Engineering Commons^™

Volume Viscosity In Fluids With Multiple Dissipative Processes, Allan J. Zuckerwar, Robert L. Ash

Mechanical & Aerospace Engineering Faculty Publications

The variational principle of Hamilton is applied to derive the volume viscosity coefficients of a reacting fluid with multiple dissipative processes. The procedure, as in the case of a single dissipative process, yields two dissipative terms in the Navier-Stokes equation: The first is the traditional volume viscosity term, proportional to the dilatational component of the velocity; the second term is proportional to the material time derivative of the pressure gradient. Each dissipative process is assumed to be independent of the others. In a fluid comprising a single constituent with multiple relaxation processes, the relaxation times of the multiple processes are …

Pressure-Driven Transport Of Particles Through A Converging-Diverging Microchannel, Ye Ai, Sang W. Joo, Xiangchun Xuan, Shizhi Qian

Mechanical & Aerospace Engineering Faculty Publications

Pressure-driven transport of particles through a symmetric converging-diverging microchannel is studied by solving a coupled nonlinear system, which is composed of the Navier-Stokes and continuity equations using the arbitrary Lagrangian-Eulerian finite-element technique. The predicted particle translation is in good agreement with existing experimental observations. The effects of pressure gradient, particle size, channel geometry, and a particle's initial location on the particle transport are investigated. The pressure gradient has no effect on the ratio of the translational velocity of particles through a converging-diverging channel to that in the upstream straight channel. Particles are generally accelerated in the converging region and then …

Understanding Practical Limits To Heavy Truck Drag Reduction, Drew Landman, Richard Wood, Whitney Seay, John Bledsoe

Mechanical & Aerospace Engineering Faculty Publications

A heavy truck wind tunnel test program is currently underway at the Langley Full Scale Tunnel (LFST). Seven passive drag reducing device configurations have been evaluated on a heavy truck model with the objective of understanding the practical limits to drag reduction achievable on a modern tractor trailer through add-on devices. The configurations tested include side skirts of varying length, a full gap seal, and tapered rear panels. All configurations were evaluated over a nominal 15 degree yaw sweep to establish wind averaged drag coefficients over a broad speed range using SAE J1252. The tests were conducted by first quantifying …

Optimizing Computer-Aided Colonic Polyp Detection For Ct Colonography By Evolving The Pareto Front, Jiang Li, Adam Huang, Jack Tao, Jiamin Liu, Robert L. Van Uitert, Nicholas Petrick, Ronald Summers

Electrical & Computer Engineering Faculty Publications

A multiobjective genetic algorithm is designed to optimize a computer-aided detection (CAD) system for identifying colonic polyps. Colonic polyps appear as elliptical protrusions on the inner surface of the colon. Curvature-based features for colonic polyp detection have proved to be successful in several CT colonography (CTC) CAD systems. Our CTC CAD program uses a sequential classifier to form initial polyp detections on the colon surface. The classifier utilizes a set of thresholds on curvature-based features to cluster suspicious colon surface regions into polyp candidates. The thresholds were previously chosen experimentally by using feature histograms. The chosen thresholds were effective for …

Rapid Sensor Technology: A Risk And System Complexity Analyses Of Early Detection Of Influenza-Like-Illnesses, Cesar Ariel Pinto, Ipek Bozkurt

Engineering Management & Systems Engineering Faculty Publications

The development of effective and reliable methods to defend the nation against biological terrorism remains an urgent challenge to researchers in the areas of risk, bio-defense, public health, and emergency medicine. The emerging threat of the avian flu pandemic also highlights the unpreparedness of our nation's health care system to meet a highly contagious and infectious disease outbreak. The implementation of a rapid sensor technology for early detection of influenza-like-illness provides possible opportunities, as well as problems. Bounding and defining such a complex problem is one of the first challenges this research addresses. Approaching this problem from various perspectives such …

Embedding Simulation Education Into The Engineering Management Body Of Knowledge, Andreas Tolk, Ghaith Rabadi, Donald N. Merino

Computational Modeling & Simulation Engineering Faculty Publications

The American Society for Engineering Management (ASEM) established a Body of Knowledge (BoK). As simulation is of growing interest to engineers in general and to engineering managers in particular, simulation is part of this documentation of domains of interest that characterise the profession. The basis for the Body of Knowledge comprises of established and accredited curricula and additional input from practitioners of the field. As it is essential to cover the basic topics and core competences as well as application specific domain knowledge, the simulation education for engineers is categorised into topics on simulation theory and simulation application.

Biomedical Technology: Supporting Movement, Petros Katsioloudis

STEMPS Faculty Publications

According to the National Institute on Disability and Rehabilitation Research, an estimated 8.5 million children 21 years and younger have a disability (Jans & Stoddard, 1999). After about a decade, with the development of new and sophisticated materials (aluminum alloys, titanium alloys, and carbon fibers) and the integration of electronics, it was then possible to significantly improve the performance of prostheses, built with the so-called endo skeletal (or skeletal-modular) method (Mora, Beratni & Pedrotti, 2006).

International Service Learning Projects For Senior Capstone Projects, Steve Reichle, Avery Bang, Carol Considine

Engineering Technology Faculty Publications

Service learning is being adopted in many engineering programs at various course levels. International service learning experiences can provide senior level engineering students with opportunities to practice the required skills of engineering graduates as detailed by the ABET Criteria for Accrediting Engineering Programs. Bridges to Prosperity is a non-profit organization that builds footbridges in rural third world communities. These design build footbridge projects require a full year for fundraising, site visit, design and construction, and provide engineering students an opportunity to practice their knowledge of globalization, sustainability, engineering design, teamwork, and leadership. A team of students from the University of …

System Design And Integration For Repeated Impact Tests, Cheng Lin, Gene Hou, Sebastian Bawab, Timothy Coats, Hesham Nassar

Engineering Technology Faculty Publications

The design and integration of an impact-testing machine is particularly for the test of an object which is repeatedly dropped down from a specified height. Four linear actuators with two on each of the two magnetic rails are used to lift up an object weighing up to 70 lbs. Each actuator is powered and controlled by an industrial amplifier. A Programmable Logical Controller (PLC) is applied to activate these four actuators simultaneously and repeatedly. Accelerometers using an National Instruments (NI) data acquisition system are used to measure the impact force during the tests. Students gain design and implementation experiences from …

Cold Plasma Technology: Bactericidal Effects On Geobacillus Stearothermophilus And Bacillus Cereus Microorganisms, Angela D. Morris, Gayle B. Mccombs, Tamer Akan, Wayne L. Hynes, Mounir Laroussi, Susan L. Tolle

Dental Hygiene Faculty Publications

Introduction: Cold plasma, also known as Low Temperature Atmospheric Pressure Plasma (LTAPP) is a novel technology consisting of neutral and charged particles, including free radicals, which can be used to destroy or inactivate microorganisms. Research has been conducted regarding the effect of cold plasma on gram-positive bacteria; however, there is limited research regarding its ability to inactivate the spore-formers Geobacillus stearothermophilus and Bacillus cereus.

Purpose: The purpose of this study was to determine if cold plasma inactivates G. stearothermophilus and B. cereus vegetative cells and spores.

Methods: Nine hundred eighty-one samples were included in this study (762 experimental and …

Precise Measurement Of The Neutron Magnetic Form Factor Gnm In The Few-Gev² Region, Clas Collaboration, J. Lachniet, H. Bagdasaryan, S. Bültmann, N. Kalantarians, G. E. Dodge, T. A. Forest, G. Gavalian, C. E. Hyde-Wright, A. Klien, S. E. Kuhn, M. R. Niroula, R. A. Niyazov, L. M. Qin, L. B. Weinstein, J. Zhang

Physics Faculty Publications

The neutron elastic magnetic form factor was extracted from quasielastic electron scattering on deuterium over the range Q² = 1.0–4.8  GeV² with the CLAS detector at Jefferson Lab. High precision was achieved with a ratio technique and a simultaneous in situ calibration of the neutron detection efficiency. Neutrons were detected with electromagnetic calorimeters and time-of-flight scintillators at two beam energies. The dipole parametrization gives a good description of the data

Selection Of Pressure Equation For Preliminary Planing Hull Design Using Modified Analytical Hierarchy Process, Pamela Sue Fergen

Mechanical & Aerospace Engineering Theses & Dissertations

In the early stages of design when data availability is limited, engineers often times rely upon experience and regression analysis to select the most suitable design equation among many competitive ones. This study presents an alternative that applies a modified Analytical Hierarchy Process (AHP) to select the most suitable design equation. The Analytical Hierarchy Process, a multi-criteria decision making method, has been utilized in the business and management world to collect and evaluate experts' opinions in order to arrive at a final decision. The Analytical Hierarchy Process employed here will treat each of the design equations as an expert and …

A Comparison Of Instructional Delivery Methods Based On Student Evaluation Data, John Hackworth, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

Distance Education is an increasingly common educational delivery method. At Old Dominion University, all junior and senior level engineering technology courses are offered via distance education at least once every two years. A majority of courses in the distance education system at this university have three simultaneous delivery methods: on-campus, televised (receiving the course at an off-campus site via satellite video/audio), and internet-based video-streamed.

This paper explores the results of student course evaluation surveys for trends, in particular those trends which can be a result of the mode of delivery. Results of these surveys for 23 courses over a 4-year …

Analysis Of Possible Use Of Identification Technologies In Disassembly, Vukica Jovanović, Sreten Filipović, Gordana Ostojić, Stevan Stankovski, Milovan Lazarević

Engineering Technology Faculty Publications

The barcodes and Radio Frequency Identification tags that are being used during manufacturing, assembly, warehousing, and distribution could also be reused at the end of the product lifecycle for an identification of the correct disassembly process that would result in recycling of its components. The barcodes or RFID tags can be helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper, the analysis of the current applications of RFID Technology in the final phase of the product lifecycle will be presented. The simulation of the disassembly process supported by both barcode and RFID-enabled …

Parameter Optimization For Image Denoising Based On Block Matching And 3d Collaborative Filtering, Ramu Pedada, Emin Kugu, Jiang Li, Zhanfeng Yue, Yuzhong Shen, Josien P.W. Pluim (Ed.), Benoit M. Dawant (Ed.)

Electrical & Computer Engineering Faculty Publications

Clinical MRI images are generally corrupted by random noise during acquisition with blurred subtle structure features. Many denoising methods have been proposed to remove noise from corrupted images at the expense of distorted structure features. Therefore, there is always compromise between removing noise and preserving structure information for denoising methods. For a specific denoising method, it is crucial to tune it so that the best tradeoff can be obtained. In this paper, we define several cost functions to assess the quality of noise removal and that of structure information preserved in the denoised image. Strength Pareto Evolutionary Algorithm 2 (SPEA2) …

Superfluid Turbulence From Quantum Kelvin Wave To Classical Kolmogorov Cascades, Jeffrey Yepez, George Vahala, Linda L. Vahala, Min Soe

Electrical & Computer Engineering Faculty Publications

The main topological feature of a superfluid is a quantum vortex with an identifiable inner and outer radius. A novel unitary quantum lattice gas algorithm is used to simulate quantum turbulence of a Bose-Einstein condensate superfluid described by the Gross-Pitaevskii equation on grids up to 5760³. For the first time, an accurate power-law scaling for the quantum Kelvin wave cascade is determined: k^-3. The incompressible kinetic energy spectrum exhibits very distinct power-law spectra in 3 ranges of k space: a classical Kolmogorov k^-(5/3) spectrum at scales greater than the outer radius of individual quantum vortex …

Tem Study Of Niobium Surfaces Treated By Different Polishing Techniques, A.T. Wu, D. Gu, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

TEM cross-section observation on Nb surfaces has been a challenge to our superconducting radio frequency (SRF) community due to the highly reactive nature of Nb. Although it was demonstrated in an early attempt1 that under a suitable sample preparation procedure reasonably clear cross-section images of Nb could be obtained, to the best of our knowledge good atomically resolved images had never been obtained. In this report, it is shown that by modifying the sample preparation procedure adopted in reference 1 it is possible to obtain good cross-section images of Nb surfaces with atomic resolution routinely. Surface atomic structures of Nb …

Seasonal Adaptation Of Vegetation Color In Satellite Images For Flight Simulations, Yuzhong Shen, Jiang Li, Vamsi Mantena, Srinivas Jakkula

Electrical & Computer Engineering Faculty Publications

Automatic vegetation identification plays an important role in many applications including remote sensing and high performance flight simulations. This paper proposes a novel method that identifies vegetative areas in satellite images and then alters vegetation color to simulate seasonal changes based on training image pairs. The proposed method first generates a vegetation map for pixels corresponding to vegetative areas, using ISODATA clustering and vegetation classification. The ISODATA algorithm determines the number of clusters automatically. We then apply morphological operations to the clustered images to smooth the boundaries between clusters and to fill holes inside clusters. Six features are then computed …

Automatic Diagnosis For Prostate Cancer Using Run-Length Matrix Method, Xiaoyan Sun, Shao-Hui Chuang, Jiang Li, Frederic Mckenzie, Nico Karssemeijer (Ed.), Maryellen L. Giger (Ed.)

Electrical & Computer Engineering Faculty Publications

Prostate cancer is the most common type of cancer and the second leading cause of cancer death among men in US¹. Quantitative assessment of prostate histology provides potential automatic classification of prostate lesions and prediction of response to therapy. Traditionally, prostate cancer diagnosis is made by the analysis of prostate-specific antigen (PSA) levels and histopathological images of biopsy samples under microscopes. In this application, we utilize a texture analysis method based on the run-length matrix for identifying tissue abnormalities in prostate histology. A tissue sample was collected from a radical prostatectomy, H&E fixed, and assessed by a pathologist …

Low-Temperature Growth Of Inn On Si(100) By Femtosecond Pulsed Laser Deposition, M. A. Hafez, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

InN films were grown on Si(100) using femtosecond pulsed laser deposition. Laser induced breakdown of ammonia was used to generate atomic nitrogen for InN growth. An indium buffer layer was initially deposited on the Si substrate at low temperature followed by an InN intermediate layer. The crystal quality and surface morphology were investigated by reflection high-energy electron diffraction during growth and atomic force microscopy and x-ray diffraction after growth. The results showed that the In (2×1) initial buffer layer improved the quality of the InN film. High quality InN films were grown at a temperature of ∼350 °C.

Dynamic Adaptation Of Joint Transmission Power And Contention Window In Vanet, Danda B. Rawat, Gongjun Yan, Dimitrie C. Popescu, Michele C. Weigle, Stephan Olariu

Electrical & Computer Engineering Faculty Publications

In this paper, we propose an algorithm for joint adaptation of transmission power and contention window to improve the performance of vehicular network in a cross layer approach. The high mobility of vehicles in vehicular communication results in the change in topology of the Vehicular Ad-hoc Network (VANET) dynamically, and the communication link between two vehicles might remain active only for short duration of time. In order for VANET to make a connection for long time and to mitigate adverse effects due to high and fixed transmission power, the proposed algorithm adapts transmission power dynamically based on estimated local traffic …

Electronic And Structural Properties Of Molybdenum Thin Films As Determined By Real Time Spectroscopic Ellipsometry, J. D. Walker, H. Khatri, V. Ranjan, Jian Li, R. W. Collins, S. Marsillac

Electrical & Computer Engineering Faculty Publications

Walker, J.D., Khatri, H., Ranjan, V., Li, J., Collins, R.W., & Marsillac, S. (2009). Electronic and structural properties of molybdenum thin films as determined by real-time spectroscopic ellipsometry. Applied Physics Letters, 94(14). doi: 10.1063/1.3117222

Quantum Algorithm For Bose-Einstein Condensate Quantum Fluid Dynamics: Twisting Of Filamentary Vortex Solitons Demarcated By Fast Poincare Recursion, Jeffrey Yepez, George Vahala, Linda L. Vahala

Electrical & Computer Engineering Faculty Publications

The dynamics of vortex solitons is studied in a BEC superfluid. A quantum lattice-gas algorithm (measurementbased quantum computation) is employed to examine the dynamical behavior vortex soliton solutions of the Gross-Pitaevskii equation (ø⁴ interaction nonlinear Schroedinger equation). Quantum turbulence is studied in large grid numerical simulations: Kolmogorov spectrum associated with a Richardson energy cascade occurs on large flow scales. At intermediate scales, a new k^-6 power law emerges, due to vortex filamentary reconnections associated with Kelvin wave instabilities (vortex twisting) coupling to sound modes and the exchange of intermediate vortex rings. Finally, at very small spatial scales a …

Dc Electrokinetic Transport Of Cylindrical Cells In Straight Microchannels, Ye Ai, Ali Beskok, David T. Gauthier, Sang W. Joo, Shizhi Qian

Biological Sciences Faculty Publications

Electrokinetic transport of cylindrical cells under dc electric fields in a straight microfluidic channel is experimentally and numerically investigated with emphasis on the dielectrophoretic (DEP) effect on their orientation variations. A two-dimensional multiphysics model, composed of the Navier-Stokes equations for the fluid flow and the Laplace equation for the electric potential defined in an arbitrary Lagrangian-Eulerian framework, is employed to capture the transient electrokinetic motion of cylindrical cells. The numerical predictions of the particle transport are in quantitative agreement with the obtained experimental results, suggesting that the DEP effect should be taken into account to study the electrokinetic transport of …

Multicast Encryption Infrastructure For Security In Sensor Networks, Richard R. Brooks, Brijesh Pillai, Matthew Pirretti, Michele C. Weigle

Computer Science Faculty Publications

Designing secure sensor networks is difficult. We propose an approach that uses multicast communications and requires fewer encryptions than pairwise communications. The network is partitioned into multicast regions; each region is managed by a sensor node chosen to act as a keyserver. The keyservers solicit nodes in their neighborhood to join the local multicast tree. The keyserver generates a binary tree of keys to maintain communication within the multicast region using a shared key. Our approach supports a distributed key agreement protocol that identifies the compromised keys and supports membership changes with minimum system overhead. We evaluate the overhead of …

Sensitive Detection Of Novel Effects And Characteristic Signal Structure Of Higher Harmonic Detection In Wavelength Modulation Spectroscopy, Mohammad Amir Khan

Electrical & Computer Engineering Theses & Dissertations

We discuss experimental and theoretical results of absorption features of the oxygen A-band transitions when synchronous detection at higher harmonics using Wavelength Modulation Spectroscopy (WMS) is performed. A key aspect of structure higher harmonic detection is discussed. It is shown that the signal magnitude and spectral locations of turning points and zero crossings of WMS signal demonstrate key signatures of collision dynamics of gaseous specie parameters and lineshape parameters. In addition, it is also shown that these salient features provide sensitive probes for any changes in the gas environment or lineshape parameters. We discuss several advantages and subtle physical effects …

High-Performance Broadcast And Multicast Protocols For Multi-Radio Multi-Channel Wireless Mesh Networks, Jun Wang

Electrical & Computer Engineering Theses & Dissertations

Recently, wireless mesh networks (WMNs) have attracted much attention. A vast amount of unicast, multicast and broadcast protocols has been developed for WMNs or mobile ad hoc networks (MANETs). First of all, broadcast and multicast in wireless networks are fundamentally different from the way in which wired networks function due to the well-known wireless broadcast/multicast advantage. Moreover, most broadcast and multicast protocols in wireless networks assume a single-radio single-channel and single-rate network model, or a generalized physical model, which does not take into account the impact of interference. This dissertation focuses on high-performance broadcast and multicast protocols designed for multi-radio …

Transformation Paradox: A Framework For The Analysis Of Politics In Enterprise Transformations, Cindy S. Miller

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research is to develop a theoretical framework for the analysis of politics in enterprise transformations using a dialectical analysis approach (Hegel, 1989; Heraclitus, 1979; Pinkard, 1988; Skinner, 1978a, 1978b) and conduct an evaluation of the framework validity. The framework is constructed using a dialectical analysis of concepts stemming from the work of Alford and Friedland (1992) and considers four theoretical perspectives: autocratic, bureaucratic, pluralistic, and cognitive. The framework is then validated by means of qualitative metrics and adherence to critical ideology.

This research addresses the problem that there is no holistic theoretical framework for the analysis …

Modeling And Simulation Of Coaxial Helicopter Rotor Aerodynamics, Murat Gecgel

Mechanical & Aerospace Engineering Theses & Dissertations

A framework is developed for the computational fluid dynamics (CFD) analyses of a series of helicopter rotor flowfields in hover and in forward flight. The methodology is based on the unsteady solutions of the three-dimensional, compressible Navier-Stokes equations recast in a rotating frame of reference. The simulations are carried out by solving the developed mathematical model on hybrid meshes that aim to optimally exploit the benefits of both the structured and the unstructured grids around complex configurations. The computer code is prepared for parallel processing with distributed memory utilization in order to significantly reduce the computational time and the memory …

A Subspace Projection Methodology For Nonlinear Manifold Based Face Recognition, Praveen Sankaran

Electrical & Computer Engineering Theses & Dissertations

A novel feature extraction method that utilizes nonlinear mapping from the original data space to the feature space is presented in this dissertation. Feature extraction methods aim to find compact representations of data that are easy to classify. Measurements with similar values are grouped to same category, while those with differing values are deemed to be of separate categories. For most practical systems, the meaningful features of a pattern class lie in a low dimensional nonlinear constraint region (manifold) within the high dimensional data space. A learning algorithm to model this nonlinear region and to project patterns to this feature …