Petroleum Engineering Commons^™

Commercialization Of Cobalt Promoted Molybdenum Disulfide Hydrodesulfurization Unsupported Catalyst, Juan Hilario Leal

Open Access Theses & Dissertations

Catalysis is a key player in the petroleum refining process. Our focus is primarily on the improvement of a commercial HDS (HydroDeSulfurization) hydrotreating catalyst. The commercial catalyst sold today is cobalt promoted molybdenum supported on γ-alumina. Our aim is to work with Porocel Industries LLC to produce an unsupported, cobalt promoted, molybdenum disulfide catalyst by improving on previous work conducted by Dr. Brenda Torres. The catalysts (B3&B5) developed by Dr. Torres were reported to be highly active on real feedstocks and were produced via hydrothermal process. Oxidic Mo, and H2S were used to make an ammonium tetrathiomolybdate precursor that was …

High-Temperature, High-Pressure Viscosities And Densities Of Toluene, Aaron J. Rowane

Theses and Dissertations

High-temperature, high-pressure (HTHP) conditions are exemplified in ultra-deep petroleum reservoirs and can be exhibited within diesel engines. Accurate pure component hydrocarbon data is essential in understanding the overall behavior of petroleum and diesel fuel at these conditions. The present study focuses on the HTHP properties of toluene since this hydrocarbon is frequently used to increase the octane rating of gasoline and toluene occurs naturally in crude oil. In this thesis experimental densities and viscosity are presented to 535 K and 300 MPa extending the database of toluene viscosity data to higher temperature than previous studies. The data is correlated to …

Bioluminescent Magnetic Nanoparticles As Potential Imaging Agents For Mammalian Spermatozoa, Erick Salvador Vasquez, Jean M. Feugang, Scott T. Willard, Peter L. Ryan, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

Background: Nanoparticles have emerged as key materials for developing applications in nanomedicine, nanobiotechnology, bioimaging and theranostics. Existing bioimaging technologies include bioluminescent resonance energy transfer-conjugated quantum dots (BRET-QDs). Despite the current use of BRET-QDs for bioimaging, there are strong concerns about QD nanocomposites containing cadmium which exhibits potential cellular toxicity.

Results: In this study, bioluminescent composites comprised of magnetic nanoparticles and firefly luciferase (Photinus pyralis) are examined as potential light-emitting agents for imaging, detection, and tracking mammalian spermatozoa. Characterization was carried out using infrared spectroscopy, TEM and cryo-TEM imaging, and ζ-potential measurements to demonstrate the successful preparation of these nanocomposites. Binding …

A Numerical Investigation Of Wellbore Stability Problems Using An Elastoplastic Model, Chang Huang

LSU Master's Theses

Wellbore stability analysis acts an important role in the drilling design to avoid pipe-stuck, lost circulation and the other instability-induced problems. However, the conventional linear elastic model used by the industry is too conservative in predicting the mud weight window. This project is aimed at improving the accuracy of wellbore stability analysis. An elastoplastic model with Drucker-Prager yield criterion featured by strain hardening is proposed to characterize the rock behavior. Object-oriented finite element analysis simulator, NSMOOM, is programmed in MATLAB. The simulator is verified with the analytical solution in the elastic domain and with the commercial software ABAQUS in the …

Simulation Studies For Relative Importance Of Unconventional Reservoir Subgrid Scale Physics Parameters, Yaakoub Youssef El Khamra

LSU Doctoral Dissertations

In this endeavor we attempt to better understand gas transport in shale gas reservoirs, specifically the impact and effects of different physical phenomena. We start by documenting the nature of the reservoirs and the need for accurate modeling of various physical phenomena in multiple interconnected continua. The physical phenomena of interest include non-linear Forchheimer flow, Knudsen diffusion in the form of slip "Klinkenberg" flow and adsorption/desorption. The numerical methods used in the reservoir simulator are also introduced, along with a derivation of the main equations used. Various verification and validation results are compared against manufactured and analytical solutions and finally …

Modeling Explosive Lensing On A Cylindrical Body In Air: A First Step Towards Sealing An Underwater Offshore Oil Spill, Phillip R. Mulligan

Doctoral Dissertations

"In 2010, the British Petroleum (BP) Deepwater Horizon accident leaked oil into the Gulf of Mexico for 87 days. A fast response method that can seal an oil pipe and stop the release of oil is needed in order to prevent future oil leaks from turning into ecological and financial disasters. Explosives can serve this need.

This research examined how a circular implosive discontinuous explosive lens interacts with a cylindrical surface. The following research was designed to study the applicability of the Method this author developed to predict the peak pressure from multiple shockwaves converging on a centrally located cylinder. …

Modeling Churn And Annular Flow Regimes In Vertical And Near-Vertical Pipes With Small And Large Diameters, Erika Viana Pagan

LSU Master's Theses

This thesis presents an improved model for gas-liquid two-phase flow in churn and annular flow regimes for small- and large-diameter in vertical and near-vertical pipes. This new model assumes that a net liquid film moves upward along the pipe wall and gas phase moves upward, occupying the majority of the central part of the pipes, and forming a gas core, in both flow regimes. The model is validated using field and laboratory experimental data from several different studies from the literature, in terms of pressure along the wellbore or bottomhole pressure for field conditions (for high-pressure flows in long pipes, …

Expandable Proppants For Hydraulic Fracturing, Livio Yang Santos

LSU Master's Theses

Hydraulic fracturing is recognized as the primary technique to achieve economic oil and gas production from low permeability reservoirs like shale and tight-sand formations. One of the main challenges facing the oil and gas industry is maintaining the proppant functionality in the subsurface where replacement of proppant is only possible by expensive refracturing operations. Proppant crushing and proppant embedment have posed challenges for sustainable production from stimulated wells especially in soft and deep formations like Haynesville Shales. Experimental measurements show the strong impact of proppant stress and proppant embedment on reducing fracture conductivity. In this work, we introduce a new …

Development Of Single-Well Gas Assisted Gravity Drainage Process For Enhanced Oil Recovery, Bikash Deep Saikia

LSU Doctoral Dissertations

EOR application in prolific deepwater Gulf of Mexico (DGOM) reservoirs has remained a challenge. Exorbitant well cost (>200M$) precludes having extensive injection patterns and very characteristics of the reservoirs themselves are partly to blame for negligible EOR activity in DGOM. We have been able to develop and demonstrate a novel design in the form of Single Well – Gas Assisted Gravity Drainage (SW-GAGD) process, which is potentially cost effective, at the same time ensuring very high oil recoveries. In this design, a single well acts as an injector as well as a producer, thereby minimizing well cost. The efficacy …

Design And Analysis Of Geothermal Wellbore Energy Conversion System Working On Zero Mass Withdrawal Principle, Ildar Akhmadullin

LSU Doctoral Dissertations

This project is sponsored by the Department of Energy of the United States and dedicated to development of electricity production from the low-enthalpy geothermal reservoirs. The prime interest are reservoirs that are characterized by low temperature of heat source located in deep saline aquifers with high permeable rock. Usually energy production from these resources are not economical by using a conventional binary power plant approach. The presented PhD work is a study of a new system that utilizes a single-well technology and working on supercritical power cycle (PC). The wellbore energy conversion system is operating with Zero Mass Withdrawal (ZMW) …

Stress Corrosion Cracking Evaluation Of Carbon Steel In Biodiesel And The Effect Of Ultrasonic Nanocrystal Surface Modification (Unsm) On 304 Stainless Steel, Josh Geyer

Williams Honors College, Honors Research Projects

The project that was performed was stress corrosion cracking (SSC) of carbon steel in biodiesel, petroleum diesel and a mixture. The project also included the effect of Ultrasonic Nanocrystal Surface Modification (UNSM) on 304 stainless steel. It included the assembly of a slow strain rate (SSR) machine and carrying out testing using the SSR machine. The assembly of the machine will require purchasing and building a stand to house the electrical equipment which includes the computer, actuator control panel and the actuator power supply. The assembly will also include designing and purchasing the connections to connect the actuator to the …

An Integrated Completion And Reservoir Modeling Methodology For Horizontal Shale Wells: A Montney Formation Example, Rashid S. Kassim, Larry K. Britt, Shari Dunn-Norman, Bryan Lang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Montney Formation is one of the largest unconventional resources in North America covering from southwestern Alberta to northeast British Columbia. The Montney Formation has natural gas, natural gas liquids (NGL) and oil from conventional and unconventional reservoirs. The first multiple fractured horizontal well (MFHW) was drilled in 2005. However, since the first MFHW, different methods were proposed to optimize completion designs in the Montney Formation. Some of the optimized completions utilized the "operational effectiveness" of high-rate slick-water fracture designs while other designs utilized energized fracturing fluids. What has been missing was an integrated methodology that utilizes all available data …

Modeling Gas Inflow For Extremely Low Permeability Shale Using Cfd, Chatetha Chumkratoke

Doctoral Dissertations

"Computational fluid dynamics (CFD) has been used to model 2-D well inflow over a range of permeabilities to study the impact of various well completion strategies (Augustine, 2011). Augustine's 2-D model was subsequently extended for 3-D flow by Thepporprapakorn (2013), for gas flow in the permeability range of tight gas (0.01 mD).

This work presents a 3-D CFD model of gas inflow valid for extremely low ranges of permeability (0.00001 mD). In extremely low permeability, gas flow is complex and includes flow from fractures, flow through porous media, and diffusive gas transport. Diffusive gas transport is important when strong density …

A Petrophysical Evaluation For Permeability Of A Gas Reservoir In The Taranaki Basin, New Zealand, Musa Cetin

Dissertations, Master's Theses and Master's Reports

The goal of this study was to evaluate permeability and study the controls on permeability in a gas saturated formation. Conventional well logs, mineral identification crossplots and empirical models were applied to analyze different lithologic and diagenetic features and to examine the effect that these features may have on the reservoir. An unusual feature was observed, and required detailed examination: there existed (in two wells) five zones of lower resistivity (higher water saturation) above the gas-water contact. This is unexpected, as above that contact, the water is usually at irreducible water saturation. I conclude that the lower resistivity (the higher …

Design And Development Of A High-Temperature High-Pressure Rolling Ball Viscometer/Densimeter And Evaluation Of Star Polymer-Solvent Mixtures, Matthew Stanton Newkirk

Theses and Dissertations

Modern automotive applications such as transmission clutch plates, combustion chambers, diesel fuel injector tips, and axle gears and friction plates operate at temperatures that can exceed 250°C and pressures of 40,000 psia. Industrial practice is to add homopolymers and copolymers to base oils to modify bulk fluid viscosity and frictional properties for these demanding applications. However, designing polymeric additives for lubricants and predicting their performance is limited by the lack of available high-temperature high-pressure (HTHP) viscosity and density data needed to test contemporary lubricity models. Thus, a major objective of this thesis is the design, development, and commissioning of a …

Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue

Masters Theses

"Carbon Dioxide (CO₂) sequestration into porous and permeable brine-filled aquifers is seen as one of the most feasible solutions for reducing the amount of greenhouse gases released into the atmosphere from coal-fired power plants. To safely store the CO₂, it must be trapped under an impermeable rock acting as a seal. One of the concerns with CO₂ sequestration is the generation of new fractures or reopening of existing fractures caused by CO₂ injection in the sealing formation. This project evaluates the potential of sealing these fractures by injecting sealing materials into them. These sealing …

Numerical Analysis Of Flexural Slip During Viscoelastic Buckle Folding, Davi Rodrigues Damasceno

Masters Theses

"Flexural slip is considered to be an important folding mechanism contributing in the development of different folds such as chevron, and kink-band buckle folds. Various filed studies have provided a general conceptual and qualitative understanding of flexural slip. However, quantitative evidence of the importance of the flexural slip mechanism during fold evolution is sparse, as the actual amount of surface parallel displacement, and timing, is difficult to measure accurately, due to the lack of suitable strain markers.

In this study 2D finite element analysis is used to overcome these disadvantages and to simulate flexural slip during viscoelastic buckle folding. Variations …

Data Analysis Of Surfactant-Induced Wettability Alteration In Carbonate Reservoirs, Hao Sun

Masters Theses

"Most carbonate formations prove to be oil-wet due to oil aging effect. Therefore it is essential to employ wettability alteration methods for a more effective enhanced oil recovery process. It is confirmed by researchers that surfactant treatment has positive effects on wettability alteration of carbonate rock, from strong oil-wet to intermediate wet or to even weak water-wet. A number of experiments have the same conclusion and yet, a systematic screening guide development with the support of sufficient data analysis is lacking.

This study involves screening guide development for surfactant-induced wettability alteration method. 199 experiments collected from published literatures are analyzed …

Effect Of Reservoirs Heterogeneity On Injection Pressure And Placement Of Preformed Particle Gel For Conformance Control, Ze Wang

Masters Theses

"Preformed particle gels (PPG) have been successfully applied as a plugging agent for plugging fractures and then divert displacing fluid into poorly swept zones. However, PPG propagation and plugging mechanisms through open fractures have not been studied thoroughly.

This work investigated the influence of some factors (particle size, brine concentration, heterogeneity, and brine salinity) on gel injectivity, plugging performance for water flow through open fractures. Five-foot tubes were used to mimic open fractures. Three models were designed to conduct the work, including (1) single fracture with uniform fracture width, (2) single fracture with different widths, and (3) two parallel fractures …

Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang

Masters Theses

"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …