Zip Load Modeling For Single And Aggregate Loads And Cvr Factor Estimation,
2021
university of Kentucky
Zip Load Modeling For Single And Aggregate Loads And Cvr Factor Estimation, Yiqi Zhang, Yuan Liao, Evan S. Jones, Nicholas Jewell, Dan M. Ionel
Electrical and Computer Engineering Presentations
ZIP load modeling has been used in various power system applications. The aggregate load modeling is common practice in utility companies. However, little research has been done on the theoretical formulation of the aggregate load. This paper formulates the aggregate ZIP load model using the single ZIP load model. The factors that may affect aggregate ZIP load estimation are studied. Common ZIP parameter estimation methods including least squares method, optimization method and neural network method have been used in this paper to estimate ZIP parameters. The case studies are based on the IEEE 13-bus and 34-bus system built in OpenDSS. …
Dft Study Of NiM@Pt1AuN-M-1 (N=19, 38, 55, 79; M = 1, 6, 13, 19) Core-Shell Orr Catalyst,
2021
1. State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, Liaoning, China;
Dft Study Of NiM@Pt1AuN-M-1 (N=19, 38, 55, 79; M = 1, 6, 13, 19) Core-Shell Orr Catalyst, Wen-Jie Li, Dong-Xu Tian, Hong Du, Xi-Qiang Yan
Journal of Electrochemistry
The slow kinetics of oxygen reduction reaction (ORR) limits the performance of low temperature fuel cells. Thus, it needs to design effective catalysts with low cost. Core-shell clusters (CSNCs) show promising activity because of their size-dependent geometric and electronic effects. The ORR activity trend of Nim@Pt1Aun-m-1(n = 19, 38, 55, 79; m = 1, 6, 13, 19) was studied using the GGA-PBE-PAW methods. The adsorption configurations of *O, *OH and *OOH were optimized and the reaction free energies of four proton electron (H+ + e-) transfer steps …
One-Pot Synthesis Of Fe2O3@Fe-N-C Oxygen Reduction Electrocatalyst And Its Performance For Zinc-Air Battery,
2021
College of Energy, Xiamen University, Xiamen 361005, Fujian, China;
One-Pot Synthesis Of Fe2O3@Fe-N-C Oxygen Reduction Electrocatalyst And Its Performance For Zinc-Air Battery, Hua Lin, Yi-Jin Wu, Jun-Tao Li, Yao Zhou
Journal of Electrochemistry
Oxygen reduction reaction (ORR) plays a profound role in determining cathode performance in metal-air batteries and fuel cells. Owing to its inherently sluggish kinetics, high-performance ORR catalysts which favors the scissoring of O-O bond and formation of O-H bond are a requisite. In this regard, Pt has been explored as the most efficient ORR electrocatalysts. Nevertheless, due to its expensiveness, the usage of Pt catalysts represents one of the major sources of cost in those energy conversion devices. Thus, the development of alternative ORR electrocatalysts with minimized Pt utilization has been widely pursued over the past few decades. Metal-nitrogen-carbon catalysts …
Study On Mxene-Carbon Black/Sulfur Composite In Integrated Electrode Of Lithium-Sulfur Batteries,
2021
1. Collaborative Innovation Center of Sustainable Energy Materials, Guangxi University, Nanning 530004, Guangxi, China;2. School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, Guangxi, China;
Study On Mxene-Carbon Black/Sulfur Composite In Integrated Electrode Of Lithium-Sulfur Batteries, Ye-Peng Fan, Ye-Qiang Luo, Pei-Kang Shen
Journal of Electrochemistry
Lithium-sulfur (Li-S) batteries are considered as a promising energy storage device due to their ultrahigh theoretical energy density of 2500 Wh·kg-1 and low cost. However, the practical application of Li-S batteries is seriously limited by their low actual energy density, the shuttle effect of polysulfides (LiPSs), and the insulating nature of sulfur and lithium sulfides. Carbon materials have been developed in the design of sulfur hosts due to their adjustable pore structure and high electrical conductivity, but their non-polar surfaces have weak interactions with LiPSs. Herein, MXene-carbon black/sulfur (Ti3C2Tx-CB/S) composites were prepared and …
Preparation And Electrochemical Evaluation Of Mos2/Graphene Quantum Dots As A Catalyst For Hydrogen Evolution In Microbial Electrolysis Cell,
2021
1. Department of Materials and Chemical Engineering, Taiyuan College, Taiyuan 030032, Shanxi, China;
Preparation And Electrochemical Evaluation Of Mos2/Graphene Quantum Dots As A Catalyst For Hydrogen Evolution In Microbial Electrolysis Cell, Hong-Yan Dai, Hui-Min Yang, Xian Liu, Xiu-Li Song, Zhen-Hai Liang
Journal of Electrochemistry
Microbial electrolysis cell (MEC) is a relatively new bioelectrochemical technology that produces H2 and meanwhile treats organic wastewater. Cathode hydrogen evolution catalyst plays a key role in MEC. The doping of Graphene Quantum Dots (GQDs) into MoS2 nanosheets can improve the catalytic activity of MoS2 by creating abundant defect sites both in the edge plane and the basal plane, as well as enhancing the electrical conductivity. In this paper, using Na2MoO4 , cysteine and GQDs as raw materials, a series of MoS2/GQDs composites were firstly synthesized via hydrothermal method, and then loaded …
Preparation Of Coo/Rgo@Ni Foam Electrode And Its Electrocatalytic Reduction Of Co2,
2021
College of Environment and Chemical Engineering, Jiangsu Ocean University, Lianyungang 222005, Jiangsu, China;
Preparation Of Coo/Rgo@Ni Foam Electrode And Its Electrocatalytic Reduction Of Co2, Qian Guo, Jia-Long Fu, Cheng-Yan Zhang, Chao-Yue Cai, Cheng Wang, Li-Hua Zhou, Rui-Bo Xu, Ming-Yan Wang
Journal of Electrochemistry
The worldwide extensive release of carbon dioxide (CO2) has caused serious environmental pollution and unprecedented climate change problems. Thus, for the sustainable development of human society, it is very necessary to convert CO2 to renewable fuels through clean and economical processes. The electrochemical CO2 reduction reaction (CO2RR) is regarded as a promising approach for the recycling of carbon resource and the generation of sustainable fuels. However, the slow kinetics and formation of multiple products in CO2RR hinder its large-scale application. Hence, great research efforts are made to develop electrocatalysts with high product …
Preparation Of 3d Semi-Interpenetrated Polymer Networks Polymer Electrolyte For Lithium Metal Battery,
2021
Sustainable Energy Laboratory, Faculty of Material Science and Chemistry, China University of Geosciences (Wuhan), Wuhan 430074, Hubei, China;
Preparation Of 3d Semi-Interpenetrated Polymer Networks Polymer Electrolyte For Lithium Metal Battery, Yun-Feng Zhang, Jia-Ying Wang, Xiao-Jie Li, Shi-Yu Zhao, Yang He, Shi-Kang Huo, Ya-Ying Wang, Chang Tan
Journal of Electrochemistry
As the next generation high-energy batteries, lithium metal battery has attracted more and more attention due to its highest specific capacity (3860 mA·h·g-1) and the lowest anode potential (-3.04 V versus the standard hydrogen electrode, SHE). However, the safety problem caused by lithium dendrite growth is one of the biggest challenges for the commercialization of lithium metal batteries. Single ion conducting polymer electrolytes, which deliver high lithium ion transference number, represent one of the important strategies to inhibit lithium dendrite growth. However, the poor compatibility with electrodes and low ionic conductivity largely limit their practical application. In the …
Study On Inhibition Of Lithium Dendrite Growth By Mg(No3)2 Additive In Carbonate Electrolyte,
2021
1. Powder Metallurgy Research Institute, Central South University, Changsha 410083, Hunan, China;
Study On Inhibition Of Lithium Dendrite Growth By Mg(No3)2 Additive In Carbonate Electrolyte, Biao Zhang, Yi Shuai, Yu Wang, Na-Chuan Yang, Kang-Hua Chen
Journal of Electrochemistry
In the lithium-sulfurized polyacrylonitrile battery system, the formation and growth of lithium dendrites in the negative electrode seriously deteriorate the charge and discharge performance of the battery. If the growth of lithium dendrites pierces the separator and causes thermal runaway, it will also bring serious damage to the battery, causing potential safety risks. In the carbonate electrolyte that is more conducive to stabilizing the positive electrode sulfurized polyacrylonitrile material, the growth of lithium dendrites is particularly serious. In this paper, magnesium nitrate was added to the carbonate electrolyte to investigate the combined effect of nitrate and magnesium ions on the …
A Comparison In Structural Transformation Of Li[NiXCoYMnZ]O2 (X = 0.6, 0.85) Cathode Materials In Lithium-Ion Batteries,
2021
Hefei Gotion High-Tech Power Energy Co., Ltd. Hefei 230012, Anhui, China;
A Comparison In Structural Transformation Of Li[NiXCoYMnZ]O2 (X = 0.6, 0.85) Cathode Materials In Lithium-Ion Batteries, Li-Juan Li, Zhen-Dong Zhu, Juan Dai, Rong-Rong Wang, Wen Peng
Journal of Electrochemistry
In this paper, the phase transformation voltage ranges of two layered oxide ternary cathode materials, namely, Li(Ni0.85Co0.10Mn0.05)O2 (referred to Ni85, presenting high Ni content) and Li(Ni0.6Co0.2Mn0.2)O2 (referred to Ni60, presenting common low Ni content), were classified and determined. The structural differences between high Ni and common low Ni ternary materials were studied in order to understand the structure instability of high nickel material during the charging process. At the same time, the differential capacity (dQ·dV-1) curves of Ni85 and Ni60 positive …
Effect Of Conductive Additives On Electrochemical Performance Of All-Solid-State Li-S Batteries,
2021
College of Energy, Xiamen University, Xiamen 361005, Fujian, China;
Effect Of Conductive Additives On Electrochemical Performance Of All-Solid-State Li-S Batteries, Dong-Hao Wang, He-Feng Yan, Zheng-Liang Gong
Journal of Electrochemistry
All-solid-state lithium sulfur batteries (ASSLSBs) with inorganic solid electrolytes offer an opportunity to realize both high energy density (lithium metal ~ 3860 mAh·g-1, sulfur ~ 1675 mAh·g-1), safety and reliability, via eliminating the polysulfides shuttle effect and flammable liquid electrolyte. However, it still remains a huge challenge for ASSLSBs to achieve high areal active mass loading, high utilization efficiency of the active materials and good cycle stability simultaneously due to the insulating nature of sulfur and Li2S (conductivities of sulfur and Li2S are 5×10-30 S·cm-1 and 3.6×10-7 S·cm-1 …
Storage Performance And Mechanism Of Mose2 Nanospheres In Lithium And Magnesium Ion Batteries,
2021
No.38 Research Institute, China Electronics Technology Group Corporation, Hefei 230088, Anhui, China;
Storage Performance And Mechanism Of Mose2 Nanospheres In Lithium And Magnesium Ion Batteries, Yi Peng, Wei Zhang, Fang-Zhen Zuo, Hao-Ying Lv, Kai-Jun Hong
Journal of Electrochemistry
Molybdenum diselenide (MoSe2) is a two-dimensional (2D) transition metal dichalcogenide (TMD) material, attracting wide attention in lithium ion battery (LIB) and exhibiting great potential in next-generation magnesium ion battery (MIB) due to its unique layered structure with fast ion mobility and weak van der Waals interlayer interaction. However, the reported literatures related to MoSe2 mainly focus on the enhancement of performance in LIB without deep storage mechanisms investigations. Meanwhile,the magnesium storage capacity and mechanisms have not been explored. In this work, MoSe2 nanospheres were synthesized via wet chemical route and followed by annealing treatment. When used …
Improved Ships Course-Keeping Robust Control Algorithm Based On Backstepping And Nonlinear Feedback,
2021
World Maritime University
Improved Ships Course-Keeping Robust Control Algorithm Based On Backstepping And Nonlinear Feedback, Sirui Wang
Maritime Safety & Environment Management Dissertations (Dalian)
No abstract provided.
The Effect Of A Ferrite-Core Relay Vs. An Air-Core Relay On The Output Power Characteristics Of A Three-Coil Wireless Power Transfer System,
2021
Portland State University
The Effect Of A Ferrite-Core Relay Vs. An Air-Core Relay On The Output Power Characteristics Of A Three-Coil Wireless Power Transfer System, Jakob L. White
University Honors Theses
The purpose of this thesis is to determine the effect of using a ferrite-core relay on the output power characteristics of a three-coil, parallel-tuned, domino-resonator wireless power transfer (WPT) system in comparison to the effect of using an air-core relay in such a system. First, a general mathematical model is presented to describe both the ferrite-core-relay system and the air-core-relay system and to calculate their output power characteristics for seven different resistive loads at each of five different distance configurations between the coils. Next, experimental results are analyzed and compared to the mathematical results to confirm model accuracy. Finally, the …
Stability Analysis In Central America’S Power Grid,
2021
Syracuse University
Stability Analysis In Central America’S Power Grid, Sergio Sunley
International Programs
Finding the source of instability is key in ensuring an electric power grid proper functioning. This poster shows the results obtained from a stability analysis performed in Central America’s power grid in order to find the source of instability of that grid.
Why Indonesia Needs A New Energy Paradigm,
2021
Syracuse University
Why Indonesia Needs A New Energy Paradigm, Aditya Prasetyo
International Programs
The problem of Indonesia's dependence on petroleum as its main energy source can be overcome by instead using an energy mix. This study focuses on optimal utilization of other energy resources that can help to meet the demand for energy in Indonesia and help to reduce its dependence on oil, thereby preventing a future energy crises.
An Intelligent Approach To High Impedance Fault Detection,
2021
Syracuse University
An Intelligent Approach To High Impedance Fault Detection, Iniobong Abasi-Obot
International Programs
In this poster, High Impedance Fault (HIF) is detected in Primary Distribution Network (PDN) using an Adaptive-Neuro Fuzzy Inference System (ANFIS) model. The detection of HIF in PDN is quite challenging because of its characteristic features (low fault current magnitude amongst others) and its delayed or non-detection causes devastating scenarios such as electric shock, wildfire, electrocution, system malfunctioning and power outages. This poster proposes an Intelligent approach in a simulated study. Simulink toolbox in MATLAB software was used to model a typical 33kV distribution network (DN) in Nigeria and accurate detection of HIF in the DN was achieved using fault …
Radiation Effects On Space Solar Cells At Various Earth And Jupiter Orbital Altitudes,
2021
Purdue University
Radiation Effects On Space Solar Cells At Various Earth And Jupiter Orbital Altitudes, Naazneen Rana
Discovery Undergraduate Interdisciplinary Research Internship
Solar cells are used as the primary power source for earth-orbiting satellites and as a primary/secondary power source for various missions within the solar system. However, high energy particles from the sun, planetary magnetospheres, and the galaxy can affect the performance and life expectancy of the space solar cell and associated power systems. As the interests for interplanetary travel and the exploration of planets within our solar system increase, the need to understand a device’s performance within a particular planet’s environment is necessary. Therefore, this study will analyze the performance of space solar cells, particularly the SolAero IMM-α, at various …
Effect Of Deposition Conditions On Properties Of Molybdenum Back Electrode For Cu(In,Ga)Se2 Solar Cell And Cu(In,Ga)Se2 Performance Analysis Through Numerical Simulation,
2021
The University of Texas Rio Grande Valley
Effect Of Deposition Conditions On Properties Of Molybdenum Back Electrode For Cu(In,Ga)Se2 Solar Cell And Cu(In,Ga)Se2 Performance Analysis Through Numerical Simulation, Meah Imtiaz Zulkarnain
Theses and Dissertations
In the first part of this research, the effect of the deposition conditions on properties of molybdenum thin-film were investigated to achieve desired characteristics for its application as the back electrode of Cu(In,Ga)Se2 solar cell. DC and RF magnetron sputtering modes were employed and two sputtering parameters namely, working pressure and sputtering power, were varied to determine the sputtering mode and the sputtering conditions best suited for Mo thin-films having required properties. Sputtered Mo samples were characterized to determine their structural and mechanical properties such as preferred growth orientation, crystallinity, grain size, dislocation density, adhesion, and micro strain, and electrical …
Design And Analysis Of A Single-Stage Inverter Using Parallel Dc-Dc Converters For Solar Cell Application,
2021
California Polytechnic State University, San Luis Obispo
Design And Analysis Of A Single-Stage Inverter Using Parallel Dc-Dc Converters For Solar Cell Application, Gabriel Leonides
Master's Theses
This thesis introduces the design and analysis of a single-stage inverter. A circuit was designed and simulated as a proof of concept to investigate the possibility of using boost and buck-boost converters to provide an AC output. The proposed circuit utilizes non-synchronous boost and buck-boost converters due to their simplicity in control signals as opposed to synchronous converters. The application of the proposed inverter is for use with individual solar cells. The aim of the inverter for a single cell is to improve the efficiency of a solar panel, whose performance is limited to the performance of the least efficient …
Knn Based Piezo-Triboelectric Lead-Free Hybrid Energy Films,
2021
The University of Texas Rio Grande Valley
Knn Based Piezo-Triboelectric Lead-Free Hybrid Energy Films, Abu Masa Abdullah, Muhtasim Ul Karim Sadaf, Farzana Tasnim, Horacio Vasquez, Karen Lozano, M. Jasim Uddin
School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)
In recent times, the triboelectric and piezoelectric effects have garnered significant attention towards developing advanced material composites for energy harvesting and sensory applications. In this work, potassium sodium niobate (KNN) based energy films (EF) have been developed to utilize mechanical energy while simultaneously taking advantage of triboelectric and piezoelectric mechanisms. The KNN particles were synthesized using a wet ball milling technique and then incorporated into a polyvinylidene difluoride (PVDF) matrix together with addition of multi wall carbon nanotubes (MWCNT). The film was used to develop a piezoelectric nanogenerator (PENG) fitted with copper electrodes. The piezoelectric output of the film was …
