Creation And Fill Of An Eocene Incision On A Leeward Margin Of An Isolated Carbonate Platform, Northeast Sirte Basin, Libya,
2024
Missouri University of Science and Technology
Creation And Fill Of An Eocene Incision On A Leeward Margin Of An Isolated Carbonate Platform, Northeast Sirte Basin, Libya, Muneer Abdalla, Wan Yang, Abdlsaid Ibrahem, Salah Hassan, Alzobeere Bogzil
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The recognition of incised valleys and the reconstruction of their filling history are significant for defining unconformity surfaces and their stratigraphic framework, particularly when detailed petrographic data are missing. However, little of such research is published so far on the characterization and factors influencing the development of incised valleys using three-dimensional seismic and well data. Thus, this work aims to examine and analyze the geometry and factors controlling the formation and sediments filling of an eocene incised valley in a sequence stratigraphic frame using an integration of three-dimensional seismic and well data from ne sirte basin, libya. The eocene incised …
Lithospheric Evolution Of The South-Central United States Constrained By Joint Inversion Of Receiver Functions And Surface Wave Dispersion,
2024
Missouri University of Science and Technology
Lithospheric Evolution Of The South-Central United States Constrained By Joint Inversion Of Receiver Functions And Surface Wave Dispersion, Tuo Wang, Stephen S. Gao, Kelly H. Liu, Kevin L. Mickus, Ling Chen
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
In the present study, we use broadband seismic data recorded by 190 stations of the EarthScope program's Transportable Array to construct a 3-D shear wave velocity model for the upper 180 km using a non-linear Bayesian Monte-Carlo joint inversion of receiver functions (RFs) and Rayleigh wave dispersion curves. Ambient noise and teleseismic data are used for obtaining Rayleigh wave phase velocity dispersion curves. A resonance removal filtering technique is applied to the RFs contaminated by reverberations from the thick sedimentary layers that cover most of the region. Our observations of the higher crustal shear velocities (∼3.40 km/s) beneath the Sabine …
A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories,
2024
Missouri University of Science and Technology
A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-Based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. the new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …
A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories,
2024
Missouri University of Science and Technology
A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. The new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …
Development Of Agar-Based Preformed Particle Gel For Water Control In High-Salinity Reservoirs,
2024
Missouri University of Science and Technology
Development Of Agar-Based Preformed Particle Gel For Water Control In High-Salinity Reservoirs, Ahmed Ben Ali, Reem Elaf, Abdulaziz A. Almakimi, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Oil Extraction Faces Challenges in Cost and Complexity Due to Excessive Water Production, Leading to Diminished Hydrocarbon Recovery. Preformed Particle Gels (PPGs) Hold Promise for Enhancing Oil Recovery and Sealing High-Permeability or Fractured Zones. However, Current PPGs Encounter Limitations in High-Temperature Reservoirs, Including Salt Sensitivity and Potential Hazards. to Address These Issues, We Propose Eco-Friendly PPGs Utilizing Agar Polysaccharides. Agar Backbones Grafted with Acrylamide (AM) and AM/N,N′-Methylenebis(AM) (MBA) Via Microwave-Assisted Techniques Resulted in Polyacrylamide Grafted Agar (Ag/PAM) and Cross-Linked Polyacrylamide Grafted Agar (Ag/PAMBA). Various Sizes (75 Μm to 1.18 Mm) Were Prepared to Accommodate Diverse Reservoir Porosities and Ensure Effective …
A Computational Investigation Into Thermo-Kinetic Parameters Governing The Decomposition Of Bio-Oil Model Compounds,
2024
United Arab Emirates University
A Computational Investigation Into Thermo-Kinetic Parameters Governing The Decomposition Of Bio-Oil Model Compounds, Ali Huseein Aljefri
Theses
Among notable products from thermal degradation of biomass are simple oxygen-containing aromatics. These compounds typically appear in high loads in collected bio-oil derived from biomass. As such, it is important to comprehend the decomposition chemistry of this category of compounds. This thesis takes on board a general approach to report thermo-kinetic parameters that govern decomposition of a selected set of bio-oil model compounds in two distinct systems: firstly radical-derived pathways in the gas phase and secondly thermal degradation in their condensed media. The first is attained through accurate density functional calculations while the second is accomplished through the use of …
Valorization Of Date Palm Waste For The Isolation, Characterization, And Surface Chemistry Modification Of Nanocellulose,
2024
United Arab Emirates University
Valorization Of Date Palm Waste For The Isolation, Characterization, And Surface Chemistry Modification Of Nanocellulose, Mohsin Raza
Dissertations
This dissertation focuses on the utilization of date palm waste, a lignocellulosic material, as a source for the extraction of nanocellulose (NC), a versatile biopolymer with applications in biodegradable composites, bioplastics, and food packaging. Conventional methods of NC production using mineral acids such as sulphuric and hydrochloric acid are reaching their limits of toxicity, so more environmentally friendly alternatives such as ionic liquids (ILs) are being explored. The research focuses on the characterization of different date palm wastes to evaluate their α−cellulose content, lignocellulosic character, and thermal stability. By comparing extraction methods with mineral acids and ILs, the study evaluates …
A Tilted Broad Plume Underneath The Greenland Cratonic Keels,
2024
Missouri University of Science and Technology
A Tilted Broad Plume Underneath The Greenland Cratonic Keels, Dan Wang, Stephen S. Gao, Yangyang Liao, Kelly H. Liu
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
To advance our comprehension of the complex geological history and mantle dynamics in the north atlantic region, we employ all available broadband seismic data recorded in greenland to reveal an abnormal mantle transition zone (mtz) structure. Central and eastern greenland exhibits depressed 410 and 660 km discontinuities (d410 and d660, respectively) bordering the mtz, indicative of a substantial thermal anomaly associated with an underlying plume, surpassing the 1,800°c threshold for post-garnet phase transitions at the d660. Variations in mtz thickness across greenland stem from differing temperature anomalies at the d410 and d660, possibly linked to a tilted plume within the …
Improved Modeling And Application Of Data Assimilation In Gas Influx Management During Managed Pressure Drilling,
2024
Louisiana State University and Agricultural and Mechanical College
Improved Modeling And Application Of Data Assimilation In Gas Influx Management During Managed Pressure Drilling, Chen Wei
LSU Doctoral Dissertations
The management of gas influxes in a drilling well has been considered one of the most critical topics for maintaining petroleum drilling safety and efficiency. Reliable modeling of gas influx behaviors in a wellbore or a marine riser greatly benefits the improved understanding of a gas kick event and the development of optimized influx management strategies. However, the current studies on transient multiphase flow modeling show varying limitations on both the model rigorousness and the overall numerical efficiency. Meanwhile, the existence of great system uncertainties, such as the unclear influx sizes and distributions in the well/riser, has brought significant challenges …
Well Log Analysis And Interpretation For Mishrif Formation For Amarah Oil Field,
2024
The British University in Egypt
Well Log Analysis And Interpretation For Mishrif Formation For Amarah Oil Field, Attia Attia, Ayat Ahmed Jasim, Aqeel Al-Adili, Luma Mahmoud, Mohamed Mansour Eng.
Petroleum Engineering and Gas
This study is intended to interpret of well logs for the purpose of determining petrophysical parameters for Mishrif formation in the Amarah Oil Field. This fi eld is situated in the province of Mysan ten kilometers to the southwest of Amarah and ten kilometers to the northwest of Halafaya’s fi eld, and is located southeast of the fi eld of Kamit and about 30 km. M–N cross plot as well as the Matrix Identifi cation (MID) have been applied to calculate mineralogy and lithology of the formation using well logs, cross plots, and reservoir quality index (RQI) along with fl …
Seismicity Characteristics Of The Gulf Of Aqaba Seismogenic Zone And Their Hazard Implications In Northwestern Saudi Arabia,
2024
Missouri University of Science and Technology
Seismicity Characteristics Of The Gulf Of Aqaba Seismogenic Zone And Their Hazard Implications In Northwestern Saudi Arabia, Ali Abdelfattah, Mohamed Ezzelarab, Hazem Badreldin, Hassan Alzahrani, Saleh Qaysi, Bassam Abuamarah, Neil Lennart Anderson
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The seismogenic characteristics of the Gulf of Aqaba zone have been assessed using the maximum likelihood method to estimate various earthquake recurrence parameters. These parameters encompass the β-value, annual recurrence rate (λ), and maximum probable magnitude (Mmax). This assessment has identified three sub-seismogenic zones, each corresponding to specific structural faults within the Gulf. These zones are associated with the Aragonese, Arnona and Aqaba faults, delineating pull-apart basin structures in the Gulf of Aqaba. An updated earthquake catalogue has been compiled using a unified moment magnitude (Mw) scale to improve the analysis, established by developing two empirical relationships. According to the …
Valorization Of The Polymeric Constituents In Plastic Wastes Through Thermo-Chemical Processes By Using Viable Metal Oxides Additives,
2024
United Arab Emirates University
Valorization Of The Polymeric Constituents In Plastic Wastes Through Thermo-Chemical Processes By Using Viable Metal Oxides Additives, Labeeb Hamad Ali
Dissertations
The rapid accumulation of different types of plastic waste necessitates the development of effective and economically viable waste management operations. Such a process should ideally not only mitigate associated environmental burdens but also recycle and recover value-added products. Through incineration or pyrolysis, thermal processing has emerged as a mainstream approach to waste management of the ever-increasing loads of different categorized plastic wastes. Throughout the work of the thesis, we have utilized a multitude of complementary techniques spanning material characterizations, catalysis, kinetic modelling, and density functional theory (DFT) to comprehend the complex chemistry that underpins catalytic chemical recycling of plastic wastes. …
Formate Dehydrogenase Immobilized On Metal Organic Framework For Enhanced Conversion Of Co2 To Formate,
2024
United Arab Emirates University
Formate Dehydrogenase Immobilized On Metal Organic Framework For Enhanced Conversion Of Co2 To Formate, Shadeera Rouf
Dissertations
Enzymatic hydrogenation of carbon dioxide (CO2) to formate by formate dehydrogenase (FDH) is a promising technology for reducing CO2 concentrations in an environmentally friendly manner. For practical and economical implementation of the process, however, enhanced reusability of the enzyme is essential, which requires easy separation from the reaction mixture, coupled with sustained stability. One way to achieve this is by using the enzyme in an immobilized form. In this work, the effectiveness of using different metal organic frameworks (MOFs) as promising alternative supports for FDH immobilization has been assessed. A highly stable zirconium-based MOF, UiO66 and its …
Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions,
2024
Faculty of Engineering, Tanta University
Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr
Journal of Engineering Research
Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …
Investigation Of Gas Dynamics In Water And Oil-Based Muds Using Das, Dts, And Dss Measurements,
2024
Louisiana State University at Baton Rouge
Investigation Of Gas Dynamics In Water And Oil-Based Muds Using Das, Dts, And Dss Measurements, Temitayo S. Adeyemi
LSU Master's Theses
Reliable prediction of gas migration velocity, void fraction, and length of gas-affected region in water and oil-based muds is essential for effective planning, control, and optimization of drilling operations. However, there is a gap in our understanding of gas behavior and dynamics in water and oil-based muds. This is a consequence of the use of experimental systems that are not representative of field-scale conditions. This study seeks to bridge the gap via the well-scale deployment of distributed fiber-optic sensors for real-time monitoring of gas behavior and dynamics in water and oil-based mud. The aforementioned parameters were estimated in real-time using …
Understanding Effective Elastic Properties And Stress-Strain Evolution In Composite Granular Rocks Using Discrete Element Modeling,
2024
University of North Dakota
Understanding Effective Elastic Properties And Stress-Strain Evolution In Composite Granular Rocks Using Discrete Element Modeling, Prasad Pothana, Fernando E. Garcia, Kegang Ling
Petroleum Engineering Posters and Presentations
The mechanical behavior of composite granular rocks is a multifaceted phenomenon relevant to various geoengineering applications. Traditional homogenization models and continuum mechanics-based numerical methods often fall short of accurately capturing the intricacies of granular materials. Granular materials exhibit heterogeneity and arching mechanisms governing the force networks that ensure system stability. Unlike continuum-based approaches, particulate discrete element methods have an advantage in assessing effective material properties by considering material heterogeneity and grain-level physical interactions. This study evaluates effective elastic properties using particle flow code using flat-joint contact law for composite binary mixtures with a stiff inclusion embedded within a matrix material. …
New Models For Estimating Minimum Miscibility Pressure Of Pure And Impure Carbon Dioxide Using Artificial Intelligence Techniques,
2024
The British University in Egypt
New Models For Estimating Minimum Miscibility Pressure Of Pure And Impure Carbon Dioxide Using Artificial Intelligence Techniques, Attia Attia, Ahmed Ashraf Soliman Eng., John Shahat Eng., Sayed Gomaa Prof., Fares Ashraf El Salamony Prof.
Petroleum Engineering and Gas
CO2 miscible flooding stands out as one of the most-commonly employed and promising processes in enhanced oil recovery. The key factor for ensuring success in designing and executing CO2 injection projects lies in the precise determination of the Minimum Miscibility Pressure (MMP). Despite significant research endeavors in measuring and predicting the MMP through the use of empirical, analytical, numerical, and experimental approaches, the need for a comprehensive, accurate, efficient, and easy-to-use model remains. In response to this gap, our study developed various predictive models with 205 datasets, including well-established ones such as Artificial Neural Network (ANN), Random Forest (RF), and …
Laboratory Evaluation Of High-Temperature Resistant Lysine-Based Polymer Gel Systems For Leakage Control,
2024
Missouri University of Science and Technology
Laboratory Evaluation Of High-Temperature Resistant Lysine-Based Polymer Gel Systems For Leakage Control, Tao Song, Xuyang Tian, Baojun Bai, Yugandhara Eriyagama, Mohamed Ahdaya, Adel Alotibi, Thomas P. Schuman
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
In-situ crosslinking gel known for its cost-effectiveness, has been employed for decades to plug high-permeability features in subsurface environments. However, some commonly used crosslinkers are being phased out due to the increasingly rigorous environmental regulations. As a newly discovered environmentally friendly crosslinker, lysine can crosslink the partially hydrolyzed polyacrylamide through transamidation reaction. The present work aimed to study the effect of polymer composition and concentration on the gelation behavior of lysine and high molecular weight acrylamide-based polymers. Several commercial high molecular weight polymers with different contents of 2-Acrylamido-2-methyl-1-propane sulfonic acid (AMPS) including AN-105/125, SAV-55/37/28, and SAV-10 were deployed in this …
Layered Mantle Flow Field Associated With Plate Kinematics And Slab Modulation Underneath The Horseshoe-Shaped Banda Arc-Islands,
2024
Missouri University of Science and Technology
Layered Mantle Flow Field Associated With Plate Kinematics And Slab Modulation Underneath The Horseshoe-Shaped Banda Arc-Islands, Sijia Li, Fansheng Kong, Kelly H. Liu, Stephen S. Gao
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The Banda Arc-Continent Collision Zone Signifies One Of The Most Seismically Active And Tectonically Intricate Zones. The High Convergence Rate Across The Region, Coupled With The Exceptionally Arcuate Arc And Subducted Slab, Makes It An Ideal Locale For Investigating Interactions Between Plate (Slab) Kinematics And Plastic Flow In The Asthenosphere, Which Can Be Diagnosed By Seismic Anisotropy From Shear Wave Splitting Analyses. In Total, 206 Pairs Of Splitting Measurements Using Teleseismic SKS, SKKS, And PKS, Along With 43 Pairs Using Local S Phases, Are Obtained By Utilizing Broadband Seismic Data From Five Permanent Seismic Stations. To Reduce The Ambiguity In …
Inverting Geodetic Strain Rates For Slip Deficit Rate In Complex Deforming Zones: An Application To The New Zealand Plate Boundary,
2024
Missouri University of Science and Technology
Inverting Geodetic Strain Rates For Slip Deficit Rate In Complex Deforming Zones: An Application To The New Zealand Plate Boundary, Kaj M. Johnson, Laura M. Wallace, Jeremy Maurer, Ian Hamling, Charles Williams, Chris Rollins, Matt Gerstenberger, Russ Van Dissen
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The potential for future earthquakes on faults is often inferred from inversions of geodetically derived surface velocities for locking on faults using kinematic models such as block models. This can be challenging in complex deforming zones with many closely spaced faults or where deformation is not readily described with block motions. Furthermore, surface strain rates are more directly related to coupling on faults than surface velocities. We present a methodology for estimating slip deficit rate directly from strain rate and apply it to New Zealand for the purpose of incorporating geodetic data in the 2022 revision of the New Zealand …
