Heat Transfer, Combustion Commons^™

Laminar And Turbulent Study Of Combustion In Stratified Environments Using Laser Based Measurements, Stephen William Grib

Theses and Dissertations--Mechanical and Aerospace Engineering

Practical gas turbine engine combustors create extremely non-uniform flowfields, which are highly stratified making it imperative that similar environments are well understood. Laser diagnostics were utilized in a variety of stratified environments, which led to temperature or chemical composition gradients, to better understand autoignition, extinction, and flame stability behavior. This work ranged from laminar and steady flames to turbulent flame studies in which time resolved measurements were used.

Edge flames, formed in the presence of species stratification, were studied by first developing a simple measurement technique which is capable of estimating an important quantity for edge flames, the advective heat …

NoX Formation In Light-Hydrocarbon, Premixed Flames, Robert T. Hughes

Theses and Dissertations--Mechanical and Aerospace Engineering

This study explores the reactions and related species of NO_x pollutants in methane flames in order to understand their production and consumption during the combustion process. To do this, several analytical simulations were run to explore the behavior of nitrogen species in the pre-flame, post- flame, and reaction layer regions. The results were then analyzed in order to identify all "steady-state" species in the flame as well as the determine all the unnecessary reactions and species that are not required to meet a defined accuracy. The reductions were then applied and proven to be viable.

Characterization Of Methane-Air Diffusion Flames For Flame Synthesis Application Through Optical Diagnostics, Zhaojin Diao

Theses and Dissertations--Mechanical and Aerospace Engineering

Flame synthesis is a growing field of research aiming at forming new materials and coatings through injection of seed materials into a flame. Accurate prediction of the thermal structure of these flames requires detailed information on the radiative properties and a thorough understanding of the governing combustion processes. The objective of this work is to establish a basic optical diagnostic characterization of different methane-air diffusion flames of different complexity. The basic principles are developed and demonstrated at a rotational symmetric co-flow burner and finally applied to a burner consisting of six clustered microflames which is designed for future flame synthesis …

The Kentucky Re-Entry Universal Payload System (Krups): Sub-Orbital Flights, James Devin Sparks

Theses and Dissertations--Mechanical and Aerospace Engineering

The Kentucky Re-entry Universal Payload System (KRUPS) is an adaptable testbed for atmosphere entry science experiments, with an initial application to thermal protection systems (TPS). Because of the uniqueness of atmospheric entry conditions that ground testing is unable to replicate, scientists principally rely on numerical models for predicting entry conditions. The KRUPS spacecraft, developed at the University of Kentucky, provides an inexpensive means of obtaining validation data to verify and improve these models.

To increase the technology readiness level (TRL) of the spacecraft, two sub-orbital missions were developed. The first mission, KUDOS, launched August 13th, 2017 on a Terrier-Improved Malamute …

Multiphase Interaction In Low Density Volumetric Charring Ablators, Ali D. Omidy

Theses and Dissertations--Mechanical and Aerospace Engineering

The present thesis provides a description of historical and current modeling methods with recent discoveries within the ablation community. Several historical assumptions are challenged, namely the presence of water in Thermal Protection System (TPS) materials, presence of coking in TPS materials, non-uniform elemental production during pyrolysis reactions, and boundary layer gases, more specifically oxygen, interactions with the charred carbon interface.

The first topic assess the potential effect that water has when present within the ablator by examining the temperature prole histories of the recent flight case Mars Science Laboratory. The next topic uses experimental data to consider the instantaneous gas …

Investigation On The Potential Of A Co2 Capture System, Downstream Of The Aftertreatment System For A Heavy-Duty Engine Application, Murchana Pathak

Dissertations, Master's Theses and Master's Reports

The transportation sector accounts for the second largest source of CO₂ emissions after power generation. New Corporate Average Fuel Economy (CAFE) regulations are focusing on improving energy through reduced fuel consumption and greenhouse gas emissions. This work investigates the potential of a CO₂ capture system downstream of an aftertreatment system for a heavy-duty engine application. Amine absorption has been described as one of the most effective ways to capture CO₂ from the exhaust for point sources. Therefore, using thermal-swing absorption process with potassium carbonate (K₂CO₃) as the absorbent liquid, a process was analyzed …

A New Technique To Determine Accommodation Coefficients Of Cryogenic Propellants, Kishan Bellur

Dissertations, Master's Theses and Master's Reports

The control of propellant boil-off is essential in long-term space missions. However, a clear understanding of cryogenic propellant phase change and the values of accommodation coefficients are lacking. To that effect, a new method to determine accommodation coefficients using a combination of neutron imaging, thin film evaporation modeling and CFD modeling has been established. Phase change experiments were conducted in the BT-2 Neutron Imaging Facility at the National Institute of Standards and Technology (NIST) by introducing cryogenic vapor (H2 and CH4) at a set pressure into Al6061 and SS316L test cells placed inside a 70mm cryostat. Condensation is achieved by …

Experimental And Computational Investigation Of Dual Fuel Diesel- Natural Gas Rcci Combustion In A Heavy-Duty Diesel Engine, Mufaddel Dahodwala

Dissertations, Master's Theses and Master's Reports

Among the various alternative fuels, natural gas is considered as a leading candidate for heavy-duty applications due to its availability and applicability in conventional internal combustion diesel engines. Compared to their diesel counterparts natural gas fueled spark-ignited engines have a lower power density, reduced low-end torque capability, limited altitude performance, and ammonia emissions downstream of the three-way catalyst. The dual fuel diesel/natural gas engine does not suffer with the performance limitations of the spark-ignited concept due to the flexibility of switching between different fueling modes. Considerable research has already been conducted to understand the combustion behavior of dual fuel diesel/natural …

Design And Development Of Test Rigs To Experimentally Investigate Flow Loss And Heat Transfer In A Stirling Engine Heater Head, Pawan K. Yadav

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Stirling engines are attractive alternative for combined heat and power (CHP) systems, especially for high efficiency power generation using different heat sources. The hot side heat exchanger or heater head (HH) is one of the indispensable components of Stirling engines which transfers the heat from outside of the system into the working fluid. For development of a low cost, highly efficient and reliable CHP system, a novel HH has been designed and additively manufactured from Inconel 625. For the investigation of flow loss and heat transfer through this Stirling engine heater head, two benchtop test rigs were designed, developed, …

Effects Of Air-Fuel Ratio And Operating Conditions On Particle Emissions From A Small Diesel Engine, Odinmma John-Paul Ofili

Master’s Theses

Automotive engineers typically increase the air-fuel ratio (AFR) of an engine to control the amount of smoke emitted, but it not quite known how this process affects particulate number (PN). In the work presented, AFR was independently varied to study its effects on PN. It was found that increasing the AFR reduced the concentrations of larger particles from 10⁸ #/cm³ to 10⁶ #/cm³ which is an effect observable as a reduction in smoke. However, the same increases in AFR only resulted in an energy specific PN change from 10¹⁵ #/kWh to 10¹⁴ #/kWh. The …

Spacecraft Fire Safety Research: Combustion Of Lithium-Ion Batteries To Predict Fire Scenarios, Elisabeth Meyer

Williams Honors College, Honors Research Projects

The purpose of this project was to research characteristics of a Lithium-ion battery fire to determine if trends exist in measured fire characteristics that can help predict different fire scenarios. These experiments will ultimately aid in developing an alarm threshold for a spacecraft smoke detector, specifically for Orion, a new, multi-purpose crew vehicle under development by NASA. Orion is the next-generation of spacecraft designed to replace the space shuttle and will play an important role in NASA’s journey to Mars.

In the experiments performed, Lithium-ion batteries were placed in a test chamber and ignited while smoke concentration was measured, simulating …

Experimental Investigation Of Impinged Droplet Dynamics, Nitisha Ahuja

Dissertations, Master's Theses and Master's Reports

The fuel spray wall interaction phenomenon plays an essential role in determining the emissions and performance of an internal combustion engine. The investigation of single droplet wall interaction is crucial to understanding of a spray wall impingement process. This report is a compilation of the experimental work done to understand the droplet impingement characteristics, through optical diagnostics and temperature measurement. Different fuels and different surface under ambient and elevated temperature conditions are used for these tests, with two objectives: Development of a common depositionsplashing criteria; and Understanding droplet post impingement dynamics variation with factors like: Weber number (ratio of inertia …

Simulation Of An Ethylene Flame With Turbulence, Soot And Radiation Modeling, Santu Golder

Electronic Theses and Dissertations

This thesis will investigate soot models that are available in commercial codes. We will look at the effect of turbulence models, gravity, soot models and radiation. Simulations will be compared to Coppalle and Joyeux [1]. The flame is an ethylene air diffusion flame at a Reynolds number of 5700. Simulations show the SST turbulence model, one-step soot model and Rosseland radiation model including gravity agree well with experimental data (temperature and soot). Flamelet soot modeling from Carbonell et al. [2] and flamelet radiation modeling from Doom [3] has been incorporated and compared as well.

An Experimental Investigation Of The Cooling System For A Free Piston Stirling Engine, Akshay Milind Gupte

Graduate Theses, Dissertations, and Problem Reports (ETD)

Free-Piston Stirling Engine (FPSE) has been identified as a good candidate for combined heat and power application (CHP). FPSE being highly efficient and environmentally friendly promises to facilitate the increasing demand in waste heat energy recovery systems. FPSE system consists of three important components: (1) hot side heat exchanger; (2) regenerator; and (3) cold side heat exchanger. The cold side heat exchanger is a crucial part as it enables to maintain an optimal temperature of the working fluid by rejecting heat.

This research contributes to the design of heat exchanger test rig and experimental measurement of cooling heat exchanger. The …

Experimental Design, Testing, And Evaluation Of Methods To Improve The Efficiency And Reduce Emissions From A Small Two-Stroke Natural Gas Engine, Christopher Joseph Ulishney

Graduate Theses, Dissertations, and Problem Reports (ETD)

Decentralized power generation is a research area of interest due to possible improvements in electrical generation efficiency and grid resilience. Two-stroke engines are simple, inexpensive, power dense systems that could serve as the prime-movers for combined heat and power (CHP) systems. In addition, such systems could be fueled on natural gas (NG) that is readily available to serve as a reliable fuel source in most households. However, most two-stroke engines are inefficient and produce excessive emissions. This research focused on methods to simultaneously improve engine efficiency and decrease emissions from a 34 cc air-cooled, two-stroke engine retrofitted to operate on …

Investigation Of Combustion Characteristics Of A Heavy-Duty Diesel Engine Retrofitted To Natural Gas Spark Ignition Operation, Jinlong Liu

Graduate Theses, Dissertations, and Problem Reports (ETD)

The conversion of existing diesel engines to natural-gas spark ignition operation by adding a gas injector in the intake manifold for fuel delivery and replacing the diesel fuel injector with a spark plug to initiate and control the combustion process can reduce U.S. dependence on petroleum imports and curtail engine-out emissions. As the conventional diesel combustion chamber (i.e., flat head and bowl-in-piston) creates high turbulence, the engine can operate leaner, which would increase its efficiency and reduce emissions. However, natural gas combustion in such retrofitted engines presents differences compared to that in conventional spark ignited engines. Subsequently, the main goal …

Reduced Exhaust Emissions Through Blending N-Butanol With Ultra Low Sulfur Diesel And Synthetic Paraffinic Kerosene In Reactivity Controlled Compression Ignition Combustion, Remi Gaubert

College of Graduate Studies: Theses & Dissertations

Increasing restrictions on the emitted exhaust emissions in diesel engines are becoming a more challenging task than in previous years. An electronic common rail fuel injection system and a port fuel injection (PFI) system were developed for an experimental engine to research dual fuel combustion. The experimental research was conducted at 1500 rpm and 4, 5, and 6 bar indicated mean effective pressure (IMEP). n-Butanol was port fuel injected at a 60% by mass fraction coupled with direct injection (DI) of three fuels, including ultra-low sulfur diesel (ULSD RCCI), a 50-50 wt-% blend of ULSD and butanol (ULSD-Bu RCCI), and …

An Experimental And Computational Study Of Fuel Spray Interaction: Fundamentals And Engine Applications, Le Zhao

Dissertations, Master's Theses and Master's Reports

An efficient spray injection results in better vaporization and air-fuel mixing, leading to combustion stability and reduction of emissions in the internal combustion (IC) engines. The impingement of liquid fuels on chamber wall or piston surface in IC engines is a common phenomenon and fuel film formed in the spray-piston or cylinder wall impingement plays a critical role in engine performance and emissions. Therefore, the study of the spray impingement on the chamber wall or position surface is necessary.

To understand the spray-wall interaction, a single droplet impingement on a solid surface with different conditions was first examined. The droplet-wall …

Spray And Combustion Studies Of High Reactivity Gasoline In Comparison To Diesel Under Advanced Compression Ignition Engine Conditions, Meng Tang

Dissertations, Master's Theses and Master's Reports

Gasoline compression ignition (GCI) technology has demonstrated great potentials in improving fuel economy and reducing engine-out NO_x and particulate matter emissions. Development and application of the GCI technology on multi-cylinder engines require both fundamental understandings of the gasoline spray combustion characteristics and accurate numerical tools. Due to the large differences in the thermo-physical and the chemical properties between gasoline and diesel range fuels, differences in the spray combustion characteristics between gasoline and diesel is expected. Reports on the gasoline spray combustion characteristics under conditions relevant to medium to heavy-duty engines are scarce and this dissertation aims to fill in …

Thermomagnetic Convective Cooling Of Hall Effect Thruster, Elizabeth M. Vanheusden

Dissertations, Master's Theses and Master's Reports

This work proposes and shows that thermomagnetic convection could be used in zero gravity to cool components of a Hall-effect thruster. A ferrofluid cavity was develop in the thermal and geometric model of a Hall-effect thruster. Simulations show that with an Ionic Liquid Ferrofluid after two minutes of thruster operations thermomagnetic convection occurs and in zero gravity will produce a larger velocity then natural convection that occurs in earth gravity. However, experiments did not result in heat transfer enhancement due to the limitation of the ferrofluid. Replacement of the Ferrotec EFH1 dispersant with dodecylbenzene did not result in Ionic Liquid …