Engineering Commons^™

Strategies For Sensor Data Aggregation In Support Of Emergency Response, X. Wang, A. Walden, M. Weigle, S. Olariu

Computer Science Presentations

PDF of a powerpoint presentation from the Military Communications Conference (MILCOM), Baltimore, Maryland, October 7, 2014. Also available on Slideshare.

Effective Cfrp Retrofitting Schemes For Prestressed Concrete Beams, Herish Abdullah Hussein

Civil & Environmental Engineering Theses & Dissertations

This thesis presents a detailed theoretical study of a number of retrofitting schemes for prestressed concrete beams using carbon fiber reinforced polymer (CFRP) sheets to increase flexural strength and ductility. A simply-supported beam subjected to a gradually increasing uniformly distributed load is adopted for the study with a variety of CFRP retrofiring schemes. Three different types of beam cross sections are included for quantifying the influence of CFRP retrofitting when used in high compression regions in addition to CFRP use in high tension areas. To achieve this goal, nonlinear moment curvature relations are developed and coupled with a finite-difference solution …

Engineering Design: A Cognitive Process Approach, Greg Joseph Strimel

STEMPS Theses & Dissertations

The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. …

Emergency Diesel-Electric Generator Set Maintenance And Test Periodicity, Stephen John Fehr

Engineering Management & Systems Engineering Theses & Dissertations

Manufacturer and industry recommendations vary considerably for maintenance and tests of emergency diesel-electric generator sets supporting critical operations power systems facilities. There is little consistency among sets of similar technology, and manufacturers and their representatives often provide contradictory guidance. As a result, periodicity of emergency diesel-electric generator set maintenance and tests varies considerably in practice. This work proposes and tests a research and analysis framework to develop parametric regression survival models of modern diesel-electric generator sets in emergency standby duty as a function of maintenance periodicity, test periodicity, and other predictors. Within this framework, predictors are developed from common maintenance …

Discretized Agent-Based Model Of Infectious Disease Spread That Uses Contact Probability, Tyrell L. Gardner

Computational Modeling & Simulation Engineering Theses & Dissertations

This study uses contact probability in an agent-based model to simulate the spread of an infectious disease. In order to perform the study, the agent-based model must first be discretized into events. Each agent in the model is given its own infectious disease state machine taken from the Susceptible-Exposed-Infected-Recovered (SEIR) model. The agents move between squares in a grid environment where each square represents a group. Groups have a contact probability as an attribute that is used to predict whether an agent comes in close contact with another agent. The transitions between the states in the SEIR model are easily …

High Dimensional Data Set Analysis Using A Large-Scale Manifold Learning Approach, Loc Tran

Electrical & Computer Engineering Theses & Dissertations

Because of technological advances, a trend occurs for data sets increasing in size and dimensionality. Processing these large scale data sets is challenging for conventional computers due to computational limitations. A framework for nonlinear dimensionality reduction on large databases is presented that alleviates the issue of large data sets through sampling, graph construction, manifold learning, and embedding. Neighborhood selection is a key step in this framework and a potential area of improvement. The standard approach to neighborhood selection is setting a fixed neighborhood. This could be a fixed number of neighbors or a fixed neighborhood size. Each of these has …

Idpal – A Partially-Adiabatic Energy-Efficient Logic Family: Theory And Applications To Secure Computing, Mihail T. Cutitaru

Electrical & Computer Engineering Theses & Dissertations

Low-power circuits and issues associated with them have gained a significant amount of attention in recent years due to the boom in portable electronic devices. Historically, low-power operation relied heavily on technology scaling and reduced operating voltage, however this trend has been slowing down recently due to the increased power density on chips. This dissertation introduces a new very-low power partially-adiabatic logic family called Input-Decoupled Partially-Adiabatic Logic (IDPAL) with applications in low-power circuits. Experimental results show that IDPAL reduces energy usage by 79% compared to equivalent CMOS implementations and by 25% when compared to the best adiabatic implementation. Experiments ranging …

Empirical Modeling Of Asynchronous Scalp Recorded And Intracranial Eeg Potentials, Komalpreet Kaur

Electrical & Computer Engineering Theses & Dissertations

A Brain-Computer Interface (BCI) is a system that allows people with severe neuromuscular disorders to communicate and control devices using their brain signals. BCIs based on scalp-recorded electroencephalography (s-EEG) have recently been demonstrated to provide a practical, long-term communication channel to severely disabled users. These BCIs use time-domain s-EEG features based on the P300 event-related potential to convey the user's intent. The performance of s-EEG-based BCIs has generally stagnated in recent years, and high day-to-day performance variability exists for some disabled users. Recently intracranial EEG (i-EEG), which is recorded from the cortical surface or the hippocampus, has been successfully used …

Evaluation Of Degradation In Gan High Electron Mobility Transistors Due To The Inverse Piezoelectric Effect, Deepthi Nagulapally

Electrical & Computer Engineering Theses & Dissertations

It has recently been postulated that high voltage stress can result in the degradation of nanoscale structures that are made up of piezoelectric materials. The inverse piezoelectric effect (IPE) is believed to be the likely reason for this degradation mechanism. Basically, the IPE leads to the creation of high internal stresses driven by the presence of an electric field. Consequently, devices based on piezoelectric materials are postulated to undergo defect formation induced by the large mechanical stress arising from the inverse piezoelectric effect in the presence of an applied bias. GaN based devices are mostly observed to show this degradation …

Numerical Study Of Poration And Ionic Conduction In Nanopores Caused By High-Intensity, Nanosecond Pulses In Cell, Hao Qiu

Electrical & Computer Engineering Theses & Dissertations

This dissertation focuses on the dynamics and bioeffects of electroporation of biological cell and ionic conduction in nanopores under high-intensity, nanosecond pulses. The electroporation model utilized the current continuity equation and the asymptotic Smoluchowski equation to explore the transmembrane potential and pore density of the plasma and intracellular membranes; the ionic conduction model employed the Poisson-Nernst-Planck equations and the Navier-Stokes equations to analyze the ionic current and ion concentration profile.

Nanosecond electric pulses of high-intensity amplitude can initiate electroporation of intracellular organelles. The pulse parameters and cell electrical properties, that can selectively electroporate liposomes but keep the plasma and nuclear …

Graphical Display Of The Effect Of Three Cash Flow Elements For Sensitivity Analysis, Kawintorn Pothanun

Engineering Management & Systems Engineering Theses & Dissertations

Sensitivity analysis is one of the most important analysis techniques in a decision making process. The analytic intent behind sensitivity analysis is the variation of parameters in data models, and the examination of the effect of these variations on the outcome of the models. There are four primary benefits from conducting a sensitivity analysis: (a) sensitivity analysis facilitates the decision makers' development of recommendations, (b) sensitivity analysis serves as a tool for communication among stakeholders or decision makers in a project or an organization, (c) sensitivity analysis increases overall understanding of the decision models, and (d) sensitivity analysis serves as …

A Method To Define Requirements For System Of Systems, Randy Gene Walker

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems-based method for defining System of Systems (SoS) requirements using an inductive research design. Just as traditional Systems Engineering (TSE) includes a requirements definition phase, so too does System of Systems Engineering (SoSE); only with a wider, more over- arching, systemic perspective. TSE addresses the design and development of a single system with generally a very specific functional purpose enabled by any number of subcomponents. SoSE however, addresses the design and development of a large, complex system to meet a wide range of functional purposes enabled by any number …

Implementation Of Analytical Fatigue Models Into Opensim To Predict The Effects Of Fatigue On Anterior Cruciate Ligament Loading, Michael A. Samann

Mechanical & Aerospace Engineering Theses & Dissertations

The anterior cruciate ligament (ACL) provides stability to the knee joint while performing activities such as a side step cut. Neuromuscular fatigue, a reduction in muscle force producing capabilities, alters lower extremity mechanics while performing a side step cut and may increase the risk of ACL injury, particularly in females. Musculoskeletal modeling allows for the measurement of muscle forces, which are difficult to measure in-vivo. Therefore, musculoskeletal modeling, may improve our understanding of the effects of neuromuscular fatigue on muscle force production and loading of the ACL. Therefore, the purpose of this study was to develop a musculoskeletal model which …

Time-Based Collision Risk Modeling For Air Traffic Management, Alan E. Bell

Engineering Management & Systems Engineering Theses & Dissertations

Since the emergence of commercial aviation in the early part of last century, economic forces have driven a steadily increasing demand for air transportation. Increasing density of aircraft operating in a finite volume of airspace is accompanied by a corresponding increase in the risk of collision, and in response to a growing number of incidents and accidents involving collisions between aircraft, governments worldwide have developed air traffic control systems and procedures to mitigate this risk. The objective of any collision risk management system is to project conflicts and provide operators with sufficient opportunity to recognize potential collisions and take necessary …

Investigation And Optimization Of A New Compact Superconducting Cavity For Deflecting And Crabbing Applications, Subashini Uddika De Silva

Physics Theses & Dissertations

Deflecting and crabbing structures have many applications in current accelerator systems. The primary use of a deflecting cavity is to separate a single beam into multiple beams. A crabbing cavity enables the head-on collision at the interaction point in particle colliders in order to increase the luminosity. The early uses of the deflecting structures have been in the early 1960s: these structures were disk loaded structures operating at room temperature. The crabbing structure which was installed at the NEK electron-positron collider was the first and only operational superconducting cavity of that kind. The most common design of superconducting deflecting and …

Meshless Mechanics And Point-Based Visualization Methods For Surgical Simulations, Rifat Aras

Computational Modeling & Simulation Engineering Theses & Dissertations

Computer-based modeling and simulation practices have become an integral part of the medical education field. For surgical simulation applications, realistic constitutive modeling of soft tissue is considered to be one of the most challenging aspects of the problem, because biomechanical soft-tissue models need to reflect the correct elastic response, have to be efficient in order to run at interactive simulation rates, and be able to support operations such as cuts and sutures.

Mesh-based solutions, where the connections between the individual degrees of freedom (DoF) are defined explicitly, have been the traditional choice to approach these problems. However, when the problem …

A Framework For Web Object Self-Preservation, Charles L. Cartledge

Computer Science Theses & Dissertations

We propose and develop a framework based on emergent behavior principles for the long-term preservation of digital data using the web infrastructure. We present the development of the framework called unsupervised small-world (USW) which is at the nexus of emergent behavior, graph theory, and digital preservation. The USW algorithm creates graph based structures on the Web used for preservation of web objects (WOs). Emergent behavior activities, based on Craig Reynolds’ “boids” concept, are used to preserve WOs without the need for a central archiving authority. Graph theory is extended by developing an algorithm that incrementally creates small-world graphs. Graph theory …

Feasibility Of Mainstream Nitrite Oxidizing Bacteria Out-Selection And Anammox Polishing For Enhanced Nitrogen Removal, Pusker Raj Regmi

Civil & Environmental Engineering Theses & Dissertations

Short-cut nitrogen removal avoids nitrite oxidation to nitrate by nitrite oxidizing bacteria (NOB) and allows a) reduction of formed nitrite to nitrogen gas via heterotrophic denitrification and/or b) oxidation of remaining ammonia with formed nitrite to nitrogen gas via anaerobic ammonia oxidation (anammox). The precondition for achieving shortcut nitrogen removal is suppression of NOB, which is favored by warm and high ammonia strength conditions found in internally generated ammonia-rich waste streams through anaerobic digestion of waste solids referred to as sidestreams or reject water. The discovery of anammox bacteria in the mid-1990s, which are capable of transforming NH₄+ …

Proceedings, Msvscc 2014, Old Dominion University, Department Of Modeling, Simulation & Visualization Engineering, Old Dominion University, Virginia Modeling, Analysis & Simulation Center

Modeling, Simulation and Visualization Student Capstone Conference

Proceedings of the 8th Annual Modeling, Simulation & Visualization Student Capstone Conference held on April 17, 2014 at VMASC in Suffolk, Virginia.

Section Abstracts: Astronomy, Mathematics, And Physics With Materials Science

Virginia Journal of Science

Abstracts of the Astronomy, Mathematics, and Physics with Materials Science Section for the 92nd Annual Meeting of the Virginia Academy of Science, May 13-15, 2014, Virginia Commonwealth University, Richmond, Virginia

An Initial Look At Robotics-Based Initiatives To Engage Girls In Engineering, Jennifer Michaeli, Vukica Jovanovic, Otilia Popescu, Ana Djuric, Ece Yaprak

Engineering Technology Faculty Publications

Over the past 10 years, the use of robotic kits in K-12 Science, Technology, Engineering, and Math (STEM) initiatives as well as undergraduate engineering education has increased significantly. However, a survey of students in grades 9–12 indicated that only 2–3% of women in high school express an intention to study engineering; conversely, 16% of high school men declared that they plan to pursue an engineering degree [1]. In this paper, the authors present an initial review of published literature regarding the use of robotics in schools to identify cases where robotic kits have been used to engage girls in STEM …

Section Abstracts: Biomedical And General Engineering

Virginia Journal of Science

Abstracts of the Biomedical and General Engineering Section for the 92nd Annual Meeting of the Virginia Academy of Science, May 13-15, 2014, Virginia Commonwealth University, Richmond, Virginia

Spatial Visualization Ability And Impact Of Drafting Models: A Quasi Experimental Study, Petros J. Katsioloudis, Vukica Jovanovic

STEMPS Faculty Publications

A quasi experimental study was done to determine significant positive effects among three different types of visual models and to identify whether any individual type or combination contributed towards a positive increase of spatial visualization ability for students in engineering technology courses. In particular, the study compared the use of different visual models - a 3D printed solid object, a 3D computer generated drawing and a 2D drawing.

A Systems-Based Framework For The Assessment Of Performance Measurement System Implementations In R&D Organizations, Kenneth S. Baggett Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Performance measurement is utilized by organizations in all industries, including research and development (R&D). Measures are developed, data are collected, and the measurement results are used to drive the organization. The implicit hope is, of course, that the measures drive the organization to improve. However, literature identifies high failure rates directly related to performance measurement system (PMS) implementations. Establishing the fundamental operational characteristics associated with successful PMSs would provide a significant contribution towards the establishment of PMS assessment criteria. This research addresses this gap through the use of a grounded theory method employed to identify these operational characteristics, assesses the …

Characterization Of An Impulse Radiating Antenna In The Near Field, Chandra Barjracharya

Electrical & Computer Engineering Theses & Dissertations

The biological effects of intense sub-nanosecond pulses on tissues or cells are in the dielectric domain and not based on thermal loading as in the conventional microwave radiation, which may lead to an entirely new approach of modifying cell functions. Moreover, the resulting cell functional change may be detected with higher resolution by broadband, sub-nanosecond pulses than conventional narrowband systems. The delivery of intense sub-nanosecond pulses to near-field biological tissues, however, has not been studied, not mentioning the focal depth and volume. In this dissertation, for the first time, an impulse radiating antenna with a balanced feed structure is studied …

Transparent Spectrum Co-Access In Cognitive Radio Networks, Jonathan Daniel Backens

Electrical & Computer Engineering Theses & Dissertations

The licensed wireless spectrum is currently under-utilized by as much as 85%. Cognitive radio networks have been proposed to employ dynamic spectrum access to share this under-utilized spectrum between licensed primary user transmissions and unlicensed secondary user transmissions. Current secondary user opportunistic spectrum access methods, however, remain limited in their ability to provide enough incentive to convince primary users to share the licensed spectrum, and they rely on primary user absence to guarantee secondary user performance. These challenges are addressed by developing a Dynamic Spectrum Co-Access Architecture (DSCA) that allows secondary user transmissions to co-access transparently and concurrently with primary …

Systems Theory Based Framework For Competency Models, Joseph M. Bradley

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems theoretic framework for design, analysis and transformation of competency models using an inductive research design. This research examines the origins and development of competency models from a systems theoretic perspective. Competency models have been largely developed by a comparative method first proposed by McClelland, or the use of Delphi method survey techniques. The assumption that a population containing an exemplar and fully successful members would enable population of a holistic competency model has reported numerous failures. Similarly, reporting on the use of Delphi methods has focused on attempting …

The Relationship Among Hfacs Levels And Analysis Of Human Factors In Unmanned And Manned Air Vehicles, Veysel Yesilbas

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation analyzes the structural relationships among the Human Factors Accident Classification System levels for unmanned air vehicle and manned air vehicle accidents and the common relationships between unmanned air vehicle and manned air vehicle accident causes. The study acquired DOD HFACS accident classification data from 347 United States Air Force Class A accident reports for the years between 2000 and 2013.

The dissertation utilized a set of analysis that is considered to contribute substantially to the respective domain of the study. The correlations found among categorical levels were applied to HFACS taxonomy based on the Reason Model via path …

An Investigation Into The Analysis Of Truncated Standard Normal Distributions Using Heuristic Techniques, John Walter Ralls

Engineering Management & Systems Engineering Theses & Dissertations

Standard normal distributions (SND) and truncated standard normal distributions (TSND) have been widely used and accepted methods to characterize the data sets in various engineering disciplines, financial industries, medical fields, management, and other mathematic and scientific applications. For engineering managers, risk managers and quality practitioners, the use of the standard normal distribution and truncated standard normal distribution have particular relevance when bounding data sets, evaluating manufacturing and assembly tolerances, and identifying measures of quality. In particular, truncated standard normal distributions are used in areas such as component assemblies to bound upper and lower process specification limits.

This dissertation presents a …

An Investigation Of Business Transformation Disruptors At The Military Strategic Command Level, Thomas Bock

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation contributes an empirical research on business transformation disruption in the military. Specifically, this exploratory research seeks a better understanding of disruption of business transformation and some of the factors that are likely to impact the transformation process at the military strategic command level. A lack of empirical studies existing in the literature, coupled with the continuous transformation challenges faced by military organizations, make it necessary to conduct this empirical study of business transformation disruption in the military.

This research was carried out utilizing a two-phase mixed-methods approach. The first phase included qualitative data gathering through a series of …