Engineering Commons^™

Wireless Personal Area Network-Based Assistance For The Visually Impaired, Kurt Matthew Peters

Electrical & Computer Engineering Theses & Dissertations

In this dissertation, a system allowing a visually impaired person to interact with his environment is developed using modern, low-power wireless communications techniques. With recent advances in wireless sensor networks, open-source operating systems, and embedded processing technology, low-cost devices have become practically feasible as a personal notification system for impaired people. Additionally, text-to-speech capabilities can now be employed without special application specific integrated circuits (ASICs), allowing low-cost, general-purpose processors to fill a niche that once required expensive semiconductors.

The system takes advantage of 802.15.4 and media access control (MAC) protocols offered by the open source operating system TinyOS. Important characteristics …

Comparison Of Electrically Mediated And Liposome-Complexed Plasmid Dna Delivery To The Skin, Loree C. Heller, Mark J. Jaroszeski, Domenico Coppola, Richard Heller

Bioelectrics Publications

BACKGROUND: Electroporation is an established technique for enhancing plasmid delivery to many tissues in vivo, including the skin. We have previously demonstrated efficient delivery of plasmid DNA to the skin utilizing a custom-built four-plate electrode. The experiments described here further evaluate cutaneous plasmid delivery using in vivo electroporation. Plasmid expression levels are compared to those after liposome mediated delivery.

METHODS: Enhanced electrically-mediated delivery, and less extensively, liposome complexed delivery, of a plasmid encoding the reporter luciferase was tested in rodent skin. Expression kinetics and tissue damage were explored as well as testing in a second rodent model.

RESULTS: Experiments …

Modeling And Stability Analysis Of Nonlinear Sampled-Data Systems With Embedded Recovery Algorithms, Heber Herencia-Zapana

Electrical & Computer Engineering Theses & Dissertations

Computer control systems for safety critical systems are designed to be fault tolerant and reliable, however, soft errors triggered by harsh environments can affect the performance of these control systems. The soft errors of interest which occur randomly, are nondestructive and introduce a failure that lasts a random duration. To minimize the effect of these errors, safety critical systems with error recovery mechanisms are being investigated. The main goals of this dissertation are to develop modeling and analysis tools for sampled-data control systems that are implemented with such error recovery mechanisms. First, the mathematical model and the well-posedness of the …

Surface Pre-Treatments And Fabrication Of Highly Ordered Anodic Aluminum Oxide Nanopores At Room Temperature, Sampath Chennuri

Electrical & Computer Engineering Theses & Dissertations

The object of this work is to develop a novel approach to fabricate model membranes of well-defined and well aligned nanostructured materials in a robust environment. The main focus is on electrochemical synthesis, involving anodic oxidation of high purity aluminum sheets to form porous oxide films. Alumina films were prepared by anodizing highly pure aluminum (99.999%) in acidic electrolytes. Anodization parameters (current density, temperature, applied voltage, anodization time and electrolyte concentration) were selected with respect to the electrolyte used.

The primary challenge in nanotechnology is the creation of nanometer-scaled objects with as narrow a size distribution as possible for a …

Biomarker Identification For Prostate Cancer Using An Efficient Feature Selection Algorithm, Vamsi Krishnam Raju Mantena

Electrical & Computer Engineering Theses & Dissertations

In recent years, there has been an increased interest in using protein mass spectrometry to identify biomarkers that discriminate diseased from healthy individuals. A biomarker is a characteristic that is objectively measured and evaluated as an indicator of normal biological processes, pathological processes, or pharmacological responses to a therapeutic intervention. Identifying biomarkers will be an important step towards disease characterization and patient management. One challenge of biomarker identification is how to handle the high dimensional mass spectral data. In this thesis, we applied an efficient feature selection algorithm to mass spectrometry data obtained from prostate tissue samples to identify prostate …

Geo-Rectification Of Aerial Images For Detecting Changes In Terrain, Diana Vincent

Electrical & Computer Engineering Theses & Dissertations

With increasing terrorist attacks around the world, detection of hidden bombs like IEDs (Improvised Explosive devices) has become very important. The main aim of this thesis is to develop an automatic change detection system to detect changes in terrain. It is mainly used in military applications for protection of military convoys. In order to detect the presence of IED's, an Unmanned Aerial Vehicle (UAV) is flown over a proposed convoy route to develop a baseline scene. Prior to the launch of the convoy the UA V is flown again over the same route to detect any significant scene changes that …

Simulation Based Six-Sigma Design For Service Industry, Shantanu Dhananjay Ghate

Mechanical & Aerospace Engineering Theses & Dissertations

The main purpose of this thesis was to develop the dental clinic design using six-sigma principles. Simulation software called Process Model^TM was used to build a primary layout of the clinic. Once the basic design was built, statistical analysis method like D.O.E (design of experiment) was used to generate the data based on different combinations of design parameters viz. number of hygienists, number of x-ray machines and waiting room capacity. These data were further analyzed using Contrast-Effect method, ANOVA and Regression Analysis. In order to incorporate the impact of random factors, Taguchi's methodology was applied. This lead to the …

Modeling Geographic Population Dispersion Utilizing Geospatial Information System Environment Agents In An Agent Based Model, Karl D. Liebert

Computational Modeling & Simulation Engineering Theses & Dissertations

New capabilities in agent based model (ABM) environments are opening the door to the creation of ABM that may incorporate high-quality, real world environment data in the form of Geospatial Information System (GIS) files . In the past, GJS environments were only possible through extensive software development efforts focused on specific model applications.

This thesis explores the value and issues of using GIS data to provide an ABM environment. It examines the ability of ABM development environments (DE) to support GIS environment data. The selected ABM DE is then used to model population behavior in an environment defined by authoritative …

Aerial And Satellite Image Processing Applications, Srinivas K. Jakkula

Electrical & Computer Engineering Theses & Dissertations

Aerial and satellite images are used extensively in many trip and mapping software packages, such as Google Earth etc. Aerial images differ significantly due to the variations in atmospheric clarity, atmospheric layer density, humidity, temperature, and season under which the aerial images are captured. Among the issues in effective utilization of aerial images, color tone discrepancy is the inconsistency in brightness, saturation, or color balance between images representing adjacent areas, causing adjacent areas appear significantly different that would otherwise be similar. Aenal images are also routinely used as ground textures to simulate Earth surface and 3D features on Earth in …

Mesoscale Dispersive Flux In The Lower Reaches Of The Elizabeth River Estuary, Byron Danrich Tracy

Civil & Environmental Engineering Theses & Dissertations

Congress has mandated under Section 303(d) of the Clean Water Act that Total Maximum Daily Loads (TMDL's) be established for impaired water bodies to further identify and regulate their waste assimilative capacity. To establish a TMDL, the sources of waste loading or pollutants must be identified, and a method of determining how each should be limited or removed must be developed. Using a water quality model is a typical method for determining these limits, and since new or changed limits will likely impact local businesses and government budgets, the model must be accurate. For most tidal systems larger than small …

A Systematic Study On Structural And Optical Properties In Conjugated Polymer Photovoltaic Devices, Sri Sabarinadh Sunkavalli

Electrical & Computer Engineering Theses & Dissertations

Conjugated polymer/fullerene based solar cells represent an exciting alternative to inorganic ones because of their low production costs, flexibility and low weight. At present, commercialization of organic photovoltaic (OPV) cells is limited due to their relatively low efficiency in comparison to silicon ones. In order to understand the operation of OPV cells and to increase their efficiency, more information about the structure of the absorber layer is needed. In particular, the connection between structure and properties of the absorber layer is of great importance. Performance of bulk heterojunction organic solar cells based on poly (3-hexylthiophene) as donor and a soluble …

Parameter Estimation Of The Arterial System, James Charles Carter Ii

Mechanical & Aerospace Engineering Theses & Dissertations

There are a number of disorders that originate from or involve faulty operation of the cardiovascular system. Diseases such as atherosclerosis, diabetes and hypertension can have a debilitating effect on blood flow. This makes the tools for simulating the effects of such diseases on blood flow important. Measures, such as pulse wave velocity, that are generated by models of the cardiovascular system can be important indicators of cardiac health. Although physically measurable, obtaining some parameters comes with a high cost and discomfort to the patient. Models can provide an assessment of many important parameters. The purpose of this project was …

Virtualization Of Physical Experiments Using Real-Time Data Generation From A Computational Fluid Dynamics Code, Kaustubh A. Dharwadkar

Mechanical & Aerospace Engineering Theses & Dissertations

This work presents a methodology for mapping physical experiments into real-time, web-based virtual experiments. The four broad elements included in the physical-to-virtual experiment transformation methodology are: (a) computer solution of conservation equations of mass and momentum to generate velocity and pressure (virtual) data that serve as the foundation for recreating the physical phenomenon in the virtual domain; (b) use of virtual pressure and velocity sensing devices to generate signals or readings from computed virtual data that can be observed and read on a computer screen; (c) use of visualization software such as Macromedia FLASH to create a highly interactive environment …

Development Of Comprehensive Agility Measurement Tool, Ameya Surendra Erande

Mechanical & Aerospace Engineering Theses & Dissertations

This research focuses on the development of Comprehensive Agility Measurement Tool. Industry independent use of such a tool would help enterprises benchmark their success in achieving agility.

Continuous improvement and modernization of manufacturing techniques around the globe have brought many mutations in manufacturing industry. Customer expectations and demands are behind the introduction of new paradigms such as mass production, lean, mass customization, agile and now internet-based manufacturing. Though lean was first coined with respect to manufacturing industry, soon it became applicable in all the industries based on its waste reduction and productivity improvement techniques. Lacking international competitiveness of US manufacturing …

A Markov Based Model For Maintenance And Repair Of Equipment, Deepa Jaishankar

Mechanical & Aerospace Engineering Theses & Dissertations

The failure repair process of a continuously operating device is studied in this research. Different cases that incorporate modeling of equipment deterioration, inspection, and maintenance for optimal maintenance policy are proposed. Markov processes are used to determine state probabilities, and the optimal value of the mean time to preventive maintenance is determined by maximizing the availability of the equipment with respect to the mean time preventive maintenance. The approach uses models that assume that equipment can fail due to both deterioration and random failures. Preventive maintenance can be performed from each working state to avoid deterioration failure. Economic effects are …

Experimental Study Of The Frequency Response Of A Hot Film Anemometer, Ashish Tamhane

Mechanical & Aerospace Engineering Theses & Dissertations

This endeavor was motivated by the need to accurately quantify wind tunnel turbulence, a component of flow quality. The use of spheres and cones to find a turbulence correction factor has been mentioned in the literature but these methods are indirect approaches. To measure the amplitude and spectra of the velocity fluctuations, the hot wire anemometer is the only reliable instrument. A fiber-film sensor, which is similar in operation but with more mechanical rigidity, may be preferred over a hot wire owing to its robustness. In this work, the frequency response characteristics of the hot fiber-film sensor are studied.

The …

Engineering Management Framework In Support Of Modeling & Simulation Application For Domain Specific Procurement, Thomas Guy Litwin

Engineering Management & Systems Engineering Theses & Dissertations

A strategic process is desirable for project-based organizations in order for them to be efficient and effective when developing Modeling & Simulation (M&S) systems. This thesis proposes an overarching process that combines traditional M&S and Engineering Management methodologies in a new framework to support M&S organizations during the procurement process.

This thesis proposes both a Strategic Project Management Process (SPMP) and a systems engineering process for M&S federation development projects. The systems engineering process utilizes the artifacts of Model Driven Architecture (MDA) to support building M&S federations driven by operational requirements. Detailed research of this systems engineering process revealed a …

Education Enhancement Using Visualization And Simulation Tools For Basic Circuit Theory Concepts, Jariwala Rajvi Prakashchandra

Electrical & Computer Engineering Theses & Dissertations

New generation web-technologies and supporting development tools have prompted opportunities for developing new methods of teaching and learning. Web-based visualization and simulation modules developed for ODU's ECE201 Circuit Theory course are presented in this thesis. Visualization and simulation methodology is used to make learning process more interactive and effective. Macromedia FLASH software, which has the extensive graphical animation capabilities, is used to develop visualization modules. Lab VIEW is a leading graphical development tool for science and engineering with a built-in functionality for simulation, data acquisition, instrument control, measurement analysis and data presentation. These capabilities are utilized to develop web-based simulation …

The Development Of Genetic Algorithm For The Prediction Of Ship Motion From Wave Radar Data, Sumanth Tirumala Vangipuram

Electrical & Computer Engineering Theses & Dissertations

Genetic Algorithms represent a model of natural process based on the Darwinian principle of evolution. Genetic algorithms are used to solve optimization problems by generating a set of possible solutions and determining which of these solutions most closely match the desired result. The Genetic Algorithm (GA) initially generates a random set of possible solutions, or populations, determines which members of the population are most desirable, and calculates better solutions by implementing genetic operations such as reproduction, cloning, and mutation. Problems where the evaluation of a solution is computationally simple enable the GA to search a vast search space. One of …

Using Timed-Release Cryptography To Mitigate Preservation Risk Of Embargo Periods, Rabia Haq

Computer Science Theses & Dissertations

This research defines Time-Locked Embargo, a framework designed to mitigate the Preservation Risk Interval: the preservation risk associated with embargoed scholarly material. Due to temporary access restrictions, embargoed data cannot be distributed freely and thus preserved via data refreshing during the embargo time interval. A solution to mitigate the risk of data loss has been developed by suggesting a data dissemination framework that allows data refreshing of encrypted instances of embargoed content in an open, unrestricted scholarly community. This framework has been developed by exploiting implementations of existing technologies to"time-lock" data using Timed-Release Cryptology (TRC) so that it can be …

An Agent-Based Combat Simulation Framework In Support Of Effect-Based And Net-Centric Evaluation, Robert Joseph Bowen

Computational Modeling & Simulation Engineering Theses & Dissertations

The use of information technologies (IT) and information networks has proliferated in industry as a method to achieve competitive advantage. The U.S. Military and its allies, in recent years, have employed IT to improve the way they conduct operations, speed decision making, and increase the span of control of commanders. This has resulted in a fundamental shift in the way military commanders employ combat units today. These (Information Age) forces no longer have to be able to see each other or even communicate directly in order to synchronize maneuvers. Dispersion is now favored over mass, relying on the IT network …

Computational Solution Of Tail Buffet Response And Active Flow Control, Kaushik Laxmikant Joshi

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, numerical simulation of the multidisciplinary method for prediction and control of vortex induced tail buffeting is studied using delta wing-single tail configuration. Flow conditions are chosen such that wing vortex cores experience vortex breakdown and the resulting wake flow impinges on the vertical tail. The aero/structure problem is solved sequentially using three sets of equations on a multi-block grid structure. To obtain aerodynamic loading on the tail, the fluid flow around the wing-tail assembly is computed by time-accurately solving unsteady, laminar, compressible Navier-Stokes equations using an implicit, upwind, flux-difference splitting finite volume scheme. Then the aeroelastic equations …

Performance Of Adaptive Wireless Systems With Feedback, Sirisha Koduri

Electrical & Computer Engineering Theses & Dissertations

Future generations of wireless systems will employ versatile transmitters and receivers based on software defined radios that are capable of adapting in response to changes in the operating environment to meet the specified quality of service requirements. In adaptive wireless systems, transmitters use feedback from the receiver to update characteristics of the transmitted signal to changing patterns of interference. In this thesis, the performance of transmitter adaptation algorithms with limited feedback and the system performance as a function in which the interference information is quantized for transmission over the feedback channel are analyzed. The results of this thesis were presented …

Medical Image Modeling And Processing, Ramu Pedada

Electrical & Computer Engineering Theses & Dissertations

During the last few decades of the twentieth century, medical imaging has been playing a prominent role in many fields of biomedical research and clinical practice. Image modalities such as x-rays, computed tomography (CT), and magnetic resonance images (MRI) have all been valuable additions to the radiologist's arsenal of imaging tools. Medical images assure quality diagnosis and patient safety by gathering valuable information without invading the human body. Apart from clinical diagnosis, medical images are used as tools for education where they are used for training individuals before operating on a patient. Many medical educators tum to simulation based training …

Immersive Active Learning For Virtual Laboratory Experiments, Swetha Punnandla

Electrical & Computer Engineering Theses & Dissertations

A Laboratory Immersive Interactive Virtual Environment (LIIVE) for scientific experiments is developed using MAY A and Virtools. The LIIVE is used as a pre-lab practice module to familiarize the students with the equipment, procedure and parameters involved in a laboratory experiment. The system has been assessed for its effectiveness as a learning tool by administering a project and a quiz to each participant and conducting a structured observation during the actual laboratory experiment on the real equipment. The learning effect achieved by the LIIVE is compared to the learning effects obtained by the less immersive 2D virtual environment and the …

Image Pre-Processing Techniques For Hazard Detection In Poor Visibility Conditions, Girish Singh Rajput

Electrical & Computer Engineering Theses & Dissertations

Runway incursion is a persistent problem that has resulted in some of the most devastating accidents in aviation history. With ever increasing air traffic and more passengers, runway safety is of utmost priority to the Federal Aviation Administration (FAA) and other agencies concerned with aviation. As the issue of aviation safety becomes increasingly important, developing a consistent application that detects runway incursions in various visibility conditions is crucial for the aviation industry. This thesis presents a novel method for detecting runway hazards in poor visibility conditions using image processing techniques. The first step is to obtain images of a runway …

Robust Edge-Detection Algorithm For Runway Edge Detection, Swathi Tandra

Electrical & Computer Engineering Theses & Dissertations

Fog and other such weather conditions hamper the visibility of runway surfaces and any obstacles present on the runway, creating a situation where a pilot may not be able to safely land the aircraft. Assisting the pilot to land the aircraft safely in such conditions is an active area of research. A new method is being investigated that combines non-linear image enhancement with classification of runway edges to detect objects on the runway. The image is segmented into runway and non-runway regions, and objects that are found in the runway regions are deemed to constitute potential hazards. For runway edge …

Detecting Portable Electronic Devices Onboard Commercial Aircraft, Randy Woods

Electrical & Computer Engineering Theses & Dissertations

The need to detect unauthorized usage of intentionally transmitting portable electronic devices (PEDs) onboard commercial aircraft is growing while still allowing passengers to use selected unintentionally transmitting devices, such as laptop computers and CD players, during non-critical stages of flight. This thesis presents the development and testing of an installed system for detecting PEDs over multiple frequency bands. Additionally, the advantages of a fixed versus mobile system are discussed.

Data is presented to cover the frequency range of 20 MHz to 6.5 GHz with special attention given to the cellular and PCS telephone bands, Bluetooth, and the family radio service …

Development Of A Technique To Diagnose Subtalar Joint Instability, Ajaya Dhakal

Mechanical & Aerospace Engineering Theses & Dissertations

Most patients escape diagnosis of subtalar joint instability for years before treatment. Therefore, a clinically relevant technique to diagnose subtalar joint instability will improve its management. Towards this goal, a six degree of freedom positioning and loading device was developed to apply physiologic loads to the hindfoot. Because the ideal loading configuration to detect subtalar joint instability is unknown, the device was designed to apply rotational and translational forces simultaneously. Specifically, plantarflexion/dorsiflexion, inversion/eversion, and internal/external rotation can be applied individually or as coupled motions along with an anterior/posterior drawer. Kinematic data were collected from calcaneus, talus and tibia using a …

Nonlinear Flutter Analysis Of Curved Panels Under Yawed Supersonic Flow And At Elevated Temperatures Using Finite Elements, Satyajit Sudhir Ghoman

Mechanical & Aerospace Engineering Theses & Dissertations

There are large number of papers dedicated toward the investigation of flutter analysis of flat plates in supersonic flow regime, but very few papers address the problem of flutter of curved panels. Furthermore, many of the panel flutter investigations including thermal effects, have dealt with liat plates. Scarce literature exists regarding the flutter of curved panels with thermal effects. Hence, the objective of this thesis is to develop, for the first time in the literature, a consistent finite element formulation and an efficient solution procedure to investigate nonlinear flutter of curved panels at yawed supersonic flow at elevated temperatures.

Panel …