Power and Energy Commons^™

Hosting A Community-Based Local Electricity Market In A Residential Network, Aziz Saif, Shafi K. Khadem, Michael Conlon, Brian Norton

Articles

This paper presents the potential of building a local electricity market (LEM) to boost the deployment of the local energy communities, centred around active customers with distributed energy resources (DERs). To conduct a comprehensive and detailed study on different cases with reduced computational burdens, this paper adopts a simplified modelling approach where the market and network model simulations are performed in a cascaded, decoupled fashion. This allows achieving the optimal LEM output for the energy community with different DER assets that are not bounded by the network constraints. The investigation involves quantifying the benefits brought by LEM to energy communities …

Hosting A Community-Based Local Electricity Market In A Residential Network, Aziz Saif, Shafi K. Khadem, Michael Conlon, Brian Norton

Articles

This paper presents the potential of building a local electricity market (LEM) to boost the deployment of the local energy communities, centred around active customers with distributed energy resources (DERs). To conduct a comprehensive and detailed study on different cases with reduced computational burdens, this paper adopts a simplified modelling approach where the market and network model simulations are performed in a cascaded, decoupled fashion. This allows achieving the optimal LEM output for the energy community with different DER assets that are not bounded by the network constraints. The investigation involves quantifying the benefits brought by LEM to energy communities …

Modeling, Simulation, And Hardware-In-The-Loop Implementation Of Distributed Voltage Control In Power Systems With Renewable Energy Sources, Ali Dehghan Banadaki

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation develops and analyzes distributed controllers for power systems with renewable energy sources. A comprehensive state space modeling of voltage source inverters (VSIs) is developed specifically to address the secondary voltage control. This model can be used for simulation and control design. Unlike frequency, voltage is a local phenomenon, meaning that it cannot be controlled from a far distance. Therefore, a voltage zoning matrix that relates the sensitivity of the loads to the sources is proposed. The secondary voltage control is designed by applying the eigenvalue decomposition of the voltage zoning matrix to obtain the reference generators voltages. The …

Optimal Sizing And Energy Scheduling Of Grid-Supplemented Solar Pv Systems With Battery Storage: Sensitivity Of Reliability And Financial Constraints, Aakash Hassan, Yasir M. Al-Abdeli, Martin Masek, Octavian Bass

Research outputs 2022 to 2026

Establishing reliable, clean, and inexpensive solar PV systems is a complex interplay between the level of reliability (LPSP), financial constraints, and CO2 emissions. This paper investigates the impact of these factors on stand-alone (SA) and grid-supplemented (GS) solar PV systems over multiple seasons. The research uses established hardware models, detailed power management strategies as well as realistic Australian grid tariffs and Genetic Algorithms to find the minimum Cost of Energy (COE) subject to LPSP and financial constraints. The developed power management strategies are also tested experimentally on a real solar PV system. The results indicate that the grid-supplemented system yields …

Study Of Electric Vehicle Smart Charging And Energy Management For Vehicle-Grid Integration Systems, Zhouquan Wu

Dissertations, Master's Theses and Master's Reports

The emerging need of building an efficient Electric Vehicle (EV) charging infrastructure requires the investigation of all aspects of Vehicle-Grid Integration (VGI). This dissertation studies the optimal EV charging control and energy management of VGI system to address the economic benefits of EV charging customers and operation stability of distribution power grids. First of all, a centralized EV charging control method is developed under the transactive energy environment to minimize the EV charging cost and avoid the distribution power grid overloading. The quadratic programming is used to obtain optimized charging control actions. Case studies with hundreds of EVs are conducted …

Hardware In The Loop Implementation And Simulations Of A Wave Energy Converter Using Typhoon Hil And Speedgoat, Pranav Nair

Dissertations, Master's Theses and Master's Reports

Several studies have indicated that electricity production is the prime source of greenhouse emissions, more than flying and driving combined. Hence, over the past few decades, there has been a significant rise in the need for clean energy to achieve the targets in emissions reduction. It has been observed that the share of renewable energy sources in the percentage of total electricity production is rising, but, according to climate experts, the transition needs to speed up. Hence, it is significant to study and develop underutilized renewable energy sources.

One of these underutilized renewable energy sources is wave energy. It has …

Self-Oscillating Induction Heater, Patrick Rice

Dissertations, Master's Theses and Master's Reports

This report develops a control system to keep an induction heater in resonance. When a metallic workpiece is inserted in the air core of the workcoil, the resonant frequency changes. Different workpiece materials affect the resonant frequency and power. This presents a problem since changing the resonant frequency of the circuit while keeping the frequency constant reduces the maximum power of the circuit. Finite element analysis is used to find the circuit parameters of the workcoil and workpiece interaction. A non-linear controller which oscillates based on the resonant frequency of an LC tank is created. Nyquist and describing function analysis …

Empirical Comparison Of Machine Learning Methods For Wind Power Predictions, Sidny M. Stewart

EWU Masters Thesis Collection

No abstract provided.

Modeling Of Inverter-Based Microgrid For Small-Signal And Large-Signal Stability Analysis, Vishal Verma

Graduate Theses, Dissertations, and Problem Reports (ETD)

Integration of inverter-based resources (IBRs) such as solar photovoltaic, wind, and battery storage, is both a boon and a bane for electric power systems. On one hand, IBRs have helped in making electrical energy a clean (carbon-free) source of energy. On other hand, the dynamics of IBRs have changed the way power system studies have been carried out. With the advantages IBRs offer over conventional resources, it is assumed that a small distribution power system (microgrid) will have a 100% IBRs penetration in the future. Such a microgrid can operate in grid-connected mode or in an islanded mode. Both modes …

An Efficient Ar Model-Based Method For The Detection Of Forced Oscillations In Power Networks: Implementation And Analysis, Maria Waleska Suarez

Graduate Theses, Dissertations, and Problem Reports (ETD)

An active research topic is the detection of various oscillations that may lead to instability and potential disruption in the operation of a power network. Forced Oscillations (FOs) play a unique role in power system stability among various oscillations. They are perturbances that change the system’s state and are caused for many reasons, including but not limited to persistent load changes and oscillatory load or generation, fault, triplane, and other mechanical anomalies. These factors can hugely affect the power grid by either increasing or decreasing the amplitude, causing corrupt modes leading to blackouts, affecting the equipment involved, delivering poor power …

Fabrication Of Piezoelectric Field Effect Transistors For Acoustic Signal Detection, Luke Minks

Electronic Theses and Dissertations, 2020-2023

In this study, a standard bulk FET design is fabricated with a piezoelectric gate, allowing a microwave-frequency voltage signal to be transmitted from a transducer to the transistor via acoustic conduction through the substrate. Using a single polycrystalline aluminum nitride film as the piezoelectric material, microwave-frequency piezoelectric transducers were fabricated in parallel with piezoelectric FETs. These device pairs function by generating high frequency acoustic waves in the substrate via application of AC voltage to the transducers; the transistors then recover these signals by detecting these waves in their gates via the piezoelectric film, reproducing an attenuated version of the original …

Search Space Reduction Techniques For Solution Of Combinatorial Optimization Problems In Power System., Ranadhir Sarkar

Electronic Theses and Dissertations, 2020-2023

Power system is vulnerable to disastrous climate events due to sequential or successive equipment failure. In this dissertation, the problem of identifying the critical k-transmission lines that fail one after another in quick succession, and the distribution system restoration problem using tie-lines/sectionalizing switches formulated as a mixed-integer non-linear programming problem (MINLP) that determines load shed under various k-line removal scenarios are solved. These problems are combinatorial that have huge search space, and solution through enumeration is intractable for large power systems. For reduction of search space, the following mathematical tools are derived, (i) two power flow methods due to k-transmission …

Experimental And Computational Studies Of Functionalized Carbon Nanotubes For Use In Energy Storage Devices And Membranes, Emine S. Karaman

Dissertations

Electrolytes with good interfacial stability are a crucial component of any electrochemical device. The development of novel gel polymer electrolytes (GEs) with good interface stability and better manufacturability is important for the development of the next generation electrochemical devices. Gel electrolytes are hybrid electrolyte materials, combining benefits of both liquid and solid systems. Compared with liquid and solid electrolytes, GEs open new design opportunities and do not require rigorous encapsulation methods. In this dissertation, studies on functionalized carbon nanotubes (fCNTs) and graphene oxide (GO) doped polyvinyl alcohol (PVA) based gel electrolytes (GEs) are reported. The ionic conductivity and mechanical strength …

Stability Analysis Of Dc Microgrid With Constant Power Load, Sarah Ansari

Theses and Dissertations

Development towards sustainability has led to an increase in the integration of various distributed generation (DG) units like renewable sources of energy, energy storage systems (ESS). In order to counteract the challenges, caused due to integration of DG units into conventional power systems, the concept of DC microgrid (DCMG) has been introduced. DCMGs have power converters that are present on the source side and load side of the DCMGs. The power converters at the load side when tightly regulated behave as constant power loads (CPLs). There are stability issues pertaining to the inherent non-linear characteristic of the ideal CPLs because …

Nitrogen-Sulfur Co-Doped Porous Carbon Preparation And Its Application In Lithium-Sulfur Batteries, Gui-Xiang Zhao, Wail Hafiz Zaki Ahmed, Fu-Liang Zhu

Journal of Electrochemistry

In recent years, lithium-sulfur (Li-S) batteries have been considered as a promising candidate for the next generation of energy storage system due to their ultrahigh theoretical capacity (1675 mAh·g^-1) and energy density (2600 Wh·kg^-1). However, the practical application of Li-S batteries is seriously limited by their insulating nature of sulfur, the shuttle effect of polysulfides (LiPSs), and volume expansion during charging and discharging. To overcome those disadvantages, one of the commonly methods is to infiltrate sulfur into porous conductive carbon framework, such as porous carbon, hollow carbon spheres, graphene, carbon nanotubes and some composites of the …

Photoelectrochemical Sensing Based On Zr-Mofs For Homocysteine Detection, Wen-Xia Dong, Guang-Ming Wen, Bin Liu, Zhong-Ping Li

Journal of Electrochemistry

Due to the independent form of the light source and detection system, photoelectrochemical (PEC) sensor has the advantages of low background, high sensitivity and simple operation. So far, PEC systems have been widely used in the fields including the actual detection of metal ions, biological antibodies or antigens in environmental pollutants. When the photosensitive material is irradiated by a light source with an energy being equal to or greater than its band gap, electrons (e^-) transition occurs from the valence band to the conduction band, leaving a hole (h⁺), at the same time, the generated electron-hole …

Structure Analysis Of Pemfc Cathode Catalyst Layer, Rui-Qing Wang, Sheng Sui

Journal of Electrochemistry

The sluggish oxygen reduction reaction (ORR) on the cathode of the proton exchange membrane fuel cell (PEMFC) has always been one of the key factors limiting its commercialization. The optimization of the cathode catalytic layer structure plays an important role in improving fuel cell performance and reducing production costs. In this paper, two different catalysts (platinum nanoparticles (Pt-NPs) and platinum nanowires (Pt-NWs)) were prepared by using catalyst coated substrate (CCS) method. By constructing a double-layer catalytic layer structure, we analyzed the effect of different catalytic layer structures by performing a single cell test. The results showed that the dense platinum …

Cyclic Voltammetric Simulations On Batteries With Porous Electrodes, Xue-Fan Cai, Sheng Sun

Journal of Electrochemistry

Lithium-ion batteries (LIBs) are among the most widely used energy storage devices. Whole-cell modeling and simulations of LIBs can optimize the design of batteries with lower costs and higher speeds. The Pseudo-Two-Dimensional (P2D) electrochemical model is among the most famous whole-cell models and widely applied in LIB simulations. P2D model consists of a series of kinetic equations to model Li⁺/Li diffusion in working/counter electrodes and electrolytes, which are filled in the porous electrodes and separator, and reactions at the interface of electrolyte and active particles. The traditional applications of P2D model, however, are limited to the cases where …

Functional Sulfate Electrolytes Enable The Enhanced Cycling Stability Of Nati2(Po4)3/C Anode Material For Aqueous Sodium-Ion Batteries, Shu-Jin Li, Zhi-Kang Cao, Wen-Kai Wang, Xiao-Han Zhang, Xing-De Xiang

Journal of Electrochemistry

Aqueous sodium-ion batteries show promising application in fields of large-scale storage of intermittent renewable energies owing to the earth-abundant sodium resources and incombustible aqueous electrolytes. Primary factors determining whether they can be commercially utilized are low cost and long lifetime. Among current electrode materials, NASICON-type NaTi₂(PO₄)₃ arouses wide interests as an anode material for aqueous sodium-ion batteries as it offers a high specific capacity, fast Na-transport ability and reasonable working potential, however, suffering from insufficient cycling performance caused by severe dissolution of active materials in traditional aqueous electrolytes. In this work, a functional sulfate electrolyte …

Influence Of Heat Treatment Time On Cathode Material Cr8O21 For Lithium Battery, Jiu-Kang Teng, Qing-Jie Wang, Liang Zhang, Hong-Mei Zhang, Xiao-Tao Chen, Peng Zhang, Jin-Bao Zhao

Journal of Electrochemistry

Chromium oxide (Cr₈O₂₁) cathode material for lithium batteries was synthesized by thermal decomposition of chromium trioxide (CrO₃) at high temperature. The electrochemical properties of chromium oxide depended on the time and temperature during the heat treatment. Pure phase chromium oxide was prepared, and the effects of heat treatment time on the structures and electrochemical properties of Cr₈O₂₁ were systematically studied. The first discharge mechanism of chromium oxide in lithium batteries was explored, and the results were similar to that in lithium-sulfur batteries. The crystal phases and electrochemical properties of the prepared …