Engineering Commons^™

College Students' Perceptions Of Sustainability: A Regional Survey, Michael Myung Jeong, Younghan Jung, Dan Daehyun Koo

Engineering Technology Faculty Publications

Understanding college students’ perception of sustainability is paramount as today’s students will soon be driving our economy and taking on the responsibility of maintaining a sustainable society. This study conducted a survey of college students attending two regional universities in the United States to capture their current experience levels, expectations, and perceptions with regard to various aspects of sustainability utilizing a questionnaire consisting of structured questions about sustainability knowledge/familiarity levels, green product purchase behavior, attitude-behavior relationship, and sustainability education. The results reveal useful insights into the students’ views on these topics and the demographic data collected were further analyzed to …

Energy-Efficient Computational Chemistry: Comparison Of X86 And Arm Systems, Kristopher Keipert, Gaurav Mitra, Vaibhav Sunriyal, Sarom S. Leang, Masha Sosonkina, Alistair P. Rendell, Mark S. Gordon

Computational Modeling & Simulation Engineering Faculty Publications

The computational efficiency and energy-to-solution of several applications using the GAMESS quantum chemistry suite of codes is evaluated for 32-bit and 64-bit ARM-based computers, and compared to an x86 machine. The x86 system completes all benchmark computations more quickly than either ARM system and is the best choice to minimize time to solution. The ARM64 and ARM32 computational performances are similar to each other for Hartree-Fock and density functional theory energy calculations. However, for memory-intensive second-order perturbation theory energy and gradient computations the lower ARM32 read/write memory bandwidth results in computation times as much as 86% longer than on the …

Designing A Resilient Building In The Coastal Zone, Don Kranbuehl, David Pryor

October 30, 2015: Beyond Toolkits: Adaptation Strategies and Lessons

No abstract provided.

Corps Efforts On Sea Level Rise In Hampton Roads, Greg Steele

October 30, 2015: Beyond Toolkits: Adaptation Strategies and Lessons

No abstract provided.

Panel Presentation: Regional Working Group, Regional Working Group

October 30, 2015: Beyond Toolkits: Adaptation Strategies and Lessons

No abstract provided.

Panel Presentation: Norfolk: Thriving With Water, Norfolk Working Group

October 30, 2015: Beyond Toolkits: Adaptation Strategies and Lessons

No abstract provided.

New Engineering Approaches To Arrhythmias And Myocardial Infarction, Frency Varghese

Biomedical Engineering Theses & Dissertations

In this thesis, we present new engineering approaches to several important cardiac diseases. Chapter 1 considers the dynamics of arrhythmias. The most dangerous arrhythmias are reentrant arrhythmias, including ventricular fibrillation and ventricular tachycardia. During these arrhythmias, there are one or several rotating excitation waves present in the heart. Because of their shape, these waves are called scroll waves; their center of rotation is a one-dimensional curve called the filament. Filaments largely constrain the configuration of a scroll wave but are much simpler, so much effort has gone into describing scroll wave dynamics in terms of the dynamics of their filaments. …

Using Eye And Head Movements As A Control Mechanism For Tele-Operating A Ground-Based Robot And Its Payload, Kathryn C. Hicks

Computational Modeling & Simulation Engineering Theses & Dissertations

To date, eye and head tracking has been used to indicate users' attention patterns while performing a task or as an aid for disabled persons, to allow hands-free interaction with a computer. The increasing accuracy and the reduced cost of eye- and head-tracking equipment make utilizing this technology feasible for explicit control tasks, especially in cases where there is confluence between the visual task and control.

The goal of this research was to investigate the use of eye-tracking as a more natural interface for the control of a camera-equipped, remotely operated robot in tasks that require the operator to simultaneously …

Multiple Point Constraint (Mpc)-Based Variable Node Super-Element, Mohamad Eftekharjoo

Mechanical & Aerospace Engineering Theses & Dissertations

The multiple point constraint (MPC)-based variable node element is introduced in this study to handle mismatched meshes between sub-domains in finite element analysis. The MPC-variable node element is a collection of a group of elements. The compatibility condition along the interface boundary is imposed along the edge of these elements through Lagrange multipliers. The Elimination method is then used to remove the effects of the dependent nodes in these elements to produce a single MPC-based variable node element. The derived variable node elements are applied to solve two plane strain problems in order to validate the accuracy of the proposed …

Synthesis, Characterisation, Electrochemical, And Spectroscopic Studies Of Cobaloximes: Unique Clues Of Cobalt(I) Species In Various Solvents, Michael John Celestine

Chemistry & Biochemistry Theses & Dissertations

With the dwindling amount of fossil fuels in the world’s reserve is said to run out in the future. The use of alternative fuels such as hydrogen can be produced from renewable sources. One source is the use of first row transition metal complexes that can harness the power of the sun to reduce protons to hydrogen. In this thesis we investigated a well-known hydrogen evolution catalyst in a quest to understand the behavior of different oxidation states that occur during the catalytic cycle.

In an attempt to synthesize a binuclear ruthenium(II) complex, [{Ru(phen)2}2{µmes(1,4-phO-Izphen)3}](PF6)4, as a possible photosensitizer for the …

Comparing Nutrient Recovery Via Rapid (Flash Hydrolysis) And Conventional Hydrothermal Liquefaction Processes For Microalgae Cultivation, Caleb Richard Talbot

Civil & Environmental Engineering Theses & Dissertations

Algal biofuels have the potential to provide a scalable source of renewable fuels in the near future. The high nutrient use in algae cultivation and its recovery and recycling is one of the challenges that may limit the scalability and sustainability of algal biofuels. The present study evaluates the use of Hydrolysate obtained after Flash Hydrolysis (FH) of Scenedesmus at 280 C as a nutrient source for microalgae cultivation. FH Hydrolysate nutrient recycling was compared with low temperature batch Hydrothermal Liquefaction (HTL) nutrient recycling. Oocystis and Scenedesmus were cultivated using Hydrolysate as a partial phosphorous (P) and nitrogen (N) source. …

A Risk Assessment Of The Impacts Of Coastal Flooding And Sea Level Rise On The Existing And New Pump Stations 113, Norfolk, Va, David A. Pezza

Civil & Environmental Engineering Theses & Dissertations

The author assessed the risk to a wastewater pump station and a planned replacement located nearby due to coastal flooding and rising sea levels. The locations for the pump stations are in the Larchmont neighborhood by the Lafayette River tidal estuaries in Norfolk, Virginia. The Lafayette River is a tributary to the Elizabeth River, which flows to the Chesapeake Bay. The low-lying areas along the river are subject to coastal surges caused by tropical and extra-tropical storms that flood the bay.

The region is considered one of the urban areas most exposed to the accelerating rate of rising sea levels. …

Improving Response Characteristics Of Split Ring Resonators Using Experimental Designs, Omer Faruk Keskin

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this thesis is to investigate the application of design of experiments approaches in the analysis of split ring resonators, and to compare two different approaches. The design parameters of the meta-material device are examined to study all the main effects, the two factor interactions, and the curvature effects. A full factorial design and a central composite design is utilized for the study. The results in improving split ring resonator design are discussed.

This study shows that the design of experiments approaches can effectively be utilized to examine the effects on the response values of a specific type …

An Approach For The Development Of Complex Systems Archetypes, Walter Lee Akers

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research is to explore the principles and concepts of systems theory in pursuit of a collection of complex systems archetypes that can be used for system exploration and diagnostics. The study begins with an examination of the archetypes and classification systems that already exist in the domain of systems theory. This review includes a critique of their purpose, structure, and general applicability. The research then develops and employs a new approach to grounded theory, using a visual coding model to explore the origins, relationships, and meanings of the principles of systems theory. The goal of the …

Examining The Relationship Between Leadership Decision Making Styles And Personality Type Within The Department Of Defense, Antoine Lamont Prince Sr.

Engineering Management & Systems Engineering Theses & Dissertations

Leadership is perhaps the single most important function within the Department of Defense. While the old cliché “everyone is a leader regardless of position” may hold moral meaning, personnel in leadership positions are key. Under the umbrella of leadership is decision making. What leadership is to an organization, decision making is to leadership. Yet, despite this knowledge, unsound decisions are readily conducted. There are various theories as to why this holds true, one of which is personality type. Research however, shows that there is a limited amount of relevant knowledge to determine if there is in fact a …

Dynamic Project Time And Cost Evaluation Under The Combined Influence Of Contract, Quality, And Uncontrollable Change, Thomas V. Hammock

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation proposes a method that quantifies the dynamics caused by disruptions due to multiple changes that can occur during the progression of a large scale project. To begin, equations consisting of multiple parallel event sequences are derived that define the relationship between individual process events and the final project completion time. Matrix notation and a precedence matrix concept are used in this derivation to produce equations that are best suited for computer programming applications. This relationship is the foundation upon which the equations are built to calculate the variation impact on each event of a large scale project. Pursuing …

Techno-Economic Analysis Of Protein Concentrate Produced By Flash Hydrolysis Of Microalgae, Alexander Nana Yaw Asiedu

Civil & Environmental Engineering Theses & Dissertations

Process simulation and techno-economic analysis of 95wt.% protein concentrate from microalgae has been performed using SuperPro Designer v. 9.0. This work, first of its kind, is focused on the economic analysis of protein concentrate that includes processes such as microalgae cultivation, harvesting, protein extraction and drying steps. A baseline capacity of 160 MT/day protein concentrate production on commercial basis has been analyzed. This throughput requires 336 MT/day dry algae (54 wt.% protein). The amount of carbon dioxide required to grow this quantum of algae is estimated to be 648 MT/day, which is produced from an in situ 21 MW power …

Experimental And Predicted Behavior Of Frp Beam-Columns Including Retrofitting, Ali Al-Huazy

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of a theoretical and experimental study of Fiber Reinforce Polymer (FRP) beam-columns with uniaxial bending and including retrofitting. The research involved the design and fabrication of a testing apparatus which was then used for a series of beam-column tests. Three different types of beam-column cross sections were used, namely, channel section, I-section, and square tube section. Six non-retrofitted beam-columns were tested in addition to two retrofitted ones. The members were subjected to an eccentric vertical load applied through a lever arm generating gradually increasing axial load and uniaxial bending moment up to the maximum load. …

Numerical Studies And Optimization Of Magnetron With Diffraction Output (Mdo) Using Particle-In-Cell Simulations, Alireza Majzoobi

Electrical & Computer Engineering Theses & Dissertations

The first magnetron as a vacuum-tube device, capable of generating microwaves, was invented in 1913. This thesis research focuses on numerical simulation-based analysis of magnetron performance. The particle-in-cell (PIC) based MAGIC software tool has been utilized to study the A6 and the Rising-Sun magnetron structures, and to obtain the optimized geometry for optimizing the device performance. The A6 magnetron is the more traditional structure and has been studied more often. The Rising-Sun geometry, consists of two alternating groups of short and long vanes in angular orientation, and was created to achieve mode stability.

The effect of endcaps, changes in lengths …

Behavior And Strength Of Pultruded Frp I-Section Columns Including Uniaxial And Biaxial Bending, Emad M. Amin

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of a study of the behavior and strength of pultruded glass fiber reinforced polymer (FRP) I-section columns including uniaxial and biaxial applied bending moments. Also included in the study is a critical assessment of ASCE-LRFD Pre-standard for pultruded FRP structures in view of the rigorous analysis presented herein. The theoretical solution is based on a system of three coupled differential equations of equilibrium combined with pinned flexural and torsional boundary conditions. Effects of induced warping due to second-order terms as well as initial out-of-straightness are accounted-for in the governing differential equations. Detailed investigations into the …

Household Bush Burning Practice And Related Respiratory Symptoms In Grenada, The Caribbean, Muge Akpinar-Elci, Kareem Coomansingh, James Blando, Larissa Mark

Center for Global Health Publications

The practice of household bush burning in Grenada occurs frequently, though it is not well documented. The effects of the emissions from bush burning on respiratory health of the population have never been researched in Grenada. The goal of the study was to measure the frequency of bush burning and to investigate the relationship between bush burning practice and respiratory health in Grenada. In this cross-sectional study, a questionnaire was used to gather information from households in the parishes of St. George and St. Andrew, Grenada. In total, 225 participants were recruited and their responses on household bush burning and …

The Search For High-Impact Diagnostic And Management Tools For Low-And Middle-Income Countries: A Self-Powered Low-Cost Blood Pressure Measurement Device Powered By A Solid-State Vibration Energy Harvester, Onur Bilgen, John G. Kenerson, Muge Akpinar-Elci, Rebecca Hattery, Lisbet M. Hanson

Mechanical & Aerospace Engineering Faculty Publications

The World Health Organization has established recommendations for blood pressure measurement devices for use in low-resource venues, setting the triple A expectations of Accuracy, Affordability, and Availability. Because of issues related to training and assessment of proficiency, the pendulum has swung away from manual blood pressure devices and auscultatory techniques towards automatic oscillometric devices. As a result of power challenges in the developing world, there has also been a push towards semiautomatic devices that are not dependent on external power sources or batteries. Beyond solar solutions, disruptive technology related to solid-state vibrational energy harvesting may be the next iterative solution …

Mobile Cloud Computing Based Non Rigid Registration For Image Guided Surgery, Arun Brahmavar Vishwanatha

Computer Science Theses & Dissertations

In this thesis we present the design and implementation of a Mobile Cloud computing platform for non-rigid registration required in Image Guided Surgery (MCIGS). MCIGS contributes in flexible, portable and accurate alignment of pre-operative brain data with intra-operative MRI, for image guided diagnosis and therapy and endoscopic skull base surgery. Improved precision of image guided therapy and specifically neurosurgery procedures is known to result in the improved prognosis for brain tumor patients. MCI GS system is tested with Physics Based Non-Rigid Registration method form ITK. Our preliminary results for brain images indicate that the proposed system over Wi-Fi can be …

Nanosecond Pulse Electric Field Activated-Platelet Rich Plasma Enhances The Return Of Blood Flow To Large And Ischemic Wounds In A Rabbit Model, Barbara Y. Hargrave, Francis Li

Bioelectrics Publications

Platelet-rich plasma is a therapeutic strategy used for accelerating wound healing of a wide range of tissues through the release of platelet growth factors. Here, we describe a nonchemical, safe method for preparing platelet-rich plasma using nanosecond-pulsed electric fields (nsPEFs) and investigated the effect of this platelet-rich plasma on reperfusion of blood in large skin flap or ischemic hind limb wounds in New Zealand White rabbits. Laser Doppler images of blood flow to the dorsal surface of skin flap wounds or to ischemic hind limb wounds were obtained from wounds treated with 0.9% saline or nanosecond-pulsed electric field prepared platelet-rich …

Accuracy Comparison Of Numerical Integration Algorithms For Real-Time Hybrid Simulations, Ganesh Anant Reddy

Civil & Environmental Engineering Theses & Dissertations

The use of accurate numerical integration algorithms is one of the key factors for a successful real-time hybrid simulation (RTHS). In RTHSs, explicit integration algorithms are preferred more than implicit methods since all calculations need to be completed within a given time step during simulation. Explicit methods require the use of effective stiffness and damping for experimental substructures, which are incorporated into the calculation of the integration parameters. In general, those values that are greater than the expected stiffness and damping of the experimental substructure are used to ensure the stability of simulation. If a rate-dependent and nonlinear experimental substructure …

Nano Scale Mechanical Analysis Of Biomaterials Using Atomic Force Microscopy, Diganta Dutta

Mechanical & Aerospace Engineering Theses & Dissertations

The atomic force microscope (AFM) is a probe-based microscope that uses nanoscale and structural imaging where high resolution is desired. AFM has also been used in mechanical, electrical, and thermal engineering applications. This unique technique provides vital local material properties like the modulus of elasticity, hardness, surface potential, Hamaker constant, and the surface charge density from force versus displacement curve. Therefore, AFM was used to measure both the diameter and mechanical properties of the collagen nanostraws in human costal cartilage. Human costal cartilage forms a bridge between the sternum and bony ribs. The chest wall of some humans is deformed …

Constrained Discrete Phase Control Of A Heaving Wave Energy Converter In Irregular Seas Using Reinforcement Learning, Praveen D. Malali

Mechanical & Aerospace Engineering Theses & Dissertations

Designed for offshore deployment in irregular seas, the point absorber wave energy conversion (WEC) system is promisingly attractive amongst the currently available WEC technologies. The effectiveness of phase control when applied to a heaving point absorber through a hydraulic power take-off (PTO) system is systematically investigated in both regular and irregular waves. For this purpose, two phase control accumulators are utilized in the hydraulic PTO system. Simulations are performed in MATLAB® using the Cummins equation to model the dynamics of the heaving point absorber in the time domain.

For a given sea state, the opening instant of the control valves …

Meta-Raps Hybridization With Machine Learning Algorithms, Fatemah Al-Duoli

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation focuses on advancing the Metaheuristic for Randomized Priority Search algorithm, known as Meta-RaPS, by integrating it with machine learning algorithms. Introducing a new metaheuristic algorithm starts with demonstrating its performance. This is accomplished by using the new algorithm to solve various combinatorial optimization problems in their basic form. The next stage focuses on advancing the new algorithm by strengthening its relatively weaker characteristics. In the third traditional stage, the algorithms are exercised in solving more complex optimization problems. In the case of effective algorithms, the second and third stages can occur in parallel as researchers are eager to …

Priming Middle School Females’ Engagement In Engineering And Technology, Mary Bonk Isaac

STEMPS Theses & Dissertations

The purpose of this study was to validate data collected between 2009-2013 via an instrument used to assess middle school girls’ identification with and interest in engineering and technology following the Society of Women Engineers’ WOW events. Recognizing the importance of measuring the impact of such mentored E & T activities on young females’ attitudes about and interest in STEM, and more specifically, engineering and technology, SWE outreach experts developed a participant survey based on event objectives and domain knowledge, but never rigorously examined whether it produced statistically valid data that could be used to draw inferences about girls’ propensity …

Energy Harvesting-Aware Design For Wireless Nanonetworks, Shahram Mohrehkesh

Computer Science Theses & Dissertations

Nanotechnology advancement promises to enable a new era of computing and communication devices by shifting micro scale chip design to nano scale chip design. Nanonetworks are envisioned as artifacts of nanotechnology in the domain of networking and communication. These networks will consist of nodes of nanometer to micrometer in size, with a communication range up to 1 meter. These nodes could be used in various biomedical, industrial, and environmental monitoring applications, where a nanoscale level of sensing, monitoring, control and communication is required. The special characteristics of nanonetworks require the revisiting of network design. More specifically, nanoscale limitations, new paradigms …