Biomedical Engineering and Bioengineering Commons^™

Integrated Optical Probes For Confocal Scanning Imaging And Adjustable Coherent-Gated Dynamic Sensing, Yonglin Huang

Graduate Studies Theses and Dissertations 2026

Optics and photonics have been one of the most important sciences and technologies that impact modern human life in a big way. For example, fiber-optics for communications and artificial intelligence. Optical probes are critical components for optical imaging and optical sensing technologies that have been actively researched and developed in the past decades. Advanced fiber-optic sensor probes with smaller size, better performance, lower noise, higher photon efficiency, rapid sensing time, and lower cost are needed in many applications, such as nanoscale material science, chemistry, and biomedical fields, etc.  In this project, new fiber-optic sensor probe technologies and integrated micro-optic devices …

Mathematical Modeling And Characterization Of A Variable Stiffness Ankle-Foot-Orthosis, David E.L. Richards

Graduate Studies Theses and Dissertations 2026

Conventional ankle–foot orthoses (AFOs) typically employ static stiffness profiles that do not replicate the dynamic quasi-stiffness of the human ankle during gait. Variable stiffness mechanisms (VSMs) offer a promising alternative solution for gait pathologies, such as foot drop and post-stroke hemiparesis; however, their implementation is limited by the lack of accurate mathematical models capable of predicting force and stiffness characteristics. The objective of this thesis is to develop and validate comprehensive mathematical models describing the kinematics and kinetics of a novel variable stiffness ankle–foot orthosis (VS-AFO). This study derives governing equations to characterize how mechanical adjustments influence the force transmission …

Evaluating The Brain-Muscle Connectivity Of Cyclic Ankle Pedaling Movement In A Clinical Setting, Matthew K. Shanosky

Graduate Studies Theses and Dissertations 2026

Clinical neurorehabilitation requires objective biomarkers to accurately detect and monitor neuromotor impairments. While traditional metrics are favored for their efficiency and minimal equipment demands, they typically rely on subjective observation and lack physiological resolution. High-resolution electrophysiological technologies, such as electroencephalography (EEG) and electromyography (EMG), offer objective insights into nervous system dynamics; however, prolonged data acquisition times have hindered their translation into frontline clinics. To bridge this translational gap, this study developed a time-efficient experimental paradigm designed for rapid clinical deployment. Healthy participants completed two initial resting baseline trials before performing an externally paced, dynamic, cyclic ankle movement task utilizing simulation …

Volumetric Fluorescence Microscopy For High-Throughput And High-Sensitivity Imaging: From Single Molecules To Tissues, Le-Mei Wang

Graduate Studies Theses and Dissertations 2026

Fluorescence microscopy is an indispensable tool in the biological sciences, enabling researchers to investigate intricate subcellular structures, particularly for volumetric studies. However, conventional optical microscopy for volumetric imaging remains fundamentally constrained by imaging speed and throughput. To bypass traditional serial z-scanning, we introduce an axially scan-free method using a phase layer cake to modulate the system's point spread function. This approach projects volumetric information onto a 2D plane in a single shot, offering high flexibility in tuning axial depth alongside simultaneous multicolor imaging with high spatial resolution and sensitivity. This dissertation divides these technical advancements into cellular and tissue imaging …

A Reconstruction Method For The Anisotropic Electrical Conductivity In A Hybrid Planar Inverse Problem, Athanasios Dimitriadis

Graduate Studies Theses and Dissertations 2026

Some single-physics medical imaging methods fail to reliably discriminate benign from malignant biological tissue. In partial response, a new class of inverse problems employ multi-physics phenomena, coupling methods of high resolution with methods of high contrast. In this thesis we are concerned with one such problem in which an anisotropic electrical conductivity is to be recovered from some internal knowledge of the current density field generated by maintaining a fixed boundary voltage. This internal data is obtained by the method of Current Density Impedance Imaging (CDII), which combines Maxwell's equations with Magnetic Resonance Imaging (MRI) measurements. The anisotropy class is …

Microgravity-Induced Alterations In Left Atrial Hemodynamics And Thrombogenic Risk: Insights From Healthy And Atrial Fibrillation Models, Grace M. Hoeppner

Dissertations, Master's Theses and Master's Reports

Background: Microgravity exposure alters cardiovascular loading, yet its impact on left atrial flow dynamics and thrombotic risk remains poorly understood. This study investigates how spaceflight-relevant microgravity-induced changes in cardiac outflow affect left atrial hemodynamics in healthy individuals and patients with atrial fibrillation.

Methods: Patient-specific left atrial models were generated for three healthy individuals and three AF patients. Computational fluid dynamics (CFD) simulations were performed using each patient’s baseline mitral outflow waveform and two modified waveforms representing short- and long-duration post-flight cardiac loading changes derived from echocardiographic observations. Hemodynamic metrics included left atrial velocity, time averaged wall shear stress, oscillatory shear …

Wip: Arduino-Based Pbl To Foster Entrepreneurial Mindset, Nathan Q. Holland, Vukica M. Jovanovic

Engineering Technology Faculty Publications

This work-in-progress paper examines a semester-long project-based learning initiative begun in an introductory engineering course during the Fall 2025 semester. The project aims to enhance students' hands-on experience by integrating information literacy, the engineering design process (EDP), and an entrepreneurial mindset (EM) [1]. The objective is to boost student confidence in teamwork, technical problem-solving, and application of skills, preparing them for future courses in their discipline. Students in this introduction to engineering course received an Arduino Uno R3 Controller board kit and additional sensors. They were tasked to develop a device addressing engineering in the medicine challenge of their choosing. …

Modeling Healthcare Data With Logistic Quantile And Uniform-Based Mixture Polynomial Distributions, Mohan D. Pant, Aditya Chakraborty, Jovanna A. Tracz

Epidemiology, Biostatistics, & Environmental Health Faculty Publications

Continuous healthcare data often deviate from normality, which can substantially increase the risk of making invalid inferences, given that many inferential statistical procedures rely on normality assumption. To obviate this issue, we propose a new family of non-normal distributions based on a linear combination of the quantile functions of standard logistic and uniform (0, 1) distributions. This new family of non-normal distributions is studied within three different methods: L-moments, conventional moments, and percentiles. Its performance is compared among the three methods in the context of parameter estimation and data modeling. The results of Monte Carlo simulation and bootstrapping techniques indicate …

Multisystem Predictors Of Dynamic Gait Stability Across Fall Risk In Older Adults, Ashwini Kulkarni, Neda Moghim, Ross Gore, Soumya Banerjee, Christopher K. Rhea, Brittany Samulski

Rehabilitation Sciences Faculty Publications

Gait stability arises from interactions between physiological, cognitive, and psychological systems, yet these domains are often assessed in isolation. This study examined multisystem predictors of anteroposterior margin of stability during walking (MoSAP) in community-dwelling older adults. Of 340 participants, 143 were retained after data quality screening (105 females; age: 70.8 ± 7.8 years). Participants completed the Physiological Profile Assessment (PPA), cognitive testing using Montreal Cognitive Assessment (MoCA), fear-of-falling evaluations using Modified Falls Efficacy Scale (MFES) and a biomechanical gait assessment during preferred and fast speeds. Participants were stratified into four PPA-based fall-risk groups: low, mild, moderate, and high risk. MoSAP …

Effect Of Local Steel Slag Incorporation On The Mechanical Properties Of Concrete, Ahmed Safaa Tariq Karmah, Wissam Khadum Alsaraj, Luma A. Zghair

Al-Esraa University College Journal for Engineering Sciences

The increasing interest in the production of concrete through the utilization of inexpensive materials has caused a rise in the number of studies concerning the use of materials with cementitious properties, such as Silica Fume, Slag, Fly Ash and other pozzolanic materials. Moreover, the increasing amounts of Steel Slag being produced from local factories that are being deposited without an available method of disposal provides an opportunity to harness the Slag in the production of an inexpensive, and possibly better concrete. Slag has been used as both an addition and substitution of the cement and fine aggregate. The mixtures included …

Decoding Climate Change: A Comprehensive Statistical Insight Into Temperature Anomalies In Iraq And Its Neighboring Countries, Jameel T. Al-Naffakha, Mohammed R. Al-Qassabanda, Israa Jafar

Al-Esraa University College Journal for Engineering Sciences

This study applies advanced statistical techniques, including the Mann-Kendall Trend Test and ARIMA forecasting, to validate and predict temperature anomalies across Iraq and its neighboring countries (2014–2024). Findings confirm a statistically significant warming trend (p < 0.00000005) across all nations, with Syria (1.02°C) and Turkey (0.97°C) experiencing the highest anomalies. GIS-based spatial analysis highlights regional disparities, identifying climate-vulnerable zones. The persistent rise in temperature anomalies correlates with worsening water scarcity, desertification, and extreme weather events, including prolonged droughts and heatwaves. Iraq’s peak anomaly (1.48°C) has exacerbated heat stress, agricultural decline, and reduced river inflows, while Kuwait and Saudi Arabia struggle to maintain critical infrastructure under record-breaking temperatures exceeding 50°C. These climate shifts pose severe risks to water availability, food security, and energy demand, necessitating urgent policy interventions. Key recommendations include enhanced water resource management, climate-adaptive agriculture, and renewable energy expansion. If left unaddressed, rising temperatures could destabilize the region, increasing socio-economic vulnerabilities and escalating resource conflicts. This study underscores the need for cross-border collaboration and sustainable adaptation policies to mitigate the long-term impacts of climate change in the Middle East.

Optimal Power Flow Control In The Iraqi Power Grid Using Artificial Intelligence Algorithms For Carbon Emission Reduction, Mohammed Shakir Juber

Al-Esraa University College Journal for Engineering Sciences

Iraq’s power sector remains in a protracted and severe crisis characterized by a significant mismatch between supply and demand, high levels of losses during transmission and distribution, as well as an increasing challenge to the resources base being largely unfavourably. These inefficiencies impose heavy costs on the national economy in excess of 40 billion annually and they also reinforce greenhouse gas emissions, and exacerbate environmental issues. To deal with these problems, we proposed in this paper that a new hybrid AI tool should be developed for the solution of multi-objective optimization problem based on purpose Genetic Algorithm (GA) merger with …

Applying Machine Learning Techniques For Early Detection Of Cyber Attacks On Iot Devices, Noor Adnan Allamy

Al-Esraa University College Journal for Engineering Sciences

This research designs, implements, and evaluates a machine learning-based framework for the early detection of cyber attacks targeting Internet of Things (IoT) devices, with a specific focus on the context and challenges present in Iraq. The study conducts a comparative analysis of three supervised learning algorithms—Support Vector Machine (SVM), Random Forest (RF), and Deep Neural Networks (DNN)—using a combination of benchmark datasets (NSL-KDD, CIC-IDS-2017, Bot-IoT) and a synthesized dataset adapted to simulate the Iraqi threat landscape. Key performance metrics, including accuracy, precision, recall, and F1-score, were used for evaluation. The proposed Random Forest model demonstrated superior performance, achieving an accuracy …

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R² > 0.997). The surrogate …

Hybrid Experimental–Computational Study On The Energy Absorption Of Graphene Nanoplatelet-Reinforced Sandwich Structures, Hamdan Yousif Hamdan

Al-Esraa University College Journal for Engineering Sciences

Background: Sandwich composites are widely used in aerospace, automotive, and marine applications because of their lightweight, stiffness, and strength, but they remain prone to out-of-plane impacts and barely visible impact damage (BVID). Graphene Nanoplatelets (GNPs) have shown strong potential to improve fracture toughness and impact resistance. However, hybrid experimental–computational studies applying such reinforcement are still lacking in developing contexts like Iraq, where practical and accessible solutions are essential. Aims: The study investigates the effect of GNP reinforcement on the low-velocity impact behavior and energy absorption of glass fiber/epoxy sandwich panels with PVC foam and balsa wood cores. Objectives include fabricating …

Effect Of Thick Closed Walls Of West And South Elevations Of Iraqi Middle And South Territory Housing Building On Reducing Energy Use, Abeer Qasim Jbur, Shaimaa M. Hamza, Mayyadah Lutfi Abdulwahhab

Al-Esraa University College Journal for Engineering Sciences

Thermal insulation is one of the most important factors in achieving sustainability, increasing efficiency, and reducing energy consumption, but modern insulation materials are expensive, in addition to their availability. Therefore, through our research, we resorted to investigating the issue of reducing thermal load in buildings through the use of thick-walled facades in the southern and western facades, where we studied a building with two windows with windows on the southern and western facades and another without these windows and with thick walls, for two locations, the first in central Iraq, which is the city of Baghdad, and the second in …

The Impact Of Ethyl Levulinate Additive On Diesel Engine Performance And Emissions: An Experimental Study, Maha Ali Ghadbaan

Al-Esraa University College Journal for Engineering Sciences

This study explores the environmental and operational impact of adding Ethyl Levulinate—a biodegradable ester derived from biomass—to diesel fuel. A fuel blend known as B5El6 (comprising 5% biodiesel and 6% Ethyl Levulinate) was prepared and tested experimentally using a single-cylinder diesel engine operating at a constant speed of 1500 rpm under full load conditions. Performance metrics and emission data were recorded, and a Life Cycle Assessment (LCA) was conducted using the IMPACT2002+ methodology.

The results revealed that B5El6 significantly reduced greenhouse gas emissions (100 kg CO2 eq) and improved ecosystem quality. However, it presented challenges in terms of human health …

The Role Of The Scenario In Formulating The Contemporary Architectural Text, Rounaq Arif Mohsin, Abbas Ali Hamza, Bashar Shamil Alkhafaji

Al-Esraa University College Journal for Engineering Sciences

In order to create an integrated architectural text, which is a complicated art that blends beauty and practical elements, a rigorous design procedure is necessary. In this situation, the scenario’s role becomes crucial in developing the current architectural text and directing architectural approaches. In order to better understand how the scenario influences the design process and the interactions between various architectural aspects, this project intends to explore and analyze the impact of the scenario in developing and refining architectural text formulation approaches.

The study looks at the idea of a scenario and how it has been used in architecture, as …

Investigation Of Some Physical Properties Of Slurry Infiltrated Fibrous Concrete (Sifcon) Under Different Curing Times, Rand Kh. Mahmoud, Mohmmed Juad Khadhim, Fayq Hasan Jabbar

Al-Esraa University College Journal for Engineering Sciences

This research studied the effects of different types fibers (Basalt, Carbon and Basalt-Carbon hybrid mix) and curing ages (7, 14, 28 and 56 days) on some physical properties of - Slurry infiltrated fibrous concrete (SIFCON). Density, ultrasonic pulse velocity UPV, Poisson’s ratio and water absorption were measured for the experimental study with 30% cement replacement by Class F fly ash to increase sustainability. It was found that properties were significantly affected by the type and dosage of fiber admixture. The UPV was enhanced by basalt fibers and the absorption reduced up to an optimal range of 3–5% after which agglomeration …

Mechanical And Durability Properties Of Cement Panels Reinforced With Hybrid And Pva Fibers, Shukran H. Faraj, Mohammed J. Kadhim

Al-Esraa University College Journal for Engineering Sciences

This study examines the synergistic effects of hybrid fibers (HF) and polyvinyl alcohol (PVA) fibers on the structural and thermal properties of silica-fume cement panels. Scanning electron microscopy (SEM) was employed to examine mortar mixtures with varying fiber content to assess their enhancement of microstructure. We conducted several experiments on compressive, flexural, and splitting tensile strength, in addition to water absorption and thermal conductivity. The results indicate that 1% HF exhibits superior mechanical qualities, with a compressive strength of 46.89 MPa, a flexural strength of 8.56 MPa, and a reduced thermal conductivity of 0.83 W/m•K. PVA fibers at 2% enhance …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …

Numerical Modeling And Experimental Validation Of A High-Temperature Latent Heat Thermal Energy Storage System Using Metallic Phase Change Materials For Concentrated Solar Power Applications, Fouad Hashim Sharhan

Al-Esraa University College Journal for Engineering Sciences

To ensure reliable performance for the power-block of CSP plants, high power density and near-isothermal discharge must be achieved. A robust means of achieving this is through thermal energy storage (TES). High temperature latent heat storage (LHS) with phase change materials (PCMs) can serve these purposes, however the conventional salts used in PCMs typically suffer from low thermal conductivity that limits power density and increases energy storage charging/discharging times. This manuscript investigates ways to address these limitations using high temperature metallic phase change materials (MPCMs) while also developing a validated numerical framework to aid in their design. To this end, …

Thermal Performance Evaluation Of Solar Cooling Systems For Educational Facilities In Baghdad, Yasser Alawi Mohammed Attia Al-Jubouri

Al-Esraa University College Journal for Engineering Sciences

Schools in Baghdad also suffer from poor thermal comfort, which is a common problem in high-temperature and low-humidity arid climates such as that of the city, where using cooling devices leads to a large energy demand and overloads on the national power grid. Such study offers a thorough assessment of the thermal performance of solar-based cooling systems in an efficient manner to be suitable for educational buildings in Baghdad. The analysis is centred on a solar thermal cooling system with absorption as the heat interaction medium, and an experimental characterisation and mathematical simulation itself are performed. A pilot installation, consisting …

Uji Kelayakan Teknis Dan Performa Auvest: Rompi Pendingin Otomatis Berbasis Wearable Thermoelectric Cooler Untuk Mitigasi Risiko Heat Stress, Muchammad Adam Wildan, Amelia Avril Rayhana, Nadia Hanifan Nabila, Bian Shabri Putri Irwanto

National Journal of Occupational Health and Safety

Heat stress is a serious threat to construction workers that can reduce productivity and even threaten lives. Existing cooling vest innovations still have limitations, such as weight, manual systems, and the risk of leakage. This study aims to analyze the effectiveness of the Automatic Vest (AUVEST), an automatic cooling vest based on Wearable Thermoelectric Cooler and the Internet of Things (IoT), in preventing the risk of heat stress. The method used is experimental with trials on one construction worker in indoor and outdoor environments. AUVEST is equipped with temperature sensors (DS18B20, TMP102) and humidity (DHT11), whose data is processed by …

Curing Duration Optimization To Reduce Shrinkage Cracking In One-Part Alkali-Activated Slag Concrete, A. Sadrmomtazi, H. Zanganeh

Journal of Sustainable Construction Materials and Technologies

The consequences of inadequate curing on one-part alkali-activated slag concrete (O-AAS) performance relative to ordinary Portland cement concrete (OPCC) have been investigated in this research. Prior to exposure to unsaturated conditions, samples underwent initial moist curing for durations ranging from 24 hours to one year. The testing program included compressive strength evaluation, chloride ion transport analysis, and measurement of free and restrained shrinkage. In addition, cylindrical cores were extracted from concrete columns to assess internal strength and chloride penetration resistance. Under unsaturated exposure, O-AAS exhibited a strength-aging phenomenon, with up to a 37% decrease in compressive strength over 360 days, …

Laboratory Investigation And Numerical Modelling Effect Of Carbon Nanotubes On Hot Mix Asphalt Permanent Displacement, Sepehr Saedi, Auwal Usman Nadada

Journal of Sustainable Construction Materials and Technologies

One of the primary causes of asphalt pavement deterioration is rutting; in contrast, one of the most effective methods to address this type of damage is the use of additives and quality evaluation during the design stages. In this research, laboratory testing and modeling using Abaqus software were employed to validate the laboratory results and predict and assess the potential for rutting. Carbon nanotubes (CNTs) were selected as an additive due to their exceptional mechanical properties and molecular interactions with bitumen. These nanotubes were used to modify the bitumen for the preparation of laboratory samples. The laboratory results from the …

Influence Of Early Microwave Curing On Performance Of Slag-Based Geopolymer Mortars, Ahmet Taşdemı̇R, Abdulkadir Çevı̇K

Journal of Sustainable Construction Materials and Technologies

In this article, an experimental study was conducted to examine the effect of curing time and microwave power on the compressive strength of early microwave-cured slag based geopolymers. Geopolymers have the potential to serve as an environmentally friendly substitute for cement-based building materials, and the use of microwave curing to geopolymers holds the promise of substantial strength improvement. Different microwave curing energies (300 - 800 Watts) were utilized at varying durations (10 - 60 minutes) on demoulded mortar specimens after one day. After that, compressive strength tests were conducted on both the cured and uncured specimens at three different ages: …

Towards Computational Methods In Medical Data Analysis: From Speech And Text To Imaging, Kristin Qi

Graduate Doctoral Dissertations

Early detection of cognitive decline and efficient medical image analysis remain critical challenges in healthcare. Traditional clinical assessments are infrequent and resource-intensive, while everyday speech data and unlabeled medical images remain largely unexploited. This dissertation develops computational methods integrating machine learning and artificial intelligence across speech, text, and imaging modalities to address challenges in medical data processing. For cognitive monitoring, this work first introduces methods using voice assistant systems to collect longitudinal speech data in home environments, demonstrating that incorporating historical session patterns significantly enhances detection of mild cognitive impairment. Building on this foundation, a framework combining large language model-driven …