Power and Energy Commons^™

Synthesis And Electrochemical Study Of Cuau Nanodendrites For Co2 Reduction, Dylan Siltamaki, Shuai Chen, Farnood Rahmati, Jacek Lipkowski, Ai-Cheng Chen

Journal of Electrochemistry

The conversion of carbon dioxide (CO₂) to carbon monoxide (CO) and other value-added products is an interesting approach for carbon-containing fuel synthesis using renewable and clean energy. The electrochemical reduction of CO₂ is one of the promising strategies for the storage of intermittent renewable energy resources. The development of electrocatalysts with high activity and stability is vital in the electrochemical CO₂ reduction process. In this study, copper and gold alloyed (CuAu) electrodes with nanodendritic structures were synthesized using a facile electrodeposition method. The CuAu nanodendrites with the atomic ratio of Cu to Au being approximately 1:1 …

Progress Of Lithium-Ion Transport Mechanism In Solid-State Electrolytes, Bing-Kai Zhang, Lu-Yi Yang, Shun-Ning Li, Feng Pan

Journal of Electrochemistry

Inorganic crystalline solid electrolytes exhibit exceptional room-temperature ionic conductivities, giving them the potential to enable all-solid-state lithium (Li) - ion batteries. Developing new high-performance electrolytes is one of the most critical challenges to realize solid-state batteries, which requires understanding how chemistry facilitates fast ionic conduction and what the Li-ion migration mechanism is in inorganic solid electrolytes. In this review, we aim to summarize recent fundamental research progress in Li-ion transport, including crystal structure, behavior of ion migration (i.e., single-ion jump and multi-ions cooperative migration), and the relationship between ion migration and microstructure.
Generally, ion transport in crystalline structure can be …

Design And Fabrication Of The Electrolytic Cell With Silicon-Based Boron-Doped Diamond Electrode And Its Feasibility ForIn-Situ Nuclear Magnetic Resonance Study, Hao Peng, Hui-Jun Sun, Zhi-You Zhou, Lin-Fan Shen, Long Huang, Shuo-Hui Cao, Shi-Gang Sun

Journal of Electrochemistry

In-situ EC-NMR technique can be used to monitor the electrochemical reaction process in real-time and to explain the reaction mechanism at the molecular level, which is a promising and non-destructive online detection technology. This article for the first time reports the design and production of in-situEC-NMR three-electrode single-chamber electrolytic cell using silicon-based boron-doped diamond (Si/BDD) as the working electrode. Research shows that the geometric size of Si/BDD electrode being 12.5 mm 1.2 mm 0.5 mm in the NMR detection zone is small and the thickness of the electrode material is thin, which accounts for the less hindrance …

Recent Advances In Glycerol Electrooxidation On Pt And Pd: From Reaction Mechanisms To Catalytic Materials, Wei-Yi Zhang, Xian-Yin Ma, Shou-Zhong Zou, Wen-Bin Cai

Journal of Electrochemistry

The conversion of glycerol to value-added products has received considerable attention recently because the booming biodiesel industry produces a large amount of glycerol as a byproduct. Among various means, electrocatalytic oxidation of glycerol is appealing owing to its environmental friendliness and high efficiency. However, electrooxidation of glycerol is very complex, involving multiple electron and proton transfer processes with many reaction pathways. How to rationally design catalysts with high selectivity toward targeted products is an overarching challenge, and of both fundamental and practical significance. In this minireview we aim to provide an overview of recent advancements in electrooxidation of glycerol focusing …

Modeling Of Bearing Voltage In Electric Machines Based On Electromagnetic Fea And Measured Bearing Capacitance, Peng Han, Greg Heins, Dean Patterson, Mark Theile, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Bearing voltages and associated bearing currents in electric machines driven by pulsewidth modulation converters with high switching frequencies and high dv/dt can cause premature bearing failures. This article proposes a new modeling approach for the prediction of steady-state and transient bearing voltages based on two-dimensional (2-D) electromagnetic finite element analysis with coupled external circuits using measured bearing capacitance values. The distributed-element external circuit was employed mainly to take into account the influence of wire distribution and frequency dependency, which are typically neglected by traditional equivalent circuits. The developed model was then used to simulate bearing voltages for various scenarios and …

Optimization For Variable Height Wind Farm Layout Model, Bin Xu, Jianming Zhu, Junzhe Wen, Shanshan Lin, Yunkai Zhao, Jin Qi, Yu Xue, Sichong Qin

Student Published Works

The optimization of wind farm layouts is very important for the effective utilization of wind resources. A fixed wind turbine hub height in the layout of wind farms leads to a low wind energy utilization and a higher LCOE (levelized cost of electricity). WOMH (Wind Farm Layout Optimization Model Considering Multiple Hub Heights) is proposed in this paper to tackle the above problem. This model is different from the traditional fixed hub height model, as it uses a variable height wind turbine. In WOMH, the Jensen wake and Weibull distribution are used to describe the wake effect on the …

Real Work With Real Consequences: Enlisting Community Energy Engineering As An Approach To Envisioning Engineering In Context, Michelle E. Jordan, Steve Zuiker, Wendy Wakefield, Mia Delarosa

Journal of Pre-College Engineering Education Research (J-PEER)

This study describes an illustrative case study from a year-round program that positions middle and high school youth to explore the social value of energy systems in their homes, schools, and neighborhoods. Designed to center existing youth assets, interests and values, Community Energy Engineering (CEE) frames engineering as a tool that students can enlist in order to understand and interrogate their local socio-energy system while also acting to transform it. CEE partners with Title 1 schools in Latino/a neighborhoods in the U.S. southwest. CEE situates youth community-based solar energy innovation projects as consequential, evolving in and with historically contingent engineering …

Optimal Capacitor Placement - A Bibliometric Survey, K V S Ramachandra Murthy, K Prabha Rani, Ramesh Adireddy, Nandan D.

Library Philosophy and Practice (e-journal)

In this paper, Bibliometric survey has been carried out on Optimal Capacitor Placement from 1981 to 2021. Scopus database has been used for the analysis. There were total 909 documents found on the topic of Optimal Capacitor placement. The statistical analysis is carried out source-wise, year-wise, area-wise, Country-wise, University wise, author-wise, and based on funding agency. Network analysis is also carried out based on Co-authorship, Co-occurrence, Citation Analysis and Bibliographic coupling. Results are presented. During 2016, there were 77 documents published which is the highest. International Journal of Electrical Power and Energy Systems of Elsevier has published 37 documents during …

The Effects Of The Transient And Performance Loss Rates On Pv Output Performance, Chibuisi Chinasaokwu Okorieimoh, Brian Norton, Michael Conlon

Conference papers

Solar photovoltaic (PV) panels experience long-term performance degradation as compared to their initial performance, resulting in lower like-per-like efficiencies and performance ratios. Manufacturers of solar photovoltaic modules normally guarantee a lifespan of more than 20 years. To meet such commitments, it is important to monitor and mitigate PV module degradation during this period, as well as beyond, to recognize maintenance and repair needs. Solar PV modules degrade over time, becoming less effective, less reliable, and eventually unusable. The effects of transient and performance loss rates on the output performance of polycrystalline silicon (p-Si) solar PV modules are the focus of …

Dc-Dc Buck Boost Converter Using The Lt8390 Controller And Gan High Electron Mobility Transistors, Juan Manuel Urbano Jr, Brian Thongchai Keokot

Electrical Engineering

California Polytechnic State University, San Luis Obispo’s ongoing Energy Harvesting from Exercise Machines (EHFEM) project creates a sustainable energy source by converting physical exercise from exercise machines into renewable electricity. Implementing energy harvesting technology into the Recreation Center’s exercise machines helps Cal Poly make progress on its goal of carbon neutrality by 2050 [1]. An improvement to the system with new technology increases Cal Poly Recreation Center’s ability to save money and improve sustainability.

The focus of this project improves the design of Nicholas Serres, who used the LT8390 controller in his buck boost DC-DC converter [2]. This project improves …

Wildfire Early Detection System (Weds), Mason Mciver, Vincent Liang, Jeanreno Racines

Electrical Engineering

With climate change causing an increase in temperature over the past several decades, wildfires have been burning hotter and moving quicker leaving a trail of destruction in their path. Detecting a wildfire early allows firefighters to respond efficiently and effectively to ensure containment. With the rise of advanced computer vision and algorithms, autonomous systems can be used to monitor and report any fire activity. Having multiple devices spread out across a large area will allow first responders to map out the fire location and track the fire. By utilizing smart technologies, property damage can be minimized and residents living in …

Miniaturized Ultraviolet Imager High Voltage Power Supply, Nicholas Palmer, Jason Thomas Heil

Electrical Engineering

Sending satellites into orbit becomes exponentially more expensive with weight and size, so designing high-voltage DC-DC converters that can achieve kilovolt level outputs in a small form factor is crucial to reducing costs. The Miniaturized Ultraviolet Imager (MUVI) aims to monitor Earth’s ionosphere and report weather patterns to climate scientists within a 2U cube satellite footprint. The imaging equipment consists of a microchannel plate and phosphor screen that require 2.5kV and 5.5kV respectively at microamp level currents. This report explains the implementation of a high voltage boost cascaded flyback converter to meet all of the MUVI satellite output voltage requirements. …

Zero Voltage Switching Hybrid Voltage Divider Converter, Timothy Jeong

Master's Theses

This project proposes a new hybrid voltage divider DC-DC converter that utilizes switching capacitors and inductors to produce zero voltage switching (ZVS) at the turn on state of its switches. By achieving ZVS, the switching losses are significantly reduced; thus, increasing the overall efficiency of the converter at various loads. The goal for this thesis is to perform analysis of the operation of the converter, derive equations for sizing the main components, and demonstrate its functionality through computer simulation and hardware prototype. Results of the simulation and hardware testing show that the proposed converter produces the desired output voltage while …

On The Design Of Coreless Permanent Magnet Machines For Electric Aircraft Propulsion, Damien Lawhorn, Peng Han, Donovin Lewis, Yaser Chulaee, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper presents design and prototyping studies for coreless and slotless permanent magnet (PM) machines, which have the potential for high power density and efficiency, and discusses their feasibility for electric aircraft propulsion. The emphasis is on axial flux permanent magnet (AFPM) machines with printed circuit board (PCB) stators that have advantages over their wired counterparts in terms of design flexibility, coil accuracy, manufacturing process reliability, and heat dissipation. Detailed electromagnetic finite element analysis models were developed and employed alongside analytical sizing equations to evaluate the performance of two dual-rotor single-stator coreless AFPM designs employing wave and spiral PCB winding …

Combined Use Of Ev Batteries And Pv Systems For Improving Building Resilience To Blackouts, Huangjie Gong, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Californian residencies face increased risk of blackout. The state depends more on imported electricity that may not always be available to fill the gap between renewable generation and demand. For buildings with PV panels, storing the surplus solar power to support the load during a blackout can be achieved with a large energy storage system (ESS). The electric vehicle (EV) provides potential solutions as it can expand the energy capacity of the residential ESS with its battery. In this paper, a reference house in California was modeled in EnergyPlus. The building resilience for a house with different load percentages were …

Manganese Oxide Carbon-Based Nanocomposite In Energy Storage Applications, Mulugeta Wayu

Chemistry Faculty Research

Global increasing demand in the need of energy leads to the development of non-conventional, high power energy sources. Supercapacitors (SCs) are one of the typical non-conventional energy storage devices which are based on the principle of electrochemical energy conversion. SCs are promising energy storage devices for better future energy technology. Increasing progress has been made in the development of applied and fundamental aspects of SCs. Manganese oxide electrode materials have been well studied; however, their capacitive performance is still inadequate for practical applications. Recent research is mainly focused on enhancing manganese oxide capacitive performance through the incorporation of electrically conductive …

Power Line Coupling Power Supply Design, Janine Gian Christii C. Darato, Jeni K. Kawate, Nicholas A. Marta

Electrical Engineering

In this project, a power supply was designed for a startup company, Perch Sensing, to detect wildfires with the use of distributed sensors across power lines. The purpose of the power supply is to provide 15W of power to a microcontroller, which controls the sensor nodes. The power supply hangs from power lines and draws energy by inductively coupling to these lines. Our design starts with a current transformer that steps down the current from the power line, which is fed into a shunting mechanism as a safety precaution when the load is absent, then to the power supply itself. …

Buck Converter With Voltage Foldback Protection, Fabian Aaron Enriquez, Pedro Rincon Rosales

Electrical Engineering

In this work, we implemented the idea of current foldback protection onto a buck converter. Current foldback protection essentially helps reduce the power dissipation which may be caused by a short circuit or overload scenario. To achieve the goal of this project, we used a combination of comparators, operational amplifiers and MOSFETs to create a current foldback sub controller. This controller would then serve as a feedback device between the output of the converter and the main controller to detect if a fault condition has occurred. Following the design, we performed simulation of the current foldback controller using PSpice and …

Solar Pv Emulator, Tristan Studer, Cody Kremer

Electrical Engineering

The implementation of a solar PV emulator. Creating a controllable testing environment which sufficiently recreates realistic conditions a photovoltaic cell would experience in real world use. The project aims to accurately show the efficiency and reliability of a solar PV cell, opposed to an ideal model which creates unrealistic expectations. The PV emulator implements conditions such as: irradiance, soiling and temperate changes. It gives feedback on a displayed IV curve and/or PV curve so the user may graphically analyze the output their PV cell produces given various conditions. It allows the user selectable conditions the solar cell may experience this …

Solar Photovoltaic Iv Curve Tracer, Jonathan W. Skelly

Electrical Engineering

The Solar Photovoltaic Current-Voltage (IV) Curve Tracer, sponsored by Cal Poly Professor Dale Dolan, characterizes solar array current vs. voltage curves for any given temperature and irradiance. The curve tracer is battery powered, and functions autonomously across loading conditions from short circuit to open load on any sub-450-watt solar array. The curve tracer supports separate data logging modes for both single cells and single modules to maximize data accuracy for each. For testing full strings of solar panels, up to 10 IV curves may be stored in persistent EEPROM memory. Stored data may be recalled later for output to a …