmentally benign strategy in comparison with fossil fuel-based hydrogen. However, this promising technique suffers from the high energy consumption and unsatisfactory cost due to the sluggish kinetics of both half reaction and inferior stability of electrocatalysts. To address this challenge, herein, we present a timely and comprehensive review on advances in alkaline water electrolysis that is already commercialized for large scale hydrogen production. The design principles and strategies with aiming to promote the performance of hydrogen generation are discussed from the view of electrocatalyst, electrode, reaction and system. The challenges and …

Élimination Des Vapeurs Toxiques Par Oxydation : Développement De Procédures D'Évaluation Des Systèmes De Purification De L'Air Des Conduits De Ventilation, Chang-Seo Lee, Fariborz Haghighat, Alireza Haghighat Mamaghani, Zahra Shayegan, Ali Bahloul, Mélanie Huard, Lexuan Zhong, Mitra Bahr

Rapports de recherche scientifique

L'exposition à des composés organiques volatils (COV) dans les lieux de travail peut avoir des effets aigus, notamment sous forme d'irritation de la peau, des yeux, de la bouche et du nez. Certains produits peuvent également provoquer des effets chroniques, comme l'asthme et le cancer. La prévention de tels effets nocifs sur la santé des travailleurs par l'adoption et la mise en œuvre de mesures visant à en éliminer ou à tout le moins réduire le risque s'avère importante. Parmi les approches développées à ce jour pour réduire l'exposition aux polluants de l'air intérieur – dont les COV –, la …

Removal Of Toxic Vapors By Oxidation: Development Of Laboratory Test Procedures For In-Duct Air Cleaning Systems, Chang-Seo Lee, Fariborz Haghighat, Alireza Haghighat Mamaghani, Zahra Shayegan, Ali Bahloul, Mélanie Huard, Lexuan Zhong, Mitra Bahr

Rapports de recherche scientifique

L'exposition à des composés organiques volatils (COV) dans les lieux de travail peut avoir des effets aigus, notamment sous forme d'irritation de la peau, des yeux, de la bouche et du nez. Certains produits peuvent également provoquer des effets chroniques, comme l'asthme et le cancer. La prévention de tels effets nocifs sur la santé des travailleurs par l'adoption et la mise en œuvre de mesures visant à en éliminer ou à tout le moins réduire le risque s'avère importante. Parmi les approches développées à ce jour pour réduire l'exposition aux polluants de l'air intérieur – dont les COV –, la …

Preface To Special Issue On Water Electrolysis For Hydrogen Production, Li Li, Jin-Song Hu, Zi-Dong Wei

Journal of Electrochemistry

No abstract provided.

Recent Development Of Low Iridium Electrocatalysts Toward Efficient Water Oxidation, Jing Ni, Zhao-Ping Shi, Xian Wang, Yi-Bo Wang, Hong-Xiang Wu, Chang-Peng Liu, Jun-Jie Ge, Wei Xing

Journal of Electrochemistry

Developing high-performance and low-cost electrocatalysts for oxygen evolution reaction (OER) is the key to implementing polymer electrolyte membrane water electrolyzer (PEMWE) for hydrogen production. To date, iridium (Ir) is the state-of-the-art OER catalyst, but still suffers from the insufficient activity and scarce earth abundance, which results in high cost both in stack and electricity. Design low-Ir catalysts with enhanced activity and stability that can match the requirements of high current and long-term operation in PEMWE is thus highly desired, which necessitate a deep understanding of acidic OER mechanisms, unique insights of material design strategies, and reliable performance evaluation norm, especially …

The Rapid Preparation Of Efficient Mofeco-Based Bifunctional Electrocatalysts Via Joule Heating For Overall Water Splitting, Ao Zhou, Wei-Jian Guo, Yue-Qing Wang, Jin-Tao Zhang

Journal of Electrochemistry

Water electrolysis is an available way to obtain green hydrogen. The development of highly efficient electrocatalysts is a current research hotspot for water splitting, but it remains challenging. Herein, we demonstrate the synthesis of a robust bifunctional multi-metal electrocatalysts toward water splitting via the rapid Joule-heating conversion of metal precursors. The composition and morphology were well regulated via altering the ratio of metal precursors. In particular, the trimetal MoC/FeO/CoO/carbon cloth (CC) electrode revealed the outstanding bifunctional electrocatalytic performance due to the unique composition and large electrochemical active surface area. Typically, the MoC/FeO/CoO/CC catalyst needed low overpotentials of 121 and 268 …

Perovskite-Type Water Oxidation Electrocatalysts, Xiao Liang, Ke-Xin Zhang, Yu-Cheng Shen, Ke Sun, Lei Shi, Hui Chen, Ke-Yan Zheng, Xiao-Xin Zou

Journal of Electrochemistry

The development of energy conversion/storage technologies can achieve the reliable and stable renewable energy supply, and bring us a sustainable future. As the core half-reaction of many energy-related systems, water oxidation is the bottleneck due to its sluggish kinetics of the four-concerted proton-electron transfer (CPET) process. This necessitates the exploitation of low cost, highly active and stable water oxidation electrocatalysts. Perovskite-type oxides possess diverse crystal structures, flexible compositions and unique electronic properties, enabling them ideal material platform for the optimization of catalytic performance. In this review, we provide a comprehensive summary for the crystal structures, electronic structures and synthetic methods …

Surface Structure Engineering Of Feni-Based Pre-Catalyst For Oxygen Evolution Reaction: A Mini Review, Jia-Xin Li, Li-Gang Feng

Journal of Electrochemistry

Nitrite, a widespread raw material, is harmful to human health for long-term consumption. At present, the detection methods of nitrite mainly include chemical analysis, fluorescence, ultraviolet spectrophotometry and chromatography. These methods have ideal sensitivity and selectivity, but also have some characteristics: cumbersome operation, expensive equipment and professional personnel. Therefore, the development of a simple and sensitive nitrite assay is of great significance. In this paper, the Au/rGO/FeOOH composite materials, which revealed good synergistic catalytic performance among the three elements in the composite, were prepared by simple hydrothermal method and reduction method for the first time with large specific surface area …

A Co Porphyrin With Electron-Withdrawing And Hydrophilic Substituents For Improved Electrocatalytic Oxygen Reduction, Hong-Bo Guo, Ya-Ni Wang, Kai Guo, Hai-Tao Lei, Zuo-Zhong Liang, Xue-Peng Zhang, Rui Cao

Journal of Electrochemistry

Understanding factors that influence the catalyst activity for oxygen reduction reaction (ORR) is essential for the rational design of efficient ORR catalysts. Regulating catalyst electronic structure is commonly used to fine-tune electrocatalytic ORR activity. However, modifying the hydrophilicity of catalysts has been rarely reported to improve ORR, which happens at the liquid/gas/solid interface. Herein, we report on two Co porphyrins, namely, NO₂-CoP (Co complex of 5,10,15,20-tetrakis(4-nitrophenyl)porphyrin) and 5F-CoP (Co complex of 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin), and their electrocatalytic ORR features. By simultaneously controlling the electronic structure and hydrophilic property of the meso-substituents, the NO₂-CoP showed higher electrocatalytic activity than …

Low-Crystallinity And Heterostructured Aupt-Ru@Cnts As Highly Efficient Multifunctional Electrocatalyst, Tuan-Jie Gan, Jian-Ping Wu, Shi Liu, Wen-Jun Ou, Ling Bin, Xiong-Wu Kang

Journal of Electrochemistry

The catalytic activity of the catalysts is strongly dependent on the structure of the catalysts, and the exploration of their correlation and structure-controlled synthesis of the high-performance catalysts are always at the central. Currently, platinum (Pt) is the optimum catalyst for hydrogen evolution reaction (HER), oxygen reduction reaction (ORR) and alcohol oxidation reaction, while ruthenium (Ru) behaves as the champion catalyst for oxygen evolution reaction (OER) during water splitting. Preparing alloy catalysts with these precious metals can modulate the catalytic activity of these catalysts from the perspective of strain effect, ensemble effect and ligand effect. Here, we developed a strategy …

Facile One-Step Solid-State Synthesis Of Ni-Rich Layered Oxide Cathodes For Lithium-Ion Batteries, Jing-Yue Wang, Rui Wang, Shi-Qi Wang, Li-Fan Wang, Chun Zhan

Journal of Electrochemistry

Nickel-rich layered oxide is one of the dominate cathode materials in the lithium ion batteries, due to its high specific energy density meeting the range requirement of the electric vehicles. Typically, the commercial Ni-rich layered oxides are synthesized from co-precipitated precursors, while precision control is required in the co-precipitation process to ensure the atomic level mixing of the cations such as Ni, Co and Mn, et.al. In this work, a one-step solid-state method was successfully applied to synthesize the Ni-rich layered oxide materials with ultra-high Ni content. By choosing the nickel hydroxides as the precursor with layered structure similar to …

Modeling Solvent Extraction Of Lignin From Hardwoods, Su Pan

McKelvey School of Engineering Graduate Student Theses & Dissertations

This study interprets the observed behavior of solvent extraction of lignin from hardwoods by adapting the framework of the FLASHCHAIN theory (Niksa and Kerstein, 1991; Niksa, 2017). A constitution submodel specifies distributions of molecular weight and reactive sites for native lignin. The model simulates delignification as depolymerization of lignin macromolecules into fragments small enough to be soluble. This process competes with intrachain condensation that consumes labile bridges without forming new fragments, and with recombination that forms larger chains and inhibits further depolymerization. After the soluble fragments are transported from the particle into the bulk solvent, all chemistry continues as long …

Wind Tunnel Modeling Of Jack Rabbit Ii Mock Urban Environment Gas Concentration Measurements, Sami S. Fares

Graduate Theses and Dissertations

The 2015 Jack Rabbit (JR) II field trials were conducted to improve understanding of the denser-than-air dispersion of chlorine in an urban environment. The field study involved five large-scale, outdoor release trials of chlorine in a mock urban environment (MUE) at Dugway Proving Ground (DPG). Various instrumentation was deployed, including JazTM Ultraviolet-Visible (UV-Vis) point sensors capable of measuring gas-phase chlorine concentration throughout the mock urban array.

The Chemical Hazards Research Center (CHRC) was tasked by the Chemical Security Analysis Center (CSAC) with the Mock Urban Wind Tunnel (MUWT) program to study the 2015 JR II Trials at wind tunnel scale. …

Performance And Fouling During Bioreactor Harvesting, Da Zhang

Graduate Theses and Dissertations

Tangential flow filtration has many advantages for bioreactor harvesting as the permeate could be introduced directly to the subsequent capture step, the process is easy to scale up, and fouling of the filter is limited by the cross flow. However, membrane fouling has limited its widespread use. This is particularly problematic given the high cell densities encountered today. Here a reverse asymmetric commercial membrane, BioOptimal™ MF-SL (Asahi Kasei), where the more open surface faces the feed stream, and the tighter barrier layer faces the permeate stream, has been investigated for bioreactor harvesting. The open surface contains pores up to 40 …

Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa

Chemical Engineering

In this study, the formic acid electro-oxidation reaction (FAEOR) was catalyzed on a Pd-Au co-electrodeposited binary catalyst. The kinetics of FAEOR were intensively impacted by changing the Pd2+:Au3+ molar ratio in the deposition medium. The Pd1-Au1 catalyst (for which the Pd2+:Au3+ molar ratio was 1:1) acquired the highest activity with a peak current density for the direct FAEOR (Ip) of 4.14 mA cm−2 (ca. 13- times higher than that (ca. 0.33 mA cm−2) of the pristine Pd1-Au0 catalyst). It also retained the highest stability that was denoted in fulfilling ca. 0.292 mA cm−2 (ca. 19-times higher than 0.015 …

Designing The Electrode Geometry And Electrolyte To Enhance The Product Selectivity And Activity In Carbon Dioxide Electroreduction, Samaneh Sharifi Golru

Dissertations, Theses, and Capstone Projects

Excessive utilization of the fossil fuels due to the rapid growth of the global population has resulted in a dramatic increase in the carbon dioxide (CO₂) level in the atmosphere which is the main reason for global warming and climate change. Therefore, green technologies are in high demand to develop carbon-neutral energy cycles. In this regard, CO₂ electroreduction (CO2ER) has been proposed as a promising approach for CO₂ utilization. CO2ER can mitigate the CO₂ level in the atmosphere as well as produce value-added chemicals and fuels at ambient conditions. Despite the benefits of CO_{2 …}

Electrochemical Synthesis Of Acetylpyrazine, Lin Mao, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Acetylpyrazine is naturally presented in hazelnuts, peanuts, and sesame seeds. As an important food additive, it is widely used in baked foods, meat, sesame and tobacco. At the same time, acetylpyrazine is also an important pharmaceutical intermediate, which is used in the syntheses of anti-tuberculosis drugs, anti-tumor, anti-malaria, anti-viral, antibacterial and treatments of epilepsy, pain and Parkinson’s drugs. At present, the synthesis methods of acetylpyrazine include oxidation method, multi-step method and Grignard reagent method, which have the disadvantages of low yield, cumbersome process, severe reaction conditions and high cost. In this study, acetylation of pyrazine was used to synthesize acetylpyrazine …

Electrocatalytic "Volcano-Type" Effect Of Nano-Tio2 (A)/(R) Phase Content In Pt/Tio2-CnX Catalyst, Ai-Lin Cui, Yang Bai, Hong-Ying Yu, Hui-Min Meng

Journal of Electrochemistry

The relationship between the electrochemical activity of fuel cell catalysts and Pt particle size, as well as the catalyst support and co-catalyst is still unclear. In this work, FESEM, XRD, BET, TEM and CV techniques were adopted to investigate the effects of TiO₂ anatase (A)/rutile (R) phases content on the electrochemical activity of Pt electrocatalyst. The results showed that the anatase-rutile phase transformation occurred during the heat treatment of TiO₂ at 700 ~ 900 ^oC accompanied by the growth of two-phase crystalline size, and anatase was completely transformed into rutile at 900 ^oC. TEM results revealed …